Radio button in two different blocks in the selection screen
Hi folks,
In my selection screen i have two selection blocks. First block to create a new document no, second block to display the list of the created document numbers.User has to go any one of that..can i keep first radio button in the first selection block and the second radio button in the second block...I have already tried..but its not allowing..is this possible..if so please suggest me how...
Thanks,
Shyam.
Hi,
Hope the following logic will help u.
selection-screen begin of block input with frame title text-000.
parameters :desktop radiobutton group rg_f user-command rg_f,
in_file type ibipparms-path modif id ps,
menu radiobutton group rg_f,
sys_file type ibipparms-path modif id as default '/sapia/iface/in/comm/sapfin/' .
selection-screen end of block input.
AT SELECTION-SCREEN. *
at selection-screen.
case sy-ucomm.
when 'RG_F' or 'RG_B'.
perform f_toggle_finputs.
when 'ONLI'.
if ( desktop = c_x and in_file is initial ) or ( menu = c_x and sys_file is initial ).
message e100.
endif.
endcase.
FORM : f_toggle_finputs
loop at screen.
if screen-group1 = 'PS'.
if desktop = c_x.
screen-input = 1.
sys_file = c_server_path.
else.
screen-input = 0.
endif.
endif.
if screen-group1 = 'AS'.
if menu = c_x.
screen-input = 1.
clear: in_file.
else.
screen-input = 0.
endif.
endif.
modify screen.
endloop.
endform. "f_toggle_finputs
Thanks.
Similar Messages
-
Add a radio button to each row on output (not selection-screen)
its a normal interacitve report...
we need to add a radio button to each row on output (not selection-screen) and when user selects the radio button of a particular row and clicks on the user defined menu 'Execute' the report has to fetch the records from a table corresponding to the selected row on the second list.
all this has to be done in normal interactive list.
please let me know your suggetions as soon as possible.
thanks,
usha.Hi , try this
TABLES: spfli.
TYPE-POOLS:slis.
PARAMETERS: p_col TYPE i ,
p_row TYPE i,
p_color(4) TYPE c .
DATA: t_fieldcat TYPE slis_t_fieldcat_alv,
fs_fieldcat LIKE LINE OF t_fieldcat,
fs_layout TYPE slis_layout_alv ,
w_color(4) ,
w_row TYPE i,
w_fieldname(20),
w_prog TYPE sy-repid.
TYPES : BEGIN OF ty_spfli ,
color(4),
checkbox ,
cell TYPE slis_t_specialcol_alv,
carrid TYPE spfli-carrid,
connid TYPE spfli-connid,
cityfrom TYPE spfli-cityfrom,
cityto TYPE spfli-cityto,
distance TYPE spfli-distance,
END OF ty_spfli.
DATA : wa_spfli TYPE ty_spfli ,
t_spfli TYPE TABLE OF ty_spfli.
DATA: fs_cell LIKE LINE OF wa_spfli-cell.
SELECT carrid connid cityfrom cityto distance
FROM spfli
INTO CORRESPONDING FIELDS OF TABLE t_spfli.
w_color = p_color.
fs_fieldcat-fieldname = 'CARRID'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-col_pos = 1.
fs_fieldcat-key = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat .
fs_fieldcat-fieldname = 'CONNID'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-col_pos = 2.
fs_fieldcat-key = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat .
fs_fieldcat-fieldname = 'DISTANCE'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-col_pos = 3.
fs_fieldcat-key = ' '.
fs_fieldcat-edit = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
fs_fieldcat-fieldname = 'CITYFROM'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-col_pos = 4.
fs_fieldcat-key = ' '.
APPEND fs_fieldcat TO t_fieldcat.
LOOP AT t_fieldcat INTO fs_fieldcat.
IF fs_fieldcat-col_pos EQ p_col.
fs_fieldcat-emphasize = p_color.
w_fieldname = fs_fieldcat-fieldname.
IF p_row IS INITIAL AND p_col GT 0.
MODIFY t_fieldcat FROM fs_fieldcat TRANSPORTING emphasize.
ENDIF.
ENDIF.
ENDLOOP.
fs_layout-info_fieldname = 'COLOR'.
fs_layout-box_fieldname = 'CHECKBOX'.
fs_layout-coltab_fieldname = 'CELL'.
fs_layout-f2code = '&ETA'.
w_prog = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = w_prog
is_layout = fs_layout
it_fieldcat = t_fieldcat
TABLES
t_outtab = t_spfli
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Aby -
Radio button in three column in a single selection-screen
Hi,
I am trying to create radio buttons with three column within a single selection-screen.
I.e.
