Rafraîchir indicateur chaine

Bonjour,
Mon problème ne doit pas être bien méchant. Je récupère un texte dans un fichier que je veux afficher sur la face avant. je dois le rafraichir à chaque tour de la boucle While. Le problème est que je me retrouve avec mon texte 100 fois dans mon indicateur. Je voudrais écraser mon texte à chaque tour de la boucle.
Quelqu'un a t-il une astuce ?
Merci,

Salut Sergreyn,
Le problème est simple : tu concatènes les datas de ta chaîne grâce à un registre à décalage, c'est logique qu'il te mette 100 fois la donnée... Si tu souhaites uniquement afficher la dernière valeur, il s'agit juste de ne pas concaténer ce que tu souhaites récupérer avec le registre à décalage.
J'espère avoir répondu à ta question.
Bilsix.

Similar Messages

Web printing dont like german Umlaute

I use the german version of web printing.
If I print a web site with german umlaute ( ä,ö,ü ) the printer will not print these signs.
What flags have to be set to get the right printout.

I just tested, and it prints out OK with umlaut, and also show correctly in the PDF, so there must be something else wrong in your setup.
What about other accents?
Try to copy this into Web printing:
L'été a été très chaud et il était possible de se rafraîchir à la mer.
And some Danish wovels : æ ø å

Divers bugs et changements - Maj Dreamweaver CC

Hello,
je viens pour faire part de mes déboires depuis la dernières mise à jour de Dreamweaver CC.
Je suis sur PC / Win 7 SP1 / Dreamweaver 13.1 Build 6443.
J'ai de nombreux bugs d'affichage (je ne suis pas le seul) comme le pointeur texte qui disparait quand on navigue au clavier ou quand on écrit, les menus qui mettent plus longtemps à s'afficher/rafraichir, etc.
Le truc qui me rend fou : le raccourci natif ctrl+fleches (pour naviguer entre les mots) a été carrément bloqué et maintenant remplacé par alt+fleches. C'est juste une abération de bypasser des raccourcis natifs du systeme.
Si ce changement a été voulu par l'équipe de dév .... mais que leur est il donc passé par la tête ? peut-être une private-joke qui s'est retrouvé dans la release finale ?
Bon je passe sur la couleur des icones de dossier (toutes identiques) ... chiant car on ne distingue plus du coin de l'oeil si on est en local ou online, mais c'est encore supportable.
Ah .... et ce magnifique sélecteur de couleur dans lequel on ne peut plus naviguer au clavier, magique !
En terme de pure « productivité », cette version est un non sens car elle force à plus utiliser la souris (génial pour un dev).
Donc .... merci Adobe !!!! jamais une mise à jour ne m'a autant donné envie de retourner sur ma MX 2004.

Bonjour mainserv@work,
Quelques nouvelles à partager à propos des problèmes mentionés dans ce fil de discussion.
L'équipe Dreamweaver a pu reproduire certains des problèmes mentionés ci-dessus et y remédie pour la version à venir (13.2). Ces problèmes sont les suivants:
le pointeur de texte,
le racourci clavier (ctrl + flêches)
la couleur de icônes
L'équipe Dreamweaver a besoin de plus amples informations pour pouvoir reproduire le problème de lenteur pour rafraîchir l'écran et les menus. Nous n'arrivons pas à reproduire ce problème:
Est-ce que ce problème existait déjà dans la version précédente de Dreamweaver (13.0 or 12.0)?
Est-ce que ce problème se déroule dans toutes les situations ou seulement dans certains flux de travail?
Pour le selecteur de couleurs, est-ce que j'ai bien compris que vous voudriez pouvoir vous déplacer à l'aide des flêches? Est-ce qu'une autre application d'Adobe offre un sélecteur de couleurs répondant à vos attentes?
Aussi, parlez-vous aussi l'anglais? Je peux vous mettre en direct contact avec notre Lead Quality Engineer pour adresser le problème de rafraîchissement.
Cordialement,
--Jean-François.

