[Radeon] RX800SE problem

I bought MSI RX800SE-TD256 videocard and now I have a little problem. Along the card came external power cable, one end of the cable goes to the card and two other ends to power supply. Problem is that I can attach only one end (4 pin female) to my power supply, for the other one (4 pin male) I don't have a place. I tried to look if there is adapter on market that would change the male cable end to a female one, but I didn't found any.
And I should maybe mention that the card works somehow. But the difference in gameplay between it and my previous Radeon 9600 Pro is so small that I believe my RX800 doesn't get enough power.
Any ideas what should I do?
Please help.

quider,
The Male attachment is so you do not lose a plug.
If you have enough plugs on your Power Supply to power all your hardware, then leave the Male Plug empty.
Take Care,
Richard

Similar Messages

[SOLVED] Kernel 4.0 with Radeon HD problem: Purple Line

Hi All,
This is my first post on the Arch forums! and probably going to get flamed a bit too as this is not an Arch specific problem. I am just hoping you guys will be able to help point me in to the right direction. The reason I am posting here on the Arch forums as it does affect Arch Linux now the kernel package has ticked over to 4.0.
The problem, is that after updating to Kernel 4.0, there is now a vertical purple line on the left hand side of my screen as soon as X is started - when using HDMI. I believe the problem lies in the Kernel, how would I go about reporting a potential kernel bug and what kind of logs (and how) would they expect me to provide?
My hardware (Radeon HD 6570):
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 6570/7570/8550]
It works perfectly on 3.19 but 4.0 and 4.1-rc the purple line is present. In addition to the purple line, the display is not quite as crisp - slightly blurry.
I am using open source drivers - I have tried Mesa 10.5 and 10.6 (development) makes no difference.
Have tried on both Arch Linux and Linux Mint - again distro makes no difference.
Only happens when using HDMI out, VGA is fine.
Image: https://lh3.googleusercontent.com/-i_dX … 203014.jpg
Any help would be greatly appreciated
RESOLUTION: Bug Report @ kernel.org https://bugzilla.kernel.org/show_bug.cgi?id=97561
WORKAROUND:
xrandr --output HDMI-0 --auto --set audio off
PS. I learnt a lot moving to Arch... great distro!!
Last edited by rlees85 (2015-04-30 21:11:10)

I'm also having video issues since updating to kernel 4.0.1. A lot of video tearing and "glitching". I have a Radeon card as well:
$ lspci | grep Radeon
05:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Venus XTX [Radeon HD 8890M / R9 M275X] (rev ff)
I'm going to try and downgrade my kernel to confirm if that's the cause. There weren't many other packages that upgraded, though...
**EDIT** The kernel is definitely the issue, or at least something conflicting with the kernel. I'm having bad luck. This is the second package upgrade in a week to make my system screwy (wpa_supplicant being the first).
Unfortunately, I'm not real sure myself on how to go about filing an effective bug report. Once more info on that is forthcoming, I'll re-upgrade my kernel and provide any relevant logs, etc. Or file a separate report if the issues aren't closely related. Thanks!
Last edited by Forgotten Path (2015-04-29 20:48:07)

