RADIO SIGNALS ARE INTERFERING WITH MY CALLS HELP!!...

hi guys i've been using skype for almost 2 years now and all has been well until today.
when ever i call someone the other person always seems to hear an foreign radio station and it overpowering my voice so they cant hear me
PLEASE HELP!!!!
cheers

That generally means your computer equipments is picking up interference. You should try a different headset/mic or plugging into another audio/USB jack if that option exists. Try plugging your computer into a different set of outlets or temporarily move your computer to see if it goes away. Any of your computer equipment could be picking up interference from a variety of sources (any electronic equipment, shared electrical outlet or baby monitors in the area). Headphones/mics after all are antennas/powered antennas.

Similar Messages

I am having issues deactivating my version of CS4. I receive an error message stating unable to connect or that my firewall or proxy settings are interfering with the process. I do not want to uninstall until i can deactivate as i wish to use a copy on an

am having issues deactivating my version of CS4. I receive an error message stating unable to connect or that my firewall or proxy settings are interfering with the process. I do not want to uninstall until i can deactivate as i wish to use a copy on another laptop

Hi K8tym,
Please refer to below article.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Thanks

Vibrations in Macbook Pro are interfering with trackpad!?

I bought a new magsafe today and since I've been using it my trackpad doesnt work. There also is a strong vibration in the place where you rest your hands while typing. I have felt this before multiple times but it never bothered me and i have read lots of posts about this occurance. I believe there are slight electric currents running through my macbook do to improper grounding.
It is new thought that my trackpad doesnt work because of these currents. I cant really move the cursor, it will randomly jump to places, as if something is interfering with my finger... I realized though, that if i rest my left hand on the macbook, i can use the trackpad just fine with my other hand. I guess the current then goes through my hand and doesnt interfere with the trackpad anymore.
I guess i found a shortterm solution but obviously, i need some answer to the problem, has anyone expericenced anything like this before? I really would apppreciate your help.
Thanks a lot

Shut down
Remove battery
Connect mag safe
Boot up
If your trackpad works now your battery may be bloated and you will need a new one. Mine got fat and pressed up against the trackpad.
-Ed

Mail backups are interfering with my access

Mail is forever downloading supposedly new incoming messages (most recently to the tune of 360,000 messages!) Sometimes they show up in trash and sometimes they are not to be found. When I find them in trash (which I keep deleting to no effect) they appear to be backups made about twice a minute! Even if I wanted to find a previous version, I couldn't wade through that many backups. This is ridiculous and interferes with Mail's job of sending and receiving actual mail and even with other internet access.
I do a lot of my message writing offline, if that makes any difference. I even tried Secure Delete once and it made no difference - but I was offline at the time. Secure Delete scares me as I have too often accidentally deleted unintended items. Processor 1.7 GHz intel Core 15 (or is it iS?); Memory 4 GB 1600 MHz DDR3; local internet quality usually very slow. Don't know what other information might help.
Thanks, saltyrobn

I blew it! I closed rather than quit Mail (not even sure of the difference). Found an Envelope file that was 3.2MB! Deleted them and went back to mail. One account seems to have been restored including 22 outbox messages from up to 2 years ago! Some of which I know did get out already. Others I don't know.
Another account shows an empty inbox with the sub boxes also empty.
I redid it, properly. Quit instead of closed Mail and deleted the 3.2 or thereabouts MB of envelope files. Started Mail. Eventually my second account was restored.
It is now showing incoming messages at 167353 and climbing. Checked trash. A whole bunch of backup copies yet again but nowhere near the 160000 is says are already in. At least not yet. While writing that the incoming message count has climbed to 169433.
Robn

Firefox appears to be interfering with Office 2007 Help function

In all Office 2007 products the Help ? (top right of screen) isn't working nor is the F1 key.
They come up with:
"Do you want to open or save this file?
'''Name: Transition.htm
Type: Firefox document, 2.84 KB'''
From: MS.Winword.12.1033”

XML is text. Problem solved.

Uploading data on pc interfering with iPhone calls

If I am moving data from my hard drive to a network drive on my pc or vice versa, callers or recipients of my call state that my conversation on the verizon iphone 4 is interrupted - they can only understand every other word. As soon as data exchange is complete phone service returns to normal. I have a Verizon booster for phone service where I live, and DSL wireless internet service.
Has anyone else experienced this? It's a real showstopper for business calls.

