Radial filter not displaying th ecircle or elipse

I have been using the radial filter with no problems.
Now it will not display the circle or eplipse. it seems to be working as when I try to do the circle and it will not show but if I change the exposure or any of the setting it does do that.
As said with out the guideline of the ciecle or elipse and not showing the marker on the image is no good .
Have I accidently changed something or a setting to cause this .
thank you form any help.
Dicik

You may have inadvertently pressed the H key to hide the pin and ring. If your Toolbar is showing (T) you can also select the behaviour from the lower left corner.

Similar Messages

  • Radial Filter not changing to outside in Photoshop CC Camera Raw

    Hello folks,
    I realise that I may be missing the very obvious, so apologies in advance - this has been driving me nuts for a few weeks now and I can't find anything in forums to help me out...
    Basically, in Camera Raw filter within Photoshop CC, when I try to add a Radial Filter, I can only get the filter to apply on the inside - clicking the option buttons at the bottom of the menu, the adjustments never move from inside to outside, I can't get any adjustments to apply outside the radial, not even when I select New at the top of the menu either. What am I missing? Hopefully someone will be able to offer a solution!
    Thanks in advance,
    David

    ACR 8.7.1 is current can you post some screen capture where that shows your problem. Ther radio button should cause the current active  Radial filter to change.   Like this one I show that changes exposure of the area. "Must be Active" with overlay checked the boundary outline should be visible.

  • Filter not displaying all values

    When I attempt to filter a product code. the drop down list (under heading Expression) displays about 100 codes when in reality there are about 2000 values.
    I have changed the Maximum Rows per Page under Search Bar to 2000, but this still does not display all the codes.
    Is there a setting I am missing?

    I think that your description of the problem doesn't help a lot. Are you using interactive reports?
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • SharePoint 2010 Datasheet View - Filter not displaying correctly on list

    Hi,
    I have a list where I want to filter in datasheet view.  The filter will work correctly when I first open Internet Explorer:
    However, if I open the list again and go into datasheet view I get the following filter which does not display correctly:
    Has anyone else come across this?
    Mark

    Hi Mark,
    please have a try on this kb too:
    http://support.microsoft.com/kb/2760758/en-us
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Content iView With out filter not displaying folder content

    Hi!
    I´m creating a ContentiView with out filter and pointing it to a document Folder, when the user access the iView this message appears:
    http://oneworld.neoris.net:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fDemaBanorte!2fDemoBanorteRol!2fHome!2fBanortePage!2fContentiViewWOFilter/documents/BanorteDocuments
    The folder you are looking for has no displayable content.
    You can try one of the following:
    Access the folder using the Navigation user interface.
    Access the folder as a Web folder. Your operating system and browser dictate whether or not this will work.
    And when I click on "Access the folder using the Navigation user interface." then I can see the folder structure and its contents really nice.
    is there a way to configure the iView that allways display the content this way with out the user clicking on the "Access the folder using the Navigation user interface." option. ?
    Thanx in advanced!
    Gerardo J

    Hi,
    I resolved the problem using a KM Navigation iView, this iView has the functionality I was looking for and this displays the folders and then the content of the folders if we click on the folder. with the edit etc etc functionality.
    kind Regards,
    Gerardo J

  • RAW filter not displaying correctly

    Hi guys,
    i have recently started using Photoshop CC and love the idea of using the Camera RAW engine as a filter i can go back and revisit if needs be, the problem i have is that when i convert my 32bit image to a smart object and then use the RAW filter any alterations i make in ACR don't seem to transfer properly over to photoshop once i ok my alterations. The overall look is usually way to bright and doesnt seem to hold the quality of all the tones. Is this a 32 bit issue as i don't tend to get it so much with 16 bit files.   I am running PS CC 64bit.
    Any help would be greatfully accepted, it's driving me nuts.
    thanks
    Lee

    There is also a Camera RAW forum you may want to ask in.   Perhaps camera raw does not support 32 bit depth Color.  I do not do HDR stuff so I have no knowledge about Adobe 32 bit color depth support.
    https://blogs.adobe.com/richardcurtis/?p=1044http://
    In there I see this also, turn on the “Complete Toning in Adobe Camera Raw” (the histogram is greyed out once this box is checked).
    The “Complete Toning in Adobe Camera Raw” will open the combined image into Camera Raw, enabling non destructive 32bit processing.

