Radiation levels of the new router

Does the new 802.11 ac standard and the beam forming feature have to do anything the radiation levels of the router ? I mean if the signals are being focused a particular devices rather than disseminating the signals in all the directions,it should reduce the harmful effects of radiation !
Thanks

IamArunNirmal wrote:
Does the new 802.11 ac standard and the beam forming feature have to do anything the radiation levels of the router ?
No. Beamforming in the new 802.11ac standard uses a technique in which preference is given to the pattern of radiated energy from the connected device. The energy is not concentrated and aimed or "focused" at any specific cardinal direction.
Cell phones and even cordless phones radiate much more electromagnetic energy than any wireless access point.

Similar Messages

Please may tell me the SAR level in the new Iphone 6? thanks in advance, Mebahele

please may tell me the SAR level in the new Iphone 6?
thanks in advance,
Mebahele

1.18 at the head, link below
http://www.emfacts.com/2014/09/iphone-6-sar-radiation-levels-and-separation-dist ance/
Cheers!

I have an wireless printer and a new wifi router. I have set the printer and iPhone / iPad correctly to the new router but when i try to print it won't recognise the air printer. Help. All was working fine on my old router

I Have a new wifi router and have set up my iPad / iPhone and wireless printer correctly to the new router but I can't print from the iPad and iPhone. It keeps saying ' no AirPrint printer found'. Help please!

Start with the most basic thing that you can try. Unplug the router from power for about 30 seconds, and restart the printer and the iPad and plug the router back into power.

Can not connect my wireless printer to the new router.

Can not connect my wireless printer to the new router.

Can you please provide details:
1. The make and model of printer
2. Make and Model of Wireless Router
3. Is your printer connection wireless to router or a cable to PC
4. What have you done or attempted to do to establish a connection?
5. Any further info to assist

Changed routers now PC with XP will not accesss the new router

My mac works ok with the new A1408 5th generation router, my Iphone works on wifi link, but my pc sees the wifi link( with 5 bars) but will not access the router, its saya i am out of range but iam next to the router. The PC worked with my old belkin router but not the apple router . any suggestions?
Do I need to download airport utility 5.3.3 for my pc to recoginize tn apple router for a wifi link ?

Keychain is no longer able to update itself when I upgrade an application...
http://unsanity.org/archives/2007_01.php
Mail passwords not holding...
If Terminal doesn't scare you, you might try this line in Terminal...
sudo mv /var/db/CodeEquivalenceDatabase /var/db/CodeEquivalenceDatabase.old
Carefully type your admin password when asked & hit enter, as it won't be echoed, then restart the Mac.
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server.
So since WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.
Is it POP or IMAP?

Photosmart plus b209a-m, doesn't connect to the new router

I recently bought a Netgear N150 router and trying to connect to my Photosmart plus B209 a-m wirelessly. It keepsaying that no network available (Network SSID not detected). I use WPA2-PSK (AES) security setting for the network, don't know if this is an issue. I have connected couple of computers and smartphones to my network and work fine.
The printer worked fine with my old router (Belkin G series) which is not working anymore.
Please help.

Page 7 of the manual only references WPA and not WPA2. I did search the manual for mention of WPA2 and did not find any. This indicates it does not support WPA2, so this could be an issue. However, this typically does not prevent the printer from seeing the network but only connecting to it.
While the wireless radio is more than likely functioning, it may be best to confirm it is working since it is not seeing the SSID. Go to setup>network> wireless network test.
Does it show anything as failed? If so, what items are marked?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

IPhone 4 - Love the new design, BUT worried about the antenna.

