Radeon X1900 XT replacements?

I have a first-generation Mac Pro (MacPro1,1) with Tiger, and an ATI Radeon X1900 XT. For reasons that I’m sure are clear to anyone familiar with the X1900 or its reviews, I’m looking to get it replaced. What are my options?
I know Apple sells the NVidia GeForce 8800 GT, which is cheaper and seems to give better performance, but it requires Leopard. Can I get away with upgrading my card without upgrading anything else?

I think it would be best to upgrade the OS, if that is what needs to be done. If have legacy apps that need to run on tiger, perhaps dual booting would be an option. Or, if you can...hold out till snow leopard drops sometime in July.
I think the things that are limiting compatibility is probably the graphics drivers which are included in leopard 10.5.x

Similar Messages

What is a good replacement for the ATI Radeon X1900 XT on a late 2007 Mac Pro

I recently took my late 2007 Mac Pro to the Apple Store because it was running quite loud. They diagnosed the problem as the fan on the ATI Radeon x1900 XT video card. Whie the card works fine otherwise, I was thinking of replacing it. I noticed some online recommendations that I need to upgrade to perhaps the Radeo HD 4870 if I want to install FCP X on this machine. I do use the Mac Pro for video editing, but haven't switched yet to FCP X. Anyone have a suggestion on a replcement video card that will work both on this machine and will be compatible with FCP X.
Thanks for any advice.

<http://store.apple.com/us/product/MC742ZM/A/ati-radeon-hd-5770-graphics-upgrade- kit-for-mac-pro-(mid-2010)>

The AVI Radeon X1900 XT video card in my Mac Pro Dual-Core went bad and I need to replace it. I found one that is $250 but I don't think that I need the gaming-type processor. I am using a 23" Apple Display. Are there lower cost options? -C

The Radeon X1900 XT video card went bad in my Mac Pro Dual-Core Intel Xeon. (I tried it with a good one at the office). I found one online that was $250. I don't need the gaming capacity of this card and was wondering if there were less expensive video cards that I could use in this machine. I run Adobe Creative Suites for graphics design and have a 23" Apply display. Thank you for any help that you can provide. -PretzelMcK

Then pick up the ATI 5770 AND upgrade to 10.6.8.
Same price for a good card that will work and helps to have 1GB VRAM.
There aren't any other real choices let alone less expensive.
Even the ebay links I had and not a lot of choices.

NVIDIA GeForce 120 or ATI Radeon X1900... which is better?

Hi-
I currently have the ATI Radeon X1900 graphics card installed in my Mac Pro 2.26 Nehalem. I'm not having any issue's with the card except that the fans turn On quite frequently, and they're a little loud.
I'm not using it for any games, etc... My primary use is with Pro Tools (a music DAW application).
The ATI Radeon X1900 is running a Apple 30" display and a Sony Bravia 46" LCD.
If I replaced the ATI Radeon X1900 with a NVIDIA GeForce 120, would I be asking for trouble?
Thanks in advance.

If I replaced the ATI Radeon X1900 with a NVIDIA GeForce 120, would I be asking for trouble?
If your Mac Pro came with ATI Radeon X1900, then it needs a card with EFI-32 firmware. The NVIDIA GeForce 120 has EFI-64 firmware, and won't work in the pre 2008 Mac Pro. The only upgrade for early Mac Pros is the ATI Radeon HD 4870
<http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=MTA4MzU2NTc>
(Despite what Apple says, it will work in any Mac Pro.)
You will need a Mini DisplayPort adapter for the second display,

Please help: what options do we have other than ATI Radeon X1900 XT

I think my video card (ATI Radeon X1900 XT) is about to die and I'm trying to figure out what to replace it with. (I'm on a 1st gen MacPro, still on Tiger).
What I can't easily figure out from this site, however, is a list of alternative cards I could purchase that will fit in this machine. I gather from the ratings that the ATI X1900 has failed for just about everyone that has used it intensely. And I'd like to avoid buying the same one that is about to fail for me now, but how can I tell what my alternatives are and if they will fit in the slot and/or be compatible with my machine?
I have been to the Mac Pro spec area, and it lists these as the "build to order" options:
* ATI Radeon X1900 XT 512MB (two dual-link DVI)
* NVIDIA Quadro FX 4500 512MB (stereo 3D, two dual-link DVI)
* Two NVIDIA GeForce 7300 GT 256MB
* Three NVIDIA GeForce 7300 GT 256MB
* Four NVIDIA GeForce 7300 GT 256MB
are those the only cards I can choose from? Are there any other better options?
Forgive me if I sound like a totally idiot. I'm just trying to learn...

