Radius of Apple TV 3 corners

Can anybody help with the radius of Apple TV 3 corners in mm?
Thanks
David

Correct, but that isn't something that would normally be available. You will have to calculate it. What is it that you're trying to accomplish?

Similar Messages

  • Border-radius is not working in FireFox 4.06

    I am a web developer working in HTML 4/HTML 5 and CSS 2.1 and CSS 3. If I use the following piece of code so that Firefox gives rounded corners to images and boxes, I get a validation error from W3C. The piece of code is as follows "-moz-border-radius:", but if on the other hand I change the code to "border-radius:" I get beautiful rounded corners in Opera, Safari and Internet Explorer 9 "beta" with no markup validation problems with W3C. Is there a way to rectify this problem in Firefox before the full software is made available across the globe?

    This got fixed in Firefox 4.0 beta 7 (Gecko 2).
    The vender prefix can be dropped now!

  • CSS rounded corners in IE

    HEy does anyone have a solution for making rounded corners in internet explorer? border-radius works fine in all rowers except IE.

    ok i did the HTC part and found and downloaded one. but i dont know how to upload the HTC file::::
    Use an htc file in order to 'enable' rounded corners.
    This is the preferred method for simple layouts as it 'enables' the older versions of IE to render rounded corners without the use of IECC's, (IE Conditional Comments) as the file 'contents' will be ignored by IE9. I would however advise the use of IECC's when using this or any other method as not only does it enable one to 'isolate' any pre IE9 specific code. but removes the limitation of having to apply a single border-radius value to all the corners. (see note below).
    any help with the htc?

  • Rounded Corner Text Box in iWeb 2.0 - just like this site

    As you can see on this very apple site the corners of its main boxes are rounded. In iWeb you can't make your text box rounded unless you place your text in a rounded corner shaped box. However for formatting purposes the shaped box won't expand or contract as you see your site on different browsers because it is saved as either an image.
    1. If you place text directly in a shape it publishes as an image with the text not able to be highlighted or searched.
    2. If you place a text box over a shape. The text will not adapt to the boundaries of the box. So if you view you site on the web it is possible for your text to go outside the boundaries of the box. This is not good.
    3. I tried creating a rounded png box with transparency that I then made as the background image for a text box. The corners showed properly on iWeb but once published the rounded corners showed properly when there was no drop shadow applied to the text box. With a drop shadow the corner squared off to display some of the background corner. I know this is not the clearest -- forgive me.
    4. You can add a picture frame to a text box which expands and contracts so why not simply be able to add a rounded corned picture frame to a text box.
    Finally, the simple solution to me should be that the text box should be capable of being rounded. I know why iWeb doesn't do this because rounded corners are complex. I know because I've designed sites with Dreamweaver and GoLive.
    I hope they add this to the iWeb in an update. You'd think they'd have a template similar to their own site which has rounded corners.

    The rounded corners are images.
    [TopLeft|http://discussions.apple.com/images/header.gif] & [Topright|http://discussions.apple.com/images/header_rightcap.gif]
    [BottomLeft|http://discussions.apple.com/images/bottom.gif] & [Bottomright|http://discussions.apple.com/images/bottom_rightcap.gif]
    You want prefab solutions.
    Web design is also about finding solutions yourself. It's part of the creative process.
    The textboxes are <div> elements in the final result. W3 CSS does not specify rounded corners, but [it is possible in CSS3|http://www.w3.org/TR/css3-background/#the-border-radius].
    Safari supports the +-webkit-border-radius: 10px;+ style.
    You can see it on [my custom webpage|http://myworld.webhop.org].
    So, if you have the knowlegde, you can apply what you want with a HTML snippet.

  • Firewire 800 conflict with Firewire 400 port

    hi everyone,
    i've been having an issue with the firewire ports where they can't be used simultaneously. when my camcorder is attached via FW400 and an external harddrive is attached via FW800, i can not simultaneously capture footage from the camcorder and save to the external harddrive. i went to the genius bar and the geniuses say that it is because both ports run through the same bus.
    i was wondering whether other people have this problem but also more importantly, whether anyone has gotten apple to correct this problem. i read on one discussion board somewhere that someone sent their computer back to apple and had it fixed but i want to figure out whether this is hearsay. i know it is possible to just buy a PCI card with additional ports (and/or daisy chain the peripheries together which i don't want to do) but i find this rather difficult to accept after dropping $2K on a system that i assumed would meet my video editing needs.
    please let me know!
    thanks so much!