Column 1:
radio1
Column2:
radio2
radio3
column3:
radio4
radio5
radio6
Also I wish to give three names(as headers) to each columns.Is is possible?If yes how?Hi,
write as :
SELECTION-SCREEN COMMENT /1(50) text-001.
PARAMETERS: r1 RADIOBUTTON GROUP rad1.
SELECTION-SCREEN COMMENT /1(30) text-002.
PARAMETERS: r2 RADIOBUTTON GROUP rad1,
r3 RADIOBUTTON GROUP rad1.
SELECTION-SCREEN COMMENT /1(30) text-003.
PARAMETERS: r4 RADIOBUTTON GROUP rad1,
r5 RADIOBUTTON GROUP rad1,
r6 RADIOBUTTON GROUP rad1.
Regards,
Srini. -
How to disable the complete block on the selection screen
Hi,
I want to disable the complete block of selection screen when user checks on box...how shall i go about this?
I tried using block name as screen name and then modify screen but of no use..
Any Pointers...
Regards
GunjanSELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS: box as checkbox USER-COMMAND ch.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: path(150) MODIF ID id1.
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
IF box = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ID1' .
screen-active = '1'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-group1 = 'ID1' .
screen-active = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
Hope it will work
Regards
Sugumar G -
Push button in the selection screen
Hi folks,
I need to display a push button the selection screen.its not on the application tool bar..but in one of the selection block in the selection screen..could anybody guide how to do this...
Thanks in advance,
shyam.
Edited by: shyam prasad on Jan 15, 2009 7:34 AMHi Shyam,
Try the following code..
TABLES sscrfields.
TYPE-POOLS icon.
*SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE title,
PUSHBUTTON 2(10) but1 USER-COMMAND cli1,
PUSHBUTTON 28(30) but2 USER-COMMAND cli2
VISIBLE LENGTH 10.
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE sscrfields.
WHEN 'CLI1'.
WHEN 'CLI2'.
ENDCASE.
START-OF-SELECTION.
title = 'Push button'.
but1 = 'Button 1'.
CALL FUNCTION 'ICON_CREATE'
EXPORTING
name = icon_information
text = 'Button 2'
info = 'My Quickinfo'
IMPORTING
RESULT = but2
EXCEPTIONS
OTHERS = 0.
Hope it will be useful..
Regards,
Lakshman.
Edited by: Lakshman N on Jan 15, 2009 7:39 AM -
I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.
There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP -
Report should executed based on the radio buttons on the selection screen
Hi everyone,
Greets....................
My scenario is I have 2 selection screen blocks on same screen..
One selection screen block contains input parameters as follows
Company Code - S_BUKRS
Business Area - S_GSBER
Customer Code - S_KUNNR
Fiscal Area - S_GJAHR
GL Account - S_HKONT
Posting Date -S_ZFBDT
Ledger Type -P_RLDNR
Open Item Key Date - P_ZFBDT
Another selection screen block contains 2 radio buttons with the option as follows
Collection Plan
*Credit days summary.
If i click Collection plan the report output should come based on the input parameters in first selection-screen block.
If i click Credit days summary the report output should come based on the input parameters in first selection-screen block.
Pls send me the sample code for this.
Thanks in Advance
Regards
Raj kumarSee the below folling example : it will have radio buttons and depends on radio button it will show output.
REPORT ZPPR_BOM_INFOL_REPORT no standard page heading
line-size 160
line-count 60.
======================================================================
Program Name : ZPPR_BOM_INFOL_REPORT
Description : This Program would be used for BOM List for a material*
and the component's where used list *
Author : Seshu *
Date : 07/24/2006 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
|----
|----
|----
*12/04/06 | Seshu | DEVK921821 | Removed new page for each material *
======================================================================
Table definition *
TABLES: mast,
stko,
stpo,
T418,
makt.
TYPE - POOLS
TYPE-POOLS: slis.
Constants
constants : c_tcode(4) type c value 'CS03',
gc_formname_top_of_page TYPE slis_formname
VALUE 'TOP_OF_PAGE'.
Variables
data : v_maktx like makt-maktx,
wa_stko like stko.
DATA:
Objekttyp 'Material'
otyp_mat(1) TYPE c VALUE '1',
ootyp_mat(1) TYPE c VALUE 'M',
Objekttyp 'kein Objekt'
otyp_noo(1) TYPE c VALUE '2',
Objekttyp 'Dokument'
otyp_doc(1) TYPE c VALUE '3',
Objekttyp 'Klasse'
otyp_kla(1) TYPE c VALUE '4',
Objekttyp 'Intramaterial'
otyp_ntm(1) TYPE c VALUE '5'.
maximal anzeigbare Menge
data: max_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999',
ueberl_kz(1) TYPE c VALUE '*',
min_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999-',
b_flag(1) TYPE c VALUE 'X',
ecfld(250) TYPE c,
v_flag type c.