You should visit Bare Feats and see the various reviews and benchmarks. You have several options now available besides the ones that came originally with your model. There is now an NVidia 8800 card in a version for pre-2008 MPs, the ATI 2600, and the new ATI 3870 just released. You can learn more at Bare Feats and by searching the MP forums.
You have posted this topic in the MacBook Pro forum which is the wrong forum for your question.

Signal Problem MacPro 1.1 w/ATI Radeon X1900 XT

Before I run out an purchase a new video card wanted to run my issue by the forum. I have a MacPro 1.1 (early 2007) with a ATI Radeon X1900 XT card. When booting up recently my screen is blank, no signal. If I switch video ports it fires up.
Is this a video card issue or something else with the OS (running Mac OS X 10.6.6 (10J567))?
Would appreciate a little insight from the forum.
Thanks,
Koyangie

1. There was a replacement program that ended 1/31/2011 for some X1900
2. Any owner by know should have known and been doing a good deep cleaning for dust, and upping the system fans a tiny notch (900 rpm is quiet but more efficient) to keep more air circulating
3. While you can't directly measure GPU temps, you can with other sensors
4. Do you hear the video card fans or system fans working hard?
Poor design with the cooling chamber on X1900 made it a dust magnet and headache.

Is the Flash player GPU acceleration supported on the ATI Radeon X1900 XT?

Anyone know if Flash player 11.1.102.55 GPU acceleration is supported on the ATI Radeon X1900 XT? I didn't see it explicitly listed in the unsupported hardware list (http://kb2.adobe.com/cps/921/cpsid_92103.html). The card is not displaying any of the stage 3D content unless I disable hardware acceleration. I get the same results whether I use Firefox, Chome, or Safari.
I'm on a Mac, my system specs are;
Processor 2 x 3 GHz Dual-Core Intel Xeon
Memory 2 GB 667 MHz DDR2 FB-DIMM
Graphics ATI Radeon X1900 XT 512 MB
Software Mac OS X Lion 10.7.2 (11C74)
If I need to I'll replace the card but I want to make sure it's the issue before I do.
Thanks in advance for any insight.

I'm wondering the same thing. I have an X1950 pro and am trying to get it to help out with youtube videos.
The latest X**** driver was released in 2010, and the original driver at the very earliest March 2009. Both the X1900XT and X1950 Pro are not listed on that list.
However, I do recall feeling Flash player 11 being slightly faster than Flash 10 when I first installed it. Flash still didn't become "10x" faster and 720p through 1080p video certainly still isn't smooth.

Leopard ATI Radeon X1900 XT Freezing Issue, fixed with 10.5.2?

Mac Pro (8-core) original 3.0Ghz 8 core. Purchased October 2007. Ran Tiger 10.4.10 from the box. updated to 10.4.11. ATI Firmware update was not required as it was pre-installed. Never had a crash. Installed Leopard 2 days after release. Installed 10.5.1 the day of release. No problems so far...
A week later watching the "Jelly" iTunes Visualizer, the Screen froze, but iTunes kept playing... The machine was reachable over SSH but very much useless as a reboot command hung. Hard reset, went about my business. A day later unit froze during iTunes Jelly Visualizer again. this time music also crashed. As I approached to reboot the unit noticed very loud video card fan noise. Extracted the burning hot card, later compress air removed some clogging dust bunnies. Reinstalled card and no more freezes for 2 weeks. Freezes again, this time watching youtube in Safari. Made sure data backup is up to date. Performed an Archive and Install of leopard, ran all updates to 10.5.1. This time Mac Pro was fine for a week .... *Freeze*.
Called apple care, after having to explain to a rep what itunes visualizer was, referred to iPod specialist, who transfered me to Mac Pro specialist, 1 hour later, thoroughly explain issues to rep, who after 45 minutes was convinced issue with HW and not SW . Apple sends Do It Yourself repair video card. I replaced it. 4 days later unit Froze again. This time watching movie on VLC...
A week later 10.5.2 was released, and shortly thereafter Leopard Graphics Update 1. So far **nervously knock on wood** no more freezes. I am hoping that whatever black magic was included in these recent updates fixes the Leopard crashes with ATI Radeon X1900 XT. Needless to say this is the last ATI Radeon I "buy".
I need to know and track other users findings issues and experience with Leopard and the ATI Radeon X1900 XT on a Mac Pro. Been reading about a lot of issues with Leopard and the ATI Radeon X1900 XT on the these boards. Google turns up info galore. ...
I am holding my breath

