Radio won't tune to a two-digit radio station

Can anyone tune their 6th gen Nano to a xx.0 radio station?
Our gym has TVs with FM radio transmitters set to 90.0, 91.0, 93.0, 94.0, and 95.0. The idea is that people on the treadmills can choose which TV they would like to listen to just by tuning in the appropriate FM station.
I cannot manually tune my nano to any FM station ending in a zero. Can you?

OK, I think I figured it out. I should have read the manual
All you need to do is set the Radio Region to Europe or Asia. Those regions allow changing radio stations in 100kHz increments instead of the the 200kHz increments for the Americas and Australia. I don't know if changing this setting will have any ill effects, but I don't think so.
Here are the steps for setting the Radio Region (from page 44 of the manual):
To select a radio region:
1. On the Home screen, tap Settings.
2. Tap General, and then tap Radio Regions.
3. Tap your region.
A check appears next to the region you select.
Hope this helps someone else.

Similar Messages

Two I-Tunes radio stations do not play. What do I do?

Hello:
On my laptop, my two favorite I-Tunes radio stations do not play. They are DI-Hardstyle and DI-Tribal House under Electronica. When I play them, they either skip to another station or it just gets stuck saying "getting playlist." I did not used to have this problem and I don't have it on my other computer. What can I do to listen to them again? Thank you.

Since the "UPGRADE" I am unable to play my radio station that I have listened to before without problems. Now what? I am beginning to regret this iTunes 7 "UPGRADE." I am a member of the station and have always listened to it at
http://wxpnsc.streamguys.com/listen.pls
However since "iTunes 7" all I get is the station's intro. followed by NOTHING or going through the iTunes Library, following the xpn.org intro. the next song in my Library is played; the same happens when I attempt to access with Safari. Please tell me how to correct this?
iMac G5 Mac OS X (10.4.7)

I-tune trouble, won't hold a radio station?

I can't believe my mac's I-tunes is so crappy! It won't hold a radio station, keeps cutting off and won't re-connect. How do I correct this problem?

Hello melissafromcorunna,
The article linked below details a number of steps that can help get your iPod Touch working again.
iOS: Not responding or does not turn on
http://support.apple.com/en-us/TS3281
Cheers,
Allen

Radio stations in I-Tunes to Apple TV

HI all, I want to stream radio stations from i-tunes to Apple TV to play on the speakers with my stereo system. I have added the station to a playlist, they work fine on my Mac. On the Apple TV when I click on that playlist it says no music. If I add a song, it only sees that one song. Any ideas?

open the radio station and if there is not an airplay icon on the toolbar, or maybe in a pulldown from the tool bar you won't be able to do it. Why not just check to see if the same channel is available (likely it is!) directly on ATV2?

Radio stations that I've ALWAYS listened to through iTunes won't play now

Hello, I have a few radio stations that I listen to , they stream live, such as my local NPR station and WFUV from NYC. I have listened to them daily and nightly on iTunes for over a year. All of a sudden, tonight, they won't play. When I click on them in my iTunes library I get a little window that says "Opening URL" and "connecting" with a button for STOP. The window is there for a few seconds and then disappears, and I am not connected. Normally I get an instantaneous connection to my stations. Can anyone out there help me? I have Wireless DSL in my home and at work. I havn't changed anything in my iTunes. This is so frustrating!! I can listen through Window Media Player if I go to the stations website and click on that, so the problem seems to be iTunes.
Thanks for any help,
Karen
Power Book G4 1.67 GHz Mac OS X (10.4)
Power Book G4 1.67 GHz Mac OS X (10.4)

Hi...this morning when I tried the stations were back...it's the oddest thing! I COULD get other stations to stream, just not the two I always listen to. So then this morning, everything was back to normal...who knows?
Hope you can get your stations back too!
Karen

Decimal after two digit in RTF

HI,
i want to print decimal after two digit i.e., 44 must be changed to 44.00 in .rtf
I am able to print decimal after three and four digit i.e., 524 --> 524.00 , 6456 -->6456.00
I am using 0.00 format from BI PUBLISHER PROPERTY but not able to get decimal after two digit.
I want output like this :
4 -->4.00
44 --> 44.00
444 --> 444.00
4444 --> 4,444.00
Note : Output is in Excel
I hope u got my point.
please suggest me solution for this.
Edited by: 914936 on Apr 12, 2012 4:06 AM
Edited by: 914936 on Apr 12, 2012 5:33 AM

Your requirement is to get two decimal digits for all the numbers right?
This should be possible if you goto the field which you want to have two decimal digits .Right click and goto BIP properties. Here in the properties tab you should see the option to format .Select type as number and choose the necessary format.

Updated to Yosemite, no problem. now iPhoto and iMovie won't open. Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software. User ID and PW works everywhere else.

Updated to Yosemite, no problem. now iPhoto and iMovie won't open. Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software. User ID and PW works everywhere else.

I am having the same problem. I even changed my password and updated all of my security information. Now it just gives me an error and retry message, which of course also does not work. Went to support and was going to open a chat (seemed the simpler option) and received a message that my support has expired for this serial number unless I want to pay $29.00. So I chose the option to call later, which was the exact time suck I was trying to avoid. Why wouldn't the new operating system also update the apps that were already part of my old platform?

I want to pick upast two digit from variable

Hi all there
I want to pick up last two digit from a varibale whcih containt 3 digit value.
Regards
Sagar

hi this is a bit good ...
report ztest.
parameters: v_test type p decimals 3.
data: v_char type char18,
str_len type i.
v_char = v_test.
str_len = strlen( v_char ).
str_len = str_len - 2.
write:/ v_char+str_len(2).

ADF Faces 10.1.3.0.4 - two-digit-year-start has no effect?

