Radio Fm in not functioning after upgarding firm w...
Hi,
radio Fm in not functioning after upgarding firm ware 410.21.010
please help to solve it
I am not aware of any "on-device" or native OS FM radio functions. Perhaps it has yet to be implemented, or awaiting a third party to develop an app to use it?
I'd love to have it functional also!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
I purchased a 3TB HDD (WD USB 3.0 $100) to replace the 2TB Seagate for a new Time Machine HDD. The 2B was full and backups were deleting older files. The 3TB was formatted NTFS and I want to "recover" the included SW before I reformatted the HDD for the iMac. I discovered that MacFuse was out of date and unsupported and my NTFS-32 was also out of date so I uninstalled both and then installed the most recent version of Tuxera NTFS for Mac. I rebooted and discovered that the FW800 port was unresponsive. Below is the EtreCheck report:
Problem description:
Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed Tuxera NTFS for Mac.
EtreCheck version: 2.0.8 (95)
Report generated October 30, 2014 7:11:17 PM EDT
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:17:34
Disk Information: ℹ️
WDC WD5000AAKS-40TMA0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
ML 10.8 (disk0s2) / [Startup]: 499.25 GB (20.92 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Hardware Monitor ƒ/HardwareMonitor.app
[loaded] com.bresink.driver.BRESINKx86Monitoring (7.0) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18615.948847) Support
[not loaded] com.parallels.kext.hypervisor (8.0 18615.948847) Support
[not loaded] com.parallels.kext.netbridge (8.0 18615.948847) Support
[not loaded] com.parallels.kext.usbconnect (8.0 18615.948847) Support
[not loaded] com.parallels.kext.vnic (8.0 18615.948847) Support
/Applications/Toast Titanium v11.1/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Applications/Toast Titanium/Toast Titanium v11.1 (1072).app
[not loaded] com.roxio.TDIXController (2.0) Support
/Library/Application Support/Symantec/AntiVirus
[loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.9.0 - SDK 10.6) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[loaded] com.logitech.manager.kernel.driver (4.10.0 - SDK 10.8) Support
[not loaded] com.olympus.CamBlockCommandsDevice (2.0.0) Support
[not loaded] com.olympus.CamBlockCommandsDeviceUP (2.0.0) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f1 - SDK 10.6) Support
[loaded] com.taoeffect.ispy.kext (2.0.2 - SDK 10.2) Support
/System/Library/Extensions/OlympusDSCDriver.kext/Contents/PlugIns
[not loaded] com.olympus.CamFWSerialBusProtocolTransport (2.0.0) Support
[not loaded] com.olympus.CamUSBMassStorageClass (2.0.0) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
/Users/[redacted]/Downloads/LCC Installer.app
[not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.canon.MFManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[running] com.logitech.manager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[loaded] com.embraceware.awaken.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.taoeffect.ispyd.plist Support
[running] com.wdc.drivemanagerservice.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.prosofteng.DGMonitor.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.taoeffect.EspionageHelper.plist Support
User Login Items: ℹ️
Speedy Mac Application (/Applications/Speedy Mac/Speedy Mac.app)
AwakenHelper Application (/Users/[redacted]/Library/Application Support/Awaken/AwakenHelper.app)
GetBackupAgent Application (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
WDDriveUtilityHelper Application (/Users/[redacted]/Downloads/WD/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
ClustersHelper Application (/Library/PreferencePanes/Clusters.prefPane/Contents/Resources/ClustersHelper.a pp)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
SAVDiskMountNotify UNKNOWN (missing value)
ScanNotification UNKNOWN (missing value)
Launch Nikon Message Center 2 Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 9.4.6 Support
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.6.8r638 Support
QuickTime Plugin: Version: 7.7.1
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.3.0 Release Support
ToontownBundleManager: Version: (null) Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
OVSHelper: Version: 1.0 Support
CoolirisWebKitPlugin: Version: (null) Support
Google Earth Web Plug-in: Version: 6.1 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
User Internet Plug-ins: ℹ️
BrowserPlus_2.9.2: Version: 2.9.2 Support