Spoke too soon. Today as I was leaving the house I set the Mac Pro to sleep. When I attempted to wake the machine upon return, display 1 became all garbled. Display 2 was still visible and the mouse moved, but I was not able to click any windows. I ssh'd in with my macbookpro and was able to do a "sudo reboot". In the process it got stuck and in a loop I received:
Feb 17 16:02:37 octagon kernel[0]: ** ASIC Hang Log End **
Feb 17 16:02:38 octagon kernel[0]: ATIRadeon::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 0, need 5. RBBM_STATUS 0x9001c100
Feb 17 16:02:50 octagon kernel[0]: ** ASIC Hang Log Start **
Feb 17 16:02:35 octagon kernel[0]: 860:0x02090000
Feb 17 16:02:35 octagon kernel[0]: 861:0x00002808
Feb 17 16:02:35 octagon kernel[0]: 862:0x00020004
Feb 17 16:02:35 octagon kernel[0]: 863:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 864:0x00840000
Feb 17 16:02:35 octagon kernel[0]: 865:0x00008020
Feb 17 16:02:35 octagon kernel[0]: 866:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 867:0x0a040000
Feb 17 16:02:35 octagon kernel[0]: 868:0x00010000
Feb 17 16:02:35 octagon kernel[0]: 869:0x00002808
Feb 17 16:02:35 octagon kernel[0]: 870:0x00020004
Feb 17 16:02:35 octagon kernel[0]: 871:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 872:0x00040000
Feb 17 16:02:35 octagon kernel[0]: 873:0x00008024
Feb 17 16:02:35 octagon kernel[0]: 874:0x00100100
Feb 17 16:02:35 octagon kernel[0]: 875:0x0a040000
Feb 17 16:02:35 octagon kernel[0]: 876:0x02090000
Feb 17 16:02:35 octagon kernel[0]: 877:0x00002808
Feb 17 16:02:35 octagon kernel[0]: 878:0x00020004
Feb 17 16:02:35 octagon kernel[0]: 879:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 880:0x00840000
Feb 17 16:02:35 octagon kernel[0]: 881:0x00009020
Feb 17 16:02:35 octagon kernel[0]: 882:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 883:0x0a040000
Feb 17 16:02:35 octagon kernel[0]: 884:0x02090000
Feb 17 16:02:36 octagon kernel[0]: 885:0x00002808
Feb 17 16:02:36 octagon kernel[0]: 886:0x00020004
Feb 17 16:02:36 octagon kernel[0]: 887:0x00100000
Feb 17 16:02:36 octagon kernel[0]: 888:0x00840100
Needless to say I had to hard reset....

ATI Radeon X1900 XT, Apple Upgrade Kit vs. BTO Option (Mac Pro 1,1) - Same?

