Radio won't connect
Itunes stopped connecting to radio stations on by comuter about 4-5 days ago. The station guides are all still there. I've checked various stations just to confirm that it wasn't one specific connection, but none work. All I get is the Opening URL box saying its connecting then it disappears. Nothing ever connects.
Some of the other guys at the office are connecting with no problem to the Itunes radio feeds. We are all on the same network. Not sure why my particular machine is not letting me though. I can connect and download podcasts and store items without any problem as well. Just the internet radio seems to be having an issue.
I am getting the same problem. I can connect to the store and to everything else and outside of iTunes individual radio stations come through fine. However all the stations in iTunes go to Opening URL and then nothing happens. After a while that goes away until I click play again then it opens back up.
Similar Messages
-
MSI MEGA 533 with FM Radio won't connect on USB! Brand new from a box !!!
hello,
i'm having trouble connecting MSI MEGA 533 with FM Radio, on usb port on my computer.
I've tried to connect it on USB 2.0 port on laptop and desktop computer, with MS Windows XP SP2 installed, nothing happens. When I start player it works like a charm, i can listen to radio stations, record radio station, and record voice, but when i try to connect it to USB via cable from a box nothing happens.
I've tried to downgrade it to firmware version from cd, with a standard procedure, hold play button, start download software, connect via usb cable, and the player is not detected by computer.
PLEASE if there is a way you can help post your reply as soon as possible.
ThanksHi gagac
Try uninstalling the current driver on your computer and download the following driver.
http://rapidshare.de/files/20262928/MS5533.zip.html
This driver is a backup copy that I uploaded on rapidshare from my Original CD Rom that came with my player & I know that it works with firmware v1.00.06.
What I find is unusual is that you got firmware v1.00.06 on your player straight out of the box as it usually comes with v1.00.01 or v1.00.02.
If the above driver doesn't work, and since that you have Windows XP, you may want to try upgrading to firmware v2.00.02. NOTE: You will need to also download driver v1.672 from the MSI Website as this is the only driver that works with v2.00.02.
CARE: You may want to read the below topic first before upgrading to v2.00.02 as there have been some issues concerning driver v1.672 & v2.00.02.
https://forum-en.msi.com/index.php?topic=96066.0
Good Luck. -
I have about 20 stations on my iTunes radio and am an iTunes Match subscriber. When I listen to a new station, I'll often play for about a day or two, and then it will no longer connect. I have to delete the station and then re-enter it for the station to play again. Any idea what's up?
I can't connect either. I've upgraded to the most recent version of iTunes, restarted my DSL modem and computer and still the same message: "An error occurred while contacting the radio tuning service. Check your internet connection, or try again later." I think it's an iTunes problem.
It's been 3 days now. What's up? -
TuneIn Radio won't connect to my radio stations at my gym
Once again I'm asking about a Tunein Radio issue: I still can't get it to connect to my radio stations at my gym. It works just fine on my home WIFI, and Pandora Radio works just fine at the gym, but not Tunein! To add insult to injury, when I start Tunein it connects and plays the ad, then will not connect after that! Suggestions anyone? Sure would like it if I could use Tunein at the gym so that I can listen to my favorite local stations.
I guess I'll have to do that. Talked to them 3 months ago when I initially lost Tunein, but replaced it with Pandora and was happy with just that until lately. Guess I was hoping it was an IPOD setting or something that I could fix myself. Thanks IIIaass.
-
IPhone 4 Won't connect to car radio after up updating to iOS 7
My iPhone 4 won't connect to my kenwood stereo after updating to iOS 7.
Had the same problem connecteing with USB to my stereo.
it was suggested I do this by user lllaass
<Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.>
And it worked for me. -
ITunes won't connect to internet
I can't access the iTunes Store, Internet Radio, or download missing album art. This was a problem I had in iTunes 6 as well, I figured iTunes 7 would fix it. No go.
Under Help > Run Diagnostics, it confirms that I'm connected to the internet, but the store won't connect. I searched but found nothing that helped.
Then I figured maybe it's my college campus internet blocking, but that isn't it because all of my flatmates can access the store no problem.