Mysql dll

Bonjour,
j'ai un souvis avec l'affichage de ma base de données sur Labview.
Voilà, dans mon projet on me demande de faire communiquer ma database Mysql avec Labview via C#. J'ai d'abord tout fait dur C# avec une windowsForm (Form1 par exemple) et ensuite, j'ai convertit mon windowform pen bibliothèque de classes pour générer un fichier dll. Maintenant quand j'appelle ma classe Initialise par exemple (qui me permet de me connecter à ma base et d'afficher ses tables) , je dois aussi appeler Form1 pour voir ma fenetre. seulement en le faisant, j'affiche la Form1 de C# et same dérande, car moi je voudrais que cette Form1 soit afficher sur Labview. Et donc j'aimerais que l'on m'explique ce que je dois faire pour pouoir afficher mes tables et les modifier sur Labview mais en passant par C#, si c'est possible. Merci d'avance

Bonjour Lou,
Pour être honnête avec toi, je ne comprends pas tout à ta situation...
Si je comprends bien, la communication en question est MySQL <==> LabVIEW <==> C# et tu as déja réalisé une Windows Form, exact ?
Ensuite, tu dis vouloir appeler ta classe "Initialise" et appeler la "Form1", peux-tu nous dire depuis quel environnement ? (LabVIEW, Visual, etc. )
Enfin, peux-tu me confirmer que ce dont tu as besoin c'est d'afficher sous LabVIEW la Form1 et rafraîchir celle-ci depuis un code C# ?
Si oui, peux-tu nous dire pourquoi ?
Merci de ces précisions !
Mathieu_T
Certified LabVIEW Developer
Certified TestStand Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
LabVIEW Tour
Journées Techniques dans 10 villes en France, du 4 au 20 novembre 2014

Labview- adapter la hauteur et la largeur d'un indicateur de type chaine bonjour,

bonjour,
Je cherche un moyen d'adapter la hauteur et la largeur d'un indicateur de type chaine en fonctionde ce qu'il recoit...
Je souhaiterai aussi que la face avant s'adapte à cet indicateur
Merci d'avance...
Iiobulli

Bonjour,
Je ne sais pas ce que c'est, un indicateur de type de chaine. Mais peut-être, mon exemple aide même si (image de sous). J'ai pris un indicateur "string". Le "sub VI" de NI calcule la place que le texte a besoin.
La grandeur du surface du "VI" est changeable, aussi les position des control. Ou qu'est que ça veut dire, la face? La face de quoi?
Meilleures salutations,
shb
Message Edited by shb on 01-23-2008 11:46 AM
Attachments:
resize control.png ‏10 KB

Adapter la hauteur et la largeur d'un indicateur de type chaine

bonjour,
Je cherche une méthode pour adapater la dimension que ce soit en hauteur ou en largeur au contenu de type chaine qui lui est envoyé....
Je souhaiterai aussi que la hauteur de m aface vant varie avec la hauteur de mon indicateur de chaine ...
Merci d'avance

Double post.
Follow this link.
http://forums.ni.com/ni/board/message?board.id=170&thread.id=296875
Romain D.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
NIDays 2010 : Conférence mondiale de l'instrumentation virtuelle
>>Détails et Inscription<<

Photoshop Elements Organizer 11 crashes due to deadlock in the thread wait chain when creating thumbnails for *.mts (AVCHD) files

Hi,
the Elements Organizer 11 creates a deadlock in the wait chain when generating thumbnails for more than a handful of MTS (AVCHD) files.
After importing AVCHD files from my Canon video camera, the organizer using default settings always crashes. I was able to narrow down the problem to be caused by thumbnail generating.
After deactivating the automatic generation of thumbnails, the organizer does not crash any more upon launching .
Of course, working without thumbnails is not very practical. The next resort is manual trigger of thumbnail generation by selecting "update thumbnail".
If I manually trigger updating of thumbnails for files one by one, then it works for quite many files before crashing again.
Selecting thumbnail update for multiple files at once has a much higher likelihood to crash.
This does not seem to be related to particular file contents: a file that leads to crashing once may be flawlessly get a thumbnail created at the next attempt.
The Windows event report looks as follows (German language Windows):
Name der fehlerhaften Anwendung: PhotoshopElementsOrganizer.exe, Version: 11.0.0.0, Zeitstempel: 0x505e9f67
Name des fehlerhaften Moduls: msvcrt.dll, Version: 7.0.9600.16384, Zeitstempel: 0x52158ff5
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00009919
ID des fehlerhaften Prozesses: 0x13c8
Startzeit der fehlerhaften Anwendung: 0x01cfb676145d0c54
Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\msvcrt.dll
Berichtskennung: b8817e29-2269-11e4-bf2d-10bf487f7b28
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Occasionally, a different module is listed as erroneous instead of msvcrt.dll.
My questions:
- has anyone experienced the same problem?
- is this a known issue with Organizer 11?
- is the issue solved with Organizer 12?
I have Premiere Elements 11, Photoshop Elements 11 installed and not experienced any other issues with these applications.
Playback of said AVCHD (*.mts) files works flawlessly, i.e. I do not have any codec or performance issue on my PC.
Deactivation of anti-virus software has no significant effect. I have excluded video directories from scanning anyways.
Have deactivated face recognition, visual search and smart tagging in the organizer.
Have also disabled hyperthreading in the BIOS.
Using Windows XP compatibility settings for PSE somewhat improved the stability, but did not completely eliminate crashes.
Additionally, it signnificantly slows down thumbnail generation and a progress indication window becomes visible during thumbnail generation, which is barely noticable in native Win 8.1 mode.
Officially, Elements 11 is compatible with Windows 8.1.
There is a knowledgebase article related to Elements 6, which recommends to disable multi-threading and to enforce execution of Organizer on more than one core.
This reduces the problem a little bit, but thumbnailing more than a handful of files still leads to crashing.
By means of the task manager, I analyzed the wait chain of the process PhotoshopElementsOrganizer.exe:
Every time the fault occurs, it is caused by a deadlock in the wait chain.
For example:
PhotoshopElementsOrganizer.exe (PID:6440) Thread: 6540
-- PhotoshopElementsOrganizer.exe (PID:6440) Thread: 5932
---- PhotoshopElementsOrganizer.exe (PID:6440) Thread: 6540
PhotoshopElementsOrganizer.exe (PID:6440) Thread: 5932
-- PhotoshopElementsOrganizer.exe (PID:6440) Thread: 6540
---- PhotoshopElementsOrganizer.exe (PID:6440) Thread: 5932
Regards
Oliver
Microsoft Windows 8.1 Pro, 64bit, 6.3.9600 Build 9600
Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz,
16 GB RAM
AMD Radeon HD5450, 1GB
256 GB SSD, Crucial M4-CT256 (Windows, Application, Swap and Temp files), NTFS
1.8 TB HDD, WesternDigital, WD2002FAEX-007BA0, NTFS (media store)

