Radio problem (full text)

I got Nokia 6280. And I got a problem, I can't use Radio.
When I clik on Radio nothing happens. When flight mode is on and then I clik on radio it says "unabale to use when flight mode is active".
It seems that, menu>multimedia>radio option is to do nothing.
This happend after useing http://kazynetwork.webs.com/nokia6280ph.jpg as headphone and listening radio with it. When I was listening radio with http://kazynetwork.webs.com/nokia6280ph.jpg radio turned off by it self (Battary level was 70%).
After that I flashed my phone (and installed latest filmware v6.43 on it), just wanted to fix it. But its still not turning on.
My IMEI: 3XXXXX00XXXXXXX
=====================
Note: There is no Nokia Care Point in or near my area.
Note2: My phone never had a warranty. *#war0anty# - evry field is empty (even imei No).
Note3: I am Expert in computer programs.

When flight mode is on and then I clik on radio it says "unabale to use when flight mode is active"
Basically turns off all the signal to the phone while it is still on, so you can use it on a plane to listen to music etc, but you wouldnt have any reception or anything,common sense no communication at all.
the only other thing you can possibly try is a factory reset,after that a nokia care center.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Problem full-text in blob column index created using Oracle Text

Hi,
I'm running Oracle Database 10g 10.2 on solaris
I configure Oracle text if i look for in a varchar2 column is ok, but with blob column doesn't works the search.
I have a table with a blob column which contains document. I load document with Oracle UCM (stellent)
My index scripts is:
CREATE INDEX ORAUCM.FT_IDCCOLL1 ON ORAUCM.IDCCOLL1
(DDOCFULLTEXT)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS('DATASTORE CTXSYS.DEFAULT_DATASTORE FILTER CTXSYS.AUTO_FILTER FORMAT COLUMN DFULLTEXTFORMAT CHARSET
COLUMN DFULLTEXTCHARSET LEXER OCS_IDCCOLL1_LEXER SYNC (ON COMMIT)')
NOPARALLEL;
And my select retunm 0 rows although it will be many documents:
SELECT IdcColl2.dID, dDocName, dDocTitle, dDocType, dRevisionID, dSecurityGroup, dDocAuthor,
dDocAccount, dRevLabel, dFormat, dOriginalName, dExtension, dWebExtension, dInDate, dOutDate,
dPublishType, dRendition1, dRendition2, VaultFileSize, WebFileSize, URL, dFullTextFormat,
dFullTextCharset, DocMeta.*
FROM IdcColl1, DocMeta
WHERE IdcColl1.dID=DocMeta.dID AND (CONTAINS(dDocFullText,'SUBIR') > 0 )
ORDER BY dInDate Desc
Thanks in advance.

Thank you for your answer.
I response your question:
- yes DDOCFULLTEXT is a BLOB column.
- The document that word, excels, whatever. We load the document with UCM (universal Content Management)
because i need full-test search form UCM tool.
- Yes 'subir' containts in the word document.
- select * from CTX_USER_INDEX_ERRORS ;
No rows returned.
- SELECT TOKEN_TEXT FROM DR$FT_IDCCOLL1$I
No rows returned.
- I tried create symplifying index and doen't work.
I tried create table and index context on oracle 10.2.0.3 (test database)and works ok.
I compared both context (test database and ucm database) and i saw a difference:
In ucm database there are these preferences "analyze text"
BEGIN ctx_ddl.create_preference('ORAUCM.', 'WORLD_LEXER'); end;
BEGIN ctx_ddl.create_preference('ORAUCM.', 'DETAIL_DATASTORE'); end;
I don't know if is important diference or no.
Please if you need more information, tell me.
Thanks for your time.

Popup from ALV for displaying full text = problems!!!