ALV Variables
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gs_layout TYPE slis_layout_alv,
gs_keyinfo TYPE slis_keyinfo_alv,
gt_sp_group TYPE slis_t_sp_group_alv,
gt_events TYPE slis_t_event.
DATA: g_repid LIKE sy-repid.
DATA: gt_list_top_of_page TYPE slis_t_listheader,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
g_save(1) TYPE c,
gx_variant LIKE disvariant,
g_variant LIKE disvariant,
g_default(1) TYPE c,
g_exit(1) TYPE c.
Includes *
INCLUDE .
Internal Table Declaration *
DATA: t_mast LIKE STANDARD TABLE OF mast WITH HEADER LINE.
*DATA: t_makt LIKE STANDARD TABLE OF makt WITH HEADER LINE.
BOM Function module Related
DATA: t_matcat LIKE cscmat OCCURS 0 WITH HEADER LINE.
Internal Table for Level by Level Function module
DATA: t_stb LIKE stpox OCCURS 0 WITH HEADER LINE.
Get the Relevant data from FM
DATA: BEGIN OF hd_tab OCCURS 0,
stufe LIKE stpox-stufe,
vwegx LIKE stpox-vwegx,
END OF hd_tab.
Final Output
DATA: BEGIN OF alv_stb OCCURS 0.
INCLUDE STRUCTURE stpox_alv.
DATA: info(3) TYPE c,
END OF alv_stb.
DATA: BEGIN OF stb_orig.
INCLUDE STRUCTURE stpox.
DATA: END OF stb_orig.
DATA: BEGIN OF stb_add.
INCLUDE STRUCTURE stpol_add.
DATA: END OF stb_add.
Internal Table for STPO
*-- BOM Line item
TYPES: BEGIN OF ty_stpo,
stlty TYPE stpo-stlty,
stlnr TYPE stpo-stlnr,
stlkn TYPE stpo-stlkn,
stpoz TYPE stpo-stpoz,
idnrk TYPE stpo-idnrk,
meins TYPE stpo-meins,
menge TYPE stpo-menge, "Component Qty
END OF ty_stpo.
DATA: t_stpo TYPE STANDARD TABLE OF ty_stpo WITH HEADER LINE.
*-- BOM Header
TYPES: BEGIN OF ty_stko,
stlty TYPE stko-stlty,
stlnr TYPE stko-stlnr,
stlal TYPE stko-stlal,
stkoz TYPE stko-stkoz,
bmein TYPE stko-bmein,
bmeng TYPE stko-bmeng,
END OF ty_stko.
DATA: t_stko TYPE STANDARD TABLE OF ty_stko WITH HEADER LINE .
data : t_makt like makt occurs 0 with header line.
DATA: BEGIN OF cl_clstab OCCURS 0, "YHG079407
class LIKE klah-class, "YHG079407
klart LIKE klah-klart, "YHG079407
chked LIKE csdata-xfeld, "YHG079407
noobj LIKE csdata-xfeld, "YHG079407
dsply LIKE csdata-xfeld, "YHG079407
END OF cl_clstab.
*-- Header table
TYPES: BEGIN OF ty_main_material,
matnr TYPE mast-matnr, "Material
werks TYPE mast-werks, "Plant
maktx TYPE makt-maktx, "Description
stlal TYPE mast-stlal, "Alternative BOM
stlnr TYPE stko-stlnr, "BOM Number
bmein TYPE stko-bmein, "UOM
bmeng TYPE stko-bmeng, "Base Qty
expand(1) TYPE c, "Expanding Field
END OF ty_main_material.
DATA: t_main_material TYPE STANDARD TABLE OF ty_main_material WITH
HEADER LINE.
*-- Item (Component) Table
TYPES: BEGIN OF ty_item_material,
matnr TYPE mast-matnr, "Material
werks TYPE mast-werks, "Plant
idnrk TYPE stpo-idnrk, "Component (Material)
maktx TYPE makt-maktx, "Description
stlal TYPE mast-stlal, "Alternative BOM
stlnr TYPE stpo-stlnr, "BOM Number
meins TYPE stpo-meins, "UOM
menge TYPE stpo-menge, "Base Qty
END OF ty_item_material.
DATA: t_item_material TYPE STANDARD TABLE OF ty_item_material WITH
HEADER LINE.
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_werks LIKE marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS s_stlal FOR mast-stlal .
