Radio Buttons Not Appearing in Quiz

I created a quiz in Captivate 5.5 then upgraded to Captivate 6. When I run the quiz locally, the radio buttons appear next to the possible answers and everything works fine. When I run the quiz in our LMS, the radio buttons do not appear. Anyone else having this issue or have any insight?

Hi Anjaneai,
For some clarification, we are loading the Captivate 6 quiz swf into another swf. When we play the quiz swf alone, the radio buttons appear. However when we play the quiz swf within the other swf, the radio buttons disappear. To reiternate, we loaded Captivate 5.5 quiz swfs into another swf and the buttons appeared. Do you what the difference between the Captivate versions could be or have any insight?
We've already looked into some of your suggestions (the Flash player is not the issue) and am looking into your other suggestions.
Below is the screen shot you requested.
Thanks again for your assistance.

Similar Messages

Button not appearing on quiz pass

Hi All,
I'm trying to get a button to appear on a quiz when someone passes successfully. This button will be a link to another .swf file that will pulled into the project in Aggregator. The link is working fine, but I cannot get the smartshape to appear successfully when the quiz is passed. I have used the cpInfoPassFail Advanced Action set to greater than 1, visibility is turned off and execute advanced action is set in the Action property box, but still it does not show. I've working round and round and circles with this all day, trying different advanced actions, visibility on, off... and nothing is working with it.
If anyone has any suggestions how and why this not working, I'd really appreciate it. I'm not finding Captivate particularly intuitive at the moment and am seriously considering heading over the Storyline.

cpInfoPassFail will never be greater than 1; it has only two values: 0 if failed, and 1 if passed. It is a boolean variable.
When looking at your action: I thought you wanted to open the URL using the shape button, but you put the command Open immediately after showing the shape? That part should be triggered by the shape button. I hope you configured it as a button?
http://lilybiri.posterous.com/why-i-like-shape-buttons-captivate-6
Have a look at this blog post, it has a link to a list explaining all system variables.
http://lilybiri.posterous.com/system-variables-in-captivate-6
Lilybiri

TS5181 iTunes radio does not appear in "Music" on my iPod Touch, Why?

iTunes radio does not appear in "Music" on my iPod Touch. How can I fix this?

Ok, I have resolved this issue myself. I contacted Apple support but they had no clue.
The resolution is this, bring Siri up and say "radio". Radio comes up and you touch "now playing". Believe it or not the radio icon appears and remains.
I hope that helps other folk.

Buttons not appearing clearly upon output

I have created menu buttons (with highlight) that in turn link to the relevant movie file.
When outputted to DVD these buttons appear blurry and unclear.
Why are the buttons not appearing in a crisp, clean state when I have outputted them?

Which version of DVD SP are you using? Are you
making these over video menus? What size and color
of fonts/background? They can all play into what is
happening, usually 20pt + sans serif works best, but
the text in DVD SP can often leave things to be
desired from time to time - where are you previewing
the buttons?
Thanks for your reply.
The vesrion Im using is DV Studio Pro 3. The up state color of the buttons are black and over is red. The font size is 13pt Arial Black.
I have outputted the DVD itself, so I view it through TV.
Am I on the right track?
Thanks again.

Radio button not read successfully

Hi all,
I have a quick prototype APP I'm putting together in LabVIEW 8.2, under Windows XP, with a NI USB-6212 DAQ.
I am using daqMx to do group reads and writes, and the speed is acceptable.
However, I'm having an issue making a decision based on the user selection of a radio button.
At startup, I set the radio button to 'manual' programmatically. The other 2 options are 'semi-auto' and 'automated'.
I then enter a loop and allow the user to set up whatever parameters they need, etc.
There is a folder tab on the front page of the VI, but it is not directly related, and I don't read it's value (that is, I don't check to see which page is being used).
When the user presses 'Go', I read the value from the radio button (manual, semi-auto, or automated) as a selector in a case statement. Based on the user's setting of the radio button I set operational variables for use later in the program.
However, The functionality is not working as I expect. I placed flags within the case statement to see what it is doing, and the VI does not reliably execute the case statement 'option' which agrees with the setting of the radio button. Sometimes I set 'semi-auto' and the case statement for 'manual' is executed.
I had been reading the radio button from a 'local variable', so I swapped that around and I read from the 'terminal' now. No change.
Any thoughts? Do I have to do something before I can read the radio buttons reliably?
Thanks,
Jeff