Dear all,
I created an ALV to display data. In this ALV, I have a text column, which just show FIRST 30 characters of the original text.
Now I want to double click on that field, and it will pop up a small window to show full text (the original text, unknown length).
I made lots of references and I decided to use FM POPUP_WITH_TABLE because of some reasons:
a) the original text is retrieved from another FM READ_TEXT. After the call of READ_TEXT, the text will be stored into an internal table. Then, it can be passed to POPUP_WITH_TABLE without more modification.
b) POPUP_WITH_TABLE can show the text more meaningfully. I mean, if the length of the text is greater than the length of the popup window, it automatically break the line and displays the rest in the next line. ( FM POPUP_TO_INFORM does NOT do that.)
However, I've faced some PROBLEMS with FM POPUP_WITH_TABLE
1) The popup window has 2 button OK and Cancel. Is there any way just to display Cancel button?
2) If I click on Cancel or OK without choose any line on the popup window => It will raise an exception, called BREAK_OFF. In this case
If the clicked button is CANCEL => it will close the popup
If the clicked button is OK => nothing happens. And I must click on CANCEL to close the popup.
I want to close the popup windown without raising any exceptions. How can I ?
3) When I enter many complex selection criteria on Selection Screen to limit the result, displaying ALV is good. But when I click on the text field to popup => the report cannot be manipulated. I have to kill the session in SM04.
What's wrong? (because for single selection criteria, it works well.)
Every body has any suggestions?
Thank you in advance

I solved it. I just use another list for pop-up event.
Although it worked well now, I thought it was not a good solution.
Thank you all of you.
Best regards.

Problem with full-text search in RH8

Hi All,
I've just upgraded from RH6 to RH8 (laptop running Windows XP SP3; RH6 still present on the computer but the RH8 setup program did not seem to have a problem with that: identified an earlier version was present, asked for its serial number, and then proceeded).
RH8 is working just fine, except for one thing: in the WebHelp output I generate, the Search tab displays: "Error: Failed to initialize database".
As a matter of fact, the generation details in RH8 output view state:
Processing Full-text-search data...
Finished processing Full-Text-Search data in 0 sec(s)
This is the case for legacy projects that RH8 upgraded from RH6, but also when I create a project from scratch in RH8.
Now, to add to my confusion, before buying RH8, I had downloaded RH8 trial version and installed it on a spare computer (so it would not interfere with my RH6 installation and projects). The tests with this version were OK (hence the decision to buy the upgrade), and guess what: there was no problem whatsoever with full-text search, neither on legacy projects nor on new projects.
So before I go into the pains of uninstalling / reinstalling (hello registry, it's me again, trying to clean things up ;-), I'd like to know if anyone has any idea why this is happening.
Just to be clear: The RH8 version I bought and installed was a new download, distinct from the initial trial download.
The 3 differences between the trial version and the current working version are:
Trial was on a Vista computer (working version is on XP SP3)
Trial did not have RH6 present on the computer
Trial was version 8.0.0.203, whereas the working version is 8.0.2.208 (immediately after it was installed, RH prompted me to install the updates)
Thanks in advance for any help or advice.

Hi All,
Just for the record, IT people here were eventually able to have RH8 full-text search feature working on my laptop by:
1/ Installing an XP virtual machine from scratch, and then installing RH8 on it (we created a small project and generated the webhelp output, just to make sure the search feature did work in that environment).
2/ Using a software virtualization application to capture that RH8 install and deploy it on my laptop.
The problem is not solved, because we still don't know what caused it (conflicting DLLs?), but it looks like we have a workaround - although certainly not a quick and easy one ;-)

Problem with Office document structure when exporting in Windows vs full-text indexing in SQL Server

Post Author: Atarel
CA Forum: Exporting
Product: Crystal Report for .Net 2005Version: distributed with VS 2005Patches Applied: hot fix crnet20win32x86_en_chf.zipOperating System(s): Win2000 Pro SP4, WinXP SP2, Win 2003 Server SP1, Win 2003 Server SP2Database(s): SQL Server 2000, SQL Server 2005Error Messages: None
We are creating reports with Crystal Report for .Net. We both have a Windows and a Web application connecting to our database. The problem occurs only with the Windows application. We create a report and in the dialog that appears, we choose to export the report in MS Word format. Everythinglooks fine because after we save the document, MS Word is able to open and display the document. However, when we decide to add this Word document in the database in a table that has a image column bound to a full-text indexing schema, that document is never indexed. After fiddling around for a few hours, we realized that the Word document produced during the export is not a true Word document but rather a RTF document that was given a ".doc" extension. Is there a way to have a real Word document when exporting in Windows. The problem does not arise in Web because when we export, the report is displayed in Internet Explorer through the Office plugin. The Office plugin knows how to same a real Word document.
There is also a problem when exporting to Excel in Windows. It does not yield the same structure as in Web. The format of the export in Windows is not compatible with the Office IFilter of SQL Server 2000/2005, therefore the content is not available for search queries.
Any patches to fix this problem?
Regards,
Ian Perreault

