Radius connection being rejected by server

From my Cisco 881 k9 router I run test aaa group radius server 10.20.1.10 username password legacy - -and I get user authentication request was rejected by server --
using windows 2008 as Radius server -- the IP address of Cisco Router is configured as client on server end -- Are the AAA parameters supposed to be set a certain way for access to an external Radius server for authentication?

Mar 5 09:41:05.184: RADIUS: Pick NAS IP for u=0x8524DF98 tableid=0 cfg_addr=10.20.1.250
Mar 5 09:41:05.184: RADIUS(00000000): Config NAS IPv6: ::
Mar 5 09:41:05.184: RADIUS: ustruct sharecount=1
Mar 5 09:41:05.184: Radius: radius_port_info() success=0 radius_nas_port=1
Mar 5 09:41:05.184: RADIUS(00000000): Send Access-Request to 10.20.1.10:1645 id 1645/25, len 58
Mar 5 09:41:05.184: RADIUS(00000000): Sending a IPv4 Radius Packet
Mar 5 09:41:05.184: RADIUS(00000000): Started 5 sec timeout
Mar 5 09:41:05.188: RADIUS: Received from id 1645/25 10.20.1.10:1645, Access-Reject, len 20
Mar 5 09:41:05.188: RADIUS: saved authorization data for user 8524DF98 at 0

Similar Messages

Why is my email being rejected by server

WHy is my ema il being rejected by the server

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

Emails being rejected by Server

When trying to reply or even starting a new email, it rejects the email and places it in the outbox indicating "The recipient [email address] was rejected by the server because it doesn't allow relaying."
I have three different email POP accounts and it happens on all three. I have an Iphone 4S.
Any ideas oin what I can do to remedy?
Thank you!

I ended up adding the user name and password in the outgoing server settings which showed it being optional.
I did this with all three accounts and the messahes in the outbox automatically went.
Thanks for the help.

New Godaddy sent mail being "rejected by server"?

I just received my iPad 2 last week & tried to setup my Godaddy email account on there like I have on my iphone 4.
I copied all the mail info off my iphone 4 exactly when I was setting up the new "Other" mail account on the iPad.
I am able to successfully receive emails, but when I try to reply or send them I get the following error:
Cannot Send Mail - A copy has been placed in your Outbox. The receipent "[email protected]" was rejected by the server.
So what is wrong if the iphone can send mail out of that account when all I did was copy the info to the iPad?
Thanks.

Psychedelic Wonders,
Came across your post. Hope you have been able to get it configured. In case you haven't seen these, here are the instructions we provide for iPad: http://x.co/XpNl. Make sure that you have tried other ports too. Here are some troubleshooting tips: http://x.co/XpNt. Hope this helps!
^Courtney

Reply emails being rejected by server

Wwhen responding to an email via iphone 4s i get the following message which blocks my reply "the sender address was rejected by the server"

It sounds like there is a problem with the setup of your SMTP server in your mail account on the phone. Check those settings to make sure they are consistent with what the email provider tells you. Also, include all username and passwords in the setup, as this error is generally used when you try to access a network from an outside source.

I can't update my ipod. When I check for updates it says "can't connect to server"(despite internet connection being fine). Also, when I try and update software it starts then stops after 2 seconds

I can't update my Ipod. When I check for updates it says "can't connect to server" despite internet connection being fine. When I receive a software update message;I say install and it starts updating then stops after 2 seconds. Help! (It is a 3rd gen IPod touch(I think)). Presumably as a result of this, I have tried to put my library onto my gf's new iPod touch and it just charges it..doesn't download my library onto the touch).

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information

I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information (it just shows a blank white screen with "iphone" in the centre".

I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

Messaging Server 3.5: user authentications being rejected

Using Messaging Server 3.5, user authentications are being
rejected. Why?
<P>
Messaging 3.5.2 fixes the following bug. In 3.5, the host name that
is set in the client is compared to the mailHost field in the
directory. If the client config is different from the entry in
the directory, the authentication fails. In 3.5.2, the AUTH
command compares the uid of the client (which is guaranteed to be
unique) and does not compare the host name to any value in the
directory.

