"Radio Off" and cannot be turned on via "Manage Connections"

Hey all, hoping someone has seen this before on the Curve.  I ran low on power and the radio shut off, but now no matter what I do that has previously worked, (Make a call/go into manage connections-"Turn on all connections") the radio won't turn on.
Any ideas or tips before I commit BlackBerrycide?
Solved!
Go to Solution.

That happened to me before too when the battery ran real low and I wasn't able to turn it on until the battery was over 25%.  Have you charged the phone?
~Lorrie~ Master of All Things Blackberry!

Similar Messages

  • M93p dual monitor problems; monitor turns off and cannot be turned on again

    Hi,
    we have multiple M93p tiny computers causing problems in dual monitor setup (VGA / Displayport->DVI). Our users (already >5)  keep telling us, they leave their workplace, return, then DVI attached monitor if off and they do not find a way to turn it on. This is true; the only workaround that has been found by our users is to bring Win7/32bit into standby mode and awaking it again.
    Needless to say, we turned all windows energy saving options off (computer standby/hibernate, monitor turn off). Still the problem appears.
    Maybe there is something wrong with DVI power/DVI signal?
    - Monitor independent, as far as I can see
    - Independent from Windows energy saving modes
    - BIOS updates did not help
    [todo]: Try Intel/(AMD?) drivers, let users test.
    I haven't seen exactly when the monitor turns off because it is reported by users. I had a testing machine, but was not able to reproduce.
    http://forums.lenovo.com/t5/A-M-and-Edge-Series-Th​inkCentre/Dual-monitors-problem-VGA-and-Displaypor​... is related.
    Anyone?
    Thx

    Make a "Genius" appointment at an Apple Store to have the machine tested.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • My iphone keeps shutting off and won't turn on until i connect it. the battery is charged

    Has anyone had this problem.  My battery is charged, but the phone turns off.

    I RECENTLY purchased a new iPhone & I'm having this problem and they sent me a new phone...supposedly...but I'm still having the same problem. What happened with yours? Did you get it fixed or what?

  • HT5278 Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my opti

    Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my options?

    Thanks to everyone who responded and related subject helped. Holding the home button and power button simultaneously for 10-15 seconds does unlock the screen. I can now use my ipad again. However, a futher problem has arisen since updating to IOS6 and activating icloud at same time, Although not sure if its related. The problem is that when connected to my PC the itunes message appears 'Cannot read ipad'. It instructs you to restore but keeps timing out after about 1 hour. This maybe internet issue but can't understand why itunes cannot read my ipad. May need to completely erase all content & reset. Or any other suggestions why this has happened?

  • HT201401 cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?

    cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?

    Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider.

  • HT1695 I powered my iPad off and when I turned it back on it is telling me to configure it so I select English then select United States then my WiFi selection comes up and I select that then get this message...your iPad could not be activated because the

    I powered my iPad off and when I turned it back on it is telling me to reconfigure it. So I select English then United States then I selected my WiFi then message comes up that says your iPad could not be activated because the activation server cannot be reached. Try connecting your iPad to iTunes to activate it, or try again in a couple of minutes. Have tried several times and it is still not working. Nothing will show on screen on icons nothing.

    Try to Update your iPad to iOS 6.1.4 when connected to iTunes via USB too.. You do not need to touch anything on your iPad to update your iPad either..

  • I downloaded iOS 8.2 and now my phone won't connect to the iTunes store, and my iTunes Match is turned off and won't turn back on...

    I downloaded iOS 8.2 on my iPhone 5s 32 GB and now my phone won't connect to the iTunes store, and my iTunes Match is turned off and won't turn back on... I'm trying to log in from Settings > iTunes & App Store... not working...  I have reset the phone twice, tried via cell service, and rebooted my wireless router..

    As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
    https://www.apple.com/support/systemstatus/
    Edit

  • The iPhone I got yesterday turned off and will not turn back on.

    The iPhone I got yesterday turned off and will not turn back on.

    Is it charged? If so try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.  If it's not charged, charge it via a wall socket for a least 30 minutes then try the reset again.

  • TS1702 I updated my phone to OS6. It worked fine for a few hours, has now turned it self of and cannot be turned on again. How to fix this?

    I updated my phone to OS6. It worked fine for a few hours, has now turned it self of and cannot be turned on again. How to fix this?

    Try resetting your iPhone ... but first, make sure it has a well charged battery!
    Hold the on/off and home buttons together for 6 or 7 seconds until the Apple logo appears.

  • HT201365 my iphone4 suddenly went off and whe i turned it off and back on its asking me to activate my phone but iam unable to activate my iphone. its showing me as activation error

    my iphone4 suddenly went off and whe i turned it off and back on its asking me to activate my phone but iam unable to activate my iphone. its showing me as activation error

    Is your iPhone a Factory Unlocked iPhone or Locked to a Service Provider ?
    Have you tried Restoring your iPhone by taking your device in Recovery Mode ?
    You can Contact Apple Support Team via Chat Support or you can call their Support Number.

  • My iphone has suddenly turned off and won't turn back on

    This is a replacement phone as mine broke after updating I've only had it 3 months and now it's suddenly gone off and won't turn on I've tried the reset but it's totally blank if I return to the shop will I be made to pay again for a replacement??

    You say your tried a reset, holding the sleep/wake and home buttons until you see the Apple logo? How long did you hold the buttons, it could take up to 30 seconds of holding for it to work. If this doesn't do it, then plug the device into the charger for a minimum of 30 minutes, then try the reset again. If you still cannot reset the device, make an appointment for the Genius Bar. Paying for a replacement depends on the warranty status of that device.
    If your other device was under warranty, the replacement would have a warranty of 90 days or the balance of the original phone warranty, whichever is the longest.

