Radio(FM) sound is too low comapred to music playe...

hi
have anybody has ame problem..
"Radio(FM) sound is too low comapred to music played on phone"
the phone has strong speakers which which are loud enough but when you play Radio(FM) the volume is too low.
any suggestions on this

I`m totally agree with you kklot, volume level of 5530 xpressMUSIC (?) is a shame ... despite the terrible quality earphones provided with this model.
I feel cheated by nokia, i bought an XPRESS MUSIC because of my great love for music ... but i cant access my music from earphones, cant rewind or change a song .. (!)
I really hope Nokia release a firmware improving
* a higher volume level .........  ---->  URGENT ....!!!
* bugs related to listening music meanwhile you try to do basics like answering a call !!
why the phone has to freeze or restart??
I had always used Samsung, ok, no symbian but great, powerful and rich sound.. 
i`m regreting right now about this nokia cell ....
...by the way, i cant access youyube, maybe someone can help me? is it possible? i didnt find any app for 5530.

Similar Messages

  • Sometimes sound is too low

    I watch on line movies and sometimes sound is too low & I can't  get it higher using build in tools. Is there any tricky way to manage sound? I use built in sound speakers on iMac. Os x 10.6.7

    no ideas? Please, there must be a way to strengthen a sound level if a source too low....

  • HT1657 I downloaded a movie and it plays without sound.  All other videos and music play fine.  I down loaded it 2x and it still doesn't work.

    I downloaded a movie and it plays without sound.  All other videos and music play fine.  I down loaded it 2x and it still doesn't work.

    Hi, thank you for your consern,
    I have Window Vista...Im not to computer friendly when it comes to deep details about the systems so I dont really know if its 32 or 64 bit but I did see that it is 919 bytes.
    I WAS able to see the videos before the upgrade and the flash animation does NOT rotate in red F.

  • Sound Recorded Too Low

    Hoping someone can help!
    On my recent shoot, the recording volume settings were too low (I think) and after capturing to FCP the average reading is around -50 and peaking at -12.
    Even upping the sound bar by the max 12dB isn't enough really to repair it. I'm a pretty basic user of FCP so don't know a lot of the technical stuff. I have Soundtrack Pro and don't know if that can help me as I don't know how to use it.
    Any help would be hugely appreciated folks as stand to lose an awful lot of material..
    Thanks!

    The quick solution is to double your audio tracks
    The quickest way to do that is to hold down the Option key while dragging the audio clip to a new track ... before releasing the clip, press the Shift key (while still holding down the Option key). This will create a duplicate clip in perfect sync with the original clip.
    You can also use the Dynamic Processor filter to add more gain.
    -DH

  • Sound system too low!

    After upgrading to Mavericks, all sound system are too low. I can't hear a thing if my volume is at 4 or 5 block, especially on Messages.
    On Mountain Lion I don't had this problem. There is any way to fix that?

    Since your PowerBook has a Line-In I'd suggest a better solution than an iMic would be a small mixer like the Behringer UB502 Eurorack Mixer for about $30. It will give you a lot more control over the levels.
    --HangTime [Will Compute for Food] B-|>
    Note: I am an Amazon Associate, if you purchase this item via my link I will get a small commission)

  • Sound is too low

    The sound on my mac is too low.  I have the settings as high as they will go.  Any suggestions?

    Hi,
    One thing can help is the following.  Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Portege R500 audio problem: sound volume too low

    The sound volume on my R500 is ridiculously low. Only with volume maxed out (100) and using headphones do I hear anything at all, and even then it's way too low to be useful. I can just make out the test sounds in the left and then right earphone when using the test sound found at Control Panel -> Sound -> Speakers (there are no Headphones to be selected) -> Properties -> Advanced -> Test. Unplugging the headphones I hear nothing from the speakers, due to the (very low) sounds made by the fan and HDD. Playing music (with headphones) I can just make out that sounds are being produced, but I can't even make out what is playing.
    I've tested the things mentioned in the "Satellite 5105-S901 Sound is very low (even on max volume) using supplied Toshiba driver" thread with no success (including Loudness Equalization).
    I'm running Vista Business 32bit, and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe, and Vista_Win7_R243_x86.exe driver files, and also used the  util_mute_off_25847B.exe utility.
    Enabling mute makes the already faint sounds go completely silent, so I don't think it's a mute issue.
    Jack detection does work, I can see that in the Realtek HD Audio Manager program. Using that program's sound test (Speaker Configuration) I have to go to a completely silent room, and even then I only hear something in the right earphone. (I think; it's so darn low I could be imagining I hear it.)
    Does anyone have any ideas what I can try next? I can boot to XP or Linux if anyone has any ideas on how to get sound there, just to get started. (They're silent as well, I haven't done as extensive testing under those as under Vista.)