Using Messaging Server 3.5, user authentications are being
rejected. Why?
<P>
Messaging 3.5.2 fixes the following bug. In 3.5, the host name that
is set in the client is compared to the mailHost field in the
directory. If the client config is different from the entry in
the directory, the authentication fails. In 3.5.2, the AUTH
command compares the uid of the client (which is guaranteed to be
unique) and does not compare the host name to any value in the
directory.

Connection rejected, the server is in a running state.

Have deployed webservice within weblogic. WLS starts up fine. Users can access the webserver, after a period of time, webservice hangs up and users that try to connect recieve this following message, I also see this in the weblogic.log
The server is not able to service the request. Connection rejected, the server is in a running state. Starting service weblogic.application.internal.BackgroundDeploymentService$WaitForBackgroundCompletion, 110 of 112. Last service weblogic.deploy.service.internal.adminserver.HeartbeatService took 2ms.
I have no idea what to do. Right now the only way to bring back the webservice is to stop the WLS process and then restart. The service can fail anywhere from within about 20 mins of WLS start-up or about within 12hrs.
Any Ideas what this error is trying to tell me.. Is there a more permanent fix other that restarting the WLS process.
Thank you

wow same case here in weblogic 10.2. But I have not deployed any EJB or JMS service . It shows in Console that "Mejb" Stateless service is running. I use https port from SSL mostly.
the error was:
The Server is not able to service this request: [Server:002623]Connection rejected, the server is in the RUNNING state. Starting service weblogic.jms.JMSServicePostDeploymentImpl, 120 of 122. Last service weblogic.ejb.container.timer.EJBTimerStarterActivator took 2ms.
The client could not connect to https pages then.
It occured for hours.
I saw a solution that said:
BEA-002623
Notice: Connection rejected, the server is in the state state.\r\n Starting service svr, num of total.\r\n Last service last took timems.
Description
Clients are trying to connect to the server before it is in the RUNNING state.
Cause
Clients are trying to connect to the server before it is in the RUNNING state.
Action
When I was not starting any service why should it say so?
I am in a big mess in my production server .
Dear oracle weblogic geeks please come forward and show your ability.
I cannot restart my server every 1 hour or 4 hour or 12 hour.
I use Jrockit 1.6
ojdbc6 driver
I also use a connection pool from with in Weblogic to test my Oracle 10.2 RAC.
let me know asap if any solution exist.

Connection rejected by server. Reason; Warning

Hello,
When I connect from FMLE to FMSS server I see warning in /var/log/messages.
Oct 23 18:44:56 post Javascript[1951]: Connection rejected by server. Reason : [ AccessManager.Reject ] : [ code=403 need auth; authmod=adobe ] :
Oct 23 18:44:56 post Javascript[1951]: Connection rejected by server. Reason : [ AccessManager.Reject ] : [ authmod=adobe ] : ?reason=needauth&user=administrator&salt=WT9Vaw==&challenge=6JSMIg==&opaque=6JSMIg==
Everything works fine. Should I be concerned about this message?
FMLE is win XP SP3 versin 3.2
FMSS is Linux RH6 version 4.0

Darius, I think you'll get a better answer in the Flash Media Live Encoder forum:
http://forums.adobe.com/community/flash/flash_media_live_encoder?view=discussions

Connection rejected by server

Hi Everyone,
i have installed FSM2 and IISwin2003 and Flash8 on the same
server,
my rtmp is : rtmp://127.0.0.1/myapp2/myapp2.flv
it works fine on local, but when a clinet tries to browse it
over same LAN , the client gets the error below :
Connection rejected by server. Reason : [ Server.Reject ] :
(_defaultRoot_, _defaultVHost_) :
Application (myapp2) is not defined.
what im doing wrong ? pls help..

It because you're using the localhost IP, where you should be
using your LAN IP.

Javascript[9970]: Connection rejected by server.