Thanks for helping!
Here is the diagnostic output:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation OptiPlex GX260
iTunes 7.0.0.70
Current user is an administrator.
Network Adapter Information
Adapter Name: {E23A047C-B557-4054-8C2A-D14780E3FD9E}
Description: Intel(R) PRO/1000 MT Network Connection - Packet Scheduler Miniport
IP Address: 136.224.244.63
Subnet Mask: 255.255.254.0
Default Gateway: 136.224.244.1
DHCP Enabled: Yes
DHCP Server: 136.224.255.22
Lease Obtained: Tue Sep 12 18:31:33 2006
Lease Expires: Wed Sep 13 02:31:33 2006
DNS Servers: 136.224.32.21
136.224.32.22
Network Connection Information
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: Yes
HTTP Proxy: 136.224.141.130:8080
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.soz i was refering to chris post about the proxy server
as for you
open up the internet options
clear all cookies temp internet files etc
click on security tab
click on each internet zone and click default to each one
click the advance tab and click restore advanced settings
click ok
try again
if that dont work i cant surgest anything else other than check your filewall disable it incl the windows firewall from the security center in the control pannel (win xp sp2 only) -
hi..
i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?See this: http://support.apple.com/kb/TS1559
If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple. -
Won't Connect To Netgear Router
Hi There
I recently bought an iMac 2.0Ghz 17". It's a beauty. However, I can't seem to connect to the internet through my router. The router is a Netgear DG834PN. I've tried the usual things with it - such as installing all software updates and updating the firmware on the router, but no luck. In addition, my previous 1.42Ghz Mac Mini didn't work either, however, a different Mac Mini in the house does seem to connect through the router. My iMac will connect through an ADSL modem so it has been connected to the internet. The Mac Mini that does work I do not believe has the most recent software. Are there any things I might have missed to resolve my problem? It won't connect via Ethernet or Airport, it simply doesn't recognise the network. I've tried adding the Mac Address to the router configuration as well as removing and putting back on Encryption. No luck. Help is greatly needed!
ThanksHi Jack Shepherd!
There was a post in another thread recently where a new owner during initial setup activated the wrong radio button in answer to the question "How do you connect to the Internet?" Was thereafter incapable of manually setting up a connection. Had success with the following:
If you open the Network panel of System Preferences, click on the "Assist me.." button followed by the blue "Assistant..." button, you'll open the Network Setup Assistant which will redo that initial setup and give you a second or third opportunity to make the proper selection for that question. Give it a chance and let us know how it works.
Forget the "Diagnostics..." button at this point, as that's an attempt to "edit" your way out of the mess, and it appears that what might be needed is a fresh start. Best of luck:) -
Won't connect to itunes or charge unless its in diagnostic mode.
My ipod classic won't connect to anything. My mac doesn't recognize it, my ipod player doesn't recognize it and my car radio plug in doesn't recognize it. It won't charge unless I put it in diagnostic mode, but once its charged it will play just fine with headphones. Help! What can I do to fix it?
I also already uninstalled and reinstalled itunes again and that didn't do anything either.
-
Itunes store won't connect since upgrade to itunes 8 (vista)
ever since i upgraded to itunes 8, it won't connect to the store. it says the network has timed out after only trying for like a second. Right when i click the itunes store button, the error pops up immediately. I have vista. When i run a diagnose, it says "Internet connect verified, but then it says "secure link to itunes store failed". how do i fix this? thanks
iTunes 8 has created a serious problem with usbaapl.sys and Windows Vista, the device driver for the iPhone and possibly for every other iPod. According to my research, about 1/3 of all Vista users who have installed iTunes 8 are experiencing the problem. It caused me to have the dreaded BSOD about five times before I did a full system restore from my backup drive to get rid of iTunes 8 and go back to iTunes 7.7.1.11. The new Genius Bar apparently allows Apple to advertise more songs for you to buy while poorly putting together custom playlists based on your song choice and your iTunes music library. Pandora.com does a better job of creating custom radio stations for you for free than iTunes 8 does using its custom algorithm and your song library. iTunes 8 has now become a giant piece of bloatware. Apple should know better by now after experiencing the debacles of the MobileMe launch and the poor connection quality of the G3 iPhone. Apple now seems to be putting the bottom line ahead of all else including satisfied customers other than Apple's lunatic fanboys. Steve Jobs should know better and kick some *** at Apple's programming department.