  • Wifi turns off and mobile data turns by itself.

    Like I said, Wifi turns off and mobile data turns on by it self. I have actually see it do this while I am using it. I am getting sick of having to back into setting to turn mobile data off and wifi back on. My phone started doing this a couple months ago and is doing it more and more frequently wasting all my mobile data. I have had the phone a little over a year. I'm not sure much can be solved in the forums but I also don't know how to contact Blackberry Support as they seem to just direct people here. Any help with this would be appreciated.

    Oh wow...that's a really ancient OS. There was one more in the 10.2.1 branch after that, then the entire 10.2.2 branch, followed by 10.3.0, 10.3.1, and now 10.3.2...so you are perhaps 25, maybe 50 updates behind now? Not surprising that you are suffering from problems that have likely been cleared up since. I cannot recall specifically if the problem you are reporting was in that specific OS version...it's been way too long since I used it (I'm on 10.3.2.840 now, on all 3 of my devices). Regarding the space issue, refer:Article ID: KB36394 Unable to upgrade to BlackBerry 10 OS version 10.3.1 or later due to insufficient spaceHowever, given your ancient OS, it is rather likely that you will have trouble with updating, especially in regards to backup/restore of your data. It has been reported that some who jump too far ahead find that their data cannot be restored to the updated device OS. So, to prepare, I advise you the following:Use LINK to conduct a full backup to your PCManually copy the entire contents of Device Memory to your PCPurchase and use Ultimate Backup to backup your data to your media cardPrepare full manual documentation of all configurations, account credentials, added apps, etc. (in case, in the worst case scenario, you cannot restore from backup and have to manually reconfigure everything)Hopefully this advice is way more conservative than you require...but better safe than sorry. If the official methods don't work for you, then you can consider the unofficial AutoLoader method (which, given your ancient OS, might actually be a "cleaner" way for you to go, but will require backup/restore or manual reconfiguration as AutoLoaders are completely destructive to everything presently on the device):http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using-Autoloader/td-p/2466747#nobannerhttp://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/You will want to research carefully what OS you choose, however...be sure you choose only an officially released (by at least one carrier) version and not a true "leak". Also beware of moving into 10.3.2...the government-required "kill switch" has been added to 10.3.2, and hence also includes a block that prevents you from falling back to 10.3.1. Good luck!

  • 'HP OFficejet Pro L7680 turned itself off and won't turn back on'

    HP OFficejet Pro L7680 turned itself off and won't turn back on. 
    This question was solved.
    View Solution.

    Hello untech,
    I see that it has been awhile since you have posted with us on the HP Forums.  Please let me take a moment to say "Welcome Back". 
    I see that you are having an issue with the printer shutting it self off and not powering back on. 
    By chance do you have the printer power cable connected to a power bar/strip?  If so, please try connecting the printers power cable directly to a wall outlet.  Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    The printer in the document is a LaserJet printer but this document is meant for HP products in general and only uses the LaserJet as an example.
    I am also going to include a document for when The HP Printer Won't Turn On or Respond When the Power Button is Pressed.
    If by chance the issue is not resolved after doing the steps outlined,  I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Please feel free to write me back if you have any other questions.
    I hope you have a great Monday.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC.  I have to turn the phone off and then on again for it to connect.

    I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC.  I have to turn the phone off and then on again for it to connect.
    Why is this?  My husband's 4s is still on IOS7 and it still connects automatically.

    I do not know if this will help.
    For a limited time Apple will allow you to downgrade to 7.1.2.  Hurry do not wait.
    See brownox second post here:
    Are there known problems with hdmi screen display and iOS 8?
    and
    http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/

  • Help me! I have a new iPad mini that won't turn on. It was working fine this morning then i turn it off and it never turns back on. it doesnt register with iTunes and resetting isnt working either.

    Help me! I have a new iPad mini that won't turn on. It was working fine this morning then i turn it off and it never turns back on. it doesnt register with iTunes and resetting isnt working either. All I did is download instagram and snapchat and poof doesnt work. I have had these apps before!

    Make sure it's plugged into the charger.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

Maybe you are looking for

  • How to upload images in Internet Service object ?

    Hi, I have to upload/change the existing image in Internet Service object (Z program). The path where my current images are as follows:- SE80->Internet ServiceZ Program->Theme->MIME Object-->Images->( Here I have to uplaod the image) Please tell me h

  • KT6 Delta Rebooting Issues - Solution that Worked for me

    Hi Solution that worked for me: Enabled SATA Controller which takes a while for it to detect SATA Drive and giving time for the system to warm up.  I don't get that annoying message asking to restart Windows in safe mode, normal, & etc.   I've been h

  • Is it possible to audit newly created database user in trigger?

    All,I have statement audit on for a list of database users(not all users). i.e audit update table, insert table, delete table by user1, user2, user3, ... Now when a new database user is created, how can I add audit statement on that new user automati

  • Mac HD unmounted; Boot Camp partition still available

    Hi there, So I've seen many different threads regarding this issue, but I'm in a particular situation and I am looking for some advice. Regarding my situation, I have the problem where every time I boot my Mac, the "grey bar" loads for a bit, stops,

  • UDP ip address

    I have two ethernet PCI cards in my PC.  One of them is gigabit (Intel PRO/1000 GT) and the other one is 10 BASET.  I found a couple of functions, i.e., UDP Write and UDP Read in my Labview 6.0 which may work for my purposes.  I was able to set a uni