Hi,
I'm experiencing the same problem after importing MTS files.
When you said that you unisntall all other codec, what do you mean?
Codec Inside element software?
I have desable the automatic thumbnail and it still crash.
I'M running the software and trying to import more video files and the program keep crashing during the process of selecting the files in the directory to be imported.
i went in my windows 7 journal and here is the error.
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-08-31T19:36:04.000000000Z
EventRecordID
244366
Channel
Application
Computer
Ordi-Denis
Security
EventData
PhotoshopElementsOrganizer.exe
11.0.0.0
503fdd1d
MSACM32.dll
6.1.7600.16385
4a5bda4e
c0000005
00004d91
1634
01cfc552c927dce5
C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe
C:\Windows\system32\MSACM32.dll
0b097e53-3146-11e4-a14e-bcaec51a14f7
Please i need help since Adobe is not helping us.

How to get newly added recipient on a reply email vs the old recipients already on the chain

Hi,
Really need some help as hitting a dead end, hopefully someone here can help as always :-)
I'm trying to differentiate between old and new recipients on an email chain when a user replies / forwards an email. e.g. if a user receives an email with a few other people cc'd, selects reply all and then adds another new recipient before sending,
I want to be able to be able to get the email address of just the new recipient added.
One way I thought of was to look at the email body and see if the email / display name appears in the From: CC: headers that appear at the top of the previous message, however the user might have deleted these and also the new recipient may have the same
display name as an existing one, so this won't work.
Maybe there is a way to use the headers of the composed email before sending and compare to on the send event? Do the headers on send give any indication as to previous recipients vs new ones?
Thanks a lot in advance!
Tom

Hello Tom,
> Maybe there is a way to use the headers of the composed email before sending and compare to on the send event?
New items don't have the PR_TRANSPORT_MESSAGE_HEADERS set.
> Do the headers on send give any indication as to previous recipients vs new ones?
Nope. You need to check out the source message. The
ReplyRecipients property of the MailItem class returns a Recipients collection
that represents all the reply recipient objects for the Outlook item.
Or you may handle the Reply actions in the code. For example, you may consider repurposing the Reply buttons on the UI. See
Temporarily Repurpose Commands on the Office Fluent Ribbon for more information.