Radeon 9200 Problems Playing DVD

I am tryring to play a commercial Hollywood Video, Steven Segals Under Siege. It is playing just fine right now in my G3 Laptop and used to play just fine in my G4.
About 10 days ago I installed a Radeon 9200 ATI Card in my G4 in order to run my new 23 inch Apple Cinema Display.
Today I tried to play the Under Siege DVD in my G4. It plays for about 15 or 20 minutes then the computer screen goes black and the computer is frozen. I have to hit the reset button on the front of the computer.
I tried this 5 different times using Apples DVD Player Version 4.6.5. Same result. I then tried it using MPlayer & VLC Movie Player both of which I downloaded from Version Tracker. Same result. Freeze up & Crash.
Now all of the above happens when I am viewing the DVD with about a 6 inch screen. As I said I can get about 15 or 20 minutes then the freeze and crash.
But, if I set it to full screen, which I did with all 3 DVD players described above, it only takes about 5 minutes to freeze and crash.
Same thing happens when I try to play a Movie in Windows Media Player or Quicktime or Real Player at Full Screen Size. As long as I keep the size below about 6 inches it works. But when I try to go full screen size the Screen goes Black and the computer is running, I can hear it, but it will not respond to any key or movement of the mouse or to Escape. Must hit Reset Button.
I am thinking that this Radeon Card is the culprit. What do you think?
I know the Apple DVD Player works just fine as I am watching the Segal DVD on my laptop as I type this.
My computer works fine in every other way. Safari, Microsoft Word, Entourage, everything except playing the DVD or using a screen saver such as the Apple Beach Picture. Same Crash happens when I use it or any other large photo that covers entire 23 inch screen.
Thanks for your help. Bob
Power Mac G4 1.2 Mac OS X (10.4.6) Apple 23 Inch Cinema Display

I've been having a similar issue off and on for a while.
running OSX 10.4.6, 867 PPC G4
-ATI Radeon 9200:
Chipset Model: ATY,RV280
Type: Display
Bus: PCI
Slot: SLOT-4
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x5961
Revision ID: 0x0001
ROM Revision: 113-A27502-124
- Displays:
Cinema Display:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
My problem is a bit different than what Bob had posted about.
Whenever i play any movie (avi, mpg, wmv, ect) i'll occasionally get the entire display to freeze. EXCEPT the mouse curser and sound. This is using any video program: VLC, Quicktime, Safari, Firefox, ect.
Any MP3's I have playing in iTunes still play, Movie sounds can still be heard, I can move my mouse and when hitting command-Q a few seconds later I'll get the spinning beach ball for a while, which will then go back to the arrow. I can remotely log into my system from my windows machine and I tried to kill the running processes which didn't work. I than usually have to do a Reset by way of the button on the front (can hold the powerbutton and have it shut down too.)
I can't go back to my old Vid card cause than i couldn't use my spiffy LCD.
any help would be appreciated.
-Chaosqueued
G4 Quicksilver 867 MHz Mac OS X (10.4.6) ATI Radeon 9200 PCI, 23" Cinema Display

K8n neo 3 and radeon 9600pro problem !

ok have anyone have the same problem with radeon 9600pro like me. the card is agp slot and when starting the computer the screen doesent react at all its stay blank. but when putting the radeon 8500 it starts if anyone could say where is the click.... thanks
the mainboard is k8n neo 3 gold

Quote
Make sure in the BIOS it is set to run from AGP, if there is that option.
the bios itself detects if you use a pci express or agp card in the AGR slot, you cant configure it.
Quote
There have been some issues with the 9600 series and 8X agp / agp fast writes.
Try forcing 4X agp and turning off agp fast writes in bios to see if it at least boots for you.
there are no settings like fastwrites or AGP mode. the AGR slot only works with cards which are compatible.
have a look http://www.msi.com.tw/html/products/mainboard/agr/7135agr.pdf
i had luck my card works and is not on this list

RADEON IRQ Problem

I have a Radeon 9000 Pro vid card and an MAudio Delta 66 soundcard: http://www.midiman.com/products/m-audio/delta66.php
I am using Windows XP
The Radeon keeps following my sound card and won't take it's own unique IRQ.
I moved the audio card around but it keeps being followed by the video card.
I was told to change the computer from ASCI to standard PC mode. (I thought I did this during installation of Windows XP). See: http://www.pcaudiolabs.com/setup_tips/win2000.htm
I have to fix the problem because the shared IRQ causes loud squelches and pops on my audio card.
Is changing to PC mode my only option. do I have alternatives?
thanks.

