Raid 0 (stripe) double space?

I've a MSI K7N2 Delta-ILSR and 2 HD Maxtor 80 Gb SATA in RAID 0.
All datas, included hidden and system files, take 3.3 Gb of Hard Disk space, but when i check the occupied space (right click on HD than proprieties) it says me 6.6!! Why? What's wrong?

it also depends on the size of your stripes.
If your system is mainly composed of small files and you have 64kB strippes, then each and every one of thoses are taking 64k (yes, even the 1byte files).
Easy way to verify:
 - in RAID 0, you'll have ~160GB of space on the disk, 80GB in RAID1
 - select all your files in your drive and do a properties. It will show you the number of files, total size and size on the drive.
It could also be that you have a trash protector like norton that keeps your files from getting deleted, so it counts in the used space, but does not appear...

Similar Messages

  • Automatic Double-Space after inserting a character (eg. &)

    Hi,
    I haven't had this problem previously, but recently whenever I type a bracket or 'and' symbol it automatically inserts a space after the space. For example...
    "everything was great (Decker,2004)." as opposed to "everything was great (Decker,2004)."
    How do I turn off this automatic double-space? I've looked everywhere, can't figure it out.
    Thanks

    laurasilver wrote:
    I haven't had this problem previously, but recently whenever I type a bracket or 'and' symbol it automatically inserts a space after the space. For example...
    "everything was great  (Decker,2004)." as opposed to "everything was great (Decker,2004)."
    Hi Laura,
    The forum is working against you as well. The forums software strips out extra spaces in the display of a post, although it shows them in the compose window, which let me locate them. I replaced the pair with sticky spaces, so the line above (and below without the quotation formatting) should appear more as you typed it.
    "everything was great  (Decker,2004)." as opposed to "everything was great (Decker,2004)."
    The first place to check is Pages > Preferences > Auto Correction. Someone may have added this to the auto correction list. Unlikely, due to the number of steps that would have to be taken, but possible.
    Regards,
    Barry

  • Pages 08 double space

    how do you double space in Pages 08 and how do you do 1-inch margins?

    Why not search for "spacing" in the Help?
    Why not search for "margin" in the Help?
    +-+-+-+-+-+-+-+-+
    Worried Life Blues 2008
    Discussions
    +Apple Discussions, launched in August, 2000, have grown rapidly in usage and features. The main features include personalization, subscription capabilities and email capabilities. _For information on how to use Discussions, please visit the Discussions Help Page_. Cookies should be enabled and an Apple ID account is required if you would like to contribute to the discussions.+
    +*What is Apple Discussions and how can it help me?*+
    +
    Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. … You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.+
    +_If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages._+
    +*I have a question or issue*—+
    +how do I search for answers? _
    It's possible that your question or issue has already been answered by other members so do a search before posting a question._ On most Apple Discussions pages, you'll find a Search Discussions box in the upper right corner. Enter a search term (or terms) in the field and press Return. Your results will appear as a list of links to posts below the Search Discussions Content pane.+
    +Search tips are available here:+
    +http://discussions.apple.com/help/search-tips.html+
    +-+-+-+-+-+-+-+-+
    Yvan KOENIG (from FRANCE mardi 23 septembre 2008 12:14:28)

  • Double space report

    Hi All,
    How to find double space and generate report in text file with line number.

    save the previous record in a data variable and compare with present loop record.
    Like.
    LOOP AT itab.
      IF current_record = previous_record..
         skip 1.
      else.
         SKIP 2.
      ENDIF.
    previous_record = current_record.
    ENDLOOP.
    Regards,
    Wasim Ahmed

  • How do I double space on the new Pages?

    I updated the other day to Pages V 5.0.1 and now I can't find a way to double space my text. Anyone?
    Thanks.

    Hello,

  • How to double space in Pages for iPad?

    How to double space in Pages for iPad?

    Double spacing is double spacing whether you are using Pages or Word. Double spacing is dependent upon the font size that you are using in the document no matter which word processing app that you use.
    Pages on the iPad has limited fonts and chances are pretty good that if you import a Word file into Pages on the iPad, there will be some formatting or font issues.
    But once again, Helvetica in Pages is pretty much the same Helvetica as you would be using in Word. If you use a font in Word that is not available in Pages, you will see a warning message that some elements of the original document have been changed.

