Radio freqency id or ert id

We have the industry solution for utility (IS-U or CCS).
We are looking at implementing meters with radio frequency id's (the business people tell me these are sometimes called ERT ID's).
Each register on a single device could have it's own radio frequency id.
The question is - we cannot find a place to store them inside SAP without creating our own custom field. Has anyone done this and where have you stored the id?
Thanks.
Scott Overmeyer
[email protected]

My friend...I don't know about ERT but ya RFID is the general terminology used and is a standard...third party tool involvement is there but when you are configuring the Tag Reader with SAP...Tag readers like from ZEBRA and many more are there in the market..SAP has in build functionality available for this in the "AUTO ID" option in IMG,. i don't know your requiremenet whether Custom fields has to be created or not...best option is to contact the Technical Person(ABAPer) for using this feature.
Note: If you want to read about RFID.....what it is all about..then provide your mail ID..and i'll send you the document.
Reward Points if it helps,
Regards,
N
Message was edited by:
Nitesh Nagpal

Similar Messages

Picking up radio freqency and static when recording

Every time I go to record a live instrument I pick up a radio frequency. Might be a grounding problem, might be where I live, etc. Does anyone have any solutions that I could try to get rid of this?

What kind of live instrument?
I'm guessing here, but it sounds like a guitar with single-coil pickups. Sometimes simply changing position in the room can improve things. In my band's rehearsal space (playing a Strat with single-coil pickups), it makes a huge difference just rotating my body a few degrees.
Anyway, this is just a guess.

Tv losing channels when vision box turned on

When vision box is turned on I lose channels - film4 and radio channels and screen pixelates on others. Not actually watching channels through box, just on tv. Screen says no signal. As soon as box turned off signal returns. When scanning for channels vision box cannot find these channels. Any help gratefully received.

This is nearly always HDMI interference. I get this on 666MHz which for me is Pick TV and a few others.
Basically the HDMI interface generates Radio Freqency interference - it is a by-product of the high bandwidth required to send the full HD signal from the box to whatever. This RFI then leaks out of the cable (even the expensive 'shielded' ones) and will often cause 'damage' to the signal being received down your el-cheapo TV aerial cable into the TV tuner. It will peak at certain frequencies and this is why not every channel is affected.
I have found the only way to (partially) cure the issue with my setup is to install clip-on ferrite cores (the bug ones) onto every HDMI cable and wind the cable at least once through the centre of the ferrite. I say only partially cure as if the signal level of the MUX on 666MHz drops OR there is other noise, then the HDMI interference will knock out that MUX.
Another fix is to ensure that your HDMI cables are kept as far away from your TV aerial connection(s) and any amplifiers as is possible, even if it means using a longer cable with a less direct route from box to TV. Don't bunch or wrap all the cables together, and don't be fooled into paying a kings ransom for HDMI cables. Many have found the cheaper cables generate less RFI for some reason.

Best practice identifying ERT modules with SAP / IS-Utilities

Hi everybody,
I'm looking for the best practice identifying ERT modules with SAP / IS-Utilities (electricity).
Here's the physical device set up :
The ERT modules are internal to the electricity meter. They're integrated into a multi purpose electronic circuit. So they can't be remove physically as a separate device.
The ERT modules are used to transmit data from the meter to a radio frequency receiver (handheld or drive-by). The main data that is transmitted is the consumption reading. So the receiver stores the ERT module number and the reading value.
They may be one or more ERT modules in a single meter, and each ERT module transmit his own specific consumption reading (energy reading, demand reading, etc...).
Each ERT module has is own manufacturer number.
My issue is :
To find a way to identify in IS-U the ERT module within the meter's register group (or somewhere else???) in order to relate each register to his ERT module number.
The purpose of all this is to create reading orders with the ERT module number following for each register.
This way we can match, using a unique key, each reading order and his corresponding reading value uploaded from the radio frequency receiver (handheld or drive-by).
Thanks for your help and ideas on best practice.

