Radio Remote Not Working As It Should

tonight i bought a radio remote so I can listen to the radio. i plug it in, it works. however when i go to change the channel, it wont change. the volume can be turned up and down from both the ipod itself and the remote. also the radio can be turned on/off by both the ipod and the remote. any ideas? any help? thanks.

Same exact problem here after 7 months of problem free usage. I cannot change the stations on the touch wheel or the remote. Tried resetting and re-syncing to no avail. Arghhh!!!

Similar Messages

  • 2 new radio remotes not working on 2 new iPods. Any ideas?

    I bought 2 new video iPods 3 weeks ago from the Apple store in Florida. (1 black, 1 white - so I assume different batches.) They both worked fine with no problems until I came home and bought a radio remote in the UK.
    The remote didn't work at all and seemed to drain the power from the iPod as soon as it was plugged in, the screen faded and the iPod switched off. The only way to get it on again was to unplug the radio and plug in the usb charger for a few seconds. This was the same with both iPods.
    Called Apple who thought the remote was faulty so they sent out a new one. New one has just arrived and it does the same thing, again on both iPods.
    Apple are sending out yet another remote, but I'm concerned there may be some sort of compatability issue with certain video iPods maybe? Would there be any difference between UK bought and USA bought items that could cause a problem? I don't really see how but it seems strange that it happens to both iPods. Maybe just sheer bad luck to get 2 faulty radios?
    iPods are up to date btw - 1.2.1
    Anyone any suggestions or had similar problems?
      Windows XP Pro  

    Yip, back in the UK and no, no ipod stores near me, it's all done via the helpline and the PO.
    The latest replacement radio arrived today. It works on the black iPod but not on the white one. It drains the power on the white one, as did the others.
    I think I may have had 2 issues here....faulty radios but also a faulty iPod maybe.

  • Remote not working properly with one TV

    For one of my TV's the remote is not working as it should. Just today - the operating distance from my couch, which is about 8 ft got reduced to about 3 ft. I don't have this problem with my TV in the bed room. I changed the batteries and they are fully charged. Tried calling Verizon - don't get to speak to a human anymore. They prompt me to buy a new remote. Can someone help me.

    It's been about an hour since I posted my issue and got your reply.  All of  sudden everything started working again. All we did was turned off and turned on everythng. Thank you for your help. I never got to try your solution - but will keep that as a possible solution in case it happens again.

  • ITunes RADIO is not working.  "iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again." Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so -  iTu

    iTunes RADIO is not working.
    “iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
    iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
    Simply put, firstly, I can't connect to the internet when I click on Radio.  People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
    Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
    Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
    Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
    Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
    Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
    Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
    ===============================================================
    NOTE:  no password for iTunes exists in my Keychain. Is this a problem?
    Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
    Apple store id It works via direct internet connetion but not through iTunes.  Very strange.
    ===============================================================
    FYI, Hardware Overview:
      Model Name:                       MacBook Pro
      Model Identifier:                 MacBookPro8,2
      Processor Name:               Intel Core i7
      Processor Speed:               2 GHz
      Number of Processors:    1
      Total Number of Cores:    4
      L2 Cache (per Core):         256 KB
      L3 Cache:                            6 MB
      Memory:                              16 GB
      Boot ROM Version:            MBP81.0047.B27
      SMC Version (system):      1.69f4
      Serial Number (system):   C0*******F8V
      Sudden Motion Sensor:
      State:   Disabled
    Intel 6 Series Chipset:
      Vendor: Intel
      Product:            6 Series Chipset
      Link Speed:       6 Gigabit
      Negotiated Link Speed:           6 Gigabit
      Description:      AHCI Version 1.30 Supported
    M4-CT512M4SSD2:
      Capacity:           512.11 GB (512,110,190,592 bytes)
      Model: M4-CT512M4SSD2                         
      Revision:           040H   
      Serial Number: 0000000012330912E75A
      Native Command Queuing:    Yes
      Queue Depth:   32
      Removable Media:        No
      Detachable Drive:        No
      BSD Name:         disk0
      Medium Type:      Solid State
      TRIM Support:     Yes
      Partition Map Type:     GPT (GUID Partition Table)
      S.M.A.R.T. status:         Verified
      Volumes:
    disk0s1:
      Capacity:           209.7 MB (209,715,200 bytes)
      BSD Name:         disk0s1
      Content:            EFI
    disk0s2:
      Capacity:           511.25 GB (511,250,432,000 bytes)
      BSD Name:         disk0s2
      Content:            Apple_CoreStorage
    Recovery HD:
      Capacity:           650 MB (650,002,432 bytes)
      BSD Name:         disk0s3
      Content:            Apple_Boot
      Volume UUID:   600737FB-7A29-3BAE-859E-CBFE2E90C39A
    <Edited by Host>

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • Remote not working - doesn't seem to be pairing problem - any other ideas?

    Remote not working - Unpair does nothing - Status light solid/screensaver running - no response from status light when any button clicked on remote - new batteries in remote - only Apple remote in the house - anyone have a suggestion?

    Welcome to the Apple Community.
    You might try restarting the Apple TV by removing ALL the cables for a 30 seconds.