Dec 7 07:20:38 networkvision Javascript[9970]: Connection rejected by server. Reason : [ Server.Reject ] : Virtual host my domain is not available.
i cant logint to the admin console,
centos 6.4
32 gb ram
zpanel

Darius, I think you'll get a better answer in the Flash Media Live Encoder forum:
http://forums.adobe.com/community/flash/flash_media_live_encoder?view=discussions

From the day 01/04/2014, I can not even update the apps on my iPad 4 or buy via my iPad. The same happens with the iPad mini ... My internet connection being excellent. I usually can get with the devices on the Internet, the App Store, enter into any serv

From the day 01/04/2014, I can not even update the apps on my iPad 4 or buy via my iPad. The same happens with the iPad mini ... My internet connection being excellent. I usually can get with the devices on the Internet, the App Store, enter into any service of any Cloud Apps. But I can not update or buy apps App What is happening?

You shouls be seeing this (tap to enlarge image)

My iMac says my iCloud mail account is off line and is refusing to go online my calendar is not being able to connect to the iCloud server. Any help would be greatly appreciated by this silver surfer ;o)

My iMac says my iCloud mail account is off line and is refusing to go online - Ok I rarely use iCloud mail but now the problem has spread to my calendar, which has frozen stating it is connecting to the iCloud server (for the past 8 hours).
Any help would be greatly appreciated by this silver surfer.
Peter

Calendar.
Calendar Troubleshooting
Calendar and iCal Troubleshooting - Advanced
Calendar and Contacts Syncing – Advanced Troubleshooting
Mail/Preferences/Accounts/iCloud/Advanced - try changing Authentication to Apple Token.
Mail Troubleshooting

Outgoing mails are either being rejected or not being delivered - Exchange 2010

Mails sent out to some domains not being delivered or being rejected;
Receiving different errors as below:
1.
B6.7host.com rejected your message to the following e-mail addresses:
'[email protected]' ([email protected]) <mailto:[email protected]>
B6.7host.com gave this error:
unknown user <[email protected]>
A problem occurred during the delivery of this message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: exchsrv.mydomain.com
[email protected]
B6.7host.com #550 unknown user <[email protected]> ##
====================================================================================
2.
Diagnostic information for administrators:
Generating server: exchsrv.mydomain.com
[email protected]
#554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain ##
[email protected]
#554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain ##
[email protected]
#554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain ##
======================================================================================
3. --9B095B5ADSN=_01CF0B73B41F3F480004B263dub0?omc1?s26.du
Content-Type: message/delivery-status
Reporting-MTA: dns;dub0-omc1-s26.dub0.hotmail.com
Received-From-MTA: dns;DUB127-W1
Arrival-Date: Mon, 27 Jan 2014 03:18:13 -0800
Final-Recipient: rfc822;[email protected]
Action: failed
Status: 5.5.0
Diagnostic-Code: smtp;550 #5.1.0 Address rejected.
==========================================================
For No. 2, I m seeing that the DNS name is not resolving. How can I be sure this issue is not from my side ?
For No. 3, It seems to be some problem from that domain itself, and even mails from outlook.com are being rejected.
Is there any best practice that I am missing out on ?
How can these issues be resolved ?

MX record of ju.ahg.com.sa seems to work via SMTP testing.
This was useing the MXtoolbox site.
Connecting to 78.93.11.251
220 [874 ms]
EHLO MXTB-PWS3.mxtoolbox.com
250-S-34-8.AHGJU.COM.SA Hello [64.20.227.133]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-XXXXXXXA
250-XXXXXXXXXXXXXB
250-AUTH NTLM
250-XXXXXXXXXXXXXXXXXC
250-8BITMIME
250-BINARYMIME
250-XXXXXXXD
250-XXXXXXE
250-XXXXF
250 XXXXXXG [858 ms]
MAIL FROM: <[email protected]>
250 2.1.0 Sender OK [858 ms]
RCPT TO: <[email protected]>
550 5.7.1 Unable to relay [5897 ms]
MXTB-PWS3v2 10390ms
Seems to be ok, sent a test message to [email protected]
and it seems to have gone through from were I am.
Check your Exchange Servers DNS settings.
Also, please let me know if you have a Edge server setup OR have your SMTP connect setup to use Smart Hosting.

Radius connection being rejected by server

Similar Messages

Maybe you are looking for