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
DivX HiQ
Aimersoft Video Converter
3rd Party Preference Panes: ℹ️
BrowserPlus Support
Clusters Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
Logi Preference Manager Support
MenuMeters Support
Perian Support
Symantec QuickMenu Support
TechTool Protection Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
iMac TimeMachine [Local]
Total size: 2 TB
Total number of backups: 80
Oldest backup: 2011-09-18 05:21:33 +0000
Last backup: 2014-10-05 20:18:55 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 0 B X 3)
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Top Processes by CPU: ℹ️
2% WindowServer
0% Speedy
0% SystemUIServer
0% RealPlayer Downloader Agent
0% ps
Top Processes by Memory: ℹ️
288 MB SymDaemon
150 MB Speedy
137 MB Safari
82 MB WebProcess
82 MB coreservicesd
Virtual Memory Information: ℹ️
2.17 GB Free RAM
1.46 GB Active RAM
148 MB Inactive RAM
518 MB Wired RAM
388 MB Page-ins
0 B Page-outs
I hope someone has some ideas! TIA.Do you have another cable you can test with? Do you have access to another computer with Firewire you can test with?
FireWire Device not Working
FireWire/USB - Quick Assist -
Customer exit is not functioning after ECC upgrade/support package
It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF. -
Help for OSX Server 3.2.2 could not open after upgarded Mac OSX Yosemite!
Dear All,
Please for solving my osx server 3.2.2 could not open and show failure after upgarded Mac OSX Yosemite.Version 3.2.2 does not work with Yosemite you'll need to upgrade to version 4.0 to get Server functionality.
Cheers HD -
Filteration not working after Upgarding 8.8 PL 20
Hi All,
We have recently upgarded sap B1 8.8 to PL 20 .In AR invoice cardcode choosefromlist I have applied a filteration .After upgardation the choose fromlist filteration is working fine but when we type something in the cardcode text box it will display matching results which is overriding my choosefromlist list filteration . Is there any way to filter that also ? Please see the below SAP note
1504754 - Fast locating of searchable data
Symptom
When user enters words in the some specific fields, for example, "Customer", "Name" or "Item No" in Sales Order form, system would show a list of options which match the inputted words. User could quickly choose the expected option from the list.
Thanks in advance
ArunIM running the latest 8.1.2. I've tried every suggestion I've read. Any other ideas
-
Ipad3 camera not functioning after connecting to laptop
After connecting ipad3 to my laptop to delete some photos, the camera does not function properly. it is slow and "saving photo" keep appearing when i capture. and no photos can be taken after that. what should i do?
Hello @Rob1216 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues scanning. I'd like to help!
Does this issue occur when making a copy as opposed to a scan?
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Live Internet audio stream not functioning after iTunes 10.5.3 update
Today my iTunes listed Internet audio stream for a local radio station will not play. i did perform the iTunes update for 10.5.3 3 days ago and the stream funcitoned then, but not today. Ugh. Any hints? Thanx everso!
Try downloading the package for new installs. the update package failed, but the new install package worked for me without any trouble.
History:
I began this trouble shooting exercise by selecting Download Only through the Apple Update applet. Running the msi manually did not resolve the problem. In fact, it was more frustrating because the download package would disappear after running even though it failed, and I had to download it again. "Cleanup" I suppose. <frown>
I followed advice to remove the Apple Software Update program, reboot and re-run the msi. That did not resolve the failure.
I then followed advice to set permissions for Administrators on registry key HKLM\Software\Micorosoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Com ponents
then reboot and run the update msi again. This also did not resolve the failure.
I downloaded the installer from the Apple download site as though it were a fresh install, and - voila! - it installed correctly and all content and settings were preserved. Hopefully that is all that is needed, not the steps above. Let me know! http://www.apple.com/itunes/download/ -
"Finder" does not function after installing Leopard on Mac G5
After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
*The Finder does not function and cannot be restarted. This seems to be the main problem.