I want an iPhone4, it looks great, and has everything I would want. What worries me is the fact that the antenna is on the outside of the phone, all around the edges. I remember that most radiation from cell phones comes from the antenna, where the signal is received. Does this mean the radiation levels on the new iPhone will be much higher since your hand is fully in contact with stainless steel band?
Andy
Message was edited by: Andy Katz

I don't think Apple will commit such a grave error in phone design to have a device with the antenna touching someone's ear.
I've looked at the pictures located here http://www.apple.com/iphone/gallery/
Looking at the 2'nd pic, in the lower exterior metal band there is a space that separates the lower metal band from the top metal band. The same size and form corresponds with the location of previous Iphone's antenna allocated space.
This can be double checked by going to FCC's test https://gullfoss2.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits& RequestTimeout=500&calledFromFrame=N&applicationid=573413&fccid=%27BCG-E2380A%27 and verifying the 11a SAR report file.
At page 27, on the GSM 1900Mhz, having the device parallel and touching the face, the value is 0.73 SAR. Using it in a tilted 15 degrees position (ear touch, lower part about 2 inches away from face), the SAR is 0.30. If the antenna were to be continuous all the way around, the SAR values would not change since the top part is in contact with the ear at all times in both tests.
I hope someone can confirm how the antenna is actually used in the new iPhone, I'm interested too since to me at least, having an antenna emitting so close to the ear means No Buy, antenna away from top = possible buy.

We installed a new router and changed the name of the router. Now my HP C4500 printer won't print.

Our cable company installed a new wireless router and changed the name of the router. Now my HP C4500 printer won't print from my laptop.
I can't find any ot the Set Up stuff I used initially.
Is there any way to get my printer to work again...wirelessly?

Get the latest software for your printer from the "Support & Drivers" link at the top of this page. When you start the installation it will ask what kind of installation you would like. Choose "Wireless" or "Network" then click "Next".
Eventually it will ask you to plug in a USB cable to the printer temporarily to communicate the new router's info to the printer. Make sure to not plug in the USB until it asks.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

New router does not see the Internet

I replaced my MI424WR Rev. D with a new MI424WR Rev. I. The old version D work very well put I wanted the WPA2 sercuity of the the new router. I follow the instructions that came with the router and hooked up the router as instructed. Lights on the router started to light up and turn green except on: The Intnet light. After waiting ~15 minutes, I went through the usual procedure of checking the cable, unplug the router and replugging it in and resetting the router. I even reset the ONT. I was wondering is there something else I can do before having to clean out the closet and call in a tech to see if he or she can fix it.
Solved!
Go to Solution.

You need to release the IP address from the old router. You can also plug in the new router and call Verizon and have them do it.

We have had to change to a new router but the Macbook Pro still reverts to the old router. How can this new one be made the default?

We have had to change to a new router but the Macbook Pro still reverts to the old one. How can we lose this and make the new router the default?

Go to "Network" under system preferences and choose "advanced"
On the Wi-Fi tab you can sort the sequence of the preferred connections.
Then just move your new router to the top of the list.

Control panel screen does not respond so I cannot set up new router

The printer recognises the new router and I can select it on the touch screen. But I cannot get any further. Several screen prompts do not work on touch screen: I cannot enter new router password in set up wizard or press start before pressing WPSbutton on router.

I apologize if I overlooked your first post. Base on your first pot, you were saying that you can get online wired, right? Here are the things you can do: 1. In accessing the setup page of the router, make sure the firewall on the computer is off. Turn off everything. Be it an anti-virus or a firewall. 2. Reset the router for 30 seconds. Make sure the power light of the router is blinking when you press the reset button. That is the indicator that the reset is properly press. Then power cycle the router and the modem. 3. After that, check if you can ping the IP address of the router: 192.168.1.1 (default). If so, try to access the page. Username: blank Password:admin. 4. You should be able to access the page, if not (incomplete page), adjust the security level of the browser or you can use another browser to isolate the problem. If the problem is still there, try to access the router using a different computer to isolate further. 5. Considering you are able to access the setup page of the router with no problem now, go to the status tab and check your internet IP. In doing that, we will be able to determined if the router is acting just a passthru or the other way around. 6. Then go to the wireless tab, configure the SSID (change the default one, change the channel to 11 then save. 7. Go to wireless security sub tab and enable the wireless security (WPA). Save all the settings and try to connect your wireless computer. If you are using a built-in wireless card, make sure all updates are installed on the PC, drivers and WPA patches. Try to connect using WZC... Hope it works!

Home Sharing not working between wireless PC's / devices and ethernet wired PC's on the same router.

