Radio on the curve

On my old mobile I could tune in and listen to the local radio as I walked. Is this available on the curve 8520?

You will need to upgrade the device operating system of your BlackBerry to OS7.1 for that feature.
More info here... http://blogs.blackberry.com/
When your mobile provider releases the upgrade, you can upgrade. Or there are other ways to upgrade to another provider's release if you choose to go that route.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

FM radio on 8530 curve

Hi all:
I see some of the curves with os 7.1 can have fm radio, can this also be applied to a 8530 curve???
That would be wonderful.. Thanks Jack Greer
Solved!
Go to Solution.

Hello Jack Sorry but 8530 can only be up to OS 5. Not all OS7.1 phones have the radio function tho. Just the 9380 and 9360. Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Can the Curve output the ringtones and SMS notifications to headphones or to an externally connected speaker?

Ok, here's the deal. I'm a network engineer, and my company uses a monitoring system which sends SMS text messages to pre-defined corporate cellphone numbers when something requires an engineer's attention. My problem is that I'm a VERY deep sleeper (laugh if you must; I need three separate alarms to wake up in the morning), and my current phone's speaker (a Curve 8310) is simply not loud enough to wake me up. Nor is any other phone, I would imagine. Not unless it has a 30-minute ringtone.
So my question is, can the Curve, when connected to an external speaker or a pair of headphones via 3.5mm audio cable, output its ringer or its SMS notification tones through the audio jack to the speaker/headphones in addition to (or instead of) the phone's built-in speaker?

eh, you never know... I've had people thank me PROFUSELY, before, for giving them those loud tones, but of course they tried them first
Your Alarm tone can be as long as you want... Mine repeats until I touch the screen, then I have a one minute snooze. I use a loud tone also, because most would never awaken me.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

HT1657 I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found - please help

I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found - please help

Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

Lumia 720: Mix Radio revised the Nokia Music 1 yea...

I have a Lumia 720 which lost its Nokia Music free subscription of 1 year in 6 months.
IMEI No: XXXXXXXXXXXXXXX
Contact No: XXXXXXXXXX
I would like to know the reason behind revising and free music download subscription to 6 months without any notice. When the phone was bought, free subscription was given for an year.
Moderator's Note: Personal information provided were edited out. Please do not publish any unique serial number/contact information in a public forum.

Dear Nokia, please confirm "Lumia 720: Mix Radio revised the Nokia Music 1 year free subscription to 6 month" is this quoted is true? Please Revert. My phone is just 6monts old. Now I am getting pop up "Activation Problem : .....see attachemnt" Its very disappointing and shocking that one of the encouraging features in Lumia720 (Nokia Mix Radio) suddenly stops working instead of providing service for 1 Year. Initially this sudden seizure spoiled our mental peace, forcing us to try re-installation and discussions until I read some comment in Support page. We never expect such from Nokia/Windows, at least we would have given an intimation!! A reply most appreciated. Best Regards, D_Navada

How can I stop emails pushed to the Curve from getting marked as "Read" in Outlook!

I get 100 or so emails a day, and get them bolded in Outlook until I read them. In two of my three email accounts, the emails remain bolded in Outlook even after being pushed to the Curve. In the third, which runs through my work server, all emails come in unbolded as if they're already read.
This is confusing me and making it hard to go back and pick up important emails (and delete others). Anyone got any ideas of how to fix this in my email set-up on the Curve?
Thanks much.

your other two email accounts, which type are they? MSN, Hotmail, Yahoo, or Gmail or another provider? I have one of each of these and i have mine setup as delete on mailbox and server, wireless reconcile on and on conflict mailbox wins, so when i see these emails on my computer, they are already read and if deleted( yahoo and gmail) will be deleted on the server, the msn and hotmail just stay as read but not deleted.

I am wanting to know if my blackberry curve that I no longer use could be put on a phone card plan and if the number that she has on another phone can be transfered to the curve?

I am giving my old phone the curve to a friend who wants to know if the phone can be phone card used?