You could use icloud to sync contacts and calendars.
Both the ipad and iphone are intended to sync to a computer.
You can redownload apps from the app store, assuming that they are iphone compatible.
Downloading past purchases from the iTunes Store, App Store, and ...

All of my programs are opened with mozilla!help!!!

i tried to open one of my programs using "open with" and then i selected mozilla firefox.then all of my programs are opened using mozilla!actually it doesnt opened!just a mozilla page is came!

Try this.
Go to Run Command ''(Start + R)''
Type ''regedit'' in Run Command
Then Go to below path.
''HKEY_CURRENT_USER_\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts''
Then search for ''.ini''
Delete hole .ini key or delete the ''userchioce'' key on that.
Then just Restart Your computer.

Unwanted radio signal through powered speakers

We plug our ipod into a small set of powered speakers and using the alarm function to wake up in the morning. But faint radio signals are coming through the speakers making it impossible to sleep. If we turn off the speakers, the ipod alarm is useless.
This also happens on receiver's Aux input running iTunes from computer downstairs.
Any ideas on how to prevent?
Thanks!

Almost certainly this a fault with your powered speakers and not the iPod. Something in the speakers is acting as a radio receiver.

Camcorders that are compatible with imovie 11

Need a list of camcorders that are compatible with imovie 11

http://help.apple.com/imovie/cameras/en/index.html?lang=en_US

I just got the iPhone 5. It's completely synced and working. All my contacts are loaded. However, caller ID is not working when I receive a call or a text. Can anyone help me out with this?

I just got the iPhone 5. It's completely synced and working. All my contacts are loaded. However, caller ID is not working when I receive a call or a text. Can anyone help me out with this?

Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

All my contacts are stored with country code for eg 233 244 123456. Contact names do not appear during incoming calls. Once the country code is removed , names appear. Please help

All my contacts are stored with country code for eg +233 244 123456. Contact names do not appear during incoming calls.
Please help

http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

What is the best Radio app for Iphone with poor Signal

hi folks
i live in rural shropshire, UK and where there is a poor signal reception and no 3G so i was hoping if someone could tell me what is the best radio app with about 2-3 bars of signal on O2 please can someone help thx