  • HT5654 Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Hello, Jdragone. 
    Thanks for the question.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • Apple remote not working

    My Apple remote is not working with my MacBook. The Mac OS X 10.5 Help Knowledge Base says to go to Security > Systems > and Disable remote control infrared receiver. I don't have a systems button or box nor the checkbox to Disable remote control infrared receiver. And, my MacBook has an infrared receiver.

    Hi Focus,
    I have the same problem. When I update from TIger to Leopard the front row apple remote still working. But is been a long time the last time i used and now on 10.5.2 osx the apple remote not working as I imagine.
    I read some answers that help me understand better the problem. My check box of "disable remote.."is unchecked and I saw a "pair" button and try to pair with my apple remote. The tips told me to HOLD "menu" and "next" buttons of apple remote to pair him with computer. And Works fine. So I try to push only Menu button (as I've done so many times on tiger) but still does not working. So I realize the command to "start front row from apple remote" now on Leopard 10.5.2 is MENU+NEXT buttons and does not anymore only menu button. For me works like this.
    While I write this answer I try again push and hold only MENU button and after almost 2 or 3 seconds holding button appears on screen an virtual image of my apple remote signaling to replace the battery, may be now will be works only on push menu, but I need to change the battery first.
    I hope help somebody.

  • Apple infrared remote not working

    Just a few days ago I updated Keynote, my time scale is a little hazy but I know recently, like last week, I used my appl infrared remote to control Keynote. I was able to press play and advance slides. This was a great thing, I remember doing and thinking wow apple is great. Now it doesn't work. I can turn the volume up but playing or advancing the slides does nothing. It sure seems like the last update removed this feature.
    Anyone know whats going on?
    Thanks,
    Kris

    Hi Kris,
    If you are having an issue with your Apple Remote not working with your Keynote presentations, I would suggest that you troubleshoot using the steps in this article - 
    Troubleshooting the Apple Remote - Apple Support
    Start with the section titled If you're using the remote with a computer.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • My itunes radio is not working on my microsoft compuer. I downloaded the new itunes and it says there is an error in the itunes store. I am not sure what is going on?

    My itunes radio is not working on my microsoft computer. I downloaded the new itunes but it says there is an error in my itunes store. What do i do to fix the problem?

    Try starting Aperture with the command and option keys held down.  You'll get 3 options.
    Try each, starting at the top, in order, checking after each to see if it fixes the issue.

  • How do I correct the "Wireless Radio is not working" problem on my Photosmart C410 Printer?

    HP Photosmart Prem C410a All-in-One
    Windows 7 64-bit
    Wireless Radio is not working
    Trying to change from USB to wireless setup
    purchased at Staples on 8/19/2010 - means warrenty has expired

    With the printer ON, unplug power from the back of the printer for 30 seconds.  Does that reset the radio?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Apple remote not working, is there a way to setup Apple TV without the remote

    Apple remote not working, is there a way to setup Apple TV without the remote

    Welcome to the Apple Community Sylvia.
    There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.

  • Creative cloud photoshop blur tool not work as it should be

    creative cloud photoshop blur tool not work as it should be !
    I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
    and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
    I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
    at least it not bluring enough to see any major changes.
    the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
    (note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
    just need advise not to share system specs.
    and thats what this forums board is for getting advice and read what others say about the issue at hand.
    it's not to post or share system specs  !!!
    so with that out of the way I need advice only please ?

    Hi,
    It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
    If you zoom to 100% do you see any change when using the blur tool?
    What are the pixel dimensions of the image?
    (Image>Image Size)
    If you try a small image, does the blur tool work?
    What about when you use the mouse instead of your tablet?
    Can you at least tell us what operating system and version of photoshop your using?

  • My passbook on my iphone 5 works the same as it did for the iphone 4, its not working like it should. why?

    my pass book on my iphone 5 does not work like it should, it works just the same as it did on the iphone 4, i tryed the date an time trick like 5 times an still nothing. i tryed factory reset an nothing. i know it workds different on the iphone 5 then the 4. but i dont know what else to do.

    Can you be more specific about what isn't working?  Are you running iOS 6 or iOS 6.1?
    Did you read the support page on Passbook?  http://support.apple.com/kb/HT5483

  • Siri is not working like it should i ask it to play songs and it just says sorry i cant do that any ideas y

    siri is not working like it should i asked it to play songs and it just says sorry i cant do it any ideas y

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4?

    I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4? Mac OS X 10.6.8.  17" MacBook Pro

    Use your Software Update under the Apple menu, it SHOULD bring Safari up to 5.1.9 on OS X 10.6.8.
    Apple IS issuing security and other updates for Snow Leopard users.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    Safari 6+ is only for 10.7+ users as OS X is morphing into iOS.
    10.7 and 10.8 will not run your PPC based apps of 10.5/10.6
    If Software Update is not working, then you have other issues, backup your users folders off the machine to a external storage drive (not TimeMachine!) and run through this list of fixes.
    Most commonly used backup methods
    ..Step by Step to fix your Mac

Maybe you are looking for