This question pertains to the ATI Radeon X1900 XT Video Card, which Apple offered as a BTO Option for the Mac Pro 1,1.
In September 2007 I purchased my Mac Pro 1,1 (2x Intel Xeon 3GHz Woodcrest) and configured it from Apple with the ATI Radeon X1900 as a BTO Option.
Now I know that a number of people initially experienced some problems with this card, but mine has worked perfectly all along. I run FCP, Aperature, and Adobe CS3, and the X1900 has performed excellent.
Leading to my question:
I own more than one Mac Pro 1,1. But the other two machines were not configured with the X1900. And for the past couple of years, I've been regularly searching to find (one or more) Genuine, Original Apple ATI X1900 XT Video Cards - either for sale by someone who has pulled out the X1900 from their Mac Pro 1,1; or, from an Official Apple Reseller. However, all that I've been able to find are - what appear to be either a "knock-off" third party version of the X1900 (flashed for Mac Pro), or; people and/or resellers who claim they are selling a Genuine, Original Apple ATI X1900 XT; except there's one major difference between all of those other video cards, and my X1900 (BTO from Apple, Mac Pro 1,1).
My X1900 does not have an S-Video Port. However, all of the other X1900 cards I've seen advertised for the Mac Pro are pictured with an S-Video Port - which again, mine does not have one.
I've spoken with both Apple Technical Support and Apple Care Representatives (Sr. Advisors), and I've asked them whether it's possible to identify a Genuine, Original Apple X1900; either by the serial number, or possibly by an Apple Part Number.
The Mac Pro 1,1 "Tech Specs" are listed on Apple's Support Site (support.apple.com/kb/SP30). Here, Apple does provide an Apple Part Number for the X1900 as an upgrade (MA631Z/A); however, nobody from Apple can tell from that part number - whether that Apple Part Number corresponds to an X1900 with an S-Video Port, or whether it's identical to the X1900 that was offered as a BTO Option for the Mac Pro 1,1; or whether that particular X1900 was part of an "Upgrade Kit" for the X1900 - which would've been available to purchase from Apple (Apple Store), sometime late in 2007 and/or early 2008. Further, I also know that Apple changed the actual Service Part Number a few times for the X1900.
What I'm trying to find out:
Has Apple ever directly sold, or, has Apple ever officially offered the X1900 w/ S-Video Port - under one of the following Apple Service Part Numbers (661-3297, 661-4335, 661-4911)??
Sorry for the super-long post.
It's just that this has been bugging me for like two years.
Thanks,
John

When I write, I often find that I end posts with what I wanted to say. Put summary at top helps.
What I'm trying to find out:
Has Apple ever directly sold, or, has Apple ever officially offered the X1900 w/ S-Video Port - under one of the following Apple Service Part Numbers (661-3297, 661-4335, 661-4911)??
I don't know. I do know some X1900s are being replaced even if out of warranty, as are 2600s also.
For $249 the ATI 5770.

ATI RADEON X1900 XT Bad resolution display with SNOW LEOPARD

Hi all!!
I just install a clean version of snow leopard 10.6.2 on my mac pro and everything works good.
Only problem I have, less resolution choice.
I am stuck with 1600x1200 60 Hz but before I was in 1600x1024 76hz.
This mac has a ATI RADEON X1900 XT graphic card.
I try on different mac pro with geforce and the resolution display is good.
It is not the problem of the graphic distorsion in top site of safari,
It's totally in the display.
Thank you!
BP

I use the same video card without any difficulty, under 10.6.2, in an older MacPro. If your card works OK in Leopard, then it's not likely to be a hardware problem. If it happens in Leopard, too, then a hardware failure is possible.
If this happened to me I'd clean the card's contacts, make sure that its supplemental power connection was tight on both ends, and re-install the card.
If the problem remained, I'd try the card in a different slot. If it persisted, I'd do a clean-install on a different drive and boot from it. If the problem recurred with a clean-installed second boot drive, then I'd suspect a hardware problem on the card or, less likely, on the logic board.
At this point I'd visually inspect the "GPU PRESENT" LED on the logic board, under the memory cage, next to PCI slot 1. As you use something completely non-conductive to press the "DIAG LED" button, which is adjacent to the diagnostic LEDs, see if the "GPU_PRESENT" LED comes on. If that LED stays off, it means the machine's EFI (extensible firmware interface) was unable to configure the graphics card, which would indicate a hardware problem on the graphics card, or possibly on the logic board. If the diagnostic LED comes on, it means EFI could configure the card. This does not necessarily mean that the card is functioning properly. The LED staying off, however, would strongly suggest some kind of a hardware problem.
If you have access to another graphics card, see if a similar problem occurs using it. Short of a thorough circuit-check in a shop, that's the only practical way to determine if it's a PCI card or logic board problem. Either way, there'd be a hardware repair/replacement on the horizon.
Message was edited by: Hominahomina

