Radius Dictionary file conversion from free radius/steelbelt to cisco acs

Does anyone have a tool or have experience converting a free radius dictionary file to cisco acs radius format.

The key is to get all of the information needed. Normally when they say it takes too long for the client to answer that is not always the exact fault.
You may seem to get that answer if the ACS is taking a long time to process the request and the switch or client has basically timed out its requests.
The information needed is the following
all of these items really need to be gathered at the same time
switch debugs including
debug radius
debug aaa authen
debug aaa accounting
sniffer capture between the switch and the ACS
logs from ACS with debugs enabled.
If you are going to AD on the backend you may also want a sniffer capture between the ACS and the AD
all of these together should tell you where the delay of failure lays and then at that time some changes can be suggested

Similar Messages

  • File conversion, from .mpg files to useable files for iMovie on new MacBook

    i wasnt really sure where to post this, but since my end goal is to be able to use all my videos for editing on iMovie it seemed like the best place, i have many .mpg files that i would like to simply convert to a file of equal quality that iMovie will recognize, theres pages and pages of converters on google but they either are trial versions that will leave water marks or there are websites that will only convert files up to 100mb, i just need a simple converter for the videos i have, i dont want to spend 50 bucks on software that ill only use once and i obviously dont want water marks or a decrease in quality, if anyone has any suggestions that would be great.

    You want MPEG Streamclip: http://www.squared5.com/svideo/mpeg-streamclip-mac.html which is a free download.
    If your movie is an MPEG-2 or VOB file (i.e. from an unencrypted DVD), you also need the MPEG2 Playback Component from Apple: http://www.apple.com/quicktime/mpeg2/ which costs US$19.99

  • File conversion from text to CSV on present server without using GUI FM

    Hi Folks,
    This question may sound a bit weired but here it is. I have to convert a text file to csv using a SAP ABAP Report.
    The file is located on the presentation server and I am using FM's <b>GUI upload</b> and <b>GUI download</b> to do the same as the number of fields change and we perform some operations on the data coming from the text file. Actually, the csv file is supposed to act as a source system for SAP BI.
    Now my question is is there any other way by which we can do it without using the above function modules.
    Thanks
    Varun

    Hi,
    You upload the Text file using GUI_UPLOAD and now you will have the records in the internal table and then use GUI_DOWNLOAD to download the file in CSV format.
    Thanks
    PK

  • Problem with file conversion from version 9.2.2 to version 10.1.0.71

    Hello everyone.
    I have a problem. In my database, i have a lot of artwork done with indesign 9.2.2. Since a while now I upgraded indesign and now I have the latest version 10.1.0.71 but I can't open my indesign artwork made with indesign 9.2.2.
    When I try, a dialog box appear and says : " La conversion a échoué : les données du fichier ne correspondent pas aux données attendues".
    What should I do ?
    Thank you in advance

    Hi,
    Ideally all files created in 9.2.2 should open fine in versions greater than itself.
    Did you happen to have some 3rd party plugin in 9.2.2 which is missing in 10.1 ? That can be one of the reasons for such errors.
    Are the files still opening in version 9.2.2? (assuming you still have 9.2.2)
    If there are no 3rd party plugins involved you can share the file with us at [email protected] and we can have a look and figure out the cause of the problem.
    Regards
    Javed

  • File conversion from lv 3.1 to lv 2012.0.1

    Hello,
    Could anyone convert the file attached on LabView 3.1 to a more recent version of LabView?
    I have recieved that file in order to be able to control the potentiostat Solartron SI 1287 with a GPIB.
    Thank you very much.
    Laura

    Look at the top of the LabVIEW forum.
    Need to have a VI converted? Please post to the Version Conversion board.

  • MOV File Conversion from Mac to PC

    I have some footage shot in HD and imported into Final Cut Pro on a mac. When I take the MOV files and put them on my PC, the audio is all messed up. It repeats in places, cuts out in others, and is off by a second or two in other places. Another PC I tried to view it on only plays the audio, which sounds good, but the video is entirely missing. I've tried VLC media player and Any Video Converter on the PC.
    I imagine your answer will be to change some settings in Final Cut Pro and save or export the files. That is fine if it is the resolution, but I'd rather fix it on the PC side because my camera guy is the one with the MAC and FCP. I have a PC. I don't care what file format the files end up on the PC. MOV, MPEG, AVI, would all be fine.