Didn't try the external yet, i'll still try something with this.
:: Do you have a home network setup, or connect straight to modem?
straight to modem.
i doubt it is the audigy, it worked before... and i've disabled everything i don't need like onboard audio, onboard 1394.. (never installed 'em)
i noticed one thing: all people with similar problems are running win2000 SP4, you run XP so it's ok.
MS knowledge base says "If one or two registry hives consistently become corrupted for no reason, the problem probably occurs at shutdown and is not discovered until you try to load the registry hive at the next restart. In this scenario, the registry hive is written to disk when you shut down the computer, and this process may stop the computer or a component in the computer before the writing is completed." http://support.microsoft.com/default.aspx?scid=kb;en-us;822705
so something (realtek?) is writing to the registry while i shut down the pc.
i'm gonna disable realtek before shutdown & see if it boots without errors... if it does, i'll just have to disable it *always* before shutdown.... sounds like driver error for me?

ATI Radeon drivers problems (both open-source and proprietary)

Hi 2 All!!
I have a problem with my ATI Radeon 9000-series. The open source drivers (xf86-video-ati) don't work very good for me, my monitor's fresh rate isn't "at-top" and the monitor projection is slightly translated to the right (say 8-12 pixels). So I've tried to build the official drivers with ABS, all is gone successfully, except for some worrying warnings, but I thought that it's normal. I have a customized kernel, build through ABS... So, when I've tried to load the fglrx module it says:
# modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.27-ARCH/video/fglrx.ko): Cannot allocate memory
Please, help me! My machine is slow, I can't run any OpenGL-accelerated application, even Quake III!!! If you can suggest me how to improve the performance and how to resolve problems with open-source drivers, it also would be very good... Thank you and sorry for my poor English please.

I had some problems with installing ATI drivers recently (could not build fglrx module, not even manually, I had to change some installation script), but with latest driver version (8.11 I think) from ati.amd.com was everything fine (I have Radeon 9600 Pro)
Try to do this (and write here the output)
glxinfo | grep vendor
fglrxinfo
In both cases, it should write something like OpenGL...: ATI... if there will be MESA or DRI, that means that you don't have loaded your fglrx module.
If fglrxinfo output will be something like: no permission for...(should be first or second line of the output), then write this somewhere in your xorg.conf:
Section "DRI"
Mode 0666
EndSection
run:
modprobe -a fglrx - and give here the output. If there will be none, run:
lsmod | grep fglrx - to see wheter fglrx module is really loaded in kernel
if you will have no module, you can install one, type:
cd /lib/modules/fglrx/build_mod
sh make.sh
cd ../
sh make_install.sh (as root)
and post any warning or error here at forum, drivers (but not fglrx module) are installed at /usr/share/ati
After installing drivers, you also need to configure your system (notice your system that it's there), commands:
aticonfig --initial (for editing your xorg.conf)
aticonfig --overlay-type=Xv (acceleration support in xorg.conf)
Showing your xorg.conf file here is also good idea, here is mine (sections Device and Screen):
Section "Device"
#VideoRam 262144
# Insert Clocks lines here if appropriate
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

865PE and Radeon 9800 Problems

Hi,
I've searched the forum, but didn't found a solution. I have troubles with my sapphire radeon 9800 pro and the msi 865 neo 2 mainboard (bios 1.2) . If I try to set the AGP to 8x it will stay on 4x after reboot. This happens also with the enable fast write setting - it is also disabled after reboot. Of course, I've downloaded the latest drivers from sapphire website - with no luck. Is there a solution? Should an update of the bios help?
Regards
Josef from Austria
BTW, I'm have a 3 GHZ P4 and 2*512 MB Kingston HyperX3500 (SPD - stronger settings result in boot failures) but sandras memory bandwith benchmark shows only values of about 4400 MB/sec - with the bios fast setting (a Reference System with 865PE should reach 4800) - any recommondations how to reach such a benchmark values without overclocking ?