Come on, Apple. Get back to being known for doing things right the first time.
Larry K. -
Iphone won't connect to windows 7 hotspot
Hello,
My iphone won't connect to a windows 7 hotspot (which I created in my laptop). I do find it in the iphone's WiFi menu, but it appears under devices rather than as usual WiFi coneection. When I try to connet, the following message appears: "JorgeHOTSPOT has no connection to the internet. are you sure you want to use this newwork?"
Can anyone help me to solve this.
Cheers,
Jorge.One day later: My solution
I went to the Apple Store with a Genius onliine appointment a few hours after posting this. They couldn't connect it either. One of the terminals had CORRODED. In 4 months. They replaced the phone. I think I used it in the rain once.
My comment:
I had a Radio Shack TRS-80 Model I long ago in the stone age. This was one of the first PC's and competed with the Apple model I. It connected to external floppy drives with uncoated steel terminals on the connectors. It cost $2200 in 1977 dollars, now at least $6500, because you could buy a VW for $4000 at the time. It was necessary to go over the terminals with a pencil eraser every few months to get the corrosion off and polish them up. At least they were external and you could do this in a couple of minutes. My point is Radio Shack made a computer that cost half as much as a car unreliable because they saved pennies using cheap metal connectors. Ditto with the iPhone. Apple, what are you thinking? At least please make a terminal-polishing kit, because I can't get a pencil eraser in that tiny slot to clean them myself next time. -
Hello, Wifi Experts!
Received 20 1142N AP's
19 were registered and working with the Controller code version 7.3.101.
One was DOA so we had it RMA'd.
Replacement came, with same part number.
Plugged it in into the network.
Successfully registered to the controller.
BUT ITS RADIOS WON'T TURN ON!
802.11B/G was configured 'Enabled' but its status is 'Disabled'.
plugged it on a switch where one of the working AP's is connected.
switchport configs are identical for these two AP's.
and still the radios won't turn on.
Any birght ideas, experts!!!Thanks, Leo, for your reply.
Here is the AP boot capture:
using eeprom values
WRDTR,CLKTR: 0x87000800 0x40000000
RQDC ,RFDC : 0x80000036 0x00000208
ddr init done
Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x87000800, 0x40000000
RQDC, RFDC : 0x80000036, 0x00000208
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
PCIEx: initialization done
flashfs[0]: 27 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 7427584
flashfs[0]: Bytes available: 24957440
flashfs[0]: flashfs fsck took 20 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 50:57:a8:7b:56:c9
Ethernet speed is 100 Mb - FULL duplex
Loading "flash:/c1140-k9w8-mx.124-23c.JA7/c1140-k9w8-mx.124-23c.JA7"...#########
File "flash:/c1140-k9w8-mx.124-23c.JA7/c1140-k9w8-mx.124-23c.JA7" uncompressed a
nd installed, entry point: 0x4000
executing...
enet halted
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(23c)JA7, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 29-Jan-13 05:08 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
flashfs[1]: 27 files, 9 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32126976
flashfs[1]: Bytes used: 7427584
flashfs[1]: Bytes available: 24699392
flashfs[1]: flashfs fsck took 5 seconds.
flashfs[1]: Initialization complete.
flashfs[2]: 0 files, 1 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 11999232
flashfs[2]: Bytes used: 1024
flashfs[2]: Bytes available: 11998208
flashfs[2]: flashfs fsck took 1 seconds.
flashfs[2]: Initialization complete....done Initializing flashfs.
Ethernet speed is 100 Mb - FULL duplex
Radio0 present 8363 8000 90020000 0 90030000 B
Radio1 present 8363 8000 98020000 0 98030000 0
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1142N-K-K9 (PowerPC405ex) processor (revision B0) with 98294K/32
768K bytes of memory.