Post Author: Atarel
CA Forum: Exporting
Product: Crystal Report for .Net 2005Version: distributed with VS 2005Patches Applied: hot fix crnet20win32x86_en_chf.zipOperating System(s): Win2000 Pro SP4, WinXP SP2, Win 2003 Server SP1, Win 2003 Server SP2Database(s): SQL Server 2000, SQL Server 2005Error Messages: None
We are creating reports with Crystal Report for .Net. We both have a Windows and a Web application connecting to our database. The problem occurs only with the Windows application. We create a report and in the dialog that appears, we choose to export the report in MS Word format. Everythinglooks fine because after we save the document, MS Word is able to open and display the document. However, when we decide to add this Word document in the database in a table that has a image column bound to a full-text indexing schema, that document is never indexed. After fiddling around for a few hours, we realized that the Word document produced during the export is not a true Word document but rather a RTF document that was given a ".doc" extension. Is there a way to have a real Word document when exporting in Windows. The problem does not arise in Web because when we export, the report is displayed in Internet Explorer through the Office plugin. The Office plugin knows how to same a real Word document.
There is also a problem when exporting to Excel in Windows. It does not yield the same structure as in Web. The format of the export in Windows is not compatible with the Office IFilter of SQL Server 2000/2005, therefore the content is not available for search queries.
Any patches to fix this problem?
Regards,
Ian Perreault

Problems using and configuring Oracle 10gR2 database full-text search

I am having problems trying to set up full-text indexing and search with Universal Content Management (UCM). I followed the Oracle Content Server Installation Guide for windows at [http://download-west.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/integrator/install_cserver_win_10en.pdf].
What I did was:
1. Modify E:\oracle\ucm\server\config\config.cfg by adding SearchIndexerEngineName=DATABASE.FULLTEXT to the end of the file.
2. Restart the content server.
3. Rebuild the search indexing using Repository Manager.
However, I keep seeing the following error when I query by entering words in the "Full-Text Search" box.
Unable to retrieve search results. Unable to retrieve search results. Unable to create result set for query 'SELECT IdcColl1.dID, dDocName, dDocTitle, dDocType, dRevisionID, dSecurityGroup, dDocAuthor, dDocAccount, dRevLabel, dFormat, dOriginalName, dExtension, dWebExtension, dInDate, dOutDate, dCreateDate, dPublishType, dRendition1, dRendition2, VaultFileSize, WebFileSize, URL, dFullTextFormat, dFullTextCharset, DocMeta.*
FROM IdcColl1, DocMeta
WHERE IdcColl1.dID=DocMeta.dID AND (((CONTAINS(dDocFullText,'test') > 0 ))) ORDER BY dInDate Desc'. ORA-20000: Oracle Text error:
DRG-10599: column is not indexed
Some web searches suggested the following (all of which I have tried but not resolved this problem).
1. Publish the schema using Configuration Manager (applet) and then rebuild index
2. Set the dDocFullText as a "zone field". This is not possible, because dDocFullText does not show up under the list of fields under "Database" or "DatabaseFullText" for the Search Engine drop down (when using Zone Fields Configuration).
3. Reboot the server (did not work either).
I logged onto the Oracle database and checked the IdcColl1 table. There is indeed, no index for the field, dDocFullText. There is only 1 index for the field, did. The field, dDocFullText, is a BLOB. The question is, if I am supposed to create an index manually for this field, how would I do it? A web search has not been fruitful in answering this question.
Here are my server settings.
For UCM:
Operating System: Windows 2003 Enterprise
UCM : 10gR3
Memory: 1 GB
Web Server: Apache 2.2.11
For Oracle:
Operating System: Windows 2003 Enterprise
Oracle: 10gR2
Memory: 1 GB
Thanks.

I found out what the problem was. The problem was that I had to create the role, stellent_role, as described in the installation manual. After I created this role and assigned the database user to this role, a restart of the Content Server services and collection rebuild of the index fixed the problem.
However, I did notice one thing. I checked in 3 PDF files, and when I used Repository Manager to do a collection rebuild, I noticed that for Indexer Counters, the count for Full Text was 0 and the count for Meta Only was 3.
Anyone have any ideas? Is there something else that I missed? From reading the installation manual, it was not clear how database full-text indexing/searching would handle PDF files.

