RADIUS SecurID .. works from one iChain, not from the other

I have two iChain appliances, one running iChain 2.2, the other running
2.3. Both are configured with a SecurID authentication profile which
uses a Novell RADIUS server (NetWare 6.5 SP1) to forward tokens to our
ACE server. This works perfectly from the iChain 2.2 server but not
from the 2.3 server. Both are configured identically.
Any idea what could be wrong?

Are both of your iChain servers using the same RADIUS server? If they are,
do you see an "access-reject" message on the RADIUS server console when
users try to authenticate through your iChain 2.3 server? If you do see an
access-reject message, what is the error code or error message associated
with the access-reject?
If you're not getting access-rejects from the RADIUS server, then your
problem is most likely in your iChain configuration. You'll probably have
better luck asking in the iChain forum in this case.
>>> Doug Black<[email protected]> 08/24/04 8:57 AM >>>
I have two iChain appliances, one running iChain 2.2, the other running
2.3. Both are configured with a SecurID authentication profile which
uses a Novell RADIUS server (NetWare 6.5 SP1) to forward tokens to our
ACE server. This works perfectly from the iChain 2.2 server but not
from the 2.3 server. Both are configured identically.
Any idea what could be wrong?

Similar Messages

  • How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

    I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

    In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account.  The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
    Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
    Ernie

  • When creating a "lookup" column be able to display not only one column from the other list, but additional columns

    With the lookup technique, it is possible to select an item from another list and display one column of this item
    It is obviously possible to create several lookup columns on the same list and therefore display several columns
    There’s a high risk of not selecting the same item and therefore have inconsistent columns
    The Requirement therefore consist of being able of displaying several columns of the same item from the other list, based on one unique selection
    Example:
    In list(x), define lookup column on list (y), column Title (possible today)
    Then define a “secondary” lookup column on same list, column Code
    The effect would be that when selecting an item from list (X), both Title and Code would show up consistently in 2 different columns of list (Y)
    All possible solutions are welcomed

    If you are using SharePoint 2010, you can retrieve additional columns when adding a Lookup. If you are using 2007, there is no direct OOTB way, but the following two posts provide potential work-arounds:
    https://www.definitivelogic.com/blog/microsoft-sharepoint-2007-pulling-column-data-one-list-another-based-common-list-field
    http://stefan-stanev-sharepoint-blog.blogspot.com/2010/11/sharepoint-2007-associated-lookup.html
    Dimitri Ayrapetov (MCSE: SharePoint)

  • I have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....

    i have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....

    If you double tap the home button, and then swipe your finger to the right, make sure you DO NOT have the Lock Orientation button enabled.
    You know it is disabled if there is no padlock in the middle of the icon.

  • Hey mine avg link scanner is not working from the day i installed firefox 4 ....how to fix it plz help ?

    hey mine avg link scanner(add-on) is not working from the day i installed firefox 4 ....how to fix it plz help ?
    it was working fine with firefox's previous version ? but i like the interface & looks of firefox 4.......so i didnt want to swicth to 3.6 help me ?

    if i reinstall that avg antivirus then is this will fix my problem

  • Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

    Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
    My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
    Only the option "connect to wlan" is succesful.
    With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
    With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
    My notebook is a MacBook pro.
    Any idea????
    Thank a lot in advance!
    Kind regards
    Ingo

    Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
    That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
    Apple - AirPort Extreme - Feedback
    If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
    The "catch" here is that you must have an Apple router providing the network to be extended.

  • We upgraded to Mavericks on two computers at work, and now Favorites from one computer show, while Favorites from the other don't. The same AppleID was used for the upgrade on both computers, but we have separate logins.

    At work, we upgraded to Mavericks on two iMacs, using the same AppleID. Now, in Safari, the Favorites bar shows only my coworker's faves on both computers, and my Bookmarks are in the bookmark listing, also showing on both computers. How can we fix this, so that I only see my Favorites and Bookmarks and she only sees hers?

    I hope it's okay that I post about my progress with this!
    I restarted both computers and tested our Safari connection by deleting a couple of bookmarks on my computer. They did NOT delete from the other computer, so that problem seems to be resolved. I'm not sure what will happen if she signs back into iCloud, but we'll cross that bridge when we come to it.
    I hope this helps, if you have a similar problem.

  • TS3999 my entries typed on my iphone do not transfer to the ipad calender but works from the ipad to the iphone.  what am i doing wrong?

    help, when i create a new event on my Iphone4 calendar it does not show up on my Ipad.  It does work from the Ipad to the Iphone4.  I am  using Icloud and Icloud backup.

    Hi there LovelyLily,
    You may find the troubleshooting steps in the article below helpful.
    Resolve issues with an over-the-air iOS update
    Not enough space to update
    If your device doesn't have enough space to download and install the update, you can use iTunes to update your device. 
    -Griff W.  

  • I recently had to get my iPhone 4s replaced.  The old phone was backed up to ICloud.  I get a message when I plug this one in that it is not backed up and there isn't enough storage left to back it up. How to I remove from the other phone so I can back th

    I am trying to back up my new Iphone on to ICloud.  It shows I dont have enough storage because it still has stuff from the old IPhone.  How can I back up this phone and erase from the other.  Apple kept the other phone when they replaced it.  If I hit the delete storage for the other phone (which shows up on the Icloud Icon on this phone) will I lose everything on this phone?  That's what I want to avoid....