ATI Radeon X1900 vs Nvidia Ge Force 6600

I predominantly edit video, create graphics using Adobe CS2 and animate and composite using After Effects.
I currently have a Nvidia GeForce 6600, and I was wondering if the ATI Radeon X1900 will be a significant upgrade. Has anyone used both of these cards and noticed one was better than the other?
Also in system profiler the GeForce 6600 is listed as a PCI card, so this should mean that I can install the ATI Radeon X1900 G5 Mac Edition?
thanks.

Adding additional RAM will definitely help. AE7 and higher can address up to 3 GB of RAM by itself, and this is directly related to the length of the RAM preview you can do.
If you're doing a RAM preview (or a render) in AE, open up Activity Monitor located in /Applications/Utilities. What you'll notice is that most of your CPU is not being used effectively. Nucleo & Nucleo Pro launch background instances of AE and this causes your CPUs to be fully utilized, hence the reduction in time needed to do a RAM preview or a render.
One of my favorite features is the Speculative Preview that does RAM previews in the background without the user having to invoke them. It automatically RAM previews your work area, and if you make a change to something, it throws out the frames that need to be updated and immediately starts RAM previewing the new frames. So, by the time you're ready to preview your work area, it's probably already been rendered!
The background renderer is also great. You put a composition into the render queue and Nucleo Pro starts rendering it in the background. This means that you can go back into AE and keep working on something else rather than having to wait until AE finishes rendering what's in the queue.
Take a look at the product overview in the link in my previous post so you can see if it's right for you. There's also a demo version that watermarks everything so you can get a feel for how it'll fit into your workflow.
If you decide that you don't need all the features that Nucleo Pro has, you can get the standard Nucleo which does RAM previews only for AE 7 and 6.5. If you're upgrading to AE CS3, this basic functionality is built-in, so you won't need Nucleo at all except for the additional features that Nucleo Pro offers.
In GPU accelerated programs like Motion, the memory on the video card can matter. Each element is treated as a texture and has to fit in the video card's onboard memory for best performance. If you have many elements that you're working with, it's conceivable that you'd fill up the card's memory and hurt performance. For a G5, the only available 512MB card is nVidia's QuadroFX 4500 which is incredibly expensive. It was only available as an option at the time the computer was built, so to get one now means you have to get it as a replacement part, and that'll set you back ~$1,500. Not worth it, in all but extreme cases.

ATI Radeon X1900 Version 2? Anyone know about this?

Well, my ATI Radeon X1900 is burning out and keeps crapping out. After Apple looked at it, they decided to give me a new card. It's a Do It Yourself, so they're sending me a replacement card and I send my old one back.
However, they said they're sending me a newer version, Ver. 2 as is stated in the e-mail, and he said the card's the same with some changes. But he didn't state what the changes were.
Anyone know what version 2.0 does differently? Is it just more efficient? What're the changes? I can't find anything on this, so I thought I'd ask here.

Had there been a ROM revision it would have been made available to "rev A" cards via Software Update.
Apple has not, to my knowledge at least, ever supplied a ROM update for the ATi X1900 XT. Up until now all updates have been supplied via software (the driver) which does not affect hardware and hence, ROM version will be unchanged.
Additionally, anything that involves flashing firmware will always be delivered as a standalone updater and not as a standard updater. It'll have the same process as our MP's firmware updates due to the higher chance of failure. As far as I know none of these has passed our way.
any significant hardware been changed on the card other than the cooler, there would be multiple KB docs on it.
Any documentation that would accompany a revision update would rarely, if ever, be a KB document but part of the developer hardware notes, if even then. Apple's hardware updates and revision changes which do not result on a model change normally pass without any documentation at all.