Is a Full Text Index search case sensitive or not in SQL Server 2012?

I setup full text index on my contact table and am attempting to run a search on it using the following query:
SELECT *
FROM sysdba.Contact C
WHERE CONTAINS(C.FirstName, 'Test')
OR CONTAINS(C.LastName, 'Test')
The problem is it's clearly running a case sensitive search. I did a quick search to find out how to change it to be case in-sensitive and found two pages (both for SQL Server 2012) with conflicting answers:
1 - MSDN - "Query with Full-Text Search" - http://msdn.microsoft.com/en-us/library/ms142583(v=sql.110).aspx
Case sensitivity
Full-text search queries are case-insensitive. However, in Japanese, there are multiple phonetic orthographies in which the concept of orthographic normalization is akin to case insensitivity (for example, kana = insensitivity). This type of orthographic normalization
is not supported.
1 - TechNet - "Full-Text Search (SQL Server)" - http://technet.microsoft.com/en-us/library/ms142571(v=sql.110).aspx
Full-text queries are
not case-sensitive. For example, searching for "Aluminum" or "aluminum" returns the same results.
Can someone please explain this? Is it possible to do it without it being case sensitive? If yes, how?
(Sorry, I couldn't make those links b/c TechNet hasn't verified my account)
Thank you for your time and help,
Hanan

Whats the collation setting for the columns? try using a case insensitive collation as below
SELECT *
FROM sysdba.Contact C
WHERE CONTAINS(C.FirstName COLLATE SQL_Latin1_General_CP1_CI_AS, 'Test')
OR CONTAINS(C.LastName COLLATE SQL_Latin1_General_CP1_CI_AS, 'Test')
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Sql Server 2012:Full Text Catalog taking up all the disk space

We have created full text catalog and index for a pretty large table. The column on which the index is being created has a datatype of varchar(max). The problem started as soon as we started populating the catalog. It almost grew to 835GB and Population
status stuck to "Processing Notification". I think is status code 9 which corresponds with
the "Change tracking" status in the SQL. It gets stuck in this status almost for ever.
Is there a way to deal with this huge catalog size, may be shrink it or move it to a different location.
Is switching off Change Tracking going to improve the situation.
Any help regarding this will be highly appreciated.
Thanks,
Saikat

Hello,
There could be considerable amount of indexes on that catalog and the effect of the merge over them. Try the index size property of
the following function:
http://msdn.microsoft.com/en-US/library/ms190370(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SQL Server 2008 R2 Express Edition and Full Text Indexing

Hello, we have recently upgraded our web front end server from SQL Server 2005 (Standard Edition) to SQL Server 2008 R2 Express Edition (in conjuction with upgrading our main production servers to SQL 2008 R2 Standard). We have 12 Databases on our production
SQL Server that are replicated to our web frontend server to the SQL Express instance. One of these databases has a FULL TEXT INDEX. The production database is running the Adobe iFilter version 9 64Bit. The FULL TEXT CATALOG has been created and populated
and performs searches as intended. However, upon replication, when using the search option on our web page based on that PDF iFilter, it no longer works. After examining the properties of the FULL TEXT CATALOG, we note that the Catalog size on the subscriber
end is 0MB in size (whereas it is 3MB on the Publication side). Also the Unique Key Count on the subscriber side is '1' whereas on the publisher side it is 30,000+. After examining the FT Indexing logs on the subscriber side shows an error: "Warning: No appropriate
filter was found during full-text index population" On the subscriber side which is running Windows Server 2003 and SQL Server 2008 R2 Express Edition, Adobe Reader 10.1.1 is installed (all 32Bit) with the Adobe iFilter AcroRdIF.dll. When running the SELECT
* from sys.fulltext_document_types T-Sql statement, the list returned shows the PDF filter to be installed and shows the correct path. Under the System Environment Variables, that path has also been installed (from previous recommendations in researching this
problem). After numerous reboots, service restarts and re-attempts to get the FT Daemon to crawl - no success. Can anyone please help with this problem? Is there something I am missing? In an attempt to work around this problem thinking there might be a version
conflict between the 64Bit version on the publisher and the 32Bit version on the subscriber, I disabled the replication of the FULL TEXT CATALOG and tried to create a new catalog on the subscriber with the same results. Thank you for your answers in advance
- Fustrated! Sorry, somehow this got posted originally under Server Design

