Radio there is no sound since recent update to iOS7?
I have just updated to iOS 7 and now am getting no sound from the tune in radio
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Similar Messages
-
The video and sound was working on my computer two days ago (and has ALWAYS worked on my computer since purchasing it in 2010) but now for some reason I can't play video and there is no sound. I updated software today. Still sound & video not working.
Please help.One of the following steps should help.
1. Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Restart computer. Relaunch Safari.
2. Enable Plug-ins
Safari > Preferences > Security
Web Content:
Click in the box for "Enable Plug-ins".
3. Check whether you are currently in YouTube HTML 5 trial.
http://www.youtube.com/html5
At the bottom left of the page uncheck the box for
"You are currently in the HTML5 trial".
4. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the boxes next to all items.
Check the box next to "Remove all website data".
Click "Reset".
5. Turn off Extensions/Plug-ins if any that may interfere with Flash working properly.
Safari > Preferences > Extensions
Best. -
Since recent updates of iOS, I have noticed when using my iPad that my apps close automatically when I have to leave the room or am otherwise distracted for a few minutes. It is sometimes time consuming to sign back in and get back to the task where i left off. Is there a setting I can change so it will keep the apps open until I am ready to close them? Thanks for your help.
Did you have this problem before Restoring you iPad?
If you did then did you restore with a backup. You may have reinstalled something that is conflicting in this back up
If not then sounds like either something went array with the clean install or a hardware issue.
I know it's long winded but have you tired a clean install then downloading the apps again?
PJRS -
Help please, i lost my iphone 4s sound since i update to ios 7.0.6
Help please, i lost my iphone 4s sound since i update to ios 7.0.6,
Calls voice is okay but all other music, videos, apps all soundlessHave you tried reseting your device by holding home+power button until the apple logo appears? If this doesnt hel ,please back up your device and do a fresh restore with itunes. To do a restore, follow these steps:
http://support.apple.com/kb/ht1414
Hope I helped -
My iPhone 4S will not discover any bluetooth devices since I updated to iOS7.
My iPhone 4S will not discover any bluetooth devices since I updated to iOS7. I have restored the phone to factory settings etc.. still not working! I have tried this on numerous devices, e.g. handsfree in car, ipad. Please help
Hello there, DonnaLou.
The following Knowledge Base article provides some pretty extensive steps for troubleshooting Bluetooth issues:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
If you feel you have gone through all of these steps already, the article recoommends:
If the issue persists after restoring your iOS device in iTunes, contact Apple for support and service options.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.
Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy -
my iphone 4 has been recently updated to ios7 but now it wont ativate. Why? it keeps saying server cannot be reached
Too many people are flooding Apple's servers, everyone is having this issue, try every so often, or wait until tomorrow.
-
P6N Diamond New Problem: Second HDD Randomly Starts/Stops Since recent Update
Howdy All,
Continuing problems with the P5N Diamond.
This one's new.
Previously I had the same problem as many others with the cold boot issue. Somehow, someway, it just stopped: cold boot or not, one day it just started booting fine....go figure.
However, I recently (about 3 weeks ago) did the MSI live update that included something or other pertaining to the E-SATA....support for it or something to that end. Although I don't use the E-SATA, I installed it thinking I might at some point and since installing it, I have discovered a new problem: my second drives (in RAID 0) just opens/closes randomly. It seems to mostly occur when operating demanding programs: gaming, watching a video, that sort of thing.
Everytime it does this, it takes me to desktop and asks me what program I want to use to open the program......which when I do, is nothing more than my second (D drive) HDDs in RAID 0. I then get the yellow pop up message in the bottom toolbar from Windows saying it's experienced a write failure problem. It hasn't done any damage that I can tell and I've lost nothing, but being taken to desktop perpetually is a major issue. This problem is driving me absolutely up the wall. No sooner than I start to do something and wham.....I'm at desktop being asked what program I want to use to open up the second HDDs. I've also tried just leaving it open but to no avail: it just randomly continues to open and close.
I have my O/S on the C drive and 2 more HDDs in RAID O for back up on ports 6 & 7. Since doing the MSI update that included the E-SATA whatever, this new problem almost prevents the computer from being usable: certainly nothing in gaming is possible along with anything that requires uninterruption.
Here's my system:
M/B: P6N Diamond
CPU: E6850
RAM: Corsair XMS PC-8500, 2 x 1 gig
HDD: 1- WD 150 Raptor
HDD: 2- WD 5000AAKS in Raid 0
Vid Card: EVGA 8800GTX
PSU: PC Power & Cooling 750 Silencer
ODD: Sony DRU 830A
FDD: Sony Floppy
Misc: Scythe fans x 5
O/S: XP Pro w/ SP2
Running BIOS 1.2
So, being fairly certain the MSI update created the problem, my question is, how do I undo the MSI's most recent update to remove it? When I go into Add/Remove Programs, nothing is listed there. I'm not sure this is the source of the problem but I do know I didn't have it beforehand.