I cannot log off or shut down and have to use the powerbutton to shut down.
When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
I can sometimes open programs but no longer "system preferences".
Is there anybody out there who can help me??
I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
HELP!After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
*The Finder does not function and cannot be restarted. This seems to be the main problem.
I cannot log off or shut down and have to use the powerbutton to shut down.
When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
I can sometimes open programs but no longer "system preferences".
Is there anybody out there who can help me??
I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
HELP! -
Oracle 10g not starting after upgarde
Hi,
Oracle not starting after upgrade and this service not starting automatically . This is error giving in the event viewer
Description:
The OracleDEV102iSQL*Plus service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Cheers
MuraliHi,
I cannot explain what went wrong.
The error indicate that the upgrade is not finished or an error happened during the upgrade.
Please, review the alert log and the upgrade logs.
There are some possibilities:
- First one is to finish the upgrade to Oracle 10.2 manually. Please, check the Metalink notes:
Note 316889.1 - Complete checklist for manual upgrades to 10gR2
Note:420146.1 - What is the Best Way to Upgrade to 10g?
- Second option is to restore the database to a point before the upgrade. In this case, you have to use the Oracle 9.2 software as well and need to restart the upgrade from the beginning. -
SD card reader not functioning after update to Mavericks
SD card reader no longer functioning after update to Mavericks
Had the same problem.
In Terminal, enter the command
Killall Finder
Worked for me - - SD card showed up when I next inserted it. -
Hyperlinks are not functioning after publishing
I am running iWeb 3.0.4 and am publishing to my host site through GoDaddy.com. The hyperlinks work fine in iWeb itself, but after I publish the site and then go to the site to check it, some hyperlinks work, but most don't. It appears to be very random which hyperlinks are working and which are not. After Enabling hyperlinks in iWeb and checking the box Make hyperlinks active, I am choosing to Link to > One of my pages. All seems to be in order but again, after publishing the site, only some hyperlinks work but most do not. I have tried modifying little things in iWeb to see if it will help upon publishing - over and over and over again - but to no avail. I cannot stress how irritating this problem is, not getting the site to work after publishing!!! UGH!
I've seen other posts regarding this issue and still have not found an applicable solution or at least one that is fixing my problem. Any other suggestions? Thank you.Thank you guys so much - specifically Old Toad, Cyclosaurus and Roddy - for helping me figure out what's wrong with my iWeb site! Just these little things you guys are suggesting are helping me slowly fix these subtle problems. I don't understand why these things that you guys are suggesting aren't explained somewhere in iWeb.
Because of your help I have been able to most of the hyperlinks to work now, but still not all of them. Still seems like I have to do some tweeking and moving around some of the text. I can't believe how inaccurate and inefficient iWeb is!
Anyway, Cyclosaurus - is there any way to shrink the size of the Canvas element so that I don't have to keep adjusting the text just to get the hyperlinks to work?
Thanks again!! -
Sony clock-radio docking station not compitable after 2.2.1 upgarde
After upgrading both my iPhones to 2.2.1, my Sony clock-radio docking station (icf-c1ipmk2)does not work with the iPhone anymore. The unit is made for iPhone and worked without any issues until the 2.2.1 upgrade.
Now every time I place the iPhone in the docking station, I get the following message on the iPhone:
"This accessory is not made to work with iPhone."
With the option to start in Airplane mode.
Is anyone else having the same issue? Is there any solution to this?Just FYI i have the next generation of Sony clock Radio ICF-CD3i(the round one with the pop out dock) and guess what "This accessorie not campatible with iPhone" though i can quite past the warning message then it works fine. The interesting part is i tried it out on another one at the shop at time of purchase and it worked fine. So long and short going to return it get another one see if that works. Just seems like Sony (Love there products not bagging them)need to put more work into working out the compatibility from their end
-
Greetings!!