Sales Order Stock Configuration across the Supply Chain

Dear Colleagues,
here's my query. This is more related to configuring Make To Order on R/3 Side.
As a Requirement, my client would want that across the supply chain, to trace the stocks relevant for a particular Sales Order. One way I came across was using Sales Order Stock.
The Product Flow Network is like :
Plant > BSR > WH1 > WH2 > Invoicing Point.
(- No Planned Movement Doc in Plant-BSR) > STO(B-W) > InterCo PO(W1-W2) > STO(W2-Inv. Point)
What I would like to know is that using MTO strategy and Sales Order Stock, how can we configure the following scenario?
1. Sales Order is Created with Account Assignment
2. InterCompany STO and InterPlant STO can be created with Account Assignment Category Type 'E' and reference to the Sales Order-Item No.
3. Using STOs at BSR, Propogate the Demand to Plant, create a Planned Order with Account Assignment and Sales Order Reference.
4. Production and subsequent GR to Sales Order Stock at BSR
5. Subsqeuent Deliveries only against the Relevant STOs and GR to Sales Order Stock at all locations in the network.
I would like to highlight that the need for identification of linking SO to Production Order is only from the stage of SKU-production order at the plant to utpo final delivery from the Invoicing plant.
regards,
Sudhir
Edited by: Sudhir Gulati on Jul 23, 2008 12:05 PM

Typically MTO situation is better modeled in PPDS since it does pegging through the network. In SNP we typically do dynamic pegging and hence it will be difficult to link the sales order all the way to production order. Having said that SNP does take into account available resource for planning some of which could have been consumed by MTO orders. This perhaps may not be helpful to your scenario.
As I said dynamic pegging is done with SNP. So when you use SNP in the network, you can basically check the product view to see the supply-demand links. (/sapapo/rrp3) These links are indicative and you should be able to use them for tracing purposes.

Big email messages sent by BW Process Chains

Dear Experts,
We have a process chain in our system that set to send us email message if it ended with errors.
The problem is that these email messages includes a system log and each message is bigger then 5 mb.
Is there any way to control the size or the content of these email messages?
We don't need the long log text, only a one word indication that something went wrong.
Thanks,
Ron.

Hi!
Our basis had been annoying us with this problem for a long time. Then we produced a very u201Cintelligentu201D decision
You can remove message from this (analyzable) chain link and add another one with type u201CANDu201D. Then connect them with green. After that, create message for this u201CANDu201D- chain link, e-mail will be very small. The existence of this e-mail will indicate about successful chain run.

Latch: cache buffers chains

Hi,
I am facing the following in my DB.Oracle version is 11.1.0.7.0
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
latch: cache buffers chains 37,910,465 17,344 0 42.64 Concurrency
I checked the SQL causing the wait using following query.
select count(*), SQL_ID from gv$active_session_history where event like '%cache buffers%' group by SQL_ID;
COUNT(*) SQL_ID
1
3 3wunvbmu64d8j
2 9q2ux8f92za7m
36000 47g8dw48ghk5s
2 5arqxftxr7tjr
Also i tried the following.
select count(*) child_count, sum(gets) sum_gets, sum(misses) sum_misses, sum(sleeps) sum_sleeps from v$latch_children where name = 'cache buffers chains';
CHILD_COUNT SUM_GETS SUM_MISSES SUM_SLEEPS
65536 1.5723E+10 3163139088 56744600
SQL> select P1 from v$session_wait where event = 'cache buffer chains';
no rows selected
How do i proceed with this?
SQL ID - 47g8dw48ghk5s is an update query.Can increasing freelists of this table help ??Kindly assist me.
Thanks.

user10698496 wrote:
Elapsed Time (s) CPU Time (s) Executions Elap per Exec (s) % Total DB Time SQL Id        SQL               Module SQL Text
29,725        6,747     82,289               0.36            73.08 47g8dw48ghk5s app2 (TNS V1-V3) UPDATE ZH_TBL SE
CPU Time (s) Elapsed Time (s) Executions CPU per Exec (s) % Total % Total DB Time SQL Id        SQL               Module SQL Text
6,747           29,725     82,289              0.08   62.52           73.08 47g8dw48ghk5s app2 (TNS V1-V3) UPDATE ZH_TBL SE...
Assuming that this is the standard one-hour snapshot that seems to be a rather small number of executions to waste so much latch time.
Moreover, since it's an update by rowid it's surprising that it should take so much CPU per executions unless you have a very large number of indexes on the table which have to be maintained.
Can you show us the "Load profile" and "Top 5 timed events" from the same period, plus the system summary bit (memory, cache size, CPU count) that's near the top of the report.
In your position I'd run up a little query to look at the stats in v$sql for that sql_id, and watch the executions, buffer_gets, cpu_time etc. changing over a few minutes in case there's something funny with the snapshot and youre losing large numbers in the execution counts. (I'd be particularly interested in the number of CPUs you have, and the CPU load on the system - sometimes you can get really wierd latching issue which are basically caused by CPU loading, especially on NUMA systems).
Since you've got the ASH data, there's also more information you can get from there - is it
a) the same latch all the time
b) a small number of different latches
c) a small number of different latches, but the same latch for any specific sid/serial
d) does the latch seem to change over time
If it's a small number of fixed latches you may be able to query the buffer cache with the latch address to see if there are any "obvious" blocks with a high touch count covered by those latches - they may be things like the root blocks of indexes used for referential integrity.
If the latch seems to keep moving it could be an indication that the update is slowly travelling along a table and every block is subject to competition from a number of concurrent processes.
Kyle Hailey has some sample queries against ASH that may point you in the right direction: http://sites.google.com/site/embtdbo/wait-event-documentation/oracle-latch-cache-buffers-chains
If you can spot a session hitting the problem you could also start tracing it to see if that level of detail gives you more clues, and I'd also start thinking about read up Tanel's notes.
Regards
Jonathan Lewis
To post code, statspack/AWR report, execution plans or trace files, START and END the text with the tag {noformat}{noformat} (the word "code" in lowercase, curly brackets, no spaces) so that the text appears in fixed format.
There is a +"Preview"+ tab at the top of the text entry panel. Use this to check what your message will look like before you post the message. If it looks a complete mess you're unlikely to get a response. (Click on the +"Plain text"+ tab if you want to edit the text to tidy it up.)