Hi again.
Thank you for your responses. I was putting together a small application to show the problem, and was able to recreate it.
Then I noticed that I was reading the radio button outside of any structure, thereforfe it was pulling in an undefined value before the user clicked 'start'.
I checked my 'real' code and that appears to be the problem.
Once I placed the 'read' of the radio button inside a control structure, so that I defined when it was read, all is good.
Thanks,
Jeff

Navigaion buttons not appearing for .swf publication

I have a .swf file where the navigation buttons are not
appearing.

I have the same problem - I created a Captivate 2
presentation, and when I preview, the playback controls are there,
but when I publish it, it has no controls. I keep checking Skins
and it says there it's turned on. And the controls did show at
first, but have stopped and I have no idea how they could have got
'suppressed.'
I got so desperate I tried creating a new project and
importing all the slides into it, but... still the same, whatever
setting is causing this came along with the slides. I have both
info and quiz slides, but playback controls don't appear on any of
them.
Anybody?

Radio button not lining up

Somehow my radio button are not lining up with my text that
is following them. I have the following html:
<input type="radio" id="pollType2" name="pollType"
value="deterministic" /><span
class="radioTxt">Factual</span></input>
My CSS looks like this, but does not seem to do anything.
What am I missing?
.radioTxt {padding: 0 5px 10px 2px;}

Hi again.
Thank you for your responses. I was putting together a small application to show the problem, and was able to recreate it.
Then I noticed that I was reading the radio button outside of any structure, thereforfe it was pulling in an undefined value before the user clicked 'start'.
I checked my 'real' code and that appears to be the problem.
Once I placed the 'read' of the radio button inside a control structure, so that I defined when it was read, all is good.
Thanks,
Jeff

Itouch5 why when I open up the music app iTunes Radio does not appear I have iOS 7 and I am in the US also any answers?

I have iOS 7 and am using an itouch 5 in the United States but iTunes Radio is not opening when I go to the music app any solutions?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
The above reset work for some users
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Values of checkboxes and radio buttons not recognised

Hi folks,
I have a bit of a strange problem and I'm hoping you can help shed some light.
Basically I have a form with various elements in it, some of which seem to have a problem telling my pl/sql code what their values are. The culprits seem to be radio buttons and check boxes. Now those are individual items created with the wizard within a specific section if the outcome is different from sql created form elements in tables.
The radio buttons is one field, let's call it :P100_RADIO which returns either 'AB', 'CD' or 'EF'. The checkbox, let's call it :P100_CHECKBOX is just one checkbox returning the value 'Y' if it's checked.
after submit, I have a process which among other things checks the value returned by those two elements to set a variable v_paid either as 'Y' or 'N'
as a small summary of what I'm trying to do, here's a code snippet:
v_checkbox varchar2(1);
v_paid varchar2(1);
begin
v_checkbox := :P100_CHECKBOX;
if v_checkbox is not null AND :P100_RADIO = 'CD' THEN
v_paid := 'Y';
else
v_paid := 'N';
end if;
end;If I submit my form I get the error message
"ORA-06502: PL/SQL: numeric or value error: character to number conversion error"If I change the condition to v_checkbox is not null only, I get the same error
If I change it to v_checkbox != '' I don't get an error but v_paid is set with 'N'
If I change it to v_checkbox = 'Y', I get the same error again
If I change it to *:P100_RADIO = 'CD'* only, I get the error as well.
I also mistakenly tried v_checkbox is null and it submitted fine, though the value of v_paid was still 'N'
I've tried changing the varchar2(1) to something greater, up to varchar2(4000) but that didn't make any difference.
So I seem to understand there's a discrepancy of types somewhere but I can't work out where or how to change that. In my code an insert is performed after the if statement and the value of :P100_RADIO is added to the table with the expected value.
After looking at the source of the page produced by Apex, I also tried to replace :P100_CHECKBOX with :P100_CHECKBOX_0 but that didn't make a difference either. It's possible Apex thinks :P100_RADIO and :P100_CHECKBOX are supposed to return some sort of arrays but just why it would just return a string in an sql statement beats me.
The worst thing is, I'm fairly certain the code worked the first time I implemented it. So if anyone has any idea of what's going on that would be quite helpful. As always, I have a nagging suspicion it's a silly tiny mistake somewhere I just can't see.
Thanks folks :)