I have recently been playing around with the amazing power of Python in Labview and have built some very functional VIs that utilize this tactic. However I now find myself at a bind. Everything runs great in the IDE, but not so great as a standalone application.
i am running:
Windows 7 64bit
Labview 2012 32bit
Python 2.7.3 32bit
My build specifications configuration attempts have all failed to run Python, and the application typically always return a very non descriptive error such as:
PYTHON New Session__ogtk.vi->NameOfMyVIFile.vi
I have tried adding DLLs to the "always include" section of the build spec.
DLLs such as:
Lvpython.dll
pytscript.dll
and I have even tried including them in both the support directory and the caller's directory to no avail. I have even tried placing the entire application + supporting files in my main Labview and python directories just to see their behavior with no apparent differences.
so now I’m left with no options that i can think of. and I'm sure I have crawled around Google so much now that I’ve read all the same posts and websites nearly three times already.
Please help me debug this!! I’m sure it’s something super simple but not very obvious that I’m missing.
I hope everyone has a great day, and thank you!
Grant.
Solved!
Go to Solution.My python installation folder is "C:\Python27" and python27.dll is located in there.
initially i ran the "PYTHON Set Server Path" with an input string equal to: 'C:\Python27\python27.dll' while in the IDE. i have read however that (as long as the system path in windows is configured correctly) passing a string of just 'python27.dll' would work, but i did not try this.
after that the "PYTHON Script Node" is what i used to test LabPython and all's ok in the IDE but not in applications.
i have also tried this as an executable:
Which porduces this: -
Buttons do not function after Flash Movie
I have a page with a number of buttons and a couple of flash
"list" components. One of these lists, gives the user an option to
select one of two modules and then navigates to a marker where a
flash movie plays. When the user exits the flash movie. This is
done via and exit button in the flash movie itself they returnt to
the page where they started. After navigating to that page
following the flash movie many but not all of the buttons are no
longer functional, e.g they do not receive mouseEnters etc.Are the buttons in question Director buttons or Flash
buttons? In either case, is the code for these buttons in a
behavior that is attached to each button? Is there any part of this
code that disables the button? -
ASA5505 L2L VPN does not function after move and reconfiguration
I have an ASA5505 that had multiple VPNs to both Cisco5505's and other Vendor security appliances. The one in question that moved to a new IP address checks out on isa sa, ipsec sa and nat, yet there is no communication accross the tunnel. This behavior is consistent accross all remote sites. The remote sites function normally. Below is the output with some show commands.
ASA Version 8.4(4)
hostname RitterBars
names
name 67.231.37.42 RitterLAB-ASA
name 67.231.37.45 RitterLAB-LB-WAN1
name 64.233.131.94 RitterLAB-LB-WAN3
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 3
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
description Port 7 on 9108
nameif outside
security-level 0
ip address dhcp setroute
interface Vlan3
no forward interface Vlan2
nameif CoreNetwork
security-level 0
ip address 172.20.10.22 255.255.255.128
boot system disk0:/asa844-k8.bin
ftp mode passive
clock timezone CST -6
clock summer-time CST recurring
object network obj-192.168.1.0
subnet 192.168.1.0 255.255.255.0
object network obj-192.168.9.0
subnet 192.168.9.0 255.255.255.0
object network obj-192.168.85.0
subnet 192.168.85.0 255.255.255.0
object network obj-10.200.1.0
subnet 10.200.1.0 255.255.255.0
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj-192.168.1.2
host 192.168.1.2
object service obj-tcp-source-eq-22
service tcp source eq ssh
object service obj-tcp-source-eq-5922
service tcp source eq 5922
object network obj-192.168.1.10
host 192.168.1.10
object service obj-tcp-source-eq-5125
service tcp source eq 5125
object service obj-tcp-source-eq-80
service tcp source eq www
object network obj-192.168.1.119
host 192.168.1.119