Installing new HD. Are these console messages indicative of problems?

I am installing a new 1TB drive in my early 2011 17" Macbook Pro. Ever since installing Mavericks last year, I have had trouble with slowness, keychain, mail, slow populating, etc., but now it is working more normally. I have turned off keychain to save passwords because it created lots of problems at the beginning.
My mail seems to be slow in starting (I have a lot of saved mail and the Mail folder is 32GB).
I have lots of the following console message, 60 at a time, a couple of pages, and at times less.
5/30/14 10:18:34.075 AM secd[222]: s3dl_query_row decode genp,rowid=15 failed (-26275): The operation couldn’t be completed. (OSStatus error -26275 - ks_crypt: e00002bc failed to unwrap item (class 6, bag: -3) Item can't be decrypted on this device, ever, so drop the item.)
Sometimes I get a lot of windowserver messages:
5/29/14 11:35:31.810 PM talagent[175]: CGSBindSurface: Invalid window 0x35
5/29/14 11:35:31.810 PM WindowServer[90]: _CGXWindowRightsRelinquish: Invalid window 0x35
5/29/14 11:35:31.811 PM talagent[175]: CGSConnectionRelinquishWindowRights(cid, result, reservedRights): CGError 1001 on line 875
5/29/14 11:35:31.812 PM WindowServer[90]: CGXReleaseWindowList: Invalid window 46 (index 0/11)
5/29/14 11:35:31.812 PM WindowServer[90]: CGXReleaseWindowList: Invalid window 49 (index 1/11)
I opened Contacts and the console had the following messages:
5/31/14 12:02:04.509 AM com.apple.SecurityServer[14]: Session 100031 created
5/31/14 12:02:04.512 AM com.apple.security.XPCKeychainSandboxCheck[1039]: Can't get dir or base (likely out of memory) for
5/31/14 12:02:04.513 AM com.apple.security.XPCKeychainSandboxCheck[1039]: Can't get sandbox fs extension for , status=-1 errno=No such file or directory ext=(null)
5/31/14 12:02:04.728 AM secd[222]: s3dl_query_row decode genp,rowid=15 failed (-26275): The operation couldn’t be completed. (OSStatus error -26275 - ks_crypt: e00002bc failed to unwrap item (class 6, bag: -3) Item can't be decrypted on this device, ever, so drop the item.)
Are these messages indicative of a problem? I do not want to migrate my existing data to my new hard drive if I do not have to. If these are normal messages, I will not try to re- install all programs. The secd[222] messages started with my key chain problems. Do I need to remedy some issues before I transfer my data to my new hard drive?
Thanks