    Update:
    Tried increasing the volume in control panel -> Realtek HD audio manager. No success.
    I have used a bunch of different drivers, both from toshiba's website and realtek's.
    Recently did a fresh XP install on another hard drive (don't have Vista install media), tried both 5.10.0.5869 and 5.10.0.6066 drivers (5.10.0.6066 is from march 13, 2010), sound still as low no matter what I do.
    Did the really desperate thing: bought a new (used) sound module on ebay ("Toshiba Portege R500 (PPR50E-00L048EN) USB jack" on ebay.co.uk), but it has the same problem as the original one.
    I was thinking perhaps the sound module doesn't get enough power from the motherboard, but since there is some sound (although very low), the USB jack on the module works, the headphone/mic jack detection works, and the diagnostics found in the Control Panel all say that the device is working OK, I don't think it's a hardware problem.
    I'm guessing there is a problem with the drivers initializing the sound to a ridiculously low setting, and increasing the volume level to 100 makes it go up to a level equal to perhaps 2 in a regular system. That should be solved by a fresh install, but it isn't.
    Perhaps the BIOS messes up the sound? But re-flashing the BIOS doesn't help...
    Anyone got any other ideas?
    I've googled and found people having problems with low sound volume on other laptops using the ALC262 chip, but no general solution.

  • IdeaCentre B520 - sound recording too low, sound on Skype too low

    Hi
    When I speak on Skype or use Sound Recorder to record my voice (using internal microphone), the sound is very low.
    I think I have turned up every possible Microphone and Audio setting on the system to its highest.
    My IdeaCentre B520 is very new and I haven't installed anything else on it other than Skype.
    OS is Windows 7 x64.
    I used the Lenovo automatic check for drivers and it said all drivers up to date.
    I haven't had a system with an internal microphone before, I literally just talk (loudly) at the monitor, I presume there isn't anything else I need to do?!
    Thanks for any help you can give with this frustrating problem!
    Patricia

    Hello Patricia,
    This is not good to know that you are encountering the issue with your new desktop.
    Please make sure that the Audio driver version is 6.0.1.6294, if it is not then you may download it from the mentioned below web link.
    http://consumersupport.lenovo.com/ie/en/DriversDow​nloads/drivers_show_4706.html
    If the version of the driver is same then you can try the settings.
    1. Right-click the icon of the speakers icon at the notification area, and then click “Sounds
    2. Click the tab “Recording”, and then click “Microphone” à select “Properties”.
    3. Select the tab “Listen”, and then check “Listen to this device”. Apply it, and the function will be enabled.
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • The sound is too low on my persario cq61-400 series

    hd sound does not work rite

    Hi,
    One thing that can sometimes help is the following.  Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Any One please help me after instaling windows 8.1 in My VAIO SVF15213SN sounds get too low ,

    Hello Nish09,
    Thanks for the post. Kindly visit  http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific to know more about contacting the nearest Sony offices in your region for further assistance. 
    Regards,
    Yuri

    I have just found the solution to this problem after months of troubleshooting. Go to the realtek website and install the latest sound kodek package and you get the sound effects back and normal volume again. Click the Volume evening field in sound effect menu

  • ITunes on iMac Sound Suddenly Too Low

    After going away from my iMac, first stopping the song playback, all of a sudden the volume can't go very high.  Full volume is about medium from before.  Not sure what happened - no one at the computer while I was gone.

    Nevermind - I figured it out!

  • In my hp pavilion dv6 laptop sound is coming less. Right inbuilt speaker sound is too low.

    My Product Details:
     Product Name: HP pavilion dv6 Notebook PC
    Product Number: QJ912AV#ABA
    OS Installed: Windows 7 64 bit

    Hi,
    Check the audio balance. More details in the link below:
    How To Adjust Audio Balance In Windows 7
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Can't play sounds on videos when using 'Facebook', music plays

    On my wife's iPad she cannot hear sound from video clips when in 'Facebook', but she can hear sound when she opens iTunes.  Any help, suggestions?

    Sorry I don't. It just happens at random and usually most YouTube videos and other similar styled videos. I'm not really a tech guy but it just seems like there is something else going on. Everything else on my PC works fine except when I want to open a video using flash. It isn't just one site or one video it is nearly every flash video and it's almost like they're loading one at a time except in no order if there is more than one tab. Even if it is just one video, it takes a long time to load.
    Imagine going to YouTube to load up a vid and the controls or progrss bar never load, it just stops and only a solid black box is displayed. Eventually the controls load and it seems like it's about to play at any moment.. only the waiting lasts 5 minutes. Even if you refresh it still has to do this all over again.

  • Audiobooks stop playing and start repeating a sound (like a broken record). Music plays as it should. Any suggestions?

    Audiobooks (from Audible) play until the later chapters in the books. Then, it stops playing, and sounds like a broken record stuck on one sound. I've tried re-syncing. I've restored factory settings and I've deleted the book from the library and reloaded it into iTunes. Any suggestions? It's happened with more than one book.

    I have the same issue and went to the genius bar. They tried something in iTunes but it didn't work. So they proposed me to leave them my computer for a few days so that they can figure out what this is. Unfortunately I cannot do that right now.
    I am really interested in a solution
    Xavier

  • Videos sound is slower than video but music plays fine??????

    help

    stream or sync ?
    the rented i'd asume stream
    if the problem is present both places i'd suspect 2½ things
    1. if your hd is more then 75% full all hd struggle clear some space
    2. if your hd becomes fragmented it struggle try a return to factory setup and resync
    2½. if your atv becomes too hot it slows down and playing video cause more heat them music and require more of the speed the heat may have removed by slowering down to cool off

Maybe you are looking for