I'd greatly appreciate any help with this....even any ideas. While I have some computer knowledge, I'm not as tech savvy as most here, but this problem is, apart from driving me up a wall, making the computer almost unusable. FYI, I haven't done a System Restore because I've installed several things since and don't want to lose them if I can isolate the problem, but I will if that's what you all recommend.
Again, sorry for what may be a noobish question, but I'm not sure where else to go. After dealing with MSI's tech support, I'd rather talk to a wall.
Thanks greatly.
Pepper1Mark,
Forgive me for asking, but I am a bit confused. Is your "cold boot issue" now solved? If so, do you think that the new drives are the key?
Lev
Quote from: MarkJohnson on 17-December-07, 14:21:23
Sorry for late post.
After setting up the HW RAID (2500YS) for booting the system still cold boots. strangely this time the reset (Ctrl+Alt+Del) doesn't seem to work. I must of did it two dozen times and it would never clear. I then just powered off after the other 2 drives on the nvidia SATA cleared and seen the HD LED light up and stay on for a few seconds(seems stuck on the 4723 checks of the drive) and then powered down and powered right back up with no cold boot issue. It has worked this way every time for the last week or so and I tested it like 20 or so times(3-4 times a day). These drives are listed as being compatible after the firmware update (and I did that already) so I guess it is either the MB BIOS needs updating or it's the way the nvidia chipset runs this setup is wacky. This is assuming the 4723 HD compatibility list is correct.
here's a summary of the drives so far.
36GB Raptors (old revision) - can take forever to boot properly and corrupted my disk in 3 days of testing (scrambled my directory structure)
105GB Raptors - Just reset(Ctrl+Alt+Del) 1-4 times after the HD LED goes solid for a few seconds. worked for two months no errors.
250GB Caviar RE(2500YS) - have to power off (power button) when HD LED goes solid. so far no problems for a week.
80 GB SATA II Hitachi Deskstar (HDS728080PLA380 - May 2005) - same as 150 GB Raptors, just a reset or four, only did a days worth of testing with no errors.
well, I was hoping for those 2500YS to work properly. Now it makes it really hard to track the problems with so many different errors and 3 different places it can go wrong 4723/nvidia/msi/HD Manufacturer. wait, that's 4. Oh boy!
Hopefully this gets resolved soon. I've already had to move this MB to my secondary system, and for other reasons than this. I didn't mind hitting the reset button to get this to run. I get the feeling that MSI has abandoned this board on us. with the new P7N being released it will be even harder to get anyone to mess with this thing.
-=Mark=- -
Mail Signatures behaving strangely since recent update to 10.5.5
Hi there
Some, but not all, of our macs have started to behave a little bit strangely since updating to 10.5.5
We use Apple Mail 3.5, we all have a set default signature which we sometime have to change depending on the circumstances. Prior to the recent updates all machines behaved in the same way. When creating a new mail the default signature appears, when you select a new signature the default one is replaced.
The new behaviour on some of the machines is that the new signature is added below the default one.
I would like all of the machines to replace the default signature.
Any ideas?
thanks for your help.
CurtisHi there
Some, but not all, of our macs have started to behave a little bit strangely since updating to 10.5.5
We use Apple Mail 3.5, we all have a set default signature which we sometime have to change depending on the circumstances. Prior to the recent updates all machines behaved in the same way. When creating a new mail the default signature appears, when you select a new signature the default one is replaced.
The new behaviour on some of the machines is that the new signature is added below the default one.
I would like all of the machines to replace the default signature.
Any ideas?
thanks for your help.
Curtis -
Games keep crashing since recent updates
Hey there,
I've had no problems before with playing games (mostly via Steam), however, since recent OS X updates I'm lucky if I can get more than 2 minutes of game time in before the game decides to freeze or crash.
Here's my EtreCheck report - any ideas how to fix it?