Hi Arthur,
thanks for your response. I've installed the additional powerconnector on the card. I use a 430 W enermax power supply. I think, it should provide enough power. But I didn't install the intel chipset drivers - maybe this would solve the problem. Another question to the benchmarks - I've updated the Bios to 1.3 and now I have values about 5000 in sandras memory bandwith (with fast enabled and no overclocking DRam settings are 2-3-2-5) but now my computer isn't able to wake up from standby - hi starts and after 3 sec hi stops working. The power off feature dosn't switch off the pc. If I change the timings to 2-3-3-6 everything will work fine (with lower benchmarks). So I search for a way that standby and poweroff works with the faster ram settings. Do you have maybe an idea?
Regards
Josef
Austria

ATI Radeon 2600 PROBLEM: First display wide and second not in mirror mode?

Hi all, I bought a new mac pro with ATI Radeon HD 2600, my problem is this: I have one LCD monitor widescreen 1680x1050 that i use like primary display and one normal CRT television 800x600 that i use like second monior... If i set the "mirror mode" on display the clone reduce automactly my LCD to not wide monitor and i see two black row... Is it possible use the mirror mode in two different monitor? it works only at 1024x768 not 1680x1050 is the video card not enough power? Should be fixed that thing ? Regards
Message was edited by: egariM

You did not understand the true intent of mirror displaying, which adjusts to the lower specifications of the two screens. You would not like to see your CRT display have to accept high bandwith 1680x1050 signal and fry would you ?
Neither is the reduction of the content of a 1680x1050 screen to a 800x600 acceptable, and not only because of the width/height different ratios : text would be pure garbage, except in huge fonts.
So your mac pro adjusted the display to the 800x600 your crt can accept, as my macbook would when connecting to a video projector for presentation, when in mirror mode.
This is obviously the best choice it could have done, you see...
Now, if you want to keep best resolutions in both screen, then you have no other option than to use extended desktop.
phjo

Ati Radeon X1950 problems

Hi everybody,
After using arch linux on my EEE PC for some months, I decided it to also install it on my desktop. I followed the wiki instructions but even from the first boot things started going wrong.
The first problem was a black screen in every boot. This was solved easily by disabling Kernel Mode Setting(added nomodeset in menu.lst).
However, after installing X(and KDE), more issues appeared. When desktop effects are enabled artifacts appear on the screen, mainly when moving windows.
To make matters worse the Xserver constantly crashes(when opening konqueror for example) and sometimes the system just freezes(this happened multiple times when trying to switch from kdm to TTY1). The Xorg.0.log contains pages of unreadable text after a crash.
I would have given up if I wasn't sure that my card can work just fine with the radeon driver. My graphics card used to work almost perfectly in Ubuntu for almost one year so I believe I'm doing something wrong.
The card is ATI X1950 Pro(r570).
Thank you in advance for any help!
Last edited by jimtb (2009-12-04 08:36:09)

I'm using radeon.
It didn't work. I compiled 2.6.32 but if I leave modesetting enabled the system freezes when proccessing UDev events.
Moreover, these entries appear in Xorg.0.log:
(II) [KMS] drm report modesetting isn't supported.
(WW) RADEON(0): [agp] AGP not available
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): [agp] AGP failed to intiallize. Disabling the DRI.
glxinfo says I have direct rendering but I can't enable compositing at all using the new kernel.
Last edited by jimtb (2009-12-04 13:44:16)

Radeon Drivers problems with BootCamp Windows 2008 Server R2

Hello !! I have some troubles with BootCamp and Windows 2008 Server R2... I can't find any graphic drivers for my AMD Radeon HD 6490 !! Heeeelp please
(I Have a Macbook Pro i7)