okay here's the code for the whole procedure. Some variable names have been changed but it's otherwise the same code:
DECLARE
v_total_cost     NUMBER(10,2);
v_deposit        NUMBER(10,2);
v_remaining      NUMBER(10,2);
v_payment_type   varchar2(2);
v_checkbox       varchar2(4000);
v_user           varchar2(4000);
v_bok_paid       varchar2(1);
v_msg            varchar2(4000);
BEGIN
v_total_cost     := :P100_COST;
v_deposit        := :P100_DEPOSIT;
v_remaining      := v_total_cost - v_deposit;
v_payment_type   := :P100_PAYMENT_AMOUNT;
v_checkbox       := :P100_CHECKBOX;
v_user           := :APP_USER;
--wwv_flow.debug('before condition');
if v_checkbox != '' AND :P100_RADIO = 'CD' THEN
v_bok_paid := 'Y';
else
v_bok_paid := 'N';
end if;
--wwv_flow.debug('after condition');
IF v_payment_type = 'D' THEN
:P100_AMOUNT_TO_PAY := :P100_DEPOSIT;
INSERT INTO SAL_TRANSACTIONS (TRA_BKG_ID, TRA_COST, TRA_TOTAL,TRA_TYPE, TRA_PAID, TRA_PAY_TYPE, TRA_DATE, TRA_MANUAL, TRA_USER)
VALUES (:P100_BKG_ID, 0, v_deposit, v_payment_type, v_bok_paid, :P100_RADIO, SYSDATE, v_checkbox, v_user);
INSERT INTO SAL_TRANSACTIONS (TRA_BKG_ID, TRA_COST, TRA_TOTAL,TRA_TYPE, TRA_PAID, TRA_PAY_TYPE, TRA_DATE, TRA_MANUAL, TRA_USER)
VALUES (:P100_BKG_ID, 0, v_remaining, 'L','N', null, SYSDATE, v_checkbox, v_user);
ELSIF v_payment_type = 'F' THEN
:P100_AMOUNT_TO_PAY := :P100_COST;
INSERT INTO SAL_TRANSACTIONS (TRA_BKG_ID, TRA_COST, TRA_TOTAL,TRA_TYPE, TRA_PAID, TRA_PAY_TYPE, TRA_DATE, TRA_MANUAL, TRA_USER)
VALUES (:P100_BKG_ID, 0, v_total_cost, :P100_PAYMENT_AMOUNT, v_bok_paid, :P100_RADIO, SYSDATE, v_checkbox, v_user);
END IF;
:P100_TRANSACTION_FLAG := '1';
if v_bok_paid = 'Y' then
v_msg := '<div>Message clipped</div>';
--send confirmation email
GLO_CORRESPONDANCE.proc_corr_controller(
:P100_BOOKING_MEMBER_ID,
:P100_BKG_ID,
null,
v_msg,
'E',
'Payment confirmation',
null
end if;
END;Thanks :)

Radio Buttons not working in Mozilla firefox

Hi,
I want one solution, i have done some enhancement in my application in which if we click on radio button(Yes) the corresponding fields(select list,shuttle fields will be shown) or else it will be hidden. My problem here is this works fine in IE but it does not work with Mozilla Firefox, can anybody please help me to sort my problem.
Thanks,
Dil
Edited by: dil84 on Nov 18, 2009 2:29 AM

Thanks for your interest. Here is a page where it does not work: http://foundation.zurb.com/docs/components/switch.html . Radio button is too small (only click on the top right corner can toggle the button).