I had unchecked iCloud keychain weeks ago because it seemed to generate all kinds of error messages. I checked it again and approved with my iPhone. This unleashed a slew of console messages that I had eliminated by keeping the iCloud Keychain unchecked. I have listed a sampling below:
5/31/14 11:04:41.361 PM icbaccountsd[331]: -[ICBLocalDictionary discoverLocalIAAccounts]: Unknown high level account: com.apple.account.mail - c8064566-cc20-4f82-845f-5c698af76bbf
5/31/14 11:04:41.361 PM icbaccountsd[331]: -[ICBLocalDictionary discoverLocalIAAccounts]: Unknown high level account: com.apple.account.mail - 6BE21DF0-EFED-4D9A-8C0D-7902BA8A30E9
5/31/14 11:04:41.435 PM icbaccountsd[331]: +[ICBUtilities writePrimaryChildren:]: Saving changes for local primary children...
5/31/14 11:04:41.437 PM icbaccountsd[331]: -[ICBLocalDictionary discoverLocalIAAccounts]: Unknown high level account: com.apple.account.mail - FF415C81-7881-4AD4-A046-0B7CB9676390
5/31/14 11:04:41.437 PM icbaccountsd[331]: -[ICBLocalDictionary discoverLocalIAAccounts]: Unknown high level account: com.apple.account.mail - 902744F1-C4C7-47F1-88AE-776731AF420B
5/31/14 11:04:41.458 PM icbaccountsd[331]: -[ICBSyncOperation mergeLocalChanges:]: Got the following deleted accounts: {
5/31/14 11:04:41.458 PM icbaccountsd[331]: -[ICBSyncOperation mergeLocalChanges:]: Looking for UUID: (null) from remote key: d8f3b18ef8fce1b8cb8bd4f39360eb88eb33c
5/31/14 11:04:41.459 PM icbaccountsd[331]: -[ICBSyncOperation mergeLocalChanges:]: Account not found during local discovery, however was not found in list of deleted accounts, will not delete: d8f3b18ef8fce1b8cb8bd4f39360eb88eb33c
5/31/14 11:06:19.439 PM com.apple.preferences.internetaccounts.remoteservice[323]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
5/31/14 11:06:19.439 PM com.apple.preferences.internetaccounts.remoteservice[323]: INFO: FMM: can enable: YES
5/31/14 11:06:28.144 PM WindowServer[88]: _CGXGetWindowOrderingGroup: Operation on a window 0x7b requiring rights 0x5 by caller System Preferences
5/31/14 11:06:37.906 PM WindowServer[88]: CGXSetWindowTransform: Operation on a window 0x88 requiring rights kCGSWindowRightPresenter by caller com.apple.preferences.interneta
5/31/14 11:06:37.906 PM com.apple.preferences.internetaccounts.remoteservice[323]: CGSSetWindowTransformAtPlacement: Failed
5/31/14 11:06:37.907 PM com.apple.preferences.internetaccounts.remoteservice[323]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
5/31/14 11:06:37.907 PM WindowServer[88]: CGXSetWindowListAlpha: Operation on a window 0x88 requiring rights kCGSWindowRightPresenter by caller com.apple.preferences.interneta
5/31/14 11:06:37.923 PM WindowServer[88]: CGXSetWindowTransform: Operation on a window 0x88 requiring rights kCGSWindowRightPresenter by caller com.apple.preferences.interneta
5/31/14 11:07:29.767 PM com.apple.preferences.internetaccounts.remoteservice[323]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
5/31/14 11:07:33.356 PM System Preferences[300]: *** Assertion failure in -[NSRemoteView updateWindowEdgeResizingRegion], /SourceCache/ViewBridge/ViewBridge-46.2/NSRemoteView.m:879
5/31/14 11:07:33.358 PM System Preferences[300]: postExceptionEvent caught non-fatal NSInternalInconsistencyException '<NSRemoteView: 0x7f9d01649cc0> is invalid' with backtrace (
          0   CoreFoundation                      0x00007fff92a0325c __exceptionPreprocess + 172
          1   libobjc.A.dylib                     0x00007fff8ebc7e75 objc_exception_throw + 43
          2   CoreFoundation                      0x00007fff92a03038 +[NSException raise:format:arguments:] + 104
          3   Foundation                          0x00007fff859edd41 -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 189
          4   ViewBridge                          0x00007fff8c804aec -[NSRemoteView updateWindowEdgeResizingRegion] + 151
          5   ViewBridge                          0x00007fff8c8135b5 -[NSRemoteView adjustToServiceWindowStyleMask] + 263
          6   ViewBridge                          0x00007fff8c81b512 __deferBlockOntoMainThread_block_invoke_3 + 441
          7   CoreFoundation                      0x00007fff9293453c __CFRUNLOOP_IS_CALLING_OUT_TO_A_BLOCK__ + 12
          8   CoreFoundation                      0x00007fff92925b95 __CFRunLoopDoBlocks + 341
          9   CoreFoundation                      0x00007fff9292548e __CFRunLoopRun + 814
          10 CoreFoundation                      0x00007fff92924f25 CFRunLoopRunSpecific + 309
          11 ViewBridge                          0x00007fff8c81aafb __invokeRunLoopInModeUntil_block_invoke + 20
          12 ViewBridge                          0x00007fff8c81aa67 invokeUntil + 199
          13 ViewBridge                          0x00007fff8c81aae0 invokeRunLoopInModeUntil + 87
          14 ViewBridge                          0x00007fff8c801586 -[NSCFRunLoopSemaphore wait] + 379
          15 ViewBridge                          0x00007fff8c80b1ae -[NSRemoteView orderOutChildrenOfServiceWindow] + 425