Processor board ID FGL1611S3CW
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from power-on
LWAPP image version 7.0.240.0
1 Gigabit Ethernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 50:57:A8:7B:56:C9
Part Number : 73-12836-04
PCA Assembly Number : 800-33767-04
PCA Revision Number : A0
PCB Serial Number : FOC16083D27
Top Assembly Part Number : 800-33775-03
Top Assembly Serial Number : FGL1611S3CW
Top Revision Number : A0
Product/Model Number : AIR-LAP1142N-K-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:0crypt on interface Dot11Radio 0 -Process= "Init", ipl= 0, pid= 3
*Mar 1 00:00:09.975: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 1
*Mar 1 00:00:10.016: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log
(contains, 1017 messages)
*Mar 1 00:00:10.039: status of voice_diag_test from WLC is false
*Mar 1 00:00:11.080: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
to up
*Mar 1 00:00:12.158: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to up
*Mar 1 00:00:12.194: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(23c)JA7, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 29-Jan-13 05:08 by prod_rel_team
*Mar 1 00:00:12.194: %SNMP-5-COLDSTART: SNMP agent on host AP5057.a87b.56c9 is
undergoing a cold start
*Mar 1 00:00:12.246: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:12.310: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r
eset
*Mar 1 00:00:12.310: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar 1 00:00:13.310: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to down
*Mar 1 00:00:13.310: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
*Mar 1 00:00:13.500: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:21.309: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 192.168.1.52, mask 255.255.255.0, hostname AP5057.a87b.56c9
*Mar 1 00:00:31.121: status of voice_diag_test from WLC is false
*Mar 1 00:00:31.181: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:31.214: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power s
ource
*Mar 1 00:00:31.238: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:32.222: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to up
*Mar 1 00:00:32.222: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.
255 started - CLI initiated
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Aug 25 08:18:04.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 192.168.1.2 peer_port: 5246
*Aug 25 08:18:05.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
wmmAC status is FALSE
*Aug 25 08:18:06.031: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
peer_ip: 192.168.1.2 peer_port: 5246
*Aug 25 08:18:06.031: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.2
*Aug 25 08:18:06.031: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 25 08:18:06.167: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Aug 25 08:18:07.431: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Aug 25 08:18:07.475: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller Cisco
_9a:8e:00
*Aug 25 08:18:07.518: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to a
dministratively down
*Aug 25 08:18:07.519: %LWAPP-3-CLIENTEVENTLOG: SSID test added to the slot[0]
*Aug 25 08:18:07.522: %LWAPP-3-CLIENTEVENTLOG: SSID test added to the slot[1]
*Aug 25 08:18:07.534: %WIDS-5-ENABLED: IDS Signature is loaded and enabled
*Aug 25 08:18:08.517: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to down
User Access Verification
Username: Cisco
Password:
AP5057.a87b.56c9>en
Password:
% Access denied
AP5057.a87b.56c9>en
Password:
AP5057.a87b.56c9#
AP5057.a87b.56c9#
AP5057.a87b.56c9#
AP5057.a87b.56c9#sh ip int brie
Interface IP-Address OK? Method Status Prot
ocol
Dot11Radio0 unassigned NO unset reset down
Dot11Radio1 unassigned NO unset administratively down down
GigabitEthernet0 192.168.1.52 YES DHCP up up
AP5057.a87b.56c9# -
Macbook Pro won't connect to youtube or other streaming sites
Trying to connect to youtube and online radio sites to listen live through my Macbook but it will either redirect me to my 'top pages" or won't connect to the server. Every other site works fine though. Need to instal a flash player maybe?? Not sure.
Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Follow the prompts. Click Safari in the menu bar and then Quit Safari .
Restart computer. Relaunch Safari.
2. Allow Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it.
3. Delete cookies.
Safari > Preferences > Privacy > Cookies and other website data:
Press the “Remove All Website Data” button. It may take a while.
5. Turn off Extensions, if any.
Safari > Preferences > Extensions
Best. -
I had a radio station playing with my screensaver going and everything was fine for half an hour or so - I've been doing this for months and have not had problems.