Good afternoon shrimpski. What a wonderful friend you are to be giving your friend your old Blackberry Curve. I need to find some friends like you to get me out of sticky situations. Are you wondering if they can use it on a prepaid account? Depending on the make and model of the Blackberry, they may be able to activate it on a Verizon Wireless prepaid account. For more information on our prepaid options please reach out to our prepaid team at 888-294-6804.
Verizon Wireless phones can only be activated on Verizon Wireless accounts. If they are looking to use the device with a different carrier, they would want to bring it to the carrier to see if it is a device that they can activate on their network.
NickB_VZW
Follow us on Twitter @VZWSupport.

How to listen to radio when the iPod nano is docked?

On the iPod, the antenna for the radio is the cable of the earspeakers. However the earplug is on the same side as the docking plug. Is there any accesoire for that or should I make my own design?

If your docking station has a line-in input, you can get a male to male audio cable and it will act as the antenna. I just did this with my nano and it works fine. Only prob is you can't adjust the volume with your docking station remote and the vol on the nano only goes so high. Hope this helps.

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data.

I am trying to get itunes radio, but the tab is not there in music tab?

i am trying to get itunes radio, but the tab is not there in music tab?

That feature isn't available in the UK yet.
tt2

Ipad won't play itunes radio in the car, help

my ipad 3 is running IOS 7 and used to play itunes radio via the cars sound system, it doesnt play anymore. Is this due to the version of IOS?

No, it's not due to the iOS. How are you connecting the iPad to the car sound system?

I can't connect to iTune Store nor to radios, with the aid of iTune,check for updates, these last two from aid, but if you communicate with support.Please the answers in spanish.

I can't connect to iTune Store nor to radios, with the aid of iTune,check for updates, these last two from aid, but if you communicate with support.Please the answers in spanish.

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
          8.8.8.8
          8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

Cs6 , how can i add a anchor point in the curve in the channel Red or Green?

Hi
how can i add an anchor point in the curve in the Channel R / G and B?
in cs5 , with ctrl + click i was able to click on the image and add an anchor point in the curve channel RGB
and with shift +ctrl + click i was able to click on the image and add an anchor poing in the channel Red , 1 in the channel Green and 1 in the channel blue
i know cs6 doesn't have any more ctrl+mouse click , there is the targeted adjustamanent tool
i can do it with ctrl+m and call the curve
but i can't do it with curve adjustament tool
is there a way to add a anchor point in each channel red , green and blue (like the prev photoshop)?
thanks

thanks that's correct! thanks
but it's not 100% correct
to add a multiple points in rgb shift+click doesn't work!
from adobe
Keyboard shortcuts: Curves
You can use these keyboard shortcuts for Curves:
To set a point on the curve for the selected color in each color component channel (but not in the composite channel), Shift+Ctrl-click (Windows) or Shift+Command-click (Mac OS) in the image.
To select multiple points, Shift-click points on the curve. Selected points are filled with black.
To deselect all points on the curve, click in the grid, or press Ctrl‑D (Windows) or Command-D (Mac OS).
To select the next higher point on the curve, press the plus key; to select the next lowest, press the minus key.
To move selected points on the curve, press the arrow keys.
(Curves dialog box) To set a point on the curve for the current channel, Ctrl-click (Windows) or Command-click (Mac OS) in the image.
If you’re instead using the Curves adjustment, simply click in the image with the On-image adjustment tool .

How to get clipping indicator in the Curves Adjustment??

I hold down the option key while moving highlight slider to the left but no clipping indicators appears. I'm using Photoshop CS4.
What am I doing wrong??
Thanks for any help,\
Russ

Hey buddy, really appreciate your attempt to help me.
I went to IMAGE-MODE and make sure I was in RGB. Is that where i
should check? I don't know where to check to see if display is set to
Light and not Ink.
The funny thing is that when I push the Option key in Levels I get the
Clipping Indicator when I move the Highlight slider to the left, but
when I press the Option key for the Curves White Point slider, nothing
happens as I move the slider to the left.
I don't know, I have to be doing something wrong.
Any further comments would greatly appreciated,
Russ

Radio on the curve

Similar Messages

Maybe you are looking for