Crash with ATI Radeon X1900 XT and second HD display (DVI) ?

hi ! i have a realy tough one for you guys : since 3-4 days i've been getting this realy strange (and scary!) kernal panic screen / crashes / freeze with my macpro dual 2.66 with ati radeon X1900 xt.
the crashes keep coming while doing extensive work (video converting, renders) or just letting the macpro running doing nothing much all night long...
now this is what i found for now : if i disconect my 2nd display (samsung syncmaster 2493hm HD in DVI 1080p) it seem to be stable. when i reconnect it sometime it can run again with this 2nd display for a while but when i leave a render all night long the next morning it will be frozen, nothing on screen (all black).
after rebooting it get this crash report from the system :
Maccinachheeke-pabcapk cat0etiabies 0x00000000000000000000006:
6 ereerr--i oporgingngnkbeaachineck Maehik ne-a0h0h ck stat00t000000000 r0es0
reteattartPvvl Ili maaliceicdn mchk aiog eproMh
rekroi-MCpor reorrosg-:
porttMCrSTregt(i_MC 0xSTATUS(er40_S x20210(0x0nv0TalU00xx002in000iS10000002405)100l00U I0nva0M 0xS
IS(0x0A30:_M0U2(00ATU5S(2xx00200TA00000x00400000IAinv2li00lC
20IAA00200_inv0xid
0IA3: 3_d0000AT0)000000d)0000n00a00d000nA0v0l0d
I3S22_v4USi3SIA0411): 0400 0x0U0000020000 00100 00vl00
0 I0A3011CivAA32_SM_441SxTUTb0004100)000vb01001iA 00led 0I cva00 i e r cI:S(0xe0 1 ):(0 : 041e5)b x000b 800de:fix 4arrld
Mo MAA e8atr code inf 00: 0 0x00 St
00s00ode
spSccifsic codr
texr ccorre02sor:
0 8O4x0
r erder in orrmt n ded0000: 0x1rp0000Satus bitts:
b 0ts:4ssor PMroexce Chtsscorrupt, tconad:
e0x3re1cor,rtr epo:bl ed err: E0)roncirters0: 0
8ernc0ro,rrR2: 0xected error
CR3: 0x00e7a000, CR4: 0x000006e0
EAX: 0x24f9bed8, EBX: 0x1a6f198a, ECX: 0x1a6f198a, EDX: 0x004bc870
ESP: 0x24f9bebc, EBP: 0x24f9bf08, ESI: 0x00001e27, EDI: 0x035e1718
EFL: 0x00000006, EIP: 0x0019e9c0
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x439d58 : 0x128d0d (0x3cc65c 0x439d7c 0x131f95 0x0)
0x439d98 : 0x1a42cb (0x3d27fc 0x0 0x35e1718 0x12)
0x439f58 : 0x19c103 (0x439f70 0x0 0x0 0x0)
0x24f9bf08 : 0x135888 (0x1a6f164f 0x35e3d40 0x3f91084 0x2)
0x24f9bf58 : 0x1359c9 (0x13d8a2 0x0 0x0 0x19e23a)
0x24f9bf78 : 0x13da53 (0x13d8a2 0x0 0x0 0x0)
0x24f9bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4ebf4c0) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 2 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.13.1)
Network Service: AirPort, AirPort, en2
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: ST3250820AS P, 232.89 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: GSA-5163D Super Multi DVD Rewriter, HL-DT-ST, Up to 400 Mb/sec
FireWire Device: My Book Device, WD, Up to 800 Mb/sec
here's my complete config if it can help :
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B04
SMC Version: 1.7f8
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140
Displays:
SyncMaster:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
S/M 955SL:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
anyone ever see this problem ? at 1st it seem to be related to my ATI card... but i'm no expert so if anyone can understand part of the crash log let me know ! thanx !!
also forget to say : did all the full apple hardware test + tech tool pro test (app that come with apple care) and nothing was wrong, all ok.
+
francis.t
montreal
Message was edited by: francis.t

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

GPU enhancement issues with ATI Radeon X1900 XT

Upon startup, PS CS4 turns off GPU enhancements and displays the following error message:
"Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software."
Problem is, according to all the research I've done, PS should be perfectly compatible with my Radeon X1900 XT card. To further complicate things, ATI does not appear to have driver updates for Radeon X1900 cards for Intel Macs on their website. Even a Google search doesn't seem to bring up any sites with the drivers. It's maddening!
Is anyone having similar problems, or can anyone offer advice? All Adobe and Apple support seem to recommend is updating my drivers, but of course that doesn't seem possible. Thanks!