SELECT-OPTIONS s_stlan FOR mast-stlan DEFAULT '1'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bomlst RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECT-OPTIONS s_matnr FOR mast-matnr.
SELECTION-SCREEN SKIP.
PARAMETERS: p_compon RADIOBUTTON GROUP g1.
SELECT-OPTIONS: s_idnrk FOR stpo-idnrk.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
selection-screen begin of block b03 with frame title text-b03.
selection-screen begin of line.
selection-screen comment 1(40) text-005.
parameters: p_all radiobutton group r1 default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(40) text-006.
parameters: p_one radiobutton group r1 .
selection-screen end of line.
selection-screen end of block b03.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b3.
At slection screen events *
*-- Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
Intitialisation
INITIALIZATION.
g_repid = sy-repid.
g_tabname_header = 'T_MAIN_MATERIAL'.
g_tabname_item = 'T_ITEM_MATERIAL'.
*-- define keyinformation
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'MATNR'.
gs_keyinfo-item01 = 'MATNR'.
PERFORM e03_eventtab_build USING gt_events[].
PERFORM e04_comment_build USING gt_list_top_of_page[].
PERFORM e07_sp_group_build USING gt_sp_group[].
PERFORM e08_layout_build USING gs_layout.
Set Options: save variants userspecific or general
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = gx_variant-variant.
ENDIF.
S T A R T - O F - S E L E C T I O N *******************
start-of-selection.
if p_all = 'X'.
Get the data from MAST and MAKT Table
if p_bomlst = 'X'.
Get the data Based On Material #
perform get_data.
else.
Get the data Based On Component
perform get_data_component.
endif.
else.
Get the Single Level Report
*-- Moved the fiedl catalog here inorder to change the layout based on
*-- Selection
PERFORM e01_fieldcat_init USING gt_fieldcat[].
PERFORM select_data.
endif.
E N D - O F - S E L E C T I O N *******************
end-of-selection.
if p_one = 'X'.
perform alv.
endif.
User Command
at line-selection.
Interactive to CS03 Transaction
case sy-ucomm.
when 'PICK' or 'F2'.
if not alv_stb-idnrk is initial .
if not alv_stb-werks is initial.
if not alv_stb-objty is initial.
SET PARAMETER ID 'MAT' FIELD alv_stb-idnrk.
SET PARAMETER ID 'WRK' FIELD alv_stb-werks.
SET PARAMETER ID 'CSV' FIELD alv_stb-OBJTY.
call transaction c_tcode and skip first screen.
endif.
endif.
endif.
clear alv_stb.
endcase.
*& Form get_data
Get data from MAST and MAKT Table
FORM get_data.
data : wa_lines type sy-index.
REFRESH : T_MAST,
t_STB,
t_MATCAT,
alv_STB.
CLEAR : T_MAST,
t_STB,
t_MATCAT,
alv_STB.
Get the data from MAST Table
Get all the information from MAST - BOM Table
SELECT * FROM mast INTO TABLE t_mast WHERE matnr IN s_matnr AND
werks = p_werks AND
stlan IN s_stlan AND
stlal IN s_stlal.
describe table t_mast lines wa_lines.
if wa_lines is initial.
Write:/2 'List contains no data'.
stop.
endif.
loop at t_mast.
clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
if sy-tabix ne 1.
skip 1.
endif.
End of Change Seshu
Get the material Description
select single maktx from makt into v_maktx
where matnr = t_mast-matnr
and spras = 'E'.
Get the material details from STKO Table
select single * from stko into wa_stko
where STLTY = 'M'
and STLNR = t_mast-stlnr
and STLAL = t_mast-stlal.
Main Header for Each Material
format color 5 on.
write:/2 'Material',20 'Material Description',65 'Alternative BOM',
90 'Base Qty', 115 'Base Unit'.
format color 5 off.
format color 1 on.
write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
115 wa_stko-BMEIN.
format color 1 off.
Use the Function Module and get the format level by level
perform get_level_level.
endloop.
ENDFORM. " get_data
Top of page *
top-of-page.
perform report_header .
*& Form report_header
text
--> p1 text
<-- p2 text
FORM report_header.
new-page line-size 160 .
format color col_heading intensified on.
write:/ sy-uline(160) .
*--- Write Company Name.
perform calc_col_and_write using text-h00
sy-linsz.
*--- Write Report Title.
perform calc_col_and_write using sy-title
sy-linsz.
*--- Write User Id, Date / Time, Program Id, Page etc.
perform write_other_hdr_details.
write:/ sy-uline(160) .