object service obj-udp-source-eq-69
service udp source eq tftp
object network obj-192.168.1.51
host 192.168.1.51
object service obj-tcp-source-eq-443
service tcp source eq https
object service obj-tcp-source-eq-5980
service tcp source eq 5980
object network obj-192.168.1.114
host 192.168.1.114
object network obj-96.43.39.27
host 96.43.39.27
object network obj-xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object-group network Inside
network-object 192.168.1.0 255.255.255.0
access-list split-tunnel extended permit ip 192.168.1.0 255.255.255.0 192.168.9.0 255.255.255.0
access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 192.168.9.0 255.255.255.0
access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 192.168.85.0 255.255.255.0
access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 10.200.1.0 255.255.255.0
access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list VPN2LAB extended permit ip 192.168.1.0 255.255.255.0 192.168.85.0 255.255.255.0
access-list VPN2LAB extended permit ip 192.168.1.0 255.255.255.0 10.200.1.0 255.255.255.0
access-list Barracudalab extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inat extended permit ip 192.168.1.0 255.255.255.0 any
access-list vnat extended permit ip 192.168.1.0 255.255.255.0 host 216.163.29.244
access-list out2in extended permit tcp host 64.233.128.6 host 192.168.1.2 eq ssh
access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.2 eq ssh
access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.10 eq 5125
access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.10 eq www
access-list out2in extended permit udp 64.233.128.0 255.255.255.0 host 192.168.1.119 eq tftp
access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.51 eq https
access-list out2in extended permit ip 64.233.128.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list out2in extended permit tcp any host 192.168.1.10 eq 5125
access-list out2in extended permit tcp any host 192.168.1.10 eq www
access-list out2in extended permit tcp any 192.168.1.0 255.255.255.0 eq ftp
access-list out2in extended permit tcp any 192.168.1.0 255.255.255.0 eq ftp-data
access-list out2in extended permit udp any host 192.168.1.119 eq tftp
access-list out2in extended permit tcp any host 192.168.1.51 eq https
access-list out2in extended permit icmp any any
pager lines 24
logging console alerts
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu CoreNetwork 1500
ip local pool vpn-pool 192.168.9.10-192.168.9.250
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-649.bin
no asdm history enable
arp timeout 14400
nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.9.0 obj-192.168.9.0 no-proxy-arp
nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.85.0 obj-192.168.85.0 no-proxy-arp
nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-10.200.1.0 obj-10.200.1.0 no-proxy-arp
nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
nat (inside,outside) source static obj-192.168.1.2 interface service obj-tcp-source-eq-22 obj-tcp-source-eq-5922
nat (inside,outside) source static obj-192.168.1.10 interface service obj-tcp-source-eq-5125 obj-tcp-source-eq-5125
nat (inside,outside) source static obj-192.168.1.10 interface service obj-tcp-source-eq-80 obj-tcp-source-eq-80
nat (inside,outside) source static obj-192.168.1.119 interface service obj-udp-source-eq-69 obj-udp-source-eq-69
nat (inside,outside) source static obj-192.168.1.51 interface service obj-tcp-source-eq-443 obj-tcp-source-eq-5980
nat (inside,outside) source static obj-192.168.1.114 obj-96.43.39.27
nat (inside,CoreNetwork) source dynamic obj-192.168.1.0 interface destination static obj-xxx.xxx.xxx.xxx obj-xxx.xxx.xxx.xxx
nat (inside,outside) source dynamic Inside interface
nat (inside,outside) after-auto source dynamic any interface
access-group out2in in interface outside
route CoreNetwork 172.20.30.0 255.255.255.248 172.20.10.1 1
route CoreNetwork 216.163.29.244 255.255.255.255 172.20.10.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 0:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set psset esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto map samap 1 match address VPN2LAB
crypto map samap 1 set peer RitterLAB-ASA
crypto map samap 1 set ikev1 transform-set ESP-AES-256-SHA
crypto map samap 2 match address Barracudalab