Hi,
1) The system (application) environment of BI (what is integrated in it - e. g. within the portal, there is a storage for unstructured information like documents or virtual rooms for collaboration between departments - and what does it make)
Document management from RSA1 transaction of BI helps to attach any unstructured documents at specific level in BI.
2) How does development in BI works (development environment, coding, debugging, building, deployment and test) and what is used stronger (ABAP or ABAP OO)? Here, I don't mean how to write ABAP or ABAP OO programs, only the infrastructure from development to transport to a target system
BI has got a separate tool and GUI to perform all the Extract, Transform and load related activities. ABAP is part of BI but you don't need much extensive ABAP learning. Basic ABAP is sufficient to write routines and extractors.
3) How is a BI system to configure as default after installation?
May be a BASIS person can help you out here about the configuration but this is not the job of BI person.
4) Good guides (e/books) to learn ABAP and ABAP OO (as far as possible oriented on the practive)
You can search for SAM Series learn ABAP in 24 days book. This book is sufficient to learn the ABAP required for working in BI.
But except ABAP you will have to completly learn the BI system to work efficiently.
Regards,
Durgesh.

HT201272 I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else.

I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else. My phone is not syncing properly, I wanted to add another playlist to it that I created on my Mac. I pluged in my phone and made sure the playlist I wanted to add was checked to be on my phone when I synced.
The playlist I wanted to add was "Country." It is clearly checked. I also wanted to add the "Recently Added" playlist, which I also checked before sycing. Currently, my phone only has the "Purchased" playlist and my "All Songs" playlist on it. When I hit sync, iTunes added another playlist automatically added another playlist to the list above and checked it. It was titled "ALL SONGS 1" and had ten fewer songs in it than the playlist I had created, "ALL SONGS" had. This playlist, however does not show up on my phone after syncing, nor does "Country" or "Recently Added." (Every time I sync, another playlist is created as "ALL SONGS 2, 3, 4, etc.") One of the songs (I have not, yet checked the other songs) that I purchased from within iTunes Radio shows up in the "ALL SONGS 1" on this screen:
But does not show up anywhere else. This playlist does not show up anywhere but the two screens above. The ALL SONGS 1 or 2 playlists do not show up here:
When I search for those song in my library, it shows that I do not have them:
But if I go to the iTunes store, I get the play button and not the price of the song:
This is what things look like from my phone's side of things:
"Summertime Sadness," one of the songs I bought from iTunes Radio, does not show up in the iTunes store under purchased "All" or "Not on This iPhone"
But, it does show up under "Recent Purchases"
Also, this is what playlists are on my phone after syncing a million times:
Only what was on there before I started any of this. "Summertime Sadness" and the other songs I bought from inside iTunes Radio, do not show up in either of these playlists. Please, help me.

Hi Petrafin,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
You can download your purchases directly to your computer.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Cheers,
- Judy

Follow up on JB versionJRO03O and radios i515.10 vFF02/ I515. FG02

JB versionJRO03O and radios i515.10 vFF02/ I515. FG02
The developers i know who have been using this versionof JB and new radios report everything seems to be working great no lost signal or dropped calls
looks to be ready for primetime now we need verzion to push to all . But i suspect S3 will gt JB first
This is an official OTA but only released to those who had 76Q ICS.
With a little research you will see how well it works

Android police is where I have found most with links to the needed
software.
On Sep 6, 2012 9:00 PM, "mariomerendino" <[email protected]>

Photosmart c309a- 'The wireless radio is not functioning, contact HP support'

My Photosmart c309a wont connect wirelessly. Upon running the wireless network test, the report states, and I quote "The wireless radio is not functioning. Contact HP support". The report then states the following:
Wireless on PASS
Wireless working FAIL
and everything following that stated as 'not run'.
Ive searched for other threads on the subject, and the only sloutions I can find are unplug the printer and plug it back in to reset it (made no difference), and try the HP print and san doctor (link was dead, found it manually and didnt work as it cant connect to or even see the printer on the network).
So the question is, is this a hardware fault, and if so what can be done about it?

Hello,
Yes, it is an hardware issue and indicates that the Wireless card is not functional.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the white star under my name.
Click "Accept as Solution" if it solved your problem, so others can find it.
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