EtreCheck version: 2.1.8 (121)
Report generated 7 April 2015 23:15:13 BST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Late 2012) (Technical Specifications)
iMac - model: iMac13,2
1 2.9 GHz Intel Core i5 CPU: 4-core
32 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
BANK 0/DIMM1
8 GB DDR3 1600 MHz ok
BANK 1/DIMM1
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce GTX 660M - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 3 days 2:23:21
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (207.83 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Hewlett-Packard HP USB Mass Storage Device
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.mice.driver.Wireless360Controller (1.0.0d14 - SDK 10.9) [Click for support]
[not loaded] com.mice.driver.WirelessGamingReceiver (1.0.0d14 - SDK 10.9) [Click for support]
/System/Library/Extensions
[not loaded] com.mice.driver.Xbox360Controller (1.0.0d14 - SDK 10.9) [Click for support]
[loaded] com.nvidia.CUDA (1.1.0) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[not loaded] com.nvidia.CUDASoftwareUpdate.plist [Click for support]
[running] com.rosettastone.rosettastonedaemon.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.adobeupdatedaemon.plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.ea.origin.ESHelper.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.mice.360Daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[not loaded] com.nvidia.cuda.launcher.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[running] com.akamai.single-user-client.plist [Click for support]
[running] com.amazon.music.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[loaded] com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Origin Application (/Applications/Origin.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
BetterSnapTool Application (/Applications/BetterSnapTool.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Unity Web Player: Version: UnityPlayer version 4.3.4f1 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
PepperFlashPlayer: Version: 17.0.0.134 - SDK 10.6 [Click for support]
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Click for support]
CUDA Preferences [Click for support]
Flash Player [Click for support]
Trusteer Endpoint Protection [Click for support]
XBox 360 Controllers [Click for support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 791.52 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 63
Oldest backup: 2014-06-23 07:52:14 +0000
Last backup: 2015-04-07 21:49:08 +0000
Size of backup disk: Too small
Backup size 2.00 TB < (Disk used 791.52 GB X 3)
Top Processes by CPU: ℹ️
16% mds
3% WindowServer
0% fontd
0% systemstatsd
0% Google Chrome
Top Processes by Memory: ℹ️
790 MB com.apple.WebKit.WebContent
481 MB softwareupdated
447 MB Mail
378 MB mds_stores
206 MB Google Chrome
Virtual Memory Information: ℹ️
20.36 GB Free RAM
10.67 GB Active RAM
1.11 GB Inactive RAM
2.21 GB Wired RAM
44.56 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Apr 7, 2015, 10:41:48 PM /Users/[redacted]/Library/Logs/DiagnosticReports/dreadout_2015-04-07-224148_[re dacted].crash
Apr 7, 2015, 10:16:52 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Total War SHOGUN 2_2015-04-07-221652_[redacted].crash
Apr 7, 2015, 10:13:51 PM /Library/Logs/DiagnosticReports/Total War SHOGUN 2_2015-04-07-221351_[redacted].cpu_resource.diag [Click for details]
Apr 7, 2015, 10:07:03 PM /Users/[redacted]/Library/Logs/DiagnosticReports/dreadout_2015-04-07-220703_[re dacted].crash
Apr 7, 2015, 09:59:11 PM /Library/Logs/DiagnosticReports/dreadout_2015-04-07-215911_[redacted].hang
Apr 7, 2015, 09:52:10 PM /Users/[redacted]/Library/Logs/DiagnosticReports/dreadout_2015-04-07-215210_[re dacted].crash
Apr 7, 2015, 09:50:02 PM /Library/Logs/DiagnosticReports/dreadout_2015-04-07-215002_[redacted].hang
Apr 6, 2015, 07:09:39 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-04-06-190939_[redacted].crash
Apr 6, 2015, 07:03:58 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-04-06-190358_[redacted].crashTime since boot: 3 days 2:23:21
I'd reboot to clear out some temp and cache files.
Have you checked with the game developers to see if you've got the latest version that is compatible with Yosemite? -
Lots of problems since recent updates
Since the most recent updates for Mavericks and iTunes, I am having a host of problems with iTunes, and am losing my patience. If anyone can help, I would certainly appreciate it.
I have a rather large library, stored on an external drive, which I have not had problems with in the past, and this same drive holds files other than iTunes related items. iTunes has 'lost' my library twice recently, forcing me to go through great lengths to get it restored, including spending the past several days literally adding everything back into it. This morning, it did it again. After restarting my computer, iTunes, once again, came up with the message that it cannot find my library, in the very place it has been, and where it was accessing it 2 minutes earlier. The itunes library files are still there, nothing has changed, and this is now the third time it's done this since updating.
I have followed all of the recommended steps to restore the library, none of which has worked properly.
Right before restarting the computer, while I was finishing up Re-importing the last of my movies, iTunes stopped importing them. No error message, just I would drag and drop the files (these are the same movies I've had in my library and have been watching, some for years), and I got no response. Then, I tried 'Import to Library' rather than dragging, and got the same. So, I closed out, and restarted, leading me to yet another lost library. To start from scratch, to give you an idea, I have 500+ gigs of music, and several hundred movies/tv shows. I am not happy thinking that I will have to do that again.