ADF Buttons not appearing correctly

I've tried researching this problem and from what I've found it has said if we are using JDK version 1.4 and headless = true then we shouldn't have this problem. When running our application some of our ADF buttons will appear correctly and others will not.
When I look in our
application-deployments/../temp/adf/images/cache/en/
directory I can see the images of the buttons that appear correctly, but if I navigate to another page with different buttons I would then expect to see those images being creating in that folder but there are not. If anyone has any insight on this problem it would be a big help. Thanks.

Nothing leaps to mind that affected downloadable fonts in Firefox 34... but there are hundreds of changes in each version so I can't rule it out.
Just to go back to basics for a moment...
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

Why are my radio buttons not renaming in pages spawned from a hidden template?

Hi Everyone,
I am new to PDF forms, and have never before tried to use JavaScripts. However, I have been able to learn a lot and I have followed many threads and have almost accomplished what I want, but have hit a block. I don't understand the JavaScript well enough to locate my problem. Your help is greatly appreciated.
SYSTEM SPECS: Adobe Acrobat X Pro Mac OS 10.8.5
WHAT I WANT: To create a multi-page (100 pages) form for grading student assignments. Each page must have the same fields, but as each page belongs to a new student, it needs to have different values in the fields on different pages. Each page has 4 questions to score, with 4 score possibilities for each question (0, 1, 2, 3 points), and so only one score should be able to be selected per question.
WHAT I HAVE DONE, following the directions on this thread (Re: Multiple pages form) ):
1) Created a form with a field for student name and 4 sets of radio buttons (Labeled Questions 1-4, with score choices 0-3).
2) Placed a button at the bottom of the page that will spawn a new page and rename fields.
3) Defined this page as a template.
4) Spawned a page.
5) Made the template "hidden."
THE PROBLEM: Steps 1-4 above work perfectly--as long as the template (named "Form") is visible, when I click the button, a new page generates and the student name field renames the fields on Page 2 to "P2.Form.Student ID #" and the radio buttons rename to "P2.Form.Question 1" etc. Each time I press the button, it renames everything appropriately.
However, if I hide the template, then when I click the button on page 1, the fields on Page 2 are renamed to "P1.Form.StudentID ##1." AND THE RADIO BUTTONS DO NOT RENAME. They get the name "P1.Form.Question 1" etc. So the student name field did rename in a way that allows me to enter a new name on each page, but it isn't actually reflecting that I am on page 2, and as for the radio buttons, at that point, I cannot enter different scores on different pages because they are all part of the same radio button grouping.
If I use check boxes, they rename similarly to the student ID field, but I don't want to use check boxes because I want to return one possible score value for each question for tabulating the data. I don't want to leave the template visible because when I distribute this form to other graders, they may enter values into the template page without realizing it, and then when the spawn forms they will have wrong data already entered.
Here is the script that I have set as the button's Mouse Up script:
// Specify the name of the template
var template_name = "Form";
// Get a reference to the template
var t = getTemplate(template_name);
// Add a new page based on the template
if (t !== null) {
    t.spawn({
    nPage: numPages,      // Add the new page to end of document
    bOverlay: false,      // Create a new page, not an overlay
    bRename: true         // Rename the fields
} else {
   app.alert("The template named \'" + template_name + " does not exist in this document.", 1);
Thanks for your help