    If it's corrupt, generally it would be lost.
    However, there is third-party software out there that can retrieve some of the data, those of which however I could not recommend as I have never done so myself.
    Also, if the old 4S was running a more recent software version than the current 4S, that may cause the issue however usually iTunes tells you exactly that.
    Good luck in retrieving that information.

  • Lightroom 5 Graduated filter will not work from the centre out

    Hi
    I am running Lightroom 5.6 but I think this has always been the same. The Graduated filter in the Basic Development module only seems to work from the edges inward (from top/bottom or sides). I would like to create a filter across the centre (for a lake) but I can figure how to do this. I guess the only way is to use the new Radial filter is that correct (I would prefer to use the Grad filter).

    To create the equivalent of a Graduated filter with the effect starting at the center you can drag the radial filter endpoint to stretch it off-screen. Use the hand tool to push the radial filter off-screen and then drag the endpoint out further. You may need to do this a few times. You can also use two Graduated filters back to back, which gives you the ability to apply a centered Exposure correction and adjustments for Highlights and Shadows correction that are different on each side.

  • Asking the Bridge Team:  Bridge "working color space" setting when one does not have the Suite?

    Common sense tells me there is really no such thing as a
    "working color space" in Bridge, because
    Bridge is not an image editor, just a browser
    Therefore, this may turn out to be a purely academic question; but that doesn't keep my curiosity from forcing me to ask it anyway. ;)
    Is there a way to set the Bridge
    "color settings" when one does not have the suite?
    The only Adobe program I keep up to date is Photoshop, so I've never had the suite. My version of Photoshop is 11 (CS4) and I run updated
    (not upgraded) versions of Adobe Acrobat 7.x, Illustrator 10.x and InDesign 2.x. Consequently, the Synchronize color settings command is not available to me.
    It seems to me that Bridge is behaving like a proper color-managed browser (e.g. Firefox with color management enabled), in that it displays tagged image files correctly and assumes sRGB for untagged image files. This normally works fine.
    But what if I wanted Bridge to assume my
    Photoshop color working space for untagged images
    so that it behaves the same as Photoshop? I'm just curious, as I deal with a minuscule, practically negligible amount of untagged files.
    My reason for bringing it up now is that I don't recall this being explicitly mentioned in forum replies when users inquire about color settings in Bridge. A recent post regarding Version Cue in the Photoshop Macintosh forum got me thinking about this. Just wanting to make sure that I'm right in my assumption that
    there is really no such thing as a
    "working color space" in Bridge, because Bridge is not an image editor, just a browser.
    Thanks in advance.

    Hi Ramón,
    Thanks for sharing the outcome of your tests. However, I may have found a bug/exception to Bridge's colour management policy!
    It appears that CMYK EPS photoshop files are not colour managed in Adobe Bridge, even if they contain an embedded ICC profile.
    I've tried every combination in the EPS 'Save As' dialogue box, so it doesn't seem to be an issue with file encoding. Also, Bridge doesn't rely on the low-res preview that is held within the EPS itself.
    My guess is that Bridge is previewing the CMYK EPS with a Bridge-generated RGB image, but it's being displayed as monitor RGB (assigned) rather than colour managed (converted to monitor RGB). For most users the difference will be barely perceptible, but the problem became very noticeable when using Bridge to preview Newsprint CMYK images on a wide-gamut monitor (images that should have appeared muted really leapt off the screen!).
    How do I report this to the Colour Police at Adobe?!?

  • HT204053 My wife and I have an iphone each using one apple id. How do we stop items being deleted from one phone and then find it has been deleted from the other?

    My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
    Also this works when one of us downloads an app it appears on the other iphone

    You need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
    Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item.

  • Up loading album art work from the net problem

    Just recently, I keep getting " unknown error - 609 " every time I go for up loading album art work from the net. This applies to all the albums not just the really obscure ones ! and its just the art work because I can still get all the track listings.

    Actually I experienced the same thing but it's not an issue of missing artwork in the wi fi store. The reason I say this is that when initially purchased the artwork showed fine on the device.
    After syncing it also shows fine in ITunes. When checking the device again though, it seems to display random art from the library for that track. In cover flow, if not the center image, i displays what i can best describe as a color static image in the place of the album art.

  • I have different bookmarks that I want to keep on each computer, will sync delete the bookmarks on one computer and overwrite the bookmarks from the other computer in their place

    I have not used sync yet, but I have the gut feeling there is going to be a problem if I do. I have different bookmarks that I want to keep on each computer. Will sync delete the bookmarks on one computer and overwrite the bookmarks from the other computer in their place? So I'm guessing it will erase the bookmarks on the second computer that you set up to sync. Is there a way to merge the bookmarks from each computer into one bookmark library that contains all the bookmarks from both computers, so that I don't lose any bookmarks by syncing?

    Hi,
    Firefox Sync works by merging all the info in all your computers. It doesn't replace anything. So if you have information A in one device and information B in other device, after setting up Sync you will have information A+B in both devices.
    I hope this clarifies the situation.

  • HT5887 I am not able to transfer files on airdrop from phone to another. Whereas I can receive files from the other phone. Both devices are iPhone 5.

    I am not able to transfer files on airdrop from phone to another. Whereas I can receive files from the other phone. Both devices are iPhone 5.

    I have tried all sorts of Settings but just doesnt seem to work one way. I keep getting messages "Airdrop cancelled".

Maybe you are looking for