  • In lightroom 5.3, I do not see the radial filter ellipse.

    Yesterday I purchased Lightroom 5.3 and tried the radial filter.  It seemed to work fine.
    Today I can not longer see the filter's ellipse.  What am I doing wrong?

    Press "H".
    When using the Radial Filter, there are various options using the "Show Edit Pins" menu at the bottom of the image. Pressing the "H" keys toggles between "Never" (likely what you have) and "Auto" (which shows the pins and the elipse when the mouse is over the images, but hides them when you move the mouse off the image). There are other options as well, experiment with them to get to your preferred display state.
    These same display options are also in the Gradient tool and the Adjustment Brush.

  • Few values of report column do not display in report while applying filter

    Post Author: anuragg11
    CA Forum: WebIntelligence Reporting
    There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.

    Hello,
    I think i know what your problem is.
    Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
    One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
    1. click on a column to add it in the criteria (it doesnt matter which one)
    2. go into the edit formula of that column
    3. delete the formula and in its place write 'Dummy Column 1'
    Do the same for the second request by adding a "Dummy Column 2'
    Now the Pivot Table should also show up correctly
    Let me know if it goes well or if you have any further questions,
    Kostis

  • Radial filter does not show in Photoshop CS5

    Hi,
    I am using the trial of LR5. I have made some adjustments with the Radial Filter. When "opening as a smart object in CS5," the radial filter adjustments do NOT show up. Crop does, basic exposure adjustments, but no radial filter.
    Anyone know why? Would it show up in CS6? I do not want to go to CC.
    Thanks much for your help.
    MF

    Just so you understand, LR5 can pass the Radial data to ACR 8.1 in CS6, but you won't be able to alter the radial filters (or any of the LR5 only features) unless you go to ACR 8.1 in Photoshop CC. So, a SO in ACR 8.1 in CS6 will still be limited in terms of what you can and can't do in CS6.

  • Can I filter by value which is not displayed in grid columns?

    In excel it is possible to filter by value of measure which is not displayed in the report.
    How can I possibly do this in Performance Point Grid? (in filter by value there I only see the measures in columns).
    Please advise
    Namnami

    I found it is possible to filter by value by changing the MDX in the query tab.
    (I filtered by certain existing value in design, then switched to Query and changed to the measure which is not displayed). I shows up correctly.
    The problem is, once I change the query, I get an error when tring to connect a filter on a grid column:
    "consumer parameter no-longer exists in the consumer webpart"
    The grid looks "frozen"- cannot drill up / down etc.
    How can I filter by value which is not displayed without loosing the ability to attach a filter to the grid?
    Namnami

  • Project 2010 Filter Selector (+/-) Not Displaying

    Hello all.
    I'm using Project 2010 and am having a problem with the "filter selector" - the "+" or "-" symbols which allow you to roll-up or expand sections.
    I first noticed this with Summary Tasks in my project file not displaying the small boxed in "+" or "-" symbols.  I've hunted around for a setting option that could affect this but haven't come up with one.
    Now I've noticed the same thing when using the "Group by:" function and choosing "Critical."  The tasks do group by Non-Critical and Critical - but there's no "+" or "-" symbols Critical: No or Critical:
    Yes lines and thus I can not collapse them or expand them.
    Complicating things is when I create a project schedule of my own in order to test things and those "+" or "-" symbols appear and function as expected.  The project file in which they are lacking seems to lack them on other
    computers than mine so it doesn't seem to be a particular hardware issue.
    Is there some setting in Proj 2010 that I'm missing?
    Is this an indication that the Project file itself is corrupted?
    While a somewhat low level problem, this is reducing the functionality within that file and if the file itself is corrupted them that could lead to other problems.