Hi all,
I have problem with entering date with an af:selectInputDate control:
the user enters the date and on an onblur event, the adf field
automatically reformats it:
10.10.10 ->10.10.2010
10.10.60 ->10.10.1960
The user (customer) wants 2 things to change:
1. if the given two digit year <= actual year (06):
10.10.06 ->10.10.2006
otherwise
10.10.07 ->10.10.1907
2. by entering a date, adf have to be accept the date without dots too:
101006 ->10.10.2006
1.: I tried to set theconfig param: <two-digit-year-start>2006</two-digit-year-start> (or with an EL expression) in the adf-faces-config.xml but it has no effect.
Is it a totally wrong idea or is it a bug?
Any other idea?
2.: Is it possible to solve this problem with a built in control or converter? Or do i have to write my own converter?
Thanks for any help!

The exception is gone - I must have had something wrong in my classpath. However, I still see the warnings. Are those warnings expected when using ADF in conjunction with myfaces?

How to capture first two digit in a number

Hi,
I have numbers with differeent lenth in a variable How to capture first two digit??
Thanks.

Hi,
We can achieve that using the following methods:
DATA : loc_1 type string,
loc_2(2) type c.
loc_1 = '123423428340923990'.
loc_2 = loc_1+0(2).
Here you will get only the first two digits.
You can use move statement also.
MOVE LOC_1(2) TO loc_2.
If you are having mixed string with characters and digits mixed together i.e. like this 'test01test03sample01'.
You can so that using this method.
data : lv_length type I.
loc_1 = 'test01test03sample0'.
LV_LENGTH = STRLEN( loc_1 ).
DO LV_LENGTH TIMES.
*&-- Read from first string validing the numeric fields and move your first two digits to the required variable --&*
ENDDO.
Hope it will be useful.
Regards,
Sakthi
Edited by: Sakthi Saravanan C on Oct 8, 2010 6:45 PM

I am using versio 11.1. of iTunes. I created several radio stations. My "Outlaw Country" worked for a few songs. But now it won't play anything.

I am using versio 11.1. of iTunes. I created several radio stations. My "Outlaw Country" worked for a few songs. But now it won't play anything.

I'm having exactly the same problem, with this station only. Anyone?

Can't Recall Two-Digit Screensets! Ideas?

Hi,
I can't figure out why I'm unable to recall two-digit screensets other than from the Screenset menu. I'm holding down Control, have tried both the number pad and QWERTY number keys, the fn button (I'm on the new flat Apple keyboard): nada.
Any ideas? It's driving me batty.
Thanks.

It could be that the behaviour has changed, since it was a loong time ago I dealt with this.
Let me look and see how LP8 behaves here.
Hmm. I don't have 0 or control-0 mapped to anything (verified in the key commands window) and I cannot save or recall screensets 10, 20 etc. So I do not see the behaviour you describe, I see it working like the manual describes, as least so far...
Edit: Ah, I see, if you use the duplicate commands, and pick your screenset destination from the dialog, you can indeed use screensets 10, 20 etc, you just can't recall it from the keyboard...
Something's lurking at the back of my brain from mailing lists past that makes me think this was always the case - not really a bug as such just an implementation quirk...
So yes, it appears that those 0-numbered screensets are technically available, just that they shouldn't really be used because they cannot be recalled from the keyboard.

I loaded a disk yesterday, It took me 2 hours, the disk in uncompleted and I Tunes charded me two times the price of the loading, what can I do ?

I loaded a disk yesterday, It took me 2 hours, the disk in uncompleted and
I-Tunes charge me two times the price (I have to pay the dubbel for noting).
What can I do ?
I can surely desinstal I-Tunes
Yves

Yves from Brussels (BE) wrote:
I loaded a disk yesterday
Do you mean you purchased an Album from the iTunes Store?
Or you RIP'd a CD you own?

SQL*Loader - two-digit year

Hello,
Oracle 9
I'm loading data into a table using sql*loader. Included is a date field with a two-digit
year. When the data is loaded, the century for the date defaults to 20. Is there a way to
change the ctl file to set the century based on a pivot year. For example if the year
is greater than 50 then change the date so that the century is 19, otherwise the century would
be 20.
Here's data:
12345678901234567890123456789 <-- postion
0000000 <--- record 1
0010000062603DUNNING PATRI <--- record 2
0000000 <--- record 3 0010000073002BARRIS THEOD <--- record 4
0000000 <--- etc 0000000 0000000 0000000000000BANK PEOPL
Here's the ctl file:
LOAD DATA
INFILE 'S4_MST01.TST'
REPLACE
INTO TABLE mreadm.SBX_ACCOUNT_INFO
LAST_PAYMENT_AMOUNT POSITION(01:07) DECIMAL EXTERNAL ":LAST_PAYMENT_AMOUNT/100",
LAST_PAYMENT_DATE POSITION(08:13) DATE "MMDDYY" NULLIF (77:78) = '00',
CUSTOMER_SHORT_NAME POSITION(14:29) CHAR
Thanks.
Paul

There probably is a way to do it at the instant you load the data. I suggest you use a different approach.
Load the data into the table. Then execute a simple statement like:
select case when(to_number(to_char(sysdate,'YY'),99)) > 50 THEN '20' ELSE '00' END from dual;
replace the sysdate above by the name of your column and issue a simple update statement. Let me know if I confused you, I can give a more specific exmaple on updating.

Since the last update, my favorite i-Pad radio station won't play - any suggestions?

Since the last OS update, my favorite i-Pad radio station won't play - any suggestions?

Confirm that you have the latest HP software from their site.
Have you tried scanning with Image Capture instead?

Radio won't tune to a two-digit radio station

Similar Messages

Maybe you are looking for