Home Sharing is not working between wireless PC's / devices and ethernet wired PC's on the same router. I installed a new Verizon FIOS ActionTec MI424WR GigE wireless / ethernet router, replacing the original FIOS router. With the old router Home Sharing worked fine across and among all iOS and Windows wired and wireless devices. With the new router Home Sharing works between and among the Wired PC's but not between the wired PC's and the Wireless connected PC's or iOS devices. Home Sharing also works between and among the wireless connected PC's and iOS decices but not between them and the wired PC's.
Only the router was changed. No changes were made to any of the devices except all were updated with the latest version of iTunes 10.7.0.21 and the iSO devices were updated to iOS vrsion 6.01. Three PC's are wired and all are running Windows 7. There also is a Windows Home Server connected to the router by ethernet port. It does not run iTunes but does provide WebDAV services to my iOS devices. This works fine. Two PC's are wireless, one running Windows 7 and one running Windows 8. All of the PC's are connected to the same (new) router via it's ethernet ports and it's wireless access point. Two of the wired PC's are connected via a high-speed ethernet hup that is connected to the router (Home Sharing works fine between the two PC's on the hub and the PC on the router). All wired and wireless devices on the router are visible and members of the router's Home/Office virtual network.
All of the PC's are visible in the Windows network and all shared files are accessable from all PC's, both wired and wireless.
Obviously the router seems to be the issue, something between the ethernet and the wireless access point components. I checked the settings and found nothing that would prevent Home Sharing between the wired and wireless devices. There is no setting that isolates the wireless network. I have done the following:
Read the router user manual and checked all the settings
Rebooted the router and tested.
Turned off the router's firewall and tested.
Home Sharing is turned on all the devices and all use the same Apple ID.
Restarted iTunes and tested.
Verified iTunes is "Allowed" in each PC's firewall.
Again, I can Home Share between the two wireless PC's but not between either of the wireless PC's and any of the wired PC's. I can Home Share between my iPads and iPhones and either of the two wireless PC's but not with any of the wired PC's. I can Home Share between any of the wired PC's but not between any wired PC and a wireless PC or iOS device.
I hope someone may have had a similar problem and has a fix suggestion. I'm stumped! I have a;so contacked ActionTec and awaiting an answer.

Solution from ActionTec is:
Log into your router.
Click the Advanced icon
Cclick Yes
Click on the IGMP Proxy
Select Disable
Click Apply

I bought a new router and now my mac can no longer find my air port express

I recently installed a new Netgear N600 router. The internet and wireless are working. I had previously purchased an Airport Express for use simply as Air Tunes and used it with our old router with no problems. However, since we installed the new router the Air Port utility cannot find the Airport Express. I have reset the settings on the Airport by pushing the little button.
I have tried connecting using an ethernet and Airport Utility still cannot find the express.
Any suggestions or help would be greatly appreciated. Thanks!

I would suggest that you start by performing a "factory default" reset on the AirPort Express Base Station (AX). Once completed, you should be able to access the AX via the AirPort Utility. Note: Be sure to first connect to the AX's wireless network BEFORE accessing it with the utility.

LaserJet Pro CP1525nw cannot connect to new router (Home Hub 2000)

In December, we replaced everything EXCEPT our LaserJet Pro CP1525nw colour printer - new laptop (Dell Inspirion 15), new operating system (Windows 8.1 - 64 bit), new internet provider (Bell) and new wireless router (Home Hub 2000).
Immediately, we were unable to connect to the router. We tried all of the suggestions, including connecting the printer directly to the router - which worked, until we disconnected it and then they could not communicate again.
At the time, the only solution we could find was to connect our printer and laptop via USB cable and print that way - no more wireless printing, so unable to print from phones and iPad, but at least we could print from the laptop.
In the past month, we have become unable to use many of the features on our printer - when we try to select print options, we get the message "HPMSN103.dll has stopped working." So, we can still print, but cannot select options.
We have tried using the CD that came with the printer, and it gets to a certain point and then a fatal error occurs. We have tried downloading the "full solution" printer install program from the HP website, and the same thing happens. We have tried skipping that and just choosing the appropriate printer driver in Windows: if we only use that driver, we get a printer that shows up, but we cannot print if we select it (interestingly, though, we can actually access the printer options!); if we say we have the disc, then we get two printers showing up - we can select print options on the one that will not allow us to print, but not on the one that actually prints. If we try removing one of the printers, they both uninstall and we're back to square one.
So, we WANT to be able to get back to printing wirelessly - after all, we paid (handsomely) for a wireless printer! And we still cannot get our printer and the router to recognize each other. Can somebody help? We don't want to have to buy another printer.
Thanks!