    Madoc,
    There is a setting, (now hidden in Project 2010), that turns on and off the outline symbols and that setting is saved with the file. There are various ways to correct the issue but let me show you where to find the setting so the next time, if there is a
    next time, you will be prepared.
    1. Right click in the ribbon area to bring up the "customize the ribbon" item
    2. On the right side of the Project Options window, hit "New Tab" and then "New
    3. Under that new tab you will see a "New Group". Select it
    4. On the left side chose "Commands not in the ribbon"
    5. Find the Outline Symbols and select it
    6. Hit "Add" to put that into your new group under your new tab
    7. Hit "OK"
    Now select your new tab on the ribbon and you should see the Outline Symbols option unchecked (for this particular file). Check it and close.
    You might want to peruse the list of other commands not in the ribbon that you've been racking your brain to find and add those to your new tab. I did.
    If the Outline Symbols option is already checked for this file then the file is probably corrupt. In that case save to XML and re-open in Project. Note, you will lose any custom formatting.
    If this answers your question, please mark it as the answer.
    Hope this helps.
    John

  • SVG objects with the feSpecularLighting filter effect do not display

    When I open a Scalable Vector Graphics (.svg) file in Firefox, any objects having filters that contain the <feSpecularLighting> filter primitive, do not display at all and in rare cases, even causes Firefox to crash.
    For example:
    *http://upload.wikimedia.org/wikipedia/commons/e/ee/Video_game_health_bar.svg
    It should render like this:
    *http://upload.wikimedia.org/wikipedia/commons/thumb/e/ee/Video_game_health_bar.svg/3000px-Video_game_health_bar.svg.png

    In order to get the SVG file to render like the PNG, you need to edit kernelUnitLength from 0.01 to approximately 1.0 (or delete it). Not sure whether something might have changed in how Firefox handles this attribute to cause such a drastic difference.
    I should test in a clean profile to see whether I get the same result...
    ''Edit: Same result in a clean profile, i.e., no extensions or settings changes from factory default.''

  • Why does my version of Lightroom 5 not have the moire tool under the Radial Filter?

    I've been seeing screenshots all over the place of Lightroom 5 that displays a number of tools under the Radial Filter, including one for moire. That's a big part of why I decided to join Creative Cloud, but in my version of Lightroom 5, there is no such tool. Anyone else experiencing that same problem, or can anyone provide any input on why this might be? Thanks.

    The only sliders I see under the Radial Filter are:
    Exposure
    Brightness
    Contrast
    Saturation
    Clarity
    Sharpness
    Color
    Feather
    and the Invert Mask checkbox. There is only one black triangle, which is pointed down -- obviously if I click on it, it collapses the above slider group.

  • Radial filter tool in Camera Raw 8.3 does not show

    If have updated Camera Raw and do not see the Radial Filter tool in the toolbar next to the Graduated filter tool. Does anybody know what is wrong here?

    Are you using CS6?  The Radial Filter only comes with CC.  You will continue to be able to add ACR updates to CS6, but only with additional camera support, and not the added features that come with CC.
    If you wanted to use the Radial Filter to produce vignette, check out the Post Crop vignetting in the FX tab.  It produces a wonderfully smooth gradient with lots of control.

  • Radial Filter effect not exported to Photoshop, why?

    Suddenly while working on may images in LR5, doing all the usual with Development module I've realised that Radial filter effect is not being exported to CS5; all others ark: healing, spotting, grad filter, and brushes are ok. is it me or there is something wrong with the system?

    In which case, have a read of this:
    http://www.lightroomforums.net/showthread.php?19637-Lightroom-edits-not-appearing-when-usi ng-quot-Edit-in-Photoshop-quot

Maybe you are looking for