    *When I take the MOV files and put them on my PC, the audio is all messed up.*
    Let's start with the pixel size, frame rate, and codec of this movie file.

  • Flat file conversion from source to destination

    Hi
    I'm new to SAP and was wondering if someone could help me with the following:
    Have a source text file (fields are FirstName and LastName) and would like to run it through PI and get an output as a flat file with the FullName and LastName concaternated.
    Example:
    SourceFile.txt:
    Jason
    Gates
    TargetFile.txt:
    Jason Gates
    The mapping is working if I test it using the test feature in Enterprise Services Builder's test mapping feature without any files.
    How can I execute the mapping using plain text flat files?
    Thanks in advance!
    Additional information:
    Source file has structure:
    First Name
    Last Name
    Target file has structure:
    Full name
    The object is to:
    u2022  Create data, message, service interface structures for source and target to represent the source and target.
    u2022  Create the mapping program between source and target.
    u2022  Test mapping works internally in the builder using the internal test facilities.
    u2022  Configure the directory to pick up the source file, and content covert to xml using sender file channel
    u2022  Configure receiver determination, interface determination, receiver agreement, and target file channel
    u2022  Test using files place on the file server
    u2022  Trouble shoot using the runtime work bench.
    u2022  Once this work, increase the complexity e.g. multiple people in the source file, etc
    Edited by: NetSpike on Feb 17, 2010 2:25 PM

    https://wiki.sdn.sap.com/wiki/display/XI/FLATFILETOFLATFILE

  • File Conversion  From XLS  format to TEXT format

    Dear All,
    Could You please let me know if there is any standard program that can be used to convert XLS format input file to TEXT  format..Other wise could you provide me a code for that .
    Thanks & Regards
    Avik.

    Hi,
    Upload Excel file and download GUI_DOWNLOAD as txt file.
    Regards
    Md.MahaboobKhan

  • [Cisco ACS] 11036 The Message-Authenticator RADIUS attribute is invalid

    Hi,
    I got many Cisco AP which are linked to 2 Cisco WLC.
    On each WLC, I configured a primary and a secondary RADIUS Server.
    RADIUS servers are Cisco ACS 5.2.0.26 (patch 10)
    Primary and secondary ACS configurations are synchronized.
    There are no problem between primary WLC and Cisco ACS (primary and secondary).
    When secondary WLC requests primary Cisco ACS, I get this error "11036 The Message-Authenticator RADIUS attribute is invalid"
    Secondary WLC automatically contacts secondary Cisco ACS and it works fine.
    Cisco ACS description for this error: "This maybe because of mismatched Shared Secrets."
    The two Cisco ACS are synchronized so I should have same error on them...
    Why does primary ACS generate this error?
    Thanks for your help,
    Patrick

    Tarik Admani wrote:Amjad,That is a good observation, shouldnt 7.3 (which recently released) help put these types of issues to rest? I hear that the configuration can now be replicated from one controller to the next in a failover setup.Thanks,Tarik Admani
    *Please rate helpful posts*
    Yes. That is a good point.
    With 7.3 you can use high availability (HA) between two WLCs and you can configure only one WLC (the primary) and all the configuraiotn can be replicated and synched to the other WLC (the secondary).
    The two WLCs in the HA must be on same subnet though. Otherwise hot-standby HA between WLCs can't be used.
    Rating useful replies is more useful than saying "Thank you"

  • Free Radius

    I want to install Free Radius for my wireless. I went to the site and I couldnt find a windows version. Only linux
    Is there a windows version and if so where? Also Would anyone strongly recommend using the linux version over windows?

    im trying the MD5 just learn about the config files.
    Im following this http://wiki.freeradius.org/EAP/MD5_HOWTO
    I'm having problems with this part
    "Assumptions:
    * You have a server that starts without any errors when doing radiusd -s -X
    * You have at least one properly configured client (i.e. Access Point, AP)
    * You have at least one configured user and your radtest user password 10 secret'' works from a test host (e.g. localhost), i.e. you receive an Accept message from your server"
    making the radtest: Would I put this in the users.config file?
    radtest Auth-Type := Local, User-Password == "secret10"
    radiusd -s -X? I'm using the windows version to learn. Its intalled on my desktop. I don't think I need this part.