Hello Jeff hope your still out there. I wrote this question 2 years ago and upgraded to SQL Express with advanced services. Full Text replication worked until last week. We are operating in a virtual environment. My publisher box
is a Windows Server 2008 R2 (64bit) with SQL Server Standard Edition. My Web front subscriber is a Windows 2003 R2 (32bit) Server with SQL Server 2008 R2 Express SP1 with Advanced Services. Now the exact same thing is happening after 2+ years.
We are looking for possible updates that might have broken this but I am stretching that. Any clues please? 32bit vs. 64bit?

Full Text Search in PDF file Not Working in SQL Server 2012

OS: Windows Server 2012 @ Azure
DB: SQL Server 2012 SP 1 with Cum Update 6
Filter: OfficeFilter installed, PDFFilter64 11 installed (actually I tried 9 too)
I have done the following steps:-
1. Configure SQL Server Instance to enable FILESTREAM for Transaction-SQL Access (IO Access and Allow Remote Client Access to FileStream data) and restart the instance service.
2. Set Stream Access Level to Full Access and
3. Create Database with file stream folder and set the created database Properties.Options: FileStreamDirectorName = fileContainer and FileStream Non-Transaction Access = Full.
4. Create a FileTable with file director
5. Execute the following scripts to ensure all installed components working. PDF is listed as one of the supported filter.
EXEC sp_fulltext_service @action='load_os_resources', @value=1;
EXEC sp_fulltext_service 'verify_signature', 0 -- don't verify signatures
EXEC sp_fulltext_service 'update_languages'; -- update language list
EXEC sp_fulltext_service 'restart_all_fdhosts';
EXEC sp_help_fulltext_system_components 'filter'
reconfigure with override
6. Copy a few PPTX, DOCX, PDF file into the file director.
7. Search the data by following command. I can PPTX and DOCX files can return right result but PDF is not returned although it contains the searching contents.
SELECT *
FROM dbo.Course
WHERE CONTAINS(file_stream, 'Counsellor');
Any expert advise?
Ant in SG

Are you seeing any errors in the SQL Server Error Log, the Windows Application or System logs? How about in the Full-text crawl logging?
Troubleshooting Errors in a Full-Text Population (Crawl)
If your server has a mix of multi-threaded iFilters and single-threaded iFilters, this can cause serious problems with building the full text index. (How do I know this? Well, let's just say that I have suffered as well. And I was shocked!)
The efficiency was greatly increased by this article:
Troubleshooting: Slow Full-Text Indexing Performance Due to Filtering Process
This means changing the threading model for the multi-threaded (e.g. Microsoft Office) filters to be Apartment Threaded. Or perhaps if you are full text indexing PDF files, abandoning the free single-threaded Adobe IFilter and purchasing the FoxIt
(or some other) multi-threaded PDF iFilter would benefit you.
RLF

Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed

Hello,
I am trying to install Microsoft SQL Server 2008 R2. I get the error bellow (Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed). I already have a copy of SQL Server 2008 R2 on the machine.
I want to create a new named instance of SQL Server for some software I'm installing.
The error is below.
Any help would be much appreciated, thanks!
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -595541211
Exit facility code: 1152
Exit error code: 49957
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-06 09:14:09
End time: 2014-02-06 11:18:16
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x44D4F75E%400xDC80C325
Machine Properties:
Machine name: BAHPBZ52TY
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.50.1600.1 No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c7ced2c86d6b9813b28186cc831c2054\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS,SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: aedt2bSQL
INSTANCENAME: AEDT2BSQL
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c7ced2c86d6b9813b28186cc831c2054\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: BAH\568385
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\SystemConfigurationCheck_Report.htm

Hello,
If you see error descriptioon it gives access denied so basically it is because of some access issue.I guess You must be using some domin account for installation make sure it is added as local administrator also instead of using NT Authority network
service as SQL server service account use local system account .
Below link would help
http://serverfault.com/questions/212135/access-is-denied-error-installing-sql-server-2008-on-windows-7
You can also browse to setup.exe file and RK on it and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Embedding Full-text Index into PDF File