Hi again GKaiseril,
If you have the time, would you be able to tell me how to do that? I tried just changing the page number of the template page to zero, but I get the error "Please enter a starting value of at least 1." I definitely noticed that all of the discussions about similar subject do all say to somehow put the first page of the form before the template and then hide the template, but I don't think that I know how to do that. I read your response on this discussion "Re: Self replicating form pages in Acrobat Pro 9 (Win XP)" before I ever started this discussion, but have to admit that I can't figure out how to follow your advice "When I create a from that uses a template, I create the template and then spawn the 1st page of the form before the template and then work out the scripting for the 1st page and template and then hide the template."
Thanks

ValueChangeListener in Radio Button not acting after first time

Hi,
I am using ADF-BC-JSF in Jdev 10.1.3.3. I have a page on which there are 2 radio buttons which show blank at first. As soon as a user selects a radio button, the valueChangeListener calls up a method in the backing bean that opens a dialog for the user. User enters some text in to the dialog and clicks OK after which the window closes. If the user clicks Cancel on the dialog page, the window is still closed but radio button value is reset to blank through javascript. the problem is that it works only first time. second time it tries to autosubmit but only the constructor of the backing bean is called and not the actual function to open the window. Following is the code snippet that may be helpful.
Radio Buttons
<af:selectOneRadio value="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.inputValue}"
layout="horizontal"
id="metallurgistRadioBtn"
autoSubmit="true"
valueChangeListener="#{UploadDownloadBean.exampleOpenDialog}"
disabled="#{ !UserInfo.metallurgist || bindings.SP11WarrantDetailsViewMetallurgistReviewStatus !=''}">
<af:validator binding="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.validator}"/>
<af:selectItem label="Approved" value="Approved"/>
<af:selectItem label="Rejected" value="Rejected"/>
</af:selectOneRadio>
Function to Open the Window
public void exampleOpenDialog(ValueChangeEvent valueChangeEvent)
// Add event code here...
FacesContext context = FacesContext.getCurrentInstance();
// Create the dialog UIViewRoot
ViewHandler viewHandler = context.getApplication().getViewHandler();
UIViewRoot dialog = viewHandler.createView(context,"/sp11/warrant/MetallurgistNotes.jspx");
HashMap properties = new HashMap();
AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
afContext.launchDialog(dialog,
null, // not launched from any component
null, // no particular parameters
true, //show in dialog
properties);
Javscript for resetting the Radiob button
function closeWindowOnCancel()
if(parent.window.opener.document.getElementById("notesValueHolder").value == '' )
parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[0].checked = false;
parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[1].checked = false;
Please suggest what can be the possible cause.
Regards,
Neeraj

Hi,
I am using ADF-BC-JSF in Jdev 10.1.3.3. I have a page on which there are 2 radio buttons which show blank at first. As soon as a user selects a radio button, the valueChangeListener calls up a method in the backing bean that opens a dialog for the user. User enters some text in to the dialog and clicks OK after which the window closes. If the user clicks Cancel on the dialog page, the window is still closed but radio button value is reset to blank through javascript. the problem is that it works only first time. second time it tries to autosubmit but only the constructor of the backing bean is called and not the actual function to open the window. Following is the code snippet that may be helpful.
Radio Buttons
<af:selectOneRadio value="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.inputValue}"
layout="horizontal"
id="metallurgistRadioBtn"
autoSubmit="true"
valueChangeListener="#{UploadDownloadBean.exampleOpenDialog}"
disabled="#{ !UserInfo.metallurgist || bindings.SP11WarrantDetailsViewMetallurgistReviewStatus !=''}">
<af:validator binding="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.validator}"/>
<af:selectItem label="Approved" value="Approved"/>
<af:selectItem label="Rejected" value="Rejected"/>
</af:selectOneRadio>
Function to Open the Window
public void exampleOpenDialog(ValueChangeEvent valueChangeEvent)
// Add event code here...
FacesContext context = FacesContext.getCurrentInstance();
// Create the dialog UIViewRoot
ViewHandler viewHandler = context.getApplication().getViewHandler();
UIViewRoot dialog = viewHandler.createView(context,"/sp11/warrant/MetallurgistNotes.jspx");
HashMap properties = new HashMap();
AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
afContext.launchDialog(dialog,
null, // not launched from any component
null, // no particular parameters
true, //show in dialog
properties);
Javscript for resetting the Radiob button
function closeWindowOnCancel()
if(parent.window.opener.document.getElementById("notesValueHolder").value == '' )
parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[0].checked = false;
parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[1].checked = false;
Please suggest what can be the possible cause.
Regards,
Neeraj