crypto map samap 2 set peer RitterLAB-LB-WAN1 RitterLAB-LB-WAN3
crypto map samap 2 set ikev1 transform-set ESP-3DES-SHA
crypto map samap interface outside
crypto isakmp identity address
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 11
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access inside
dhcpd dns 64.233.128.10 64.233.128.11
dhcpd auto_config outside
dhcpd address 192.168.1.100-192.168.1.150 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 66.187.233.4 source outside
ntp server 64.99.80.30 source outside
webvpn
username xxx.xxx.xxx.xxx password xxx.xxx.xxx.xxx encrypted privilege 15
username xxx.xxx.xxx.xxx attributes
vpn-group-policy WebVPNpolicy
username xxx.xxx.xxx.xxx password xxx.xxx.xxx.xxx encrypted privilege 15
username xxx.xxx.xxx.xxx attributes
vpn-group-policy WebVPNpolicy
tunnel-group 67.231.37.42 type ipsec-l2l
tunnel-group 67.231.37.42 ipsec-attributes
ikev1 pre-shared-key xxx.xxx.xxx.xxx
tunnel-group 67.231.37.45 type ipsec-l2l
tunnel-group 67.231.37.45 ipsec-attributes
ikev1 pre-shared-key xxx.xxx.xxx.xxx
tunnel-group 64.233.131.94 type ipsec-l2l
tunnel-group 64.233.131.94 ipsec-attributes
ikev1 pre-shared-key xxx.xxx.xxx.xxx
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect ip-options
inspect tftp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:bcdf7281cbf323ff6af7457149529a5b
: end
RitterBars# sh isa sa
IKEv1 SAs:
Active SA: 2
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 2
1 IKE Peer: 67.231.37.45
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
2 IKE Peer: 67.231.37.42
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
There are no IKEv2 SAs
RitterBars# sh ipsec sa
interface: outside
Crypto map tag: samap, seq num: 1, local addr: 96.43.41.168
access-list VPN2LAB extended permit ip 192.168.1.0 255.255.255.0 192.168.85.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.85.0/255.255.255.0/0/0)
current_peer: 67.231.37.42
#pkts encaps: 4, #pkts encrypt: 4, #pkts digest: 4
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 4, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 96.43.41.168/0, remote crypto endpt.: 67.231.37.42/0
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 6F98A015
current inbound spi : 6DD466F0
inbound esp sas:
spi: 0x6DD466F0 (1842636528)
transform: esp-aes-256 esp-sha-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 1122304, crypto-map: samap
sa timing: remaining key lifetime (kB/sec): (4374000/28182)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
outbound esp sas:
spi: 0x6F98A015 (1872273429)
transform: esp-aes-256 esp-sha-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 1122304, crypto-map: samap
sa timing: remaining key lifetime (kB/sec): (4373999/28182)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Crypto map tag: samap, seq num: 2, local addr: 96.43.41.168
access-list Barracudalab extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.3.0/255.255.255.0/0/0)
current_peer: 67.231.37.45
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 96.43.41.168/0, remote crypto endpt.: 67.231.37.45/0
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: 51AF17EA
current inbound spi : 859BC586
inbound esp sas:
spi: 0x859BC586 (2241578374)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 1118208, crypto-map: samap
sa timing: remaining key lifetime (sec): 28152
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
outbound esp sas:
spi: 0x51AF17EA (1370429418)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 1118208, crypto-map: samap
sa timing: remaining key lifetime (sec): 28152
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
RitterBars# sh nat int inside
Manual NAT Policies (Section 1)
1 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.9.0 obj-192.168.9.0 no-proxy-arp
translate_hits = 0, untranslate_hits = 0
2 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.85.0 obj-192.168.85.0 no-proxy-arp
translate_hits = 18, untranslate_hits = 0
3 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-10.200.1.0 obj-10.200.1.0 no-proxy-arp
translate_hits = 0, untranslate_hits = 0
4 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
translate_hits = 0, untranslate_hits = 0
5 (inside) to (outside) source static obj-192.168.1.2 interface service obj-tcp-source-eq-22 obj-tcp-source-eq-5922