When iTunes opens, and gives me the message that it cannot find its own library, I choose to select a library and send it back to the same spot I've been using. The library files are all still there, and yet iTunes claims not to see them, telling me there is no library file in this location. I am incredibly fristrated right now.
Please help?Verizon Wireless Customer Support wrote:
I truly understand your viewpoint MySIII. Software is definitely suppose to enhance your phone and not hinder it. Your right, our customers should not have to worry each time an update is released. I'm sorry you are having so many issues with your phone. Our suggestion to uninstall and remove apps is just to give the new update a chance to make your phone better. This works the same for apps and functionalities that were not put on your phone when released. Now that your phone is working differently other functionalities have an opportunity to work or become better. We also suggest a factory reset after large updates. Please ensure your phone information and contacts are backed up. Here are the steps http://tiny.cc/7unvuw . Please let me know if the above information helps.
KinquanaH_VZW
All I hear is Blah blah blah..First of all, I am not gonna do a factory reset, (and I know all about backing up everything). And so now you are saying that every time we get an update, we have to factory reset or uninstall all of our app and reinstall?? That is utterly ridiculous...
This Issue is NOT an app issues or a factory reset issue. Are you no reading me , or any other threads or posts about this? The update was a keyboard and camera update, so take you VZW clout and let the people that need to know, that this update sucks and they need to FIX IT...Period. No factory resets, no app uninstall and reinstalls..This is a Samsung keyboard issue (and for some reason battery draining) The Samsung stock keyboard is not app related. .None of those suggestions work.. OK. Just fix the update. So no, the above info does not help. Thanks tho. -
Cannot print a web page since recent update to Apple Snow Leopard
After recent update to Mac OS 10.6.4 I cannot print any page when using Firefox. I tried using Apple Safari and there was no problem
== This happened ==
Every time Firefox opened
== After recent update to Mac OS 10.6.4This is a Firefox printing issue that I just fixed for my 85 year old Mom (birthday present). Other people have the same problem so I'm posting the solution:
Go to address bar in Firefox--
Type in this:
about:config'''
Click I AGREE on the warning
Find -- '''print.macosx.pagesetup-2'''
'''RIGHT CLICK on your mouse'''
and go to '''RESET''' -
I have not been able to get a sound from my iphone when its in lock mode to let me know i have a text since i updated this new CRAP!!!! All this money for an iphone and i cant hear a dam thing from it. ANyone have a fix for this or do i have to live with it?
I tried what i could. Just got off the phone with apple and they had me reset my phone and now it works
Thanks for the help -
Since I updated to ios7 the sounds are off
Since updating to ios7 the background sound in apps and videos keeps becoming too loud to the point it's better muted than listening to it and in videos it sounds horrific like really really nasty cheap speakers anyone have any suggestions?
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset. -
Asset Generator broken since recent update to Photoshop CC
With this latest update to Photoshop CC, the asset generator no longer seems to support having masks on a folder - asset will NOT generate if this is the case. Seems the only work-around is to clip everything down to a shape layer, which is highly awkward. Is this a bug? Can it please be fixed? This used to work just fine and has only been broken since the most recent update.
My team is having the same issue. I'd love to hear about a fix to this.
Maybe you are looking for
-
ACR 5.x and Canon EOS 5D Mark II with FW 1.0.7 sRAW1/2
Hi, is there a ACR update in the line for the Canon EOS 5D Mark II loaded with the new Firmware 1.0.7? With the new Firmware 1.0.7 sRAW1 files and sRAW2 files will apparently show a magenta shift in darker areas. Info to the new Firmware: http://web.
-
Special characters not displaying in button label
My production environment is: Oracle Forms 6i connecting to an Oracle 8i database. Forms are Windows client/server. In a form there is a layout of buttons like a QWERTY keyboard. And in the property palette information for each data block, the item i
-
Hi there, I recently did a software update for my microsoft office 2004 on my laptop but stopped it about a quarter of the way through and now only WORD and POWERPOINT works. The EXCEL logo in the dock now has a question mark over it. Is there a way
-
Windows Migration Assitant is running on my PC; the Mac is running "Select the information to transfer" so I can't follow the instructions from Windows Migration Assitant. It seems like I should stop the new Mac?
-
Upgraded to APEX 3.0 in Oracle 10g Express, broken runtime
Hi, I'm a newbie trying to use APEX with Oracle 10g Express on my laptop. I ran the upgrade to the latest APEX version (3.x). It seems to have worked for design-time, but the run-time has broken. I gave up trying to import samle apps, and built a sim