Radio buttons not active

Two courses built in Captivate 3 have radio buttons that sometimes are inactive (for some users that is but not all). The users are telling me that they can't click on either answer button.   And if they click Submit it tells them "You did not answer this question completely". We are deploying this in Learn.com as AICC. What could be causing this?

Try rebooting your Z10, and then connect again to the PC. and try the sync.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Radio buttons not working after resetting

I have a form with two radio buttons for each question. Each question is in its own frame "Q1," "Q2," etc. I also have a btn_Reset created to reset the form, i.e. reset all radio buttons and return to "Q1" frame. All buttons work as they should, including resetting the radio buttons, however, once I reset the radio buttons and return to "Q1" to start over, the actions associated with each radio button upon clicking on them do not work. Here's my code:
//Frame "Begin"
gotoAndStop("Q1") //I also define my variables in frame "Begin"
//Frame "Q1"
rbtn_YESQ1.onPress = function():Void
     attachMovie("btnReset", "btn_Reset", 1, {_x:0, _y:0});
     btn_Reset.onRelease = function():Void
          xfa.host.resetData("radioGroupQ1"); //this resets my radio buttons in "Q1" frame
          gotoAndPlay("Begin");
//Once I return to "Begin" frame, my variables are reset to their initial value since that's where I originally defined them, and I go to "Q1" because that's what the code in frame "Begin" says. Here is where I click on rbtn_YESQ1 again and even though the button does fill in, it does not attach btn_Reset to the stage as defined by rbtn_YESQ1.onRelease function.
What am I doing wrong?

Here's the full code for the radio buttons:
////Code in frame "Q1"////
//rbtn_YESQ1 code
yesListener = new Object();
yesListener.click = function (evt)
    mc_EmptyReset.attachMovie("btnReset", "btn_Reset", 1);
    mc_EmptyReset.btn_Reset.onRelease = function():Void
        //Places "Reset Confirmation" window on top
        attachMovie("mcResetConfirmation", "mc_ResetConfirmation", getNextHighestDepth(), {_x:24.0, _y:56.0});
        resetConfirmationTween = new Tween(mc_ResetConfirmation, "_alpha", easeNone, 0, 100, .5, true);
        mc_ResetConfirmation.btn_No.onRelease = function():Void
            mc_ResetConfirmation.btn_No.enabled = false;
            mc_ResetConfirmation.btn_Yes.enabled = false;
            resetConfirmationTween.yoyo();
            resetConfirmationTween.onMotionFinished = function():Void
                removeMovieClip(mc_ResetConfirmation);
        mc_ResetConfirmation.btn_Yes.onRelease = function():Void
            mc_ResetConfirmation.btn_No.enabled = false;
            mc_ResetConfirmation.btn_Yes.enabled = false;
            resetConfirmationTween.yoyo();
            resetConfirmationTween.onMotionFinished = function():Void
                removeMovieClip(mc_ResetConfirmation);
                gotoAndPlay("Begin");
rbtn_YESQ1.addEventListener("click", yesListener);
//Same code as above btn_NOQ1
noListener = new Object();
noListener.click = function (evt)
     //same code as above...
rbtn_NOQ1.addEventListener("click", noListener);
////Code in frame "Begin"////
gotoAndStop("Q1");

Radio Buttons Not Appearing in Quiz

Similar Messages

Maybe you are looking for