  • Double space after apostrophe in iMessage

    Ever since I updated to Mavericks, iMessage on my MacBook Pro (mid 2012) adds a double space after I use an apostrophe! It also doesn't save my background color preference (but it does save font color, font, and other user's font and color). It only shows up for me, not for the person I send the message to.
    It looks like this:

    Hi,
    The Original Poster newer came back with any more info on the subject.
    This also left her Balloon (or Background) colour unresolved as well.
    In Messages 8 (Mavericks) the Smiley function now uses the Emoji font to create the Smilies.
    In iChat versions and Messages 7 you could show the Smiley drop down and mousing over the Smilies would reveal the text keystrokes that would be needed to create it if typing them.
    This does not happen with the Emoji Font.
    However most of the icons are created by double character info which may mean a keystroke might just be invoking it.
    Playing with these settings may provide something.
    9:04 pm      Saturday; December 21, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Double space period please in MAIL App!!!!!

    Apple -
    Anyone at Apple -
    Please please please tell someone to have a double space create a period at the end of sentences.
    Switching back and forth between the keysets is maddening.
    It's such a simple request... please.

    Here's a great workaround tip from David Pogue's website...
    Basically, you can type a period with ease if you simply press the ‘.?123’ key, then keep your finger on the screen and just slide it up and over a bit to the period when the numeric keypad appears. Amazingly, this key reacts as soon as your finger touches it (no lifting required), and the numeric keypad will automatically disappear when it does, leaving you right back where you started with the normal keyboard active—and with a period in your document! And instead of multiple taps, it took but one.
    This trick works for any of the keys on the numeric keypad, but it’s most useful for the period and comma. While I’d still prefer to have the period and comma on the main keyboard, this is a really good workaround.

  • Double space issue in word 2010

    Hi,
    I am currently converting all my word 97 documents to word 2010.
    I need to mail merge the document.
    In the development mode of word the double space is present after period (Full stop).
    After generating the document through application , the double space is not appearing.
    Eg.,.
    Before : to.  But 
    After Generating: to.But
    Thanks.

    Hi Pradeep,
    I am wondering whether you could reproduce your issue manually. If it also occurs when you manually generate, it seems to be a product related issue. If it works correctly when you manually generate, but not correctly in your development, I recommend you
    share more details about your program and it would be helpful if you could share us a simple demo to reproduce your issue.
    If your issue is a product related issue, I would recommend go to the link below for help:
    # Word IT Pro Discussions
    https://social.technet.microsoft.com/Forums/en-US/home?forum=word
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • Double space for period. How about comma, too?

    It's already kosher with the interface guidelines to
    double space at the end of a sentence to get a
    period, so how do I get people on the bandwagon
    to make the spacebar a dual- or tri-function spacebar:
    double tap for a comma, period, or question mark:
    |   ,   |   .   |   ?   | <-----spacebar with
    -----------------------           punct zones
    Double-tap at the left edge for comma space, double-tap
    near the middle for period space, and at the right edge
    for question mark space. Why have to go to a separate
    screen to type a comman and then come back to the text
    keyboard? That's inifficient.
    Comma, period, and question mark. That hits most of the major
    marks used. Yeah, there's the exclamation point, but the
    real estate on the spacebar reliably handles only three
    marks. Four may be hard to employ, but I may be wrong.
    I suggested this to Apple two years ago, and nothing's
    been added to the OS.
    Comments?
    Doug Parker
    Orlando, FL

    Firstly, when I said InDesign inflates the space I didn't mean it whacked in a great chunk of space. It just gives a little bit more air relative to the fit of the text around it. You may not always see any noticeable difference. But when I read a book I don't want to see obvious white spaces at the start of every sentence. As long as the full point and following capital letter register on my brain fast enough that I am reading a new sentence, that's good enough for me. I think it makes reading more fluid. If you want to see extra space at the start of a sentence, then it's probably best to carry on with your double spacebar - unless you want to try something more exotic like a fixed width space.
    I didn't mean you to literally type <full point><space><any character> into the find. I was just trying to tell you what to input. Type the full point, hit the spacebar, and then use the options list to the right of the find field (shown as a @), select "Wildcards", then select "any character". What you should see in your find field is . ^?
    You could then enter .  ^?      - that's two spaces. See why I spelled it out as <space>? -  into the change to field.
    k

  • How to change double spaces to single space

    For some reason that I don't know about, the majority of the
    time that I download a PHP or HTML document from the web server to
    my local PC the document gets double spaces injected into each line
    of code. In HomeSite there is a simple command in the menu to
    change double spacing to single spacing. Why does Dreamweaver not
    have this, or if it does, then where is it? I cannot spend all of
    my time mannually removing each double spaced line. I tried the
    search and replace for this, but then I loose my tab formatting and
    it makes the code hard to read. Can anybody help or point me to an
    extension that works for this or sdomething? Or, do I just need to
    reload HomeSite and work in it instead of Dreamweaver?