Hi @Capers2 ,
I see that you are experiencing issues setting up the printer on the new router. I will certainly do my best to help you.
Thank you for providing that detailed information.
If the network name has any spaces or special characters, the printer may not recognize it.
The printer is only capable of sending/receiving in the 2.4 ghz band.
If it is set to 5 GHZ network you may need to change to 2.4 ghz. (rename the 5 ghz or shut it off)
The WPA key setting needs to be on AES to work correctly not TKIP.
Multi casting needs to be turned on.
Firewall on router has to have open ports for printer.
If you have Mac Filtering you need to give printer hardware address from Configuration page.
You might need to contact your router company for further assistance to check those settings.
I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page.
The easiest way to setup the printer back on the wireless network is through a Ethernet connection and then switch over to wireless.
Disconnect the USB cable.
Remove any printer software by following these steps:
Go into Devices and Printers , click file then Server Properties, click on the Drivers tab at the top of print Server Properties window. Choose the printer you want to uninstall and click remove. Choose remove driver and package. Any that say Universal PCL 5 or Universal PCL 6 also remove and the Laserjet CP1525nw.
The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click yes to say that you are sure you want to do this. (if the printer isn't listed that is OK)
Right click and delete any entries for the Laserjet in the Devices and Printers Window.
Run the uninstall from the CD.
Press the Windows key and the X key together. and select File Explorer, right click the CD for the
printer and left click open in new window.
Connect the printer to the router with a Ethernet cable.
Wait about 1 minute and the printer should have a valid IP address.
Print the configuration page to get the printer's IP address to configure the Wireless.
Type the IP address in Internet explorer's address bar which should open the printer's embedded web services page.
Setup the wireless through here now.
Click on the networking tab, wireless on the left, fill out the network information and apply the settings.
After the confirmation, then disconnect the Ethernet cable.
Now you should have a blue wireless light on the printer in about 1 minute.
Perform a clean boot on the computer and turn off the Antivirus Software. How to perform a clean boot in Windows.
Run the installation again.
If you are prompted to connect the USB cable during the installation, Then immediately after connecting the USB cable, follow the steps in this document to update the drivers so it doesn't error out. A Fatal Error Displays During Software Installation. Then the installation should continue.
Test the printer.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I tell the printer the new SSID and wireless key?

Hi,
I have a HP Laserjet Pro Color MFP M175nw and it works beautifully. However, today I replaced my wireless router and thus have a new SSID and key. I cannot figure out how to tell the printer the new router info - it must be very simple. Please help!!!

Hi @wirelessfun,
I understand that you need the printer setup on the new router. I can help you with this.
Restore the printer's network defaults first.
Touch the Setup button. (wrench)
Select Network Setup Menu.
Then select Restore Defaults.
Print out a configuration report to make sure the IP address is 0.0.0.0.
Printing a Configuration Report.
Select Method one under the operating system.
Follow these steps to setup the wireless:
On the printer touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
On the computer, in the bottom right corner click on the wireless icon and select the printer from the list to connect to. Then open Internet Explorer and type in the IP address (192.168.223.1) for the printer in the address bar.
This will load the embedded web server for the printer.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Click on the wireless icon and connect back to your network name.
Print out a configuration report to make sure the IP address is valid. (192... or 10....)
Run the installation again or run the add printer wizard from the devices and printers.
Test the printer.
Let me know how this goes for you!
Have a great day.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Radiation levels of the new router

Similar Messages

Maybe you are looking for