Hello Everyone,
I've tried to create and embed full-text index into PDF file, but with no luck. I've followed steps described at http://help.adobe.com/en_US/Acrobat/9.0/Standard/WSC28D4DBB-6A78-4027-9E04-F50FE411CFB9.w. html - there can be seen progress of collecting of data and at the end the button Update index is enabled. This is signal for me that Index was created. After clicking on Ok button, saving document as new one and then reopening "new created" document, there is info that no Index is embedded in the Manage Embedded Index dialog. Is there any other step necessary to do? Or is it bug? Adobe Acrobat Pro 9.1 on Windows Vista 32bit is used.
Jan
PS: Interesting is also comment at the bottom of above mentioned help page...

Thanks for the response. It is true that if I make changes and look at the embedded index status, it shows that it needs updating
However the problem I can't get around after extensive testing is that sometimes for no apparent reason the index is dropped on save. This can happen if I check the status of the index to make sure it is valid, save the file, and reopen it.
I've concluded that this must be a bug and am using other indexing options for the time being.

Full text search of .pdf files in a file table.

I have installed the Adobe iFilter 11 64 bit and set the path to the bin folder. I still cannot find any text from the pdf files. I suspect I am missing something trivial because I don't find much when I Bing for this so it must not be a common problem.
Here is the code.
-- Adobe iFilter 11 64 bit is installed
-- The Path variable is set to the bin folder for the Adobe iFilter.
-- SQL Developer version 64 bit on both Windows 7 and Windows 8.
USE master;
GO
DROP DATABASE FileTableStudy;
GO
CREATE DATABASE FileTableStudy
ON PRIMARY
( NAME = N'FileTableStudy'
,FILENAME = N'E:\SQLServerData\SQL2012\Engine\FileTableStudy.mdf'
,SIZE = 4096KB
,FILEGROWTH = 1024KB
,FILEGROUP FileTableStudyFileTable CONTAINS FILESTREAM
( NAME = FileTableStudyFileTable
,FILENAME = 'E:\SQLServerData\FileTableStudy'
LOG ON
( NAME = N'FileTableStudy_log'
,FILENAME = N'D:\SQLServerLogs\SQL2012\FileTableStudy_log.ldf'
WITH FILESTREAM
( NON_TRANSACTED_ACCESS = FULL
,DIRECTORY_NAME = N'FileTableStudyFiles'
GO
USE FileTableStudy;
GO
DROP TABLE dbo.Magazine;
GO
CREATE TABLE dbo.Magazine AS FILETABLE
WITH ( FileTable_Directory = 'MagazineStore'
,FileTable_Collate_Filename = database_default
GO
CREATE FULLTEXT CATALOG MagazineFullTextCatablog AS DEFAULT;
GO
--EXEC sp_fulltext_service 'load_os_resources', 1;
--EXEC sp_fulltext_service 'verify_signature', 0;
--EXEC sp_fulltext_service 'restart_all_fdhosts';
--EXEC sp_fulltext_service 'update_languages';
--EXEC sp_help_fulltext_system_components 'filter';
--RECONFIGURE WITH OVERRIDE;
SELECT document_type
,path
FROM sys.fulltext_document_types
WHERE document_type = '.pdf';
SELECT *
FROM sys.fulltext_document_types
ORDER BY document_type;
DROP FULLTEXT INDEX ON dbo.Magazine;
GO
SELECT TOP 1 indexes.name IndexName
FROM sys.indexes
JOIN sys.tables ON indexes.object_id = tables.object_id
AND tables.name = 'Magazine'
JOIN sys.schemas ON tables.schema_id = schemas.schema_id
AND schemas.name = 'dbo'
WHERE indexes.is_unique = 1
AND indexes.name LIKE 'PK__%';
GO
-- Drag documents to folder.
CREATE FULLTEXT INDEX ON dbo.Magazine
( file_stream TYPE COLUMN file_type)
KEY INDEX [PK__Magazine__5A5B77D541728F3E];
GO
-- Wait for index to build
SELECT DATEDIFF(ss, crawl_start_date, crawl_end_date) IndexBuildSeconds
FROM sys.fulltext_indexes
--ALTER FULLTEXT INDEX ON dbo.Magazine START UPDATE POPULATION;
SELECT *
FROM dbo.Magazine
WHERE file_type = 'pdf';
SELECT *
FROM dbo.Magazine
WHERE FREETEXT(*,'new core licensing')
AND file_type = 'pdf';
SELECT *
FROM dbo.Magazine
WHERE CONTAINS(*, N'"Microsoft"')
AND file_type = 'pdf';
SELECT *
FROM sys.fulltext_catalogs;
SELECT *
FROM sys.fulltext_indexes;
SELECT *
FROM sys.fulltext_index_columns;
SELECT *
FROM sys.fulltext_index_catalog_usages;
Thanks for any help.
Tom G.