    "carl@csi" <[email protected]> wrote in
    message
    news:fgn8sd$bn4$[email protected]..
    > For some reason that I don't know about, the majority of
    the time that I
    > download a PHP or HTML document from the web server to
    my local PC the
    > document
    > gets double spaces injected into each line of code. In
    HomeSite there is a
    > simple command in the menu to change double spacing to
    single spacing.
    > Why
    > does Dreamweaver not have this, or if it does, then
    where is it? I cannot
    > spend
    > all of my time mannually removing each double spaced
    line. I tried the
    > search
    > and replace for this, but then I loose my tab formatting
    and it makes the
    > code
    > hard to read. Can anybody help or point me to an
    extension that works for
    > this
    > or sdomething? Or, do I just need to reload HomeSite and
    work in it
    > instead of
    > Dreamweaver?
    Open the find/replace dialog, and check "Use regular
    expressions".
    then type the following in the search box
    \n\s*\n
    and type Ctrl-Enter in the replace box
    this should replace double line-breaks (with or without
    whitespace between
    them) with a single one.
    Joris van Lier

  • How to double space in Mail?

    How does one double-space in Mail? If copy double-spaced text and paste in Mail email, it comes out as single spaced.

    After much trial and error I found one solution. In the document file, clear all styles formatting. Then format the text again but do not assign it a style. Leave it as "normal" with your manual formatting. Then when you copy and paste the formatting is maintained in Mail. It seems to be that the assigned styles in the Word file (or Pages) is causing the problem.

  • How do i remove double space in messages?

    All of my Mail using Apple Mail has double spaces in them how do I do I change to single-space?
    Sebastian

    Yes. That is the technique I traditionally use to drop an image into text. I even cut and pasted again as you suggested with the same result. Trust me, this is driving me nuts. I'm not doing anything different than before, but my results are different, even within the same document. I'll attach a few examples, all from this same document.
    How the space after my in-line image is supposed to look:
    And then a few of the pages with the mystery gap:

  • Please Help!  I have been writing using - Pages - app for years.  I still can not figure out how to make single spaces between paragraphs.  Pages automatically double spaces between paragraphs.

    I have been writing on - Pages- app for several years.  Pages automatically uses double space between paragraphs. I can not figure out how to make single space between paragraphs. Tried everything.  Please help!  

    Pages User Guide >  http://manuals.info.apple.com/en_US/Pages_UserGuide.pdf
    Open the user guide then press Command + F on your keyboard.
    Type line spacing in the search field top right corner of that window.

  • Can't double space anymore in TextEdit halp!

    I just went to double space my term paper today, and realized, I couldn't!
    under format < text I have no options other than writing direction, they're all in shadow so choosing them isn't even an option.
    I use to be able to do this, along with other things I now can't do! But I have no idea where they went.
    Any ideas on how to fix this, so I can double space my documents would be fabulous!

    maybe i've posted in the wrong area. I have 10.4.10.
    I don't know if that makes a huge difference, when i did my last software update, textedit seemed unchanged.... perhaps something has accidently been deleted that is causing it to disrupt ?
    but anywho: to GET to that contextual menu, you must first ( on my text edit version )
    go to format, then text, then the spacing option is there right above link, list and table, and below show, copy, and paste ruler options.... I KNOW where I'm to go.... but I'm saying, it doesn't give the option to choose spacing....
    i kinda want to give up.... but still... I kinda don't! bahhh!!!

Maybe you are looking for

  • SYSTEM and SYS password 11g on Windows Vista

    Hello I am having trouble. I do not know my SYSTEM and SYS passwords. I am using oracle 11g on windows vista. I tried to change the passwords but that did not work. I tried this: c:/>sqlplus "/ as sysdba" c:/>show user c:/>passw system then I changed

  • Note II will no longer sync email after software update

    After I let the last major install update  I cannot sync my MS Exchange or yahoo accounts  both of which are critical for business.  I have set all the options for syncing  and tried different ways.  the message says cannot connect to server  but all

  • HP LaserJet P1102w Not Working with Mac when connected via USB

    I'm using an old HP LaserJet P1102w - I installed the drivers and the software, and when I connect to my computer, nothing happens. It recognizes the printer, and it says that it's using "Generic PCL Printer" as the driver. The Print Queue has a good

  • SNC 'due quantity is Zero' error in Release prcesse - ASN creation.

    Hi~ I am facing problem while creating the ASN' s for the Schedule Line releases. Error message is " Schedule line due quantity is Zero". But due quantity field is not getting populated when I create confirmations and also it is not editable. Status

  • Unable to 'Verify Disk'...Needs Repair

    Good morning. I have a late 2008 MacBook Pro. About a month ago I installed Snow Leopard 10.6.3. After the install I noticed things running a little more sluggishly than Leopard 10.5.8. I went to verify the disk and noticed some needed repairs. See t