          16 ViewBridge                          0x00007fff8c80b4f2 -[NSRemoteView disassociateWindows:] + 535
          17 ViewBridge                          0x00007fff8c80c3f7 -[NSRemoteView maintainWindowRelationships:forceDisassociate:] + 628
          18 ViewBridge                          0x00007fff8c803d30 -[NSRemoteView invalidate2:] + 101
          19 ViewBridge                          0x00007fff8c803ee5 -[NSRemoteView invalidate:] + 215
          20 ViewBridge                          0x00007fff8c814b18 -[NSRemoteView endModalSession:] + 1105
          21 ViewBridge                          0x00007fff8c81b512 __deferBlockOntoMainThread_block_invoke_3 + 441
          22 CoreFoundation                      0x00007fff9293453c __CFRUNLOOP_IS_CALLING_OUT_TO_A_BLOCK__ + 12
          23 CoreFoundation                      0x00007fff92925b95 __CFRunLoopDoBlocks + 341
          24 CoreFoundation                      0x00007fff9292591e __CFRunLoopRun + 1982
          25 CoreFoundation                      0x00007fff92924f25 CFRunLoopRunSpecific + 309
          26 HIToolbox                           0x00007fff8784ba0d RunCurrentEventLoopInMode + 226
          27 HIToolbox                           0x00007fff8784b7b7 ReceiveNextEventCommon + 479
          28 HIToolbox                           0x00007fff8784b5bc _BlockUntilNextEventMatchingListInModeWithFilter + 65
          29 AppKit                              0x00007fff883a826e _DPSNextEvent + 1434
          30 AppKit                              0x00007fff883a78bb -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
          31 AppKit                              0x00007fff8839b9bc -[NSApplication run] + 553
          32 AppKit                              0x00007fff883867a3 NSApplicationMain + 940
          33 libdyld.dylib                       0x00007fff8b37b5fd start + 1
timestamp: 23:07:33.358 Saturday 31 May 2014
process/thread/queue: System Preferences (300) / 0x7fff76d4b310 / com.apple.main-thread
code: line 607 of /SourceCache/ViewBridge/ViewBridge-46.2/ViewBridgeUtilities.m in logCaughtException
domain: exceptions
5/31/14 11:07:33.361 PM System Preferences[300]: view service marshal for <NSRemoteView: 0x7f9d01649cc0> failed to forget accessibility connection due to Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated from this process.) UserInfo=0x608000472bc0 {NSDebugDescription=The connection was invalidated from this process.}
timestamp: 23:07:33.360 Saturday 31 May 2014
process/thread/queue: System Preferences (300) / 0x100a42000 / com.apple.NSXPCConnection.user.endpoint
code: line 2972 of /SourceCache/ViewBridge/ViewBridge-46.2/NSRemoteView.m in __57-[NSRemoteView viewServiceMarshalProxy:withErrorHandler:]_block_invoke
domain: communications-failure
5/31/14 11:07:41.496 PM WindowServer[88]: CGXSetWindowTransform: Operation on a window 0x92 requiring rights kCGSWindowRightPresenter by caller com.apple.preferences.interneta
5/31/14 11:07:41.496 PM com.apple.preferences.internetaccounts.remoteservice[323]: CGSSetWindowTransformAtPlacement: Failed
5/31/14 11:07:49.286 PM System Preferences[300]: view service marshal for <NSRemoteView: 0x7f9d01545030> failed to forget accessibility connection due to Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated from this process.) UserInfo=0x6000002617c0 {NSDebugDescription=The connection was invalidated from this process.}
timestamp: 23:07:49.286 Saturday 31 May 2014
process/thread/queue: System Preferences (300) / 0x100a42000 / com.apple.NSXPCConnection.user.endpoint
code: line 2972 of /SourceCache/ViewBridge/ViewBridge-46.2/NSRemoteView.m in __57-[NSRemoteView viewServiceMarshalProxy:withErrorHandler:]_block_invoke
domain: communications-failure
5/31/14 11:07:56.883 PM com.apple.preferences.internetaccounts.remoteservice[323]: [AOSUI] : __48-[MMAccountsService _handleSecureBackupInvalid:]_block_invoke called but secure backup is still valid: TR: N RI: N
5/31/14 11:09:18.017 PM xpcd[163]: restored permissions (100600 -> 100700) on /Users/Docsloat/Library/Containers/com.apple.TextEdit/Container.plist
5/31/14 11:09:18.686 PM com.apple.appkit.xpc.openAndSavePanelService[346]: assertion failed: 13D65: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
5/31/14 11:09:18.708 PM com.apple.appkit.xpc.openAndSavePanelService[346]: assertion failed: 13D65: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
5/31/14 11:09:18.774 PM com.apple.appkit.xpc.openAndSavePanelService[346]: Bogus event received by listener connection:
<error: 0x7fff77884b50> { count = 1, contents =
          "XPCErrorDescription" => <string: 0x7fff77884e60> { length = 18, contents = "Connection invalid" }
When I first installed Mavericks I did not understand the Internet Account setup and struggled with the iCloud setup. I tinkered/removed the default Internet Account settings email settings. I suspect that may have something to do with these error messages. I believe I should start over fresh with my new install on my new hard drive and start the iCloud settings from scratch.