ENDFORM. " report_header
*& Form calc_col_and_write
text
-->P_TEXT_H00 text
-->P_SY_LINSZ text
FORM calc_col_and_write USING P_TEXT
P_LINSZ.
data: col1 type i,
col2 type i,
len type i,
str type i.
str = strlen( p_text ).
col1 = ( p_linsz / 2 ) - ( str / 2 ) .
len = p_linsz - col1 - 2.
write: at /1 '|'.
write: at col1 p_text,
at sy-colno(len) space.
write at 160 '|'.
ENDFORM. " calc_col_and_write
*& Form write_other_hdr_details
text
--> p1 text
<-- p2 text
FORM write_other_hdr_details.
data: col1 type i,
col2 type i,
len type i.
col1 = 3.
write:/1 '|'.
write: at col1 'UserId : ',
sy-uname.
len = sy-linsz - 1.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Date: ',
sy-datum mm/dd/yyyy.
write: at sy-linsz '|'.
write:/1 '|'.
write: at col1 'ReportId: ',
sy-repid.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Page: ',
sy-pagno.
write: at sy-linsz '|'.
ENDFORM. " write_other_hdr_details
*& Form get_data_component
Get the data based on Component level
FORM get_data_component.
data wa_lines type i.
*-- Get the BOM item details
SELECT stlty stlnr stlkn stpoz idnrk meins menge
FROM stpo
INTO TABLE t_stpo
WHERE idnrk IN s_idnrk.
IF sy-subrc = 0.
CLEAR wa_lines.
DESCRIBE TABLE t_stpo LINES wa_lines.
IF wa_lines > 0.
SELECT stlty stlnr stlal stkoz bmein bmeng
FROM stko
INTO TABLE t_stko
FOR ALL ENTRIES IN t_stpo
WHERE stlnr = t_stpo-stlnr.
CLEAR wa_lines.
DELETE ADJACENT DUPLICATES FROM t_stko COMPARING ALL FIELDS.
DESCRIBE TABLE t_stko LINES wa_lines.
IF wa_lines > 0.
*-- Get the BOM item details
SELECT * FROM mast INTO TABLE t_mast FOR ALL ENTRIES IN t_stko
WHERE werks = p_werks AND
stlnr = t_stko-stlnr
and stlal in s_stlal.
ENDIF.
ENDIF.
else.
Write:/2 'List contains no data'.
stop.
endif.
loop at t_mast.
clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
if sy-tabix ne 1.
skip 1.
endif.
End of change Seshu
Get the material Description
select single maktx from makt into v_maktx
where matnr = t_mast-matnr
and spras = 'E'.
Get the material details from STKO Table
select single * from stko into wa_stko
where STLTY = 'M'
and STLNR = t_mast-stlnr
and STLAL = t_mast-stlal.
Main Header for Each Material
format color 5 on.
write:/2 'Material',20 'Material Description',65 'Alternative BOM',
90 'Base Qty', 115 'Base Unit'.
format color 5 off.
format color 1 on.
write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
115 wa_stko-BMEIN.
format color 1 off.
Use the Function Module and get the format level by level
perform get_level_level.
clear : t_mast.
endloop.
ENDFORM. " get_data_component
*& Form obj_ident
text
FORM obj_ident.
weder Mat noch Doc
CHECK: T_stb-objty NE otyp_mat,
T_stb-objty NE ootyp_mat,
T_stb-objty NE otyp_doc,
T_stb-objty NE otyp_ntm.
?T418-WA schon ok
nein
IF T_stb-postp NE t418-postp.
T418 einlesen
PERFORM t418_lesen USING T_stb-postp.
ENDIF.
PERFORM cl_clstab_maint.
?MatNr-Eingabe bei diesem PosTyp moeglich
und keine Textposition
trifft zu
IF t418-matin NE '-'
AND t418-txpos IS INITIAL.
aktuelles Objekt ist Material NLAG
T_stb-objty = '1'.
PosKurztext in ObjKurztext uebernehmen.
T_stb-ojtxp = T_stb-potx1.
MODIFY T_stb.
ELSE.
IF T_stb-objty IS INITIAL.
T_stb-objty = '2'.
MODIFY T_stb.
ENDIF.
ENDIF.
ENDFORM. " obj_ident
*& Form t418_lesen
text
-->P_T_STB_POSTP text
FORM t418_lesen USING lkl_postp LIKE stpo-postp.
T418-WA initialisieren
CLEAR:
t418.
Key angeben
t418-postp = lkl_postp.
PosTypDefinition lesen
READ TABLE t418.
ENDFORM. " t418_lesen
*& Form cl_clstab_maint
text
FORM cl_clstab_maint.
nur fuer Klassenpositionen
CHECK t_STB-OBJTY EQ OTYP_KLA.
