Radio feature won't work in windows. Help Please!
I can't get the radio in itunes to work. I use Firefox and with their new update (foxy tunes) you can put your media player on the toolbar and not have to leave your browser to listen to the radio. I wanted to change from windows media player to itunes but the radio in itunes won't connect. It doesn't have anything to do with Firefox as I have tried it outside of it. I have used it before and it worked ok. I just updated and that may be the reason, but the update showed to be successful..??
Also the radio section is very limited, nothing like windows media player. Maybe I just don't know how to access it correctly ?? Anyone have any ideas?
Thanks
bayoubarbie
I found where to download it in bootcamp, I just can't find my usb drive I will need to buy a new one and then give it a shot. I am sure I will be back to ask more questions... thanks for your help.
Similar Messages
-
I have a new Dell, Windows 7. IE and Chrome work beautifully (I had to install these to get onto the Internet since Mozilla won't work). Older versions of Mozilla worked for a few seconds, but then the auto update kicked in (to 5.0). I even tried to stop the auto updates immediately after installing an earlier version, that didn't work either. Mozilla will not allow me to enter text, lets me enter a few letters then freezes. Please advise. Thank you, Mary
Hi Guys,
I had this same problem too, and i want to share to all of you my own fix for this kind of problem;
(READ FIRST: ''This step will wipeout everything that mozilla saved on your computer including : password, history and bookmarks''.)'''
'''1. download the Revo Uninstaller''''''
- quick step guide for this:
select mozilla firefox, don't forget to uninstall everything that relates to mozilla including registry to clean them all up.
'''2. download mozilla firefox again'''
- AND REINSTALL. however on this stage, in some cases mozilla will not open at this stage.
'''3. Uninstall Mozilla firefox again NOW using control panel.'''
'''4. Restart the computer to refresh everything.'''
'''5. Reinstall mozilla firefox again, once you have received the prompt for "exporting or importing etc.. etc.. from Microsoft" that means its already working.. it will take around 5-10 sec to load up (in my case) .''' -
Ipod 2nd generation won't work. Need Help PLEASE
i have a ipod 2nd generation and haven't used it for 3 months or more. and now that I try to turn it on, it won't turn on. I have tried charging it for 2 hours and still the screen stays black. need help. what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Error Message 8003?? Download won't work!! Help PLEASE!
Hi--
I have a new iPod nano (2d gen) and tried to download music onto it from the iTunes store. Each time, I am foiled at the downloading cycle with "Error Message 8003--unknown error." The download basically freezes between the store and the computer. What am I doing wrong?? Please help!!
Many thanks!!Hello tbsphoto,
Welcome to the BlackBerry Support Community Forums.
Based on the information that you have provided it looks like during the software update the device was not able to re connect to the Mac which in turn caused the 507 error on your BlackBerry Smartphone. The 507 error basically indicates that there is no OS on the device. This issue can be resolved by reloading the software on your BlackBerry Smartphone. I am attaching a link to our knowledge base with instructions on how to go about doing so on a Mac.
Link: http://www.blackberry.com/btsc/KB19767
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
Got a new PC with Windows 8. Now my CS6 for windows 7/XP won't work properly! HELP!
Got a new PC with Windows 8 and now my CS6 download for Windows 7/XP won't work perperly! HElP!
ANYBODY????
-
Magic Mouse won't work in Windows 7 anymore
Hey there,
I've got an iMac running OS X 10.6.8 and Windows 7 via Boot Camp. I just updated a bunch of the Apple stuff on Windows -- iTunes, Quicktime, "boot camp" (I assume that meant drivers and such), and whatnot. Now my Magic Mouse won't work in Windows 7. It was fine before, so I assume the update screwed something up. Help? I know nothing of retrieving old drivers and stuff like that.
Note: I am running Snow Leopard, NOT Lion.Hi bsruff,
If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
http://support.apple.com/kb/TS3092
Regards,
- Brenden -
Ff won't work on windows and can't get maintanence to work what do i do?
ff says its compatible,but windows says otherwise.ff freezes in the middle of anything, manly while loading a page.maintanence won't work at all help me!
How about trying a previous build of Firefox? Then, if that works, upgrade again to the next version until you find the culprit. Then, just stay with the previous build!
-
"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.
Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari -
my ipod nano FM radio does not work it only has European band and japan band and when you search to find a radio station I cant hear anything. Help please!!
Hi kahli:
Have a look at http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf
AND
http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf -
I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?
Freezing, or crashing?
ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
Do you happen to run a font manager? If so, which one, and waht version? -
I updated my phone to ios7 and it told me to connect to iTunes. When I did the phone said it needed to be restored. I did this and then iTunes said it can't be as it isn't eligible so now my phone won't turn on. Help please!
You can try to restore it via recovery mode as show in the link below:
http://support.apple.com/kb/ht1808 -
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
-
I have photoshop cs5 installed on desktop...got new Canon rebel T5i camera...cannot open RAW images...updated and installed plug-in...still not working...help please.
In any event, that camera was first supported by ACR version 7.4 which needs at least CS6 to run. Naturally, all later versions support it too.
Your choice is either to upgrade your Photoshop, or to look for, download, install, launch and run the free, stand-alone Adobe DNG Converter 8.6 on each folder containing your raw Canon files to convert them first to raw DNGs that you can open in CS5.
In no case does an Adobe application belong "on your desktop". The default install location should always be respected and left alone. -
aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks
“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony -
External display won't work on Window
Hi can anyone please help me in this? when I using window XP, my external display won't display out but when I'm using MAC OS X it work well, why? please help... Thanks
I can only help if you are using an NVidia graphics card, as with that you can use the NVidia Control Panel to setup the external display.
Connect the display
Start NVidia Control panel
Select the Display icon
Then select Change Display Configuration
There you can set the resolution, extend the screen or create a copy et.c.
Hope that helps...
Maybe you are looking for
-
I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Pr
-
Black screen & all menu items grayed out -help!
Sorry folks, total AE nube here, in over my head already. Having just purchased AE CS3 I'm completely adrift. I was in the process of looking at & changing preferences when shortly thereafter my screen went All black. A friend suggested it may have s
-
Registration of Business system for the Integration Engine Java in the SLD issue
Hi, We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully. - Configuration Wizard: PI-AEX initial setup - Configuration Wizard: PI Self Test for AEX However when we were Checking the AEX Configuration as per
-
Materail Matsters upload through lsmw error
Hi i am using recoding method in lsmw for uploading materail masters. how to select views.remaining steps i know. At the time of .txt file creation .normally any cheack boxes are there we mention "x" . in this time what we will mention (select views)
-
HT5622 you ask me for a promsoin code and i do not know what that is
it was coming up in red letters asking for code when reseting new password