    Apple have cut corners and stuck both firewire inputs on the same bus. I actually think this is true for the mac pro too. To be honest not everyone has bandwidth issues, but I am having a nightmare at the moment with a F/W400 audio device and F/W800 HD.
    If it is a bandwidth issue then the only solution is to get an express card. I would recommend trying this set-up first to see if it helps. Mac -> F/W 800 HD -> Cam

  • Iphone6 not charging ... Charging port not working

    I Bought iPhone 6 recently and it started acted funny with charging. It would charge only if I pally pressure on the cable at certain angle. Then I tried changing cables to even new ones and the pproblem did not go away. Then I visited the Apple strore, who tried cleaning it but no difference. I have been using iPhone products for over 6 years and never had this problem. The Apple Store then offered to replace the phone for $299 +taxes. Very disappointed that I am asked to pay such hefty amount for none of my fault. I am not sure if apple has cut corners and made cheaper quality product as I have seen several in the forum facing similar issues with charging . If anyone have suggestions on how to avoid such hefty price for replacement, you are welcome. I bought the phone on Jan 15,2015 and sad to know that it stopped working in three months. I am an average user and I handle the phone very gently. If no suggestions then probably it time for me to switch to non apple smart phones.

    This is a user-to-user tech support forum.  If you have a broken Lighning port, there's nothing anyone here can do about it.  There are no user serviceable parts in iPhones, and any attempt to do so, even opening the iPhone case will revoke any further service from Apple and availablity  of an out of warrant replacement. (You would have to buy a new phone at full price.)
    The iPhone warranty doesn't cover physical damage.
    Very disappointed that I am asked to pay such hefty amount for none of my fault.
    How could damage possibly be your fault?  I've never heard of owners damaging their phones.
    You can try an independent iPhone repair center at your own risk - the same conditions apply as fixing it yourself.
    If no suggestions then probably it time for me to switch to non apple smart phones.
    Suit yourself.  No one here cares what products you buy.

  • ISE profiling policy

    hi forummers'
    i would like to ask i can create profiling policy in order to reduce overall load generate from policy service node.
    example
    Workstation
    - unique atrributes : MAC address
    - probed used        : RADIUS
    - collection method : RADIUs authentication
    Apple iPhone
    - unique atrributes : OUI
    - probed used        : RAIUS
    - collection method : RADIUs authentication
    Thanks
    Noel

    Noel,
    Can you please describle how you want to reduce the load on the policy service node? To create a profiling policy for workstations the mac address should work however for the apple iphones you will need more than just the apple OUI since the macbook, ipads and imacs all share the OUI for apple, you will need to use either the http user agent string to detect this is the OUI, and that is done by setting a default rule to the redirect page so this can happen.
    Let me know if this what you are looking for.
    Thanks,
    Tarik Admani

  • The iphone could not be updated. An unknown error (occured 4005)

    I have a problem with updating my iPhone 5 to IOS7. Everytime I go to update the iPhone to IOS7, I get this "The iphone could not be updated. An unknown error (occured 4005)" error. It stays stuck at "waiting for iphone" then the 4005 error pops up after like 10-15 minutes of "waiting for iphone".
    Also it leaves my iPhone in the "connect to itunes" screen after the error pops up. And when I try turning the iphone on and off and restarting it, the iphone still stays stuck at the "connect to itunes" screen and I have to use software to unlock the phone so I can actually use my phone.
    The screenshot of this problem is below. Someone help, my itunes is updated to the latest version as well.

    I've got a similar problem only mine says unknown error (2001). During the initial installation of this months update a USB cord plugging in the iTunes icon showed up on the screen. It stayed there for about 2 minutes and then the iPhone rebooted. It repeated this cycle more times then I can count. I'm happy to say that it is now working. But non the less I've been pretty frustrated with the iPhone and Leopard sometimes.
    In response to a comment that it seems that every iTunes related software update seems buggy I would have to say that I agree. I've been using Macs since 1987 and I have to say that in past 3-4 years Apple has changed a lot. It's more popular then ever before. It's products are even more stylish and innovative then ever before. But the rising demand for Macs has forced Apple to cut corners it seems. In some ways Apple products aren't what they used to be.

  • .mp4 versus .m4v

    I posted this question under another topic, but I think it's more appropriate to stand alone:
    This is interesting! I have two different versions of a TV show I downloaded through bittorrent.
    One has a .mp4 suffix and its format (as revealed by quicktime's "show movie info") is H.264 320x240, Millions, AAC, Stereo (L R), 48 kHz. 23.98 FPS, 349 kbits/sec data rate, 105 MB size.
    The other has a .m4v suffix and its format is AAC, Stereo, 44 kHz, H.264, 320x240, Millions. 23.98 FPS, 593.89 kbits/sec data rate, 178 MB size.
    Despite the different suffixes, it seems these two files are identically coded (both H.264, both AAC audio, both 320x240). Yet only the .m4v file will transfer and play on my iPod. Is this normal & expected behavior?

    I'm no expert on this but I think Apple would have cornered the market with the.M4V by only letting the iPod play that type and that type alone? That why QT Pro has the export to iPod option? Again, I'm not sure though.

  • IPad rolled off my car at 50km/h...and LIVED!