Teilkey der Klassenpositionentabelle
CL_CLSTAB-CLASS = t_STB-CLASS.
CL_CLSTAB-KLART = t_STB-KLART.
Klassenpositionentabelle lesen
READ TABLE CL_CLSTAB
WITH KEY CL_CLSTAB(21)
BINARY SEARCH.
aktuelle Klassenposition bereits in Klassenpositionentabelle
nein
IF SY-SUBRC <> 0.
Klassenposition in Klassenpositionentabelle hinzufuegen
INSERT CL_CLSTAB INDEX SY-TABIX.
ENDIF.
ENDFORM. " cl_clstab_maint
*& Form alv_stb_prep
Printing the data as LEVEL BY LEVEL
FORM alv_stb_prep.
CLEAR:
alv_stb,
stb_orig,
stb_add.
IF t_stb-hdnfo IS INITIAL.
stb_orig = t_stb.
IF t_stb-mngko >= max_num.
stb_add-ovfls = ueberl_kz.
ELSE.
IF t_stb-mngko <= min_num.
stb_add-ovfls = ueberl_kz.
ELSE.
CLEAR: stb_add-ovfls.
ENDIF.
ENDIF.
IF NOT t_stb-xtlnr IS INITIAL.
stb_add-bomfl = b_flag.
ENDIF.
IF NOT t_stb-knobj IS INITIAL
OR NOT t_stb-class IS INITIAL
OR NOT t_stb-kzclb IS INITIAL.
stb_add-knofl = 'X'.
ENDIF.
ELSE.
CHECK t_stb-stufe > 1.
alv_stb-info = 'C30'.
IF t_stb-ttidx <> t_matcat-index.
READ TABLE t_matcat INDEX t_stb-ttidx.
ENDIF.
stb_orig-hdnfo = t_stb-hdnfo.
stb_orig-stufe = t_stb-stufe - 1 .
stb_orig-ojtxp = t_stb-ojtxb.
IF NOT t_stb-altst IS INITIAL.
stb_orig-stlal = t_stb-stlal.
IF stb_orig-stlal(1) EQ '0'.
stb_orig-stlal(1) = ' '.
ENDIF.
ENDIF.
stb_orig-idnrk = t_matcat-matnr.
ENDIF.
CLEAR:
stb_add-dobjt,
stb_add-objic.
CASE t_stb-objty.
WHEN otyp_mat.
WRITE: stb_orig-idnrk TO ecfld.
stb_add-objic = '@A6@'.
WHEN 'M'.
WRITE: stb_orig-idnrk TO ecfld.
stb_add-objic = '@A6@'.
WHEN otyp_noo.
WRITE: stb_orig-potx1 TO ecfld.
stb_add-objic = '@0Q@'.
WHEN otyp_doc.
write stb_orig-doknr to ecfld. "note 489354
IF ecfld CP '*# '. ENDIF. "note 489354
sy-fdpos = sy-fdpos + 1. "note 489354
CONCATENATE
*d stb_orig-doknr "note 489354
stb_orig-dokar
stb_orig-doktl
stb_orig-dokvr
*d INTO ecfld "note 489354
INTO ecfld+sy-fdpos "note 489354
SEPARATED BY space.
stb_add-objic = '@AR@'.
WHEN otyp_kla.
CONCATENATE
stb_orig-class
stb_orig-klart
INTO ecfld
SEPARATED BY space.
stb_add-objic = '@7C@'.
WHEN otyp_ntm.
WRITE: stb_orig-intrm TO ecfld.
WHEN OTHERS.
ENDCASE.
*d CONDENSE ecfld. "note 515408
stb_add-dobjt = ecfld(40).
CLEAR: ecfld.
WRITE stb_orig-stufe TO stb_add-dstuf NO-SIGN.
*d MOVE-CORRESPONDING stb_orig TO alv_stb. "note 331962
MOVE-CORRESPONDING stb_add TO alv_stb.
MOVE-CORRESPONDING stb_orig TO alv_stb. "note 331962
APPEND alv_stb.
ENDFORM. " alv_stb_prep
*& Form get_level_level
text
FORM get_level_level.
REFRESH : T_STB,
T_MATCAT,
ALV_STB.
CLEAR : T_STB,
T_MATCAT,
ALV_STB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'PP01'
datuv = sy-datum
mktls = 'X'
mehrs = 'X'
mtnrv = t_mast-matnr
stlal = '01'
stlan = '1'
stpst = 0
svwvo = 'X'
werks = p_werks
vrsvo = 'X'
TABLES
stb = t_stb
matcat = t_matcat
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: hd_tab.