Imposer un format à une commande de type chaine

Bonjour,
je souhaite réaliser une commande de type chaine qui ait un format bien particulier. La chaine doit être un nombre compris entre 101 et 120 (c'est bien une chaine que je souhaite et pas un nombre).
Est il possible de fixer un format spécifique à une commande de type chaine (ici 3 caractères représentant des chiffres de 101 à 120)?
Je souhaite que la vérification se fasse tant que l'on est pas en run. (il n'est par exemple pas possible de mettre un "t" dans un champ nombre, ainsi je souhaite que dans mon champ chaine il ne soit pas possible d'écrire "156" ou "rgf" par exemple)
Merci

Rebonjour ceci est possible mais uniquement en mode RUN pour l'instant. Le plus simple est de mettre trois controles différents pour indiquer lequel n'est pas rempli de manière correcte et de les concatenner (rabouter).
It would be nice if you take the time to rate this answer
http://www.machinevision.ch

Comment changer la couleur de fond d'un control type indicateur de vitesse ?

Bonjour à tous,
Je suis à la recherche de 2 choses pour une interface graphique pour une chaine d'acqusition.
La première :
- Comment changer la couleur de fond d'un indicateur de type "Gauge" pour donner une allure d'indicateur de vitesse.
La deuxième :
- J'aimerais afficher également cette vitesse de façon alphanumérique comme les afficheurs digitaux.
Comment puis-je faire celà
Merci à vous
Bonne journée
Z.

Merci de la réponse en fouillant j'ai trouvé une partie de la réponse par contre pour l'affichage digital j'aimerais un affichage de ce type (cf pièce jointe)
Pièces jointes :
XL_Digital.jpg ‏5 KB

Sybase in Un-Chained mode

I'm contemplating the use of OTG with Sybase, but I don't need any transaction coordination.
The documentation at http://download.oracle.com/docs/pdf/A96550_01.pdf clearly states the stored procedures on the Sybase side must be written for chained transaction mode. This makes sense from the perspective of the Oracle transaction coordinator.
But Chained Transaction Mode is a no-no for Sybase best practice. I can accept that the Sybase concurrency model is atrocious, but there is no reason for making things worse than they really are. My question is: Would the Gateway object, if my Sybase procedure executes a Set Chained Transaction Mode Off ?
In other words, the stored procedure will break out from Chained mode. It will do most of its work outside of any transaction, then start and commit a short transaction at the end. This is how well-written Sybase stored procs operate.
I'm aware that Oracle won't able to roll back whatever has been committed by Sybase. But this is not my goal. I just don't want the Gateway to enforce Chained mode.

Hi Mohammed,
Jeff's description is very close.
The sap_hostavailable command is executed in DR Agent when the the 'failing' host is a failover situation is once again available.
The Replication paths and queues from that old host to the current HADR primary are purged (we don;t want any stale activity from the old HADR primary to corrupt what has already occurred at the new HADR primary). And to perform that asction in Replication Server, the server is placed in hibernation mode - queues are purged - and the hibernation mode is released.
In your case, it appears some prior process placed the Replication Server in hibernation mode, but did not complete its task.
I noticed in the first jpeg, the sap_hostavailable command failed because it thought the command was being executed against the wrong host. Perhaps this is an indication the initial failover itself did not execute successfully? ('sap_status task' shows the status ofthe last asynchronous task executed - if failover was the last task, the status may still be viewable).
Regardless of how we reached this state, Marks recommendation to execute sysadmin hibernate_off in the Replication Server, then re-run the sap_hostAvailable command.
Regards,
Stephen

Rafraîchir indicateur chaine

Similar Messages

Maybe you are looking for