    I have an iPad 64gb WiFi.  Left it on top of my car when I left work, found it a half km away in the side if the road, fully intact!  I had it in a small envelope with no padding!  That's why I love Apple!
    The corners are all banged up, by the dock connector the digitizer is slightly elevated, home button kinda works, wifi is very limited.
    Anyone know where I can get a legitimate replacement back cover?  I want to get the original apple one, and all I find is no name ripoffs!!

    I have an iPad 64gb WiFi.  Left it on top of my car when I left work, found it a half km away in the side if the road, fully intact!  I had it in a small envelope with no padding!  That's why I love Apple!
    The corners are all banged up, by the dock connector the digitizer is slightly elevated, home button kinda works, wifi is very limited.
    Anyone know where I can get a legitimate replacement back cover?  I want to get the original apple one, and all I find is no name ripoffs!!

  • Bridging a WPA2 Enterprise Radius Server (Lion Server) to Apple TV

    Hello,
    I was wondering if anyone can help me out with this setup that I have with Lion Server. Recently I set up my Airport Extreme to use Radius and bind it to my Lion Server for Authentication. Radius works with most of my devices, except for my ATV2 (which is in a different room from the AIrport Extreme.) As most of you may know, ATV2 doesn't support WPA2 Enterprise networks.
    Ideally what I would like to do is have the Apple TV connect to my wireless network for all of my videos that are shared on a HD connected to my Lion Server. I was thinking about looking for a WPA2 enterprise wireless bridge with an Ethernet port so that I can connect the ATV to the bridge and have the bridge connect to my Airport Extreme. However, here is what I can not figure out. How can I get that bridge to authenticate to the Radius Server on Lion Server? From my understanding the Radius service on the Lion Server uses its own proprietary radius server to where I couldn't get the bridge to cnnect.
    Please let me know your thoughts. If it helps, I have a 1st generation TC that I can place in the other room. However, I couldn't see any functionality in Airport Utility that would allow me to bridge that box to the WPA 2 Enterprise network.

    Hello,
    I was wondering if anyone can help me out with this setup that I have with Lion Server. Recently I set up my Airport Extreme to use Radius and bind it to my Lion Server for Authentication. Radius works with most of my devices, except for my ATV2 (which is in a different room from the AIrport Extreme.) As most of you may know, ATV2 doesn't support WPA2 Enterprise networks.
    Ideally what I would like to do is have the Apple TV connect to my wireless network for all of my videos that are shared on a HD connected to my Lion Server. I was thinking about looking for a WPA2 enterprise wireless bridge with an Ethernet port so that I can connect the ATV to the bridge and have the bridge connect to my Airport Extreme. However, here is what I can not figure out. How can I get that bridge to authenticate to the Radius Server on Lion Server? From my understanding the Radius service on the Lion Server uses its own proprietary radius server to where I couldn't get the bridge to cnnect.
    Please let me know your thoughts. If it helps, I have a 1st generation TC that I can place in the other room. However, I couldn't see any functionality in Airport Utility that would allow me to bridge that box to the WPA 2 Enterprise network.

  • Case design guidelines missing corners/radius dimensions

    Trying to design cases for iPhone 5 and 5c. Most dimensions are outlined clearly in Apple's case design guidelines. But the corner radiuses are conspicuously missing. Seems all the community advice I find is to measure it yourself... Being a risk averse perfectionist, I am looking for something more precise, if available. It must be out there, and think it could help quite a few with same dilemma. Anyone?

    Click on 'Nokia Support' at the bottom of this page..then again on 'Contact Us' under 'Support' ..and then select the 'Channel' you want ..
    Attachments:
    Nokia Support.png ‏117 KB
    Contact Us.png ‏85 KB

  • I have an apple Iphone 5s and i'm facing a problem. Sometimes when i unlock my phone with passcode or finger tip my screen goes white around the corners. Please advice what kind of issue is this.

    I have an apple Iphone 5s and i'm facing a problem. Sometimes when i unlock my phone with passcode or finger tip my screen goes white around the corners. Please advice what kind of issue is this.

    Sounds like a hardware issue.  Bring the phone to Apple for evaluation.

  • Radius corners in IE8

    I'm designing a site in Muse and it works fine in all browsers except IE where the radius corners change to square corners – but only in some instances. And within the text 'L' shapes appear between words. I cannot see a reason why these are appearing as it's plain text there's no special characters or fonts. Again this only happens in IE.

    I'm designing a site in Muse and it works fine in all browsers except IE where the radius corners change to square corners – but only in some instances. And within the text 'L' shapes appear between words. I cannot see a reason why these are appearing as it's plain text there's no special characters or fonts. Again this only happens in IE.

  • Connecting Windows 7 to Apple Radius server

    Anyone know how to get a windows 7 machine to connect to an apple radius server? My macs work great and authenticate perfectly, but my windoww boxes won't connect at all.

    Please check out the following Apple Support article for details on how to access a HDD attached to an AirPort Extreme Base Station (AEBS) from either a Mac or PC.

Maybe you are looking for