Entry der KlassenstatusTab. initialisieren
cl_clstab,
Entry 'Objekte von Klassen' initialisieren
cl_objmemo.
REFRESH: hd_tab.
SORT t_matcat BY index ASCENDING.
Get the All levels
loop at t_stb.
IF NOT t_stb-hdnfo IS INITIAL.
EXIT.
ENDIF.
Object Identification
PERFORM obj_ident.
READ TABLE hd_tab
WITH KEY stufe = t_stb-stufe
vwegx = t_stb-vwegx
BINARY SEARCH
TRANSPORTING NO FIELDS.
?gibt es diesen Satz schon
nein
IF sy-subrc <> 0.
dann in SFP-Infosatzverweistab. aufnehmen
*d APPEND HD_TAB. "HGH054648
hd_tab-stufe = t_stb-stufe.
"HGH054648
hd_tab-vwegx = t_stb-vwegx.
"HGH054648
INSERT hd_tab "HGH054648
INTO hd_tab "HGH054648
INDEX sy-tabix. "HGH054648
PosNr initialisieren
CLEAR: t_stb-posnr.
SFP-InfosatzKz setzen
t_stb-hdnfo = 'X'.
stb-objty = otyp_mat.
"HGE246532
als SFP-Infosatz in die STB aufnehmen
append t_stb.
ENDIF.
*del ENDIF.
clear t_stb.
endloop.
SORT t_stb ASCENDING BY stufe
index ASCENDING
*del POSNR ASCENDING. "HGC062735
posnr ASCENDING "HGC062735
hdnfo DESCENDING.
LOOP AT t_stb.
T_stb-index = sy-tabix.
MODIFY T_stb.
PERFORM alv_stb_prep.
ENDLOOP.
Displays the Value as Level by Level
loop at ALV_stb.
if sy-tabix = 1.
format color 3 on.
write:/2 'Level',12 'Item',22 'Component',
42 'Material Description',82 'Base Qty',
107 'Base Unit',120 'Assembly Indicator'.
format color 3 on.
endif.
if alv_stb-MEINs is initial.
v_flag = 'X'.
endif.
if v_flag = 'X'.
format color 5 on.
write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP.
format color 1 off.
else.
if alv_stb-STUFE = '1'.
format color 1 on.
write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs, 120 alv_stb-bomfl .
format color 1 off.
elseif alv_stb-STUFE = '2'.
format color 2 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl.
format color 2 off.
elseif alv_stb-STUFE = '3'.
format color 3 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 3 off.
elseif alv_stb-STUFE = '4'.
format color 4 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 4 off.
elseif alv_stb-STUFE = '5'.
format color 5 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 5 off.
elseif alv_stb-STUFE = '6'.
format color 7 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl.
format color 6 off.
elseif alv_stb-STUFE = '7'.
format color 7 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 7 off.
else.
format color 1 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 1 off.
endif.
endif.
hide: alv_stb.
clear : alv_stb.
clear v_flag.
endloop.
ENDFORM. " get_level_level
*& Form f4_for_variant
text
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
i_tabname_header = g_tabname_header
i_tabname_item = g_tabname_item
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f4_for_variant
FORM E03_EVENTTAB_BUILD *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
FORM E04_COMMENT_BUILD *
--> E04_LT_TOP_OF_PAGE -
Radio button field issue in the selection screen
Hi Folks,
I am using an LDB(Logical Data Base) of 'PNP' in my custom report and the LDB has a selection screen with different parameters .
My concern is, the selection screen has 6 Radio buttons from which if I select one from the first 5 Radio buttons the Dates highlighted should clear off, and when I click on Radio Button 'Other Period' the dates should display as shown .
Note: I am using the ECC 4.6C
Please suggest any solution to achieve this functionality .
Thanks,
Sujay.VHi,
Consider your radio buttons looks like below:
PARAMETERS: RADIO1 RADIOBUTTON GROUP R1 MODIF ID RA1, "Today
RADIO2 RADIOBUTTON GROUP R1 MODIF ID RA2, "Current Month
RADIO3 RADIOBUTTON GROUP R1 MODIF ID RA3, "Current Year
RADIO4 RADIOBUTTON GROUP R1 MODIF ID RA4, " Up to today
RADIO5 RADIOBUTTON GROUP R1 MODIF ID RA5, "From today
RADIO6 RADIOBUTTON GROUP R1 MODIF ID RA6. "Other period
AT SELECTION-SCREEN.
IF RADIO1 EQ 'X' OR RADIO2 EQ 'X' OR RADIO3 EQ 'X'
OR RADIO4 EQ 'X' OR RADIO5 EQ 'X'.