Well, 2(.(7)5)G (GPRS/EDGE) is still sufficient for a lot of (mostly HE-AACv2) streams - they're between 24 and 40 kbps, . That is, first, check out whether there are favorite stations in the station directory of the HE-AACv2-specific radio app "Tuner2 Hi-Fi Radio". Note that there are other HE-AACv2-capable clients but this one is the best.
Below is an excerpt from the dedicated section of my all-in-one iPhone radio article, just discussing these questions. Sorry, there are no links or not any kind of formatting in the text - I just couldn't paste it by keeping them.
2.1 3G vs. 2.(7)5G vs. Wi-Fi
Whenever possible, deactivate 3G (if you have a second- or third-generation iPhone used in a compatible 3G network, that is). Why? It’s easy: I’ve made some very thorough experiments with power consumption when streaming over cellular (mobile phone) connections. For this, I’ve listened to a 31 kbps VBR HE-AACv2 stream in Pocket Tunes. I’ve measured the battery life decrease of 0.6%/minute when streaming in 3G and 0.3%/minute when doing the same in 2.75G (EDGE) and 2.5G (GPRS). This means streaming 3G consumes two times more battery than in 2.75G with a stream that, when streamed over Wi-Fi, consumes 0.18% power a minute.
This also means that, even if you have an unlimited Internet data plan, try using Wi-Fi whenever possible because it’s almost two times more battery-friendly than even 2.75G (EDGE) / 2.5G (GPRS) – and 3.3 (that is, 60/18) times more so compared to 3G.
Having to rely on pre-3G stream speeds means the following:
- If you only have GPRS connection (but not EDGE), select a station broadcasting at less than 35-40 kbps to avoid pauses and stuttering. You can easily see if your phone is in GPRS only: then, to the right of the name of your network, there is a circle and not the capital letter ‘E’ (it’s '3G' when in 3G mode and it’s here that the Wi-Fi signal is shown when operating over Wi-Fi.)
Note that, with some networks (for example, Vodafone in some? all? countries) there’s no EDGE at all. There, you either use 3G or GPRS. The latter rules out all stations with speeds over 40 kbps. If this is the case, you will most probably have to rely on HE-AACv2 (also known as AAC+) streams, should you want good audio quality and stereo sound. The other formats, MP3, AAC-LC (the two formats natively supported by the built-in QuickTime player) and WMA are completely unable to deliver good, stereo audio quality under 40 kbps; OGG is able, but around 36-38 kbps, which may result in stuttering over lower-quality GPRS connections or congested network.
You can find a lot of AAC+ streams at http://dir.xiph.org/by_format/AAC+ and http://yp.shoutcast.com/. Note that, with the latter, you will want to click radio stations with AAC+ type (see the last column). Unfortunately, unlike with collecting with MP3 stations only, you will not want to tap the header of the last, “Type” column, to order them to collect all AAC+ stations at the end of the list because it’s not possible to easily jump to the end of this list. (Tapping will only order the stations in a way that the list starts with MP3 ones; that is, stations well above 40 kbps - and the few that broadcast under 40kbps, do so with awful audio quality.)
Note that moodio.fm (which, as with the former two, stream directories, that is, xiph.org and shoutcast.com, has been introduced in section 1. Built-in capabilities: QuickTime), by default, also uses AAC+. As with the former two stations, in order to play back these AAC+ streams in an AAC+-capable radio player (the built-in QuickTime isn’t one of them) like Pocket Tunes Radio or FStream, you’ll want to copy these links to the clipboard and, then, paste them into a custom, user-defined station in these apps (as long as you don’t find a station of your liking in the built-in station directories of these radio clients). To do so,
1. in Safari, long-tap the link and, then, select “Copy” from the context menu
2. Switch to the radio station, go to its dedicated custom station entry dialog (with FStream, Favorites / Edit / Add new webradio at the bottom; with Pocket Tunes, Favorites / Edit / +) and tap the URL field a bit longer after cleaning it entirely (if there’s a http:// in it; with FStream, there isn’t). You’ll see a Paste flag (icon) as in this screenshot
3. Just tap it; the station URL will be pasted to the field
4. You can also give your station a name
(Note that you can also manipulate the favorite list of FStream via Wi-Fi, from a desktop Web browser. It offers a far faster way of adding and deleting favorites.)
Note that Pocket Tunes Radio also has a built-in Web browser. If you navigate from it to, say, m.moodio.fm or yp.shoutcast.com, you won’t need to do any copy / pasting like explained in the previous section. FStream (my other pick for HE-AACv2 playback) doesn’t have a Web browser. Note that several other (except for ooTunes, not that recommended) players also have a built-in browsers. You can do exactly the same in all of them except for eingrad’s RadioBOX, which, currently, has bugs in its Web browser: when you tap a link, the playback (if the built-in QuickTime is compatible with it) will start in QuickTime and not in the built-in player. (The developers stated they would fix this bug some time.)

HT4623 i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

Calls with zero duration are sent with 1/1/1970 timestamp

Hello.
We are configuring billing on a third-party server for a hospitality projects.
All is fine so far. However we saw that calls with zero duration (such as missed calls, busy tones etc) are tagged with a wrong timestamp of 1/1/70.
Since we are passing this over to the hotel PMS, they are having trouble interpret it and often their interface crashes.
Has someone encountered any similar issue?
Our System version: 9.1.1.20000-5

I only see the 1970 date in fields like Call Connection time. And for a missed/busy call, that's the best you can do as the call didn't connect, so the call can't have a connection time. Either the field has the 1970 date, or it has NULL in it. Either way, if your third party software can't cope with it, it's broken as this is all as per Cisco's spec.
The use of the 1970 date is (OK, a time of zero) is clearly documented
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/9_1_1/cdrdef/CUCM_BK_C268EF1B_00_cucm-cdr-admin-guide-91/CUCM_BK_C268EF1B_00_cucm-cdr-admin-guide-91_chapter_010.html#CUCM_RF_T0347117_00
GTG
Please rate all helpful posts.