Shoooryuken, did you ever get this problem resolved? I have thhe same issue...
I have the 2011 MacBook Pro 15" 2.0ghz Quad Core i7 with integrated Intel HD Graphics 3000 and AMD Radeon 6490M.
I just installed Windows Server 2008 R2 (Which is based on Windows 7) using Boot Camp. After I installed it, the I only have 3 resolution options, all of which are stretched. I checked the device manager and found that the Apple Instal DVD did not work and only a "Standard VGA Graphics Adapter" was installed. It also reports a whopping 16MB of graphics memory
I downloaded the "detect and install" driver utility from AMD (http://support.amd.com/us/gpudownload/Pages/index.aspx) and it detected my correct OS and downloaded something (driver maybe?). When I clicked install, I recieved this message: "AMD Catalyst Mobility cannot be downloaded due to incompatible hardware/software on your computer. Your computer does not contain a proper graphics adapter."
I don't really know why Windows does not detect the graphics card. Right now I am trying to install the Intel graphics drivers for the Intel HD 3000 integrated graphics... I will report back if I get the integrated graphics running...

K8N Neo platinum + RADEON 9500PRO problems

Hi I got my AMD64 system up and running friday, but I got some major problems with the stability! The computer randomly "freezes to death", everything freezes, no bsod, only option is the sweet restart button :( This especially happens after I have quited games or 3dmark (which is really wierd). It is very unstable, often freezes right after boot in windows. I have now tested the system for an hour with a TNT2 card with no freezes. Could my problem be a hardware conflict? My voltages is normal (12v 3,3v and 5v are reportet ok by MBM5, with 12.10v on the 12v rail, btw mbm5 reported the same voltages with 9500pro installed).
The 9500PRO card worked fine on my old abit kt7a via 133a chipset and t-bird 1,4ghz.
Edit: I have all the newest drivers for all my HW + newst bios reported by msi live update (1.40)
HW:
MSI K8N NEO Platinum
AMD64 3000+
Radeon 9500PRO (now testing TNT2)
2 IDE disks and 1 s-ata disk
dvd-rw
4 case fan with coolermaster aerogate 2

dont worry about your memory- it'll prob be ok if memtest doesnt fire any errors. - its probably your PSU
For a start disconnect any extra fans you got running on your system
then boot and test it - if that works - the problem is your PSU - usually the main problem for the Athlon 64 boards - oh and any other crap like front function panels etc. etc.
If it is the PSU i'd recommend getting a Overclockers one - they rock - dont get the one I've got - it only JUST cuts it - i used to get the same probs as you until I disconnected all my internal fans - no probs now.
If its not the PSU - dunno mate - solly!
It probably is the PSU as you dont know your PSU loads - you need a minimum of around 20AMPS on the 12Volt rail.

AMD Radeon Driver problem in Pavilion dv7 notebook

I have a pavilion dv7 notebook and for the last couple months I have been experiencing problems with my graphics driver.
It began with a notice that my driver was out of date, so I went to the AMD website and attempted to install the update. I ran the dxdiag tool to find that I have a AMD Radeon HD 6620G graphics card. I could not find my product on the list to manually install the update, so I tried the amd driver downloader tool and it had a problem recognizing my graphics card. I then tried to update it through the HP Support Assistance and that seemed to work for awhile.
Yesterday my screen changed to the lowest resolution and a notice came up that it wasn't recognizing my graphics driver. I have again tried to manually update from the AMD website. When that didn't work I downloaded the AMD driver downloader and after installing all it told me is that "your computer does not contain a proper graphics adapter" and closed the program.
I am uterally lost at this point, and any assistance would be greatly apreciated.
This question was solved.
View Solution.