CLEAR: "Add your date variables here
ELSEIF RADIO6 EQ 'X'
ADD Logic for your date variable here
ENDIF.
Hope this will help you .
regards,
Rajesh Sadula. -
How to create radio button between two slection screen
hello all.
could you please guide me how to create radio button between two SELECTION-SCREEN in screen painter.
Thank you,
srinivashi
SEE THIS CODE
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
MATNR LIKE MARA-MATNR,
WERKS LIKE MARC-WERKS,
PSTAT LIKE MARC-PSTAT,
EKGRP LIKE MARC-EKGRP,
END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
EBELN LIKE EKKO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
WERKS LIKE EKPO-WERKS,
LGORT LIKE EKPO-LGORT,
END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R3 RADIOBUTTON GROUP G2 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R4 RADIOBUTTON GROUP G2.
SELECTION-SCREEN COMMENT 5(20) TEXT-004 FOR FIELD R4.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
<b>rEWARD IF USEFULL</b> -
I am getting two different versions of the App Store in iOS 6.
I am getting two different versions of the App Store in iOS 6. One is the new one and sometimes when I open it it goes to the old one and says cannot connect to the App Store.
I am having the same problem, but I think I might know what's causing it. I just updated my girlfriend's iPhone 4S (same phone as mine) to iOS 6 and was surprised to find that her app store is working just fine. When I opened hers, however, I did notice that the "Categories" and "Top 25" buttons are totally different; and those happen to be the two buttons that are not working for me. Mine shows the same that yours does, while hers has the "Genius" and "Charts" buttons in the place of the two that are not functioning for me. I believe these old buttons are no longer active and therefor are bombing out when attempting to access them.
Now I said I think I may understand the problem, but unfortunately I have no idea what the solution may be. Hopefully this tread doesn't fade away and our problem gets addressed. -
Collecting data from advantech-usb4704 with two different apps at the same time
I wonder if I can access to Advantech-4704 with two different applications at the same time?
I use this block in my vis.
I have enough ports, but inputs are needed in completely different applications. Do I have to close one of them or can they run simultaneously?
Thankyou!Dear gtu,
as nathand said, usually it is not supported to access the same physical resource simultaneously from multiple programs. In case of DAQmx for instance, you will get an error message which says that the resource is already reserved. I suppose the same would happen with your driver, however it might be worth a try.
One workaround could be however if you revise your applications and merge the codes if it is possible so that no concurent resource allocation takes place.
Best Regards,
Adam Cseh
Applications/Systems Engineer
National Instruments -
I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?
Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library. -
HT201269 Can I set up two accounts for two different iPhones on the same iTunes account. Jimmy
Hello,
CanI set up two accounts for two different iPhones on the same iTunes account. Thanks JIMMYhttp://support.apple.com/kb/ht1495
You can use the same apple id for two separate phoones to share apps/music, however you would need a separate apple id for both phone for imessage/facetime/icloud. -
How do I sync two ipods with two different IDs on the same computer?
How do I sync two ipods with two different IDs on the same computer?
Simply connect them. One computer with one iTunes can manage multiple devices. They're tracked by S/N but you might wish to assign them unique names so that you can track them yourself.
The only minor issue is app updating and purchases while on the computer. It's necessary to log out and back in to the "correct" ID. Much easier to do these things from the iPods. -
I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?
Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.
Maybe you are looking for
-
Hi, I have a MBP Mid 2009 8gb ram 2.24 ghz unibody model. Recently I wanted to just give a power bost to my existing machine rather than buying out a new one. So, I decided to get a crucial SSD and a new battery (as the old one had already passed the
-
This is my first post in this forum regarding query tuning, so my sincere apologies in advance if I have: 1) not included sufficient information, 2) included too much information, 3) not posted to the correct forum I read through Randolf Geist's web
-
Adding Partner field in Derivation Strategy
Hello Sapians, I am trying add the Partner field (Forwarding Agent) to the derivation Strategy from the Invoice and not from the Sales Order. I was able to find the Forwarding Agent field in PAPARTNER Table. So I created the field in KEA5, update the
-
Need sugetion for deleting credit card Transaction (i-Expense)
Hi, I have few credit card transaction records in i-expense . these records are not required by customer and he want to delete these data. is there any API available for deletion of these records or any work arround. Thanks in Advance, Ajit
-
Doubts in Implementation project
Hi, can somebody guide me for the following terms in implementation porject? 1. Function specification 2. Business blueprint 3. Functional design document 4.Technical design documnet 5. FD & Td's can u explain me what is the sequence of documents in