RADIUS Server - Extending the network

I have successfully set up RADIUS running on 10.5.5. Users are able log in and all is working well (except for Windows XP clients connecting from login, but who cares about them at the moment!)
I want to be able to extend the network. I am using Apple AirPort Extreme base stations. There is an option to extend the wireless network, but when I tick this, I lose the ability to set up with WPA Enterprise and RADIUS. If I give the networks the same SSID will this let me roam?
Any help appreciated!

Hallo
I found this to help you with Windows Xp login http://www.usr.com/support/doc-popup-template.asp?url=faqs/networking/zero-confi g-radius/zero-config-radius.htm&loc=unst
Windows XP klient på Leopard server RADIUS (AirPorts)

Similar Messages

AirPort Extreme extends my network and has worked well for three months. Now it can no longer extend the network and flashes Amber. I have restored to factory settings moved it closer to time capsule and rebooted the system without luck

i have a blinking Amber on my extreme now and it cannot extend the network. It was working fine and nothing has changed. I have restored to factory settings moved it to another room and rebooted the system without luck. Any suggestions

What OS are you running?
Please give me a screenshot of the current AE setup..
I strongly recommend if you have issues.. take control of all the variables. Apple routers have too much auto..
Here is a list that I use for setups when using Yosemite.. but it relates to any OS.
You will need to factory reset again to get going.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite or whatever you are using.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 for basestation.
Use AE24ghz and AE5ghz for wireless on each band, with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for router but if the AE is bridged you can have trouble.. Try using the static IP method or control it via the main router dhcp reservations.
4. Check your share name on the computer/s is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Set up the extend to the Express using 2.4ghz and then see how good or bad the connection is.. this is better in the old v5 utility but if you hover your mouse over where it shows connection an extra chunk of info comes up.
I have specifically used 5ghz to make the extend.. because by testing it works better.. but do not be fooled.. this good connection is poor.. the RSSI.. which is difference signal .. at -79dbm is down the bottom of the stable.. and it drops out on a daily basis.. you want to see that signal around -60dbm at min.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.

How do i use my time capsule and extend the network with airport express

I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

Use the search as this has been done to death ..
Bob Timmons is the expert on this.. look at his answers here.
https://discussions.apple.com/thread/4274187?start=0&tstart=0
https://discussions.apple.com/message/21856077#21856077
This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
Apple doco is also good to read.
http://support.apple.com/kb/HT4145
http://support.apple.com/kb/HT4259
Note.
You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
Thanks!

It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

I have an airport extreme for my main internet connection, an express to listen to music on my home theatre, another express to extend the network upstairs, and one more express for my wireless printer. whats the best way to setup the express stations?

So basically I would like to know if its best to have them setup on "join a wireless network" or "extend a wireless network"
Obviously the one I use to extend the network is setup that way, the other 2 are set on "join a network"
is this the optimal configuration? or should I have them all on "extend a wireless network" ?

There is really no "best" setting here for the AirPort Express devices. If you need more wireless coverage in the area where an Express is located, then it makes sense to configure the Express to "extend" a wireless network.
If you already have good coverage in an area where an Express is located, then the "join" configuration makes sense.
I've yet to meet the first user who felt that he/she had too much wireless signal coverage in their home, but you never know.

How do I install a new airport express and link a second airport express to extend the network of the first airport express?

I currently have a linksys wireless router attached to the Internet. I have an A1264 Airport Express connected by Ethernet to the linksys router. I have two network names, one for each wireless network.
I purchased a new A1392 Airport Express to replace the linksys router and join to the A1264 Airport Express, and I want to have one network name as a result.
How do I do this? I realize that I have to reconfigure the A1264 device so that it is an extension of the A1392 device.