AP with radio signal strength configurable

Hi,
Is there any available cisco aironet model which enable administrator to configure the strength of the WiFi wireless radio signal? Example, we can tune to 10dB, 20dB, 30dB and yet maintaining the throughput (10 Mbps, 25 Mbps)
TQ

1) Some devices you configure the transmit power in the dBm values typically -1 0 1 2 5 8 11 14 17 20, other devices will do it based on mw values typically 100mw, 50mw, 25mw, 12.5mw, 6mw, 3mw, 1.5mw, etc.
2) There are some differences in the transmit power depending on the model of 1200 you have but for research purposes you should be fine.
3) No the transmit power can change based on the modulation See the charts below these are for an AIR-LAP1242AG-A-K9
802.11a/n Radio
Configured Power: 17 dBm (level 1)
Active power levels by rate
     6.0 to 36.0 , 17 dBm
    48.0 to 48.0 , 16 dBm, changed due to regulatory maximum
    54.0 to 54.0 , 12 dBm, changed due to regulatory maximum
6.0-bf to 36.0-b, 17 dBm
48.0-b to 48.0-b, 16 dBm, changed due to regulatory maximum
54.0-b to 54.0-b, 12 dBm, changed due to regulatory maximum
     m0. to m4.   , 17 dBm
     m5. to m5.   , 15 dBm, changed due to regulatory maximum
     m6. to m6.   , 11 dBm, changed due to regulatory maximum
     m7. to m7.   , 10 dBm, changed due to regulatory maximum
     m8. to m12. , 17 dBm
    m13. to m13. , 15 dBm, changed due to regulatory maximum
    m14. to m14. , 11 dBm, changed due to regulatory maximum
    m15. to m15. , 10 dBm, changed due to regulatory maximum
   m0.-4 to m3.-4 , 17 dBm
   m4.-4 to m4.-4 , 16 dBm, changed due to regulatory maximum
   m5.-4 to m5.-4 , 14 dBm, changed due to regulatory maximum
   m6.-4 to m7.-4 , 10 dBm, changed due to regulatory maximum
   m8.-4 to m11.-4, 17 dBm
m12.-4 to m12.-4, 16 dBm, changed due to regulatory maximum
m13.-4 to m13.-4, 14 dBm, changed due to regulatory maximum
m14.-4 to m15.-4, 10 dBm, changed due to regulatory maximum
   6.0-d to 18.0-d, 17 dBm
24.0-d to 24.0-d, 16 dBm, changed due to regulatory maximum
36.0-d to 36.0-d, 15 dBm, changed due to regulatory maximum
48.0-d to 48.0-d, 14 dBm, changed due to regulatory maximum
54.0-d to 54.0-d, 10 dBm, changed due to regulatory maximum
OffChnl Power: 17, Rate 6.0
802.11b/g/n Radio
Configured Power: 20 dBm (level 1)
Active power levels by rate
     1.0 to 11.0 , 20 dBm
     6.0 to 48.0 , 17 dBm, changed due to regulatory maximum
    54.0 to 54.0 , 16 dBm, changed due to regulatory maximum
6.0-bf to 48.0-b, 17 dBm, changed due to regulatory maximum
54.0-b to 54.0-b, 16 dBm, changed due to regulatory maximum
     m0. to m5.   , 17 dBm, changed due to regulatory maximum
     m6. to m6.   , 16 dBm, changed due to regulatory maximum
     m7. to m7.   , 14 dBm, changed due to regulatory maximum
     m8. to m13. , 17 dBm, changed due to regulatory maximum
    m14. to m14. , 16 dBm, changed due to regulatory maximum
    m15. to m15. , 14 dBm, changed due to regulatory maximum
   m0.-4 to m4.-4 , 17 dBm, changed due to regulatory maximum
   m5.-4 to m6.-4 , 16 dBm, changed due to regulatory maximum
   m7.-4 to m7.-4 , 14 dBm, changed due to regulatory maximum
   m8.-4 to m12.-4, 17 dBm, changed due to regulatory maximum
m13.-4 to m14.-4, 16 dBm, changed due to regulatory maximum
m15.-4 to m15.-4, 14 dBm, changed due to regulatory maximum
   6.0-d to 18.0-d, 17 dBm, changed due to regulatory maximum
24.0-d to 36.0-d, 16 dBm, changed due to regulatory maximum
48.0-d to 48.0-d, 14 dBm, changed due to regulatory maximum
54.0-d to 54.0-d, 13 dBm, changed due to regulatory maximum
OffChnl Power: 20, Rate 1.0
Hope this helps
Please rate helpful posts.

RADIO SIGNALS ARE INTERFERING WITH MY CALLS HELP!!...

Similar Messages

Maybe you are looking for