How to use my iPhone 4 to select Internet radio stations on MacBook Pro

Okay, once again I return here to seek guidance and wisdom. Fellow members here told me about Air Video, a terrific set of programs for iOS and OS X to stream videos from my MacBook Pro to my iPhone 4. It is awesome!
Now, my other need (?). I want to run something on my Mac that lets me select Internet radio station streams like TuneIn for ex., but I want to be able to change selections on whatever is on the Mac from the iPhone 4. What I want to do is use the iPhone 4 as a remote for the app on the Mac which I want to connect to either some external speakers or someday to a real external Dac, amp, and speakers.
I have the TuneIn Pro app on my iPhone 4 already and on the Mac via browser have accessed their website.
Now someone surely is going to mention Airplay or something to stream from the iPhone4. From the cost of Airplay capable hardware, I just can't afford it yet. Maybe if I could find Bluetooth speaker or device?
One other thing to throw in for thought. I have not only iTunes on my MacBook Pro, but also Fidelia and Amarra, and thinking about Decibel or Audirvana. In other words somewhat hi-def music output quality available on the Mac. So....I do have a remote app for Fidelia and think there's one for either Decibel or Audirvana, so that brings me back to Internet radio on the MacBook Pro. If I can find a way to use the iPhone 4 to select an app on the Mac for Internet radio, I can play those plus hi-def music via one of those programs.
I probably didn't say all that right, but I hope you can decipher what I am asking about.
If nothing else, can you recommend inexpensive Bluetooth speakers to play radio from the iPhone4? I was hoping to buy some AudioEngine powered speakers for the Mac, hence the desire to run all sound/music through that device but using the iPhone4 as control device.

Hi Starbux48
First off. The benefits of using Amarra, Pure Music, Audirvana or whatever, can only be heard if you have a true audiophile system set-up. Think of systems starting from 5000 U$. Then only if your music files are high resolution. Think ALAC or FLAC, AIFF or Wave. For all other music playing the itunes set-up suffices. So the better idea for you will be playing the music over your macbook.
Mountain lion offers airplay for intel based macs. You can use this. If you install the free Remote App. on your iPhone, you can use that to control itunes on your Macbook via wifi/Airplay. The remote app offers you the view of itunes on your Macbook and the screen of your Macbook changes with what you do on your iPhone. So you can even control the itunes radiostation from your iPhone.
If you have an older, non-intel macbook, you can install airserver on your macbook. This will set you back 15 dollars or so, but will basically do the same.

Using a Radio Button to Disable Multiple Checkboxes

Hi everyone,
My name is Christian and I am trying to design a form using Adobe Designer 7 that when a user selects a group of two radio buttons (one marked Macintosh and one marked Windows) it automatically disables 3 or 4 checkboxes of various software applications further down the page.
The idea is if you select the Windows radio button, you would not be able to select the iWorks or StuffIT checkboxes (as that is Mac software), but conversely if you check Macintosh radio button the iWorks and StuffIT checkboxes activate but the Office 2003 and Microsoft Money checkboxes deactivate (because that is Windows software).
Im not really a developer so any assistance would be appreciated. Thanks for reading and have a great day! :-)
Christian

I suspect that you have a problem in some portion of your code that you have not posted. To help debugging I suggest you create a simple test using two pages: input.cfm and action.cfm. Get the most simple case working then add the javascript, css, and CF code to make your application work.

<html>
<head>
     <title>Input</title>
</head>
<body>
     <form action="action.cfm" method="POST">
          Choose type: <br />
          <input name="type" type="radio" value="male" />     Male<br />
          <input name="type" type="radio" value="female" /> Female<br />
          <input type="submit" />
     </form>
</body>
</html>

<html>
<head>
     <title>Action</title>
</head>
<body>
     <cfif form.type eq "male">
          Type is male.
     <cfelseif form.type eq "female">
          Type is female.
     </cfif>
     Here is a cfdump of the form variables:<br />
     <cfdump var="#form#" />
</body>
</html>
Message was edited by: JR "Bob" Dobbs
Added sample for action.cfm

Is there a way that iTunes can act as a Radio Alarm Clock? I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on and start playing that Radio Station from Sleep mode at spec

Is there a way that iTunes can act as a Radio Alarm Clock?
I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on from Sleep mode and start playing that Radio Station at specific times of the day?
Any App or plug-in that does that?
Many thanks
Kevin

Turning your Mac into a clock radio.
1. In iTunes create a playlist that contains just the radio station you want to wake up to.
2. Export the playlist (as .m3u works well). Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
3. In iCal create an event entry at the time you want to wake up.
4. Right (or Control) click on your wakeup event and select Get Info.
5. For "alarm" select Open File.
6. Now under Open File there will be a place to add the file to open. It will probably be some default entry (like iCal). Click on it will allow you to select "other." Then use the file dialog to select your playlist file.
Your Mac will wake you up at the appointed time. You don't need to keep iCal running. If you want to put you Mac to sleep for the night then there is one more thing you need to do. Open System Preferences to Energy Saver and click on the Schedule button. Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
Dan

Is there a way to play two radios at once?