You have a fairly complicated set up, so I suggest that it would make sense to tackle things in stages, testing each stage as you go, before proceding to the next stage.
Stage 1 would be setting up the A1392 first to the cable modem, and then making sure that everything is working correctly on the A1392 Express
Stage 2 would be adding the Netgear switch and testing each port with a laptop connected via Ethernet to make sure that everything is operational on the switch
Stage 3 would be connecting the A1264 Express and testing to make sure that it is extending the network correctly
Stage 4 would be adding other Ethernet devices to the Netgear switch and testing each one at a time before adding the next device. There is some question about whether an iOS device can print to an Ethernet connected printer....even if the printer is AirPrint compatible. You may need to connect the HP using wireless...not Ethernet....to gain full AirPrint functionality, or use another application that will allow printing like Printopia or Print Central using the Ethernet connection on the HP.
Stage 5 would be adding the printer to the A1264 AirPort Express.
You do not mention how the printer will connect to the A1264 Express, but I assume that it will be USB from your description. Most printers will work, but you really will not know if your printer will work until you try.
Remember that only printing will be supported at the USB port of the Express. If you have an all-in-one type device, scan, maintenance, and other advanced features will not be operational whent the device is connected to the AirPort Express.
If you want to print from an iOS device like an iPad or iPhone, plan to add additonal software like Printopia or Print Central to possibly allow this function. There are no guarantees here as far as the iOS devices.

I have a airport time capsule, an older airport extreme, and an airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I have a airport time capsule, an older airport extreme, and an older airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I am using TM Unifi with an ASUS RT-N18U Wi-Fi router. I would like to know could I use Apple AirPort Time Capsule to extend (repeater, booster) my Wi-Fi to a part of the house where the Wi-Fi signal is poor
Yes,, if you plan to connect the AirPort Time Capsule to the ASUS router using an Ethernet cable connection that will remain fixed and permanently installed at all times.
No, if you were planning to have the AirPort Time Capsule connect wirelessly and extend the Asus WiFi signal, since it would not be compatible with another manufacturer's router for that purpose.
Another way of saying the same thing here would be that if you want to extend the network wirelessly, it will take two Apple routers to do so

Extend the network for airport extreme

Problem overview. I have a timeWarner cable modem that has both wired and wireless output supporting four external ethernet ports. I want to extend my network (bridge) to use the extreme in another room and connect other hardware that has only ethernet capabity only. My test configuration consist of an Imac wired to TimeWarner Modem and a stand alone laptop (Macbook pro). I can connect to both the wireless and wired configuration for TIme warner with out a problem.
If I take the airport extreme, and connect teh Timewarner ethernet output to the WAN input and the laptop to the free extreme ports, then I am able to add capability where the extreme can create a new wireless network and the laptop can gain access to the internet via the new wireless an wired network fine.
This was done as an initial test to verify the extreme was working but really is not what I want. I want a bridge connection. Therefore
1) Using airport express I changed the wireless settings to Extend the Network.
2) Removed the WAN cable from the extreme.
3) Was able to connect to the extreme using the airport utility and show the status as an extended network.
Overview
The network shows to be the ssid of my local network (Walmart)
The IP Address is 192.168.0.6
The serial number is COPJ900JDM72
Version 7.6.1
Status: Extended Network.
Now when I hook my Macbook pro to the ethernet port into 1 of three ports on the extreme.
The ip address shows 169.254.98.37
I never acquire a valid IP address to connect to the network from the Macbook Pro.
What am I doing wrong?

Hi - if I understand correctly, you want to connect the Express wirelessly to the TWC modem/router and then connect your MBP to the ethernet port - is this true?

Extending the Network with AX

I need some help. I have 3 AX units and 1 NetGear wireless ADSL modem/router. Currenlty NG router is OK but range is poor as house is large. I wanted to use AX units to extend the network (in addition to using AirTunes) but guys at Apple Shop in London (who seemed a bit unsure) said you can only use AX units to extend the range of an Airport Extreme Basestation and not a NetGear network. Is this correct??
If its true, can I disable the wireless broadcast of the Netgear unit (thus using it only as the DSL modem) and harwire the first AX unit to the Netgear modem (via Ethernet) and then use the other AX units to boost the signal around the house?
I did end up buying the Airport Extreme Basestation on Apple Shop's advise, but if I don't really need it, then I'd rather take it back for a refund. Does having the Extreme Basestation give me some other benefits I don't understand?
iMac G5 Mac OS X (10.3.7)