  • I open a donwloaded file from an e-mail and a file conversion box appears.The characters are all wierd.

    I can not open a downloaded file from an e-mail or off the web w/o a file conversion box popping up.It shows options to open with msoffice word but I choose that and it opens with all the characters that are weird looking. There is also the issue where every time I open up Mozzila there are portions of advertisements that look like they are in Japanese. I go to the View in the top bar then select Character Encoding.The unicode is selected so I switch to Western (ISO-8859-1) and everything is normal. I close the browser and restart and it goes back to the way it was with the Japanese looking text.

    You can convert the PDF text to regular text (.txt) and then import/open into another program and make your changes, then save the file in the programs format (for your later editing) and then choose Print from the program and there may/may not be a option to save as PDF again.
    You'll need a free (limited use) PDF to text utility like
    PDF OCR
    http://solutions.weblite.ca/pdfocrx/
    Trouble here of course is you lose all the formatting and have to reformat, but it's a lot less expensive than Adobe's software.
    LibreOffice is free to use and can save as PDF format if iWork doesn't save as PDF, it should unless Apple is really peeved at Adobe.

  • SPARC v240 can i install Solaris 10 and free Radius proxy software?

    On a SPARC v240 can i install Solaris 10 and free Radius proxy software?

    No, the patch was created on top of Solaris 10 packages. The patchadd utility requires that the VERSION strings match between the installed package's pkginfo file and the pkginfo files inside the patch. Unless the base package did not change between Solaris 9 and Solaris 10, the patch will not get applied because of the VERSION mismatch. But it is very unlikely that the packages did not change between the two releases.
    Even if you were to be able to install it, there could be dependencies that the patch's binaries have on other Solaris 10 binaries.
    -- Alan

  • Cisco AAA and Free Radius enable secret failure

    Hi,
    I am currently testing aaa authentication with free radius.
    I can authenticate users through the radius server, however i cannot authenticate the enable secret.
    Here is the router configurations
    aaa new-model
       aaa authentication login default group radius local
       aaa authentication login localauth local
       aaa authentication ppp default if-needed group radius local
       aaa authentication enable default group radius enable
       aaa authorization exec default group radius local
       aaa authorization network default group radius local
       aaa accounting delay-start
       aaa accounting exec default start-stop group radius
       aaa accounting network default start-stop group radius
    radius-server host 192.168.0.135 auth-port 1812 acct-port 1813 key cisco
    I have created a user for the enable secret as such:
    $enable15$   Auth-Type := local
            Service-Type = NAS-Prompt-User
    The router cannot authenticate when logging for priviliged mode. I cannot find any log on the radius server as well.
    PLease help.

    It should be $enab15$ as the user that IOS sends to the radius server.
    Sent from Cisco Technical Support iPhone App

  • SSL VPN IP Address Assignment from IAS radius server

    Can I use SSL VPN IP Address Assignment from IAS radius server?it can be done with acs server.are there some differ from the acs and IAS?

    Hi,
    I will suggest to setup a sniffer capture with ACS and look for the attribute that ACS sends for IP Address Assignment, once you know the attribute apply it on the IAS.
    If you have any question do not hesitate to contact me.

  • ITunes will no longer play nor add to the library any mp3 files which I have created by conversion from a wav file.

    I am running iTunes 10 on XP Pro and it will no longer play those mp3 files which I have created by conversion from wav files.  I tried to delete some from the library and then re-add them but iTunes will not add them back to the library.
    Can anyone help solve this, please?

    Back up your purchased music before you upgrade, I've read at least 5 cases where purchased music has just gone.....missing.
    That is not supposed to happen, didn't happen to me or thousnds of other iTunes users, but you don't want to be the 6th person, do you?
    There are two things to try before you upgrade:
    Barbara Hall, "Unknown Error (-208)" #1, 07:42pm Oct 19, 2005 CDT
    http://docs.info.apple.com/article.html?artnum=302478

Maybe you are looking for