I usually listen to music using the Songza, Pandora, or iHeart Radio app. Recently I started listening to a news talk radio through the iHeart Radio app. I want to continue listening to the news talk shows, but I'd like to listen to music in the background. Is it at all possible to have two radio apps playing at the same time?

Another option is to make a smart album with the criteria: Album is XXXX and Album is YYYY. Rather awkward but would work.
OT

HT5848 I do not have the tab for iTunes Radio on my phone or either of my iPads. After the original update it appeared on my mini iPad and my phone but not the iPad 2. After the most recent update it is no longer on the phone or mini. How can I restore th

Am I the only person having this problem? When I ask Siri to open iTunes Radio the last station I used comes up but I cannot open iTunes Radio.

The App icon for iTunes and Music look virtually the same, so are you looking in iTunes or Music. iTunes Radio is in Music.

ITunes no longer connects to many of the radio stations that it used to

I recently patched the new upgrade version of iTunes. I decided to wait this long so they could work out some of the bugs first. Apparently it still has some. And this post applys to both the Mac and Windows versions.
I used to enjoy listening to the di.fm Chillout station in the Ambient section of iTunes. After I patch this new upgraded version of iTunes it will no longer connect to the station. This by no means is hindering me from listening to my station, but it is taking away the convenience of doing it all through iTunes. The new version also cut off many other radio stations as well (unable to connect).
Andbody have a clue if Apple is ever going to fix this?

Some things to try:
• try connecting via ethernet
• turn Airport off and then back on, or go to System Preferences -> Network and select Renew DHCP Lease
• from System Preferences, create a new network location
• turn the router and/ or modem off, wait 15 seconds, turn them back on again
• zap the PRAM:
http://support.apple.com/kb/HT1379
• check and possibly adjust the security settings on the router
See if any of those work for you.

Read Only Display of Radio group and Text area with counter not working

Hello,
I am using Apex 3.2, with 10g for the database
I have this form, with fields that will set to read only when status = 'closed'
All of the fields display as read only except for 2. I cannot figure out why this is not working correctly.
1st field is Issues that is a text area with character counter, with a sql query behind it, that is set to null unless the query is pulling in the data.
2nd field is Status which is a radio group that will not display as read only when status = 'closed'
I have other fields on the form with the same format and they change to read only when the status = 'closed', I have even copied the pl/sql expression from one field to these fields and it still doesn't work correctly. I have also tried javascript for an on load event, which works, but once I click on the save button, it disables all of the page items, which works correctly, but I purposely forget to enter information, to make sure the validations are firing correctly, which it does, but the script disables everything, not allowing me to correct the errors. The javascript is firing on the on page load event.
Any help on this is greatly appreciated.
Mary

Dung,
That API seems to have a bug, it returns true/false/null, so you could use 'return not nvl(htmldb_util.current_user_in_group(p_group_name => 'APP Admin'),false)' to get a false value.
Unfortunately there's another problem: using the read-only attributes for checkbox or radiogroup item makes them hidden. My suggestion would be to create another item that has disabled="disabled" in the HTML Form Element attribute in the item definition and display that item or the non-disabled item alternately, using conditions based on the current_user_in_group logic.
Scott

Read-only radio group losing value on validation error

It took quite a while to track this down, but I think I've got it narrowed down properly. I have an APEX form for updating a record in a databse table with a radio group which is conditionally read-only. If that radio group has a value AND is read-only, when the form is submitted and hits a validation error, the value of the radio group is lost.
For example, the radio group SUBMITTED_FOR_APPROVAL is set to Y and is read-only for a given user. That user then changes something else on the form and submits it. However, the form now hits a validation error for some field. When the form reloads with the validation error displayed, all the fields are restored except the read-only radio group which is now blank. If a select list is used with the identical read-only condition, it works fine. Likewise, if a radio group is used, but the read-only condition is removed, it works fine. It is only when it is a radio group and it is read-only, that the value does not appear to be submitted to the session with all the form values whent he form is submitted.
Is this a bug or am I simply missing something?
Apex 3.1.2
Rgds/Mark M.

It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
1 Display=Yes, Return=Y
2 Display=No, Return=N
The settings in the LOV section on the item iteself:
Named LOV: LOV_YN
Display Extra values: No Dynamic translation: Not translated
Number of columns: 2 Display null: No
Null display value is blank as is null return value
Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
Rgds/Mark M.

Radio freqency id or ert id

Similar Messages

Maybe you are looking for