you can only use AX units
to extend the range of an Airport Extreme Basestation
and not a NetGear network. Is this correct??
That is correct according to Apple. I have heard of it being done with a Linksys WRT54G and a few others but not Netgear (yet).
If its true, can I disable the wireless broadcast of
the Netgear unit (thus using it only as the DSL
modem) and harwire the first AX unit to the Netgear
modem (via Ethernet) and then use the other AX units
to boost the signal around the house?
Yes. These instructions can use either an Airport Extreme Base Station (AEBS) or Airport Express (AX) as a WDS Main Station:
http://docs.info.apple.com/article.html?artnum=107454
Does having the Extreme Basestation give me some other
benefits I don't understand?
Yes, A phone modem you don't need, an external antenna jack that I have not been impressed with, and the one thing that might be useful someday for you - another ethernet port to plug in hard wired devices near the base station in addition to the broadband modem.

Airport express just stopped extending the network

I have an airport express that I have been using for 3 years to extend the network in my house.
All of a sudden it started flashing amber. I've tried soft resets, hard resets, factory resets, and I can't get it to extend the network anymore.
I have 3 other expresses in the house that still extend the network, but this one won't.
Everytime I go run airport utility, it sees the express, and will actually allow me to JOIN the network (I get a solid green light, everything is good) but everytime I ask it to EXTEND the network, it gives me an error message and says it can't do it.
It's an old extreme, that I bought refurbished, so I might be able to accept it's old and needs to be replaced, but then why can I join the network, but not EXTEND the network?
Any thoughts would be appreciated.

Apple's instructions to "extend a wireless network" are on the main forum page and also here:
http://support.apple.com/kb/HT4259
Although the example pictures an AirPort Extreme as the "extending" device, the setup for an AirPort Express would be exactly the same.

Airport Extreme not showing up after switching to extend the network

I have an older Airport Extreme that I am trying to setup to extend the network from my uverse gateway. When I restore the AE to factory settings and set it up to extend the network, it goes through the process and then flashes amber. Also, it takes several tries for the AE to even show up at all in Airport Utility. The AE is version 7.6.4. I am running on Mac with 10.10.1
Thanks

When two wireless routers.....the Uverse in your example, and an AirPort Extreme......are located a few rooms apart with both configured to create a wireless network using the same wireless network name and password, then things will behave as if you have one "big" network.
Although the AirPort Express is technically creating a separate network, the fact that it is using the same wireless network name and password will make it behave as if it were extending the network to provide more range. This is technically known as a "Roaming Network".
Also are you suggesting to not use the uverse gateway as a wireless router but to use the AE as such?
No, since you indicated in your first sentence that you wanted to use the older AirPort to extend the network. It could not "extend" the network if the Uverse gateway was not already producing a wireless network signal, since there would be nothing to extend.
Now, if you do want to turn off the wireless function on the Uverse and only use the AirPort Extreme, that is an option, but you will have a much "smaller" network range wise, since you will only have a good wireless signal when you are in range of the AirPort Extreme.

Airport express stopped extending the network

Hi all,
I have had working an Airport Extreme acting as a wifi base plus an Airport Express to extend the network for more than one year and could receive an excellent wifi coverage all over the appartment.
Recently, I decided to update my laptop OS version (an old Leopard) first to Snow Leopard and immediately after to Lion. After lots of software updates, at some point I begun receiving warnings to update the Extreme firmware. I did so and that same day I realized that the Express was not working as network extender any more. I further got frustrated to see that the latest Airport Utility didn't even "like" my Express and I had to downgrade to Airport Utility 5.6 in order to be able to configure the Express.
This was almost one month ago and I have spent many hours and tried all kind of combinations since then. For instance, I checked that the express was ok by creating with it a new network. This worked perfectly. I also reseted the Express to manufaturing defaults several times. I have even created a full new network from the beginning. Nothing works.
Both devices show green lights, but when I'm close to the Express, the BSSID I get is that of the Extreme, not the Express BSSID. I can see the Express in Airport Utility 6 but it is shown as connected to the Extreme with a dashed line.
I don't know what else to try. The worse thing is that even by buying a new Express I don't get any guarantee that the problem won't persist, since the network extension has worked perfectly in the past and doesn't work any more.
Any ideas are welcome.
Best,
Pedro.