Then a while later I noticed there was no sound but the screensaver was still playing. So I tried to click on the radio station again because it often stops playing and just needs to be clicked on again. No go. Tried a different radio station - no go. Tried YouTube - video played but no sound. Tried my own music - it played but no sound.
So I unplugged the power cord - plugged it back in and now ATV will not find the wifi - goes to the black screen and Apple logo. Unplugged a few times - sometimes it goes to the screen that says "no signal".
I've reset it several times now with the DOWN and MENU keys - it tries to catch but then keeps blinking.
HELP!
JudieForgot to add that I installed LION on Thursday night.
But, it WAS working fine for over half an hour then the sound just went and now it won't connect whatsoever.
I changed from HDMI 4 to 3 - still nothing.
I plugged it into a different socket, I rebooted Airport Extreme.
Is there a way to hook it up with an ethernet cable? I tried an ethernet cable from the back of ATV to the Airport Extreme, then to my iMac - didn't know what I was doing but thought I'd try <G> - but still nothing.
Very sad..............
If I call Apple support is that free - just bought my iMac a month or so ago but I bought ATV in December I think.
Thanks. -
My new iphone4 won't connect to the app store or iTunes. It says cannot connect to iTunes. But I logged into the game center and onto this web sit. I tryed some fixes on here but nothing has worked. Suggestions?
HI again Andy,
The last message had some more stuff in between the "Hello" and "Regards" - I have no idea what happened to it. But nevermind...
I started up the Mini with the modem in one usb, and the speaker system in the other (M-Audio Sonica Theatre) - I have one of the Minis that have only 2 USB (and one FireWire) ports. The firewire has the external drive connected to it.
So far, as I"m typing this, I AM able to be online and use iTunes simultaneously. (both SaFari and iTunes respond slower than if I was using only one or the other, but they ARE actually working - in addition to having Adium running) - So I think what you suggested ( that is was something wonky was the USB hub) was a correct, yet assessment.
Would you have any reccommendations for USB hubs? The only thing that I have connected to the hub under normal circumstances that would be constantly "running" would be the RadioShark (even though the Radio soft isn't playing - the blue light on the RadioShark is always on) - and the speakers naturally. Everything else is of the occassional variety - iPod Sync Cable, Dual Layer External DVD Burner, and a "pass thu" to the USB ports on my Hard Drive Enclosure (which had been unplugged before the problem was noticed). The hub I current use is the
Kensington DomeHub USB 2.0 (7 ports) Weighted Hub 33118 http://www.amazon.com/Kensington-DomeHub-ports-Weighted-33118/dp/B0002FHENE/ref= sr16/002-4275642-8664817?ie=UTF8&s=electronics&qid=1187848108&sr=8-6
which (I thought) worked better than the "throwaway" ones I had used previously.
You think it is the hub or something connected to it that may be causing the problem?
Regardless, thank you for your time, and I hope to hear from you soon.
Maybe you are looking for
-
I went thru upgrade to ios7, then a few days later there was an alert in settings, so I clicked on the update to THAT upgrade... then my phone went black... no turning off or on. So I plugged into my PC and it will only show an iTunes logo a small wh
-
Error Message when loading an ODS from an ODS
Within a process chain we are loading an ODS from another ODS. This fails with the following message: Job REQU_49HIKNN81WXVPRI80DC2TVCUF removed from periodical scheduling and terminated Message no. RSM1170 Diagnosis An end-date for the job is speci
-
How can I change the server for outgoing mail?? I only have one and it prompts me with this: Cannot send message using the server smtp.mac.com:sharrkmedia The connection to the server "smtp.mac.com" on port 25 timed out. Select a different outgoing m
-
Set Parameter Array of OTYPE_ROWID
I have tried to adds a parameter array to a database as OTYPE_ROWID. the sample codes are as follow: //Use oo4o to connect DB CString strRowIDArrayName = "U1"; long ParamRecordCount = 5; ODatabase db; db.open("DSN","UID","PWD"); OParameterCollection
-
Hi all. I am working in BW 3.5 and trying to load a flat file in to my ODS. Everything thing seems to work fine with one exception. If I have a file such as: 05, 12345, "Masters Inc.", 98765 I can load this fine because I have set my data separator