***** Disclaimer*****
This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
AMD doesn't support the custom HP graphics system and will not provide drivers for it. Typically, HP doesn't provide "routine maintenance" updates and generally only releases updates to fix known issues. You could take the computer to a professional, however they will be capable of doing nothing more than I have suggested and maybe not even that much.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

AMD ATI RADEON 6770m problem after update YOSEMITE 10.10

Hello, i'm passing thru a very hard problems, I'm using a :
Model Name: MacBook Pro
Model Identifier: MacBookPro8,3
Processor Name: Intel Core i7
Processor Speed: 2.4 GHz
Number of Processors: 1
otal Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.70f6
AMD Radeon HD 6770M:
Chipset Model: AMD Radeon HD 6770M
Type: GPU
Bus: PCIe
PCIe Lane Width: x8
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6740
after call many times to apple support made smc reset , PVRam reset, reinstall yosemite i paid for a tech made some BGA on my mac, it works for 1 week now i'm again with the same problem ... so i moved the amd .kext and controller .bundle to /DisableExtensions but remained on the folder ... i connected my canon T2i and when iPhoto starts the amd start work and my machine sttoped .. reboot now when i boot the machine only
amd radeon is working i tried change the card with gfxCardStatus but i can't
and there's no second display connected here...
so what it can be ?
Model Name: M

Remove Login Items to test.
Open System Preferences > Users & Groups then select the Login Items tab. Remove all items. Restart your Mac to test.
And remove all items from: /Library/StartupItems then restart to test.
Not enough free space on the iMac disk can slow startup time.
Click the Apple  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
If it's not a login/startup items or disk space issue, check the hard disk using Disk Utility.
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If Disk Utility reports errors, restart your Mac while holding down the Command + R keys.
From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk and restore OS X.

Radeon 8500 problem

i have a problem with my MSI (MS-6566) for P4 DDR with my ATI Radeon 8500 64DDR. it hangs (crash) the system with vertical lines when i run any large game (DitectX or OpenGL) or even a heavy video. i updated the bios and drivers of both motherboard and vga card but nothing changes.
i am very mad about this proble ;( . can anybody help me

http://www.pcreviewspot.com/reviews/misc/coolmax470/wattages.jpg
this one for the 470 watt model has a combined of 235 watts
and gives 28a at the 3.3v and 47 a at 5v
need the corresponding data from yours
if its an 845 Ultra-C then a bios upgrade may help as well
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=35%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6566

Please help me with those Radeon minor problems.

Hello everyone, last night I have spent 4 hours for installation of my arch.
I have installed xorg111, catalyst, xfce, compiz-fusion, awn
after I installed everything i was a bit disappointed, because when i start compiz fusion
i have some graphical glitches like when i Right Click on desktop for xfce menubar->applications
i see only border with transparent menu where only my rollover highlights menu components.
I could not fix that, i don't know how to do it.
aside from that glitches GPU is working very good in 3d applications like 0ad, Heroes of Newerth.
please anyone help me, I love ArchLinux very much, i don't want to use Ubunu distros, i must use Proprietary drivers
because of some games

Ok so i looked at the settings for both original movie and new copy and pasted one. I am not sure what to look at, but here are all of the settings.
original -- New
Tracks- 4V 11A -- 3V 8A
Audio- 2 Outputs -- 2 outputs
Frame Size- 720 x 480 -- 720 x 480
Vid Rate- 29.97 FPS -- 29.97 FPS
Compressor-DV/dvcpro-ntsc -- DV/dvcpro-ntsc
Aud rate - 48.0 khz -- 48.0khz
Aud Format- 32-bit floating point -- 32bit floating point
Pixel Aspect-Ntsc-ccir 601 -- Ntsc-ccir 601
Anamorphic-yes -- no
Field dominance- lower even -- lower even
The only difference i see here is the anamorphic setting. When i click it "on" in the new video it just stretches the picture. It does not get rid of the black wide screen lines.
I have been editing on this new timeline for some time now. Is there anyway i can salgave this project and not have to start from the begining again with a duplicate? I have been looking like a mad man to find where the settings are different.
I was able to recreate this problem at the apple store in front of the rep by doing the steps i originally posted. The apple rep didnt seem to understand why that happened.
Message was edited by: erickcantu

[Radeon] RX800SE problem

Similar Messages

Maybe you are looking for