I am starting to think that I have a non-functional device.
That is looking like a possibility.
Try a Factory Default Reset if you have not done so already.
Leave the Express powered off for 15-20 minutes
Hold in the reset button first, and keep holding it for an additional 9-10 seconds while you simultaneously plug the power back into the Express
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light
Try to configure the Express in the same room as the main router. Restart the main router before you try to configure the Express. If it works, then move it further away....but do not reset it....to see if it will connect and behave.
If you still cannot configure the Express after the Factory Default Reset, I think you have a defective Express.

Extending the Network kills speed performance, would bridging do the same?

I have a Time Capsule in my basement and upstairs I have a very hard time getting a good wireless signal.
I decided to buy an Airport Express to try and solve the problem. I tried to extend the network with the AX and now my computer upstairs can get a good wireless signal, however the performance has dropped significantly. When I run a speed test on both my upstairs computer and my laptop downstairs I now get about 1.5 Mbit down/1 MBit up which is much worse than what i used to get (10-14 MBit down/2 MBit up).
If I were to hook the AX up to an ethernet port in my house (should be activated in the next few days which is why I can't try it now) and have the AX set up to work in bridge mode, would this improve the performance? I thought I read somewhere that extending the network could hurt performance (which I'm certainly seeing), but I don't know if that would apply to bridge mode.
Thanks for the help.

The way I understand it -
You're effectively doubling the network traffic - everything has to make 2 hops. The "extension" receives the data and has to re-transmit it to the main base station. Receiving, processing and re-transmitting takes time.
In reality, traffic can be much more than doubled. If the message from the computer is received by both the extension and the base station, and then again by the base station when the extension re-transmits it, the base station has to work out that it has received the data twice. This extra processing (ignoring duplicates) takes time.
With more data on the network, there's more chance of "collisions", so more re-transmits.
I think it's pretty amazing that it works at all!

Command to check active radius server in the pool

Hi,
Is there a command on WLC to check the current active radius server in the list?
I have configured multiple radius servers and noticed in the logs the radius servers were often deactived and activated. I would like to see which is the current active radius server for a WLAN.
Thanks

There isn't a command to check. You could enable fallback or just see the log on which server was the last one to be deactivated.
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008098987e.shtml
Sent from Cisco Technical Support iPhone App

I used Airport Base station and I was able to extend my network using airport express and connect my printers. Now I am using Extreme and I can't extend the network (Express) or the printers nothing shows up. I am using utility 6.3 and Mt Lion What is

I had an Aiport Base Station and extended using Airport Express, where I also connected my printers (network). Now using Airport Extreme off Mt Lion 10.8.4 and Utility 6.3.
I can't extend the network (express) or connect my printers (USB) nor will it find my one wifi printer.
What's up?

For now, leave the AirPort Express powered off.
Power off the entire network....all devices.....in any order that you want
Wait a few minutes
Power up the modem first, and let it run 2-3 minutes by itself
Power up the AirPort Extreme next, and let it run a full minute
Keep powering up devices one at a time about a minute apart until everything is powered up (leave the Express off for now)
Open AirPort Utility and check to see if the AirPort Extreme is visible.
If it's not, click the AirPort Utility menu at the upper left of the screen, then click About AirPort Utility. Post back with the version number of AirPort Utility that you see there....which should be AirPort Utility 5.6.1.
Post back on your progress.

RADIUS Server - Extending the network

Similar Messages

Maybe you are looking for