translate_hits = 0, untranslate_hits = 0
6 (inside) to (outside) source static obj-192.168.1.10 interface service obj-tcp-source-eq-5125 obj-tcp-source-eq-5125
translate_hits = 0, untranslate_hits = 9094
7 (inside) to (outside) source static obj-192.168.1.10 interface service obj-tcp-source-eq-80 obj-tcp-source-eq-80
translate_hits = 0, untranslate_hits = 126
8 (inside) to (outside) source static obj-192.168.1.119 interface service obj-udp-source-eq-69 obj-udp-source-eq-69
translate_hits = 0, untranslate_hits = 0
9 (inside) to (outside) source static obj-192.168.1.51 interface service obj-tcp-source-eq-443 obj-tcp-source-eq-5980
translate_hits = 0, untranslate_hits = 195
10 (inside) to (outside) source static obj-192.168.1.114 obj-96.43.39.27
translate_hits = 0, untranslate_hits = 0
11 (inside) to (CoreNetwork) source dynamic obj-192.168.1.0 interface destination static obj-216.163.29.244 obj-216.163.29.244
translate_hits = 107, untranslate_hits = 0
12 (inside) to (outside) source dynamic Inside interface
translate_hits = 35387, untranslate_hits = 2940
Manual NAT Policies (Section 3)
1 (inside) to (outside) source dynamic any interface
translate_hits = 291, untranslate_hits = 78I just recently got the triple play package from verizon with fios too. And of course the Actiontec is total crap. The very first night it rebooted over and over again. What good is an internet connection you can't use right... Anyways, I have a cisco 831 that i use for a VPN to work, and so, I decided to put that up front.
Anyways, had the same problem. First I setup my router to bridge the connetion from the Actiontec to my router. So it goes Broadband Moca -> Actiontec LAN -(eth cable)-> Cisco WAN port. This worked great, except now my vod didn't work. So then I found this article....
http://www.dslreports.com/forum/r19559467-How-To-MI424WR-Network-Bridge-working-FIOS-TV
It was genius, add a second bridge from the Cisco LAN -(eth cable)-> Actiontec WAN -> local Moca. And then put DHCP relay on the bridge. Everything worked again, hooray. then I added an access list, and there went my vod again.
So then I spent about two hours turning ports on and off and such, finally I figured it out. You'll need to allow inbound established tcp connections that internal hosts create. This will get back your guide and allow the vod menu to work again. then you have to allow inbound connections on udp port 21310. I applied it and lo and behold vod is back. Now my only problem is that the 831 only has a 10 Mb/s ethernet WAN, so I can't get HD VOD but ah well. I'll upgrade one of these days to an 851 or 871.
Here's what the access lists should look like in IOS:
permit tcp any host (your external IP address) established
permit udp any host (your external IP address) eq 21310
probably is going to be a little bit different since you have an ASA but I think you get the idea.
Maybe you are looking for
-
Pricing can not be updated in ME22N
I have created PO which is having pricing procedure consisting different condition type. When i create any subsequent document (MIGO or MIRO) and realized that condition value in the pricing need to be changed so I have reversed all subsequent docume
-
How do I reset my password on my MacBook pro login
I forgot my login password to my macbookpro laptop and I'm trying to retrieve the old password or make a new password so I can login and use my computer
-
When I email a newsletter as a pdf, the links don't work
I am creating a newsletter that I want to email out and I have some text linking to webpages. However, when I send it as a pdf, the links don't work. Do I need to send it as a Word document? I don't want to have to send a document that large. Is ther
-
Need to find out the hierarchy information of a particular Menu
I have written a query using "select ... start with initial-condition connect by recurse-condition" syntax to get the Hierarchical information for a prticular menu. select count(SUB_MENU_ID) from FND_MENU_ENTRIES_VL start with MENU_ID = 76580 and SUB
-
JBO-25002: Definition ApplicationModule not found
Hi We are adding changing a text into LOV, we have created custom view object and custom AM. Every thing working fine on local Jdev but when copied to server we are getting JBO-25002: Definition xxx.oracle.apps.xxort.oie.server.xxxExpenseCustomAM App