Hello,
We believe we have figured this out. It looks like it has to do with the length of the default folder location for the Adobe iFilter.
I was able to reproduce the issue and the following resolved it for me. See if this resolves it for you all as well.
Here is how to get Adobe Version 11 PDF filter to work.
1 . If you haven’t already, run the following in SQL Server:
Sp_fulltext_service ‘Load_os_resources’, 1
Go
--you might also need to run: sp_fulltext_service ‘Verify_signature’,0 --This is used to validate trusted iFilters. 0 disables it. So use with caution.
--go
2. Stop SQL Server. (Make sure FDHost.exe stops)
3.
Uninstall the Adobe ifilter (because it defaulted to having spaces or the folder name is too long).
4.
Reinstall the Adobe iFilter and when it prompts for where to install it, change it to: C:\Program Files\Adobe\PDFiFilter
5.  Once the installation finishes, go the computer’s Environment variables. Add the following to the PATH.
C:\Program Files\Adobe\PDFiFilter\BIN
NOTE: it must include the BIN folder
NOTE: If you had the OLD location that included spaces, remove it from the path environment variable.
6. Start SQL Server
7.  IF you had an existing Full-text index on PDFs, drop the full-text index and recreate it.
8. You should now get results when you run sys.dm_fts_index_keywords('db','tblname') --Note: Change db to be the actual database name and tblname to be the actual table name.
Give this a try and see if this fixes yours.
Sincerely,
Rob Beene, MSFT

Document Management / Full Text Search in Projects & SolMan Directory

Hello experts!
I want to implement Full Text Search in my SolMan and therefore need your help.
I have installed Trex 7.10 and am already able to search within my Solution Database (Problems/Solutions).
Now I want to be able to search within all documents in my SolMan Installation - e.g. Roadmaps, SAP Scenario Descriptions or my own uploaded documents.
In the IMG I already found the section Document Management but I cannot get the needed RFCs (IMSDEFAULT and IMSDEFAULT_REG) working.
There is already a RFC called IMSDEFAULT, which was created during the installation of Trex and runs the
Registered Server-Program: Trex_SOT_20080327090311
I tried to configure my RFCs according to the IMG but, as I said, cannot manage to get them working.
I hope anybody has an idea or an guide on how to implement Full Text Search!
Please be so kind and provide help - thanks in advance!
Best regards
Gerold

Gerold,
I am running into the same issues because we want to do full text search on project documentation within Solution Manager. The default RFC connections IMSDEFAULT_REG and IMSDEFAULT do not work with the standard settings.
We created one index for IWBSOLAR so maybe I also need to check IWBPROJ in SKPR06 for project documentation and create a new index for this one ?
The indexing for IWBSOLAR now fails although there seem to be over 6000 documents marked but none are put in the index. After indexing there is a list of the documents all with code 6401 but cannot find any where what this code means. It seems to be succesful as all entries are green.
Any help/suggestions on this topice would be greatly appreciated.

Full text search on PLM Web UI

Hello,
Full text search functionality in DMS with TREX solution , is working with SAP GUI. ( Original is checked in CV01N or CV02N )
Same functionality is not working with PLM Web UI .
Is there any setting has to be activated for this.
Thanking you,
Regards,
Satya

Hi ,
Yes. When I checkin Document in CV01N , then I can find in CV04N.
But if I check original in PLM Web UI , then I can not find in CV04n.
I assume that indexing will not problem as it is working in SAP GUI case.
Indexing functionalities ( TREX ) are not called when Document is checked in through PLM Web UI.
Where we can check these settings ?
Thanking you,
Regards,
Satya

Radio problem (full text)

Similar Messages

Maybe you are looking for