I'm having a slightly different problem, but it fits in with what others are saying. I upgraded to CS4 the other day, and starting that night my system (a Mac Pro with the Radeon x1900 card) I have had issues with my display - that is, sometimes the display won't work after waking from sleep. The display is a 23" Cinema.
The rest of the system is fine (I have a laptop so I can peek in and control it remotely), and everything is just as I left it. The display itself responds to being turned on and off using the power button on the side (that is, the tiny light on the front turns on and off...). But the screen itself is pitch black, off entirely.
I took out the video card and it was, indeed, black on the intake with fine dust, so I cleaned that as best I could. That did not solve the problem, however.
Pull the plug to my desktop and plug it into my laptop, and it works just fine. Plug it back into the desktop...dead. The only thing that seems to fix it is shutting it down for a time. I don't know how long is required but it's more than a few minutes (so it's not a simple reset) and it's only been a few days and so far I've just gotten frustrated and left it over night - so it certainly could be related to cooling down.
Seems like Adobe is the culprit as the problem has *never* happened before, and has happened every day since the very day I installed CS4. I'd be reluctant to believe it...if I hadn't spent hours just upgrading to CS4 (I won't go into the legendary problems which plague Adobe's installers).
Given that when I bought this system a couple of years ago this was one of the few video cards I could choose, and it's the high-end of the bunch, there must be a lot of folks out there with this set-up plus CS4...
Sounds like the suggestion is to inhibit performance in CS4 so it doesn't fry my video card? I am running Temperature Monitor, but it doesn't show me that particular stat...

Nvidia GeForce 7300 GT and ATI Radeon X1900 XT

I have a Mac Pro 2,1 running 10.6.1 and BootCamp.
I had a Nvidia GeForce 7300 GT video card in it and it ran well under BootCamp.
I installed a ATI Radeon X1900 XT.
Under BootCamp the 2 cards seem incompatible, with an error message that the driver on the Nvidia card has been disables due to an incompatibility with the other card.
Is there a solution for this?
If I wanted 2 cards inside would they both need to be the ATI's or Nvidia's?
Thanks

Hi I would maybe get a Apple Upgrade Kit the GT 120 is 512MB's & dose not use all 16 lanes as it like to make you think & will work on 2006 Mac Pro's at $149.00 I would say if you just want more displays get two & eBay your old cards. Please know if you game you will want more power but if only for more displays this 1 slot card is great.
NVIDIA GeForce GT 120 Graphics Upgrade Kit for Mac Pro (early 2009)
View all Questions
It as well as the much better 4870 both work with the Mac Pro 1,1 & 2,1
NVIDIA GeForce GT 120 Graphics Upgrade Kit for Mac Pro (early 2009)
The NVIDIA GeForce GT 120 includes 512MB of GDDR3 memory, uses the PCI Express 2.0 interface, and includes one Mini DisplayPort and one dual-link DVI port.
Learn more Questions & Answers
2 Questions + 2 Answers
Based on 11 reviews
Write a review
$149.00
Ships: Within 24hrs
Free Shipping
Overview
The NVIDIA GeForce GT 120 with 512 MB of GDDR3 memory delivers excellent all-around performance whether your playing games or dealing with creative and scientific applications. With up to four NVIDIA GeForce GT 120 graphics cards installed, a Mac Pro can support up to eight displays simultaneously.
NVIDIA GeForce GT 120 includes two video ports: one Mini DisplayPort and one dual-link DVI port. This allows you to connect both the 24-inch Apple LED Cinema Display or another Mini DisplayPort-based display, and a DVI-based display such as the 30-inch Apple Cinema HD Display. Display adapters are available to connect VGA displays.
Good Luck man
Thomas

Radeon X1900 XT replacements?

Similar Messages

Maybe you are looking for