RAID 1 - DiskUtility will not allow me to use Macintosh HD as a slice.
Hi All,
I have a fully functional Mac Mini with the 80gig HD, I have been using it for about a year and just love it (Windows convert). I have just purchased a 160gig Lacie Brick and have decided to partition it into two 80gig partitions and use one of those partitions as a slice for a RAID 1 configuration. So basically I want to mirror my internal 80 and my external 80. When I go to DiskUtility, and attempt to create my RAID, it does not allow me drag the "Macintosh HD" to be a slice in the array. Is this because it is the boot partition? This drive is one single partition, at least from the untrained eye, I am sure there is a boot partition somewhere on it. Is this something I can even setup? DiskUtility allows me to drag the external 80 to the RAID but not the internal 80.
Any help or guidance would be appreciated.
Thanks,
Dave
Mac Mini 1.42 Mac OS X (10.4.2)
Mac Mini 1.42 Mac OS X (10.4.2)
I have a fully functional Mac Mini with the 80gig HD,
I have been using it for about a year and just love
it (Windows convert). I have just purchased a 160gig
Lacie Brick and have decided to partition it into two
80gig partitions and use one of those partitions as a
slice for a RAID 1 configuration. So basically I
want to mirror my internal 80 and my external 80.
When I go to DiskUtility, and attempt to create my
RAID, it does not allow me drag the "Macintosh HD"
to be a slice in the array. Is this because it is
the boot partition? This drive is one single
partition, at least from the untrained eye, I am
sure there is a boot partition somewhere on it. Is
this something I can even setup? DiskUtility allows
me to drag the external 80 to the RAID but not the
internal 80.
Any help or guidance would be appreciated.
Don't think this is possible in a RAID configuration, since your external drive is not connected to the mini in the same manner as your internal. Normally RAID systems use the same type of controllers. If you want to backup your internal drive, try setting up a cron job that copies your data some time in the early morning...
Similar Messages
-
My iPhone will not allow me to use the slide feature. I have restarted the phone several times. any suggestions?
Try rebooting. Press and hold BOTH the power and home buttons at the SAME time until the Apple Logo appears, then let go of both buttons and your iPhone should restart. See if you can use it when it comes back up.
-
Purchased an ipad but already got apple id through itunes and iphone but is not an email address, ipad setup process will not allow me to use current id or change id to primary email address - do I have to have different id for ipad
It does have to be a verifiable email address though, you can change it here:
Apple ID support
http://www.apple.com/support/appleid/ -
I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes. I'm not sure of what to do. It's quite frustrating, and all I need is advice, and help. I would much appreciate it. Thank-you.
In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi. -
OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old opeopen directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.
I wonder if the disk being referred to is actually your iPod which is not plugged in. Maybe something has stuck thinking the iPod should be there.
Try completely removing all the iTunes related programs according to this method.
http://support.apple.com/kb/HT1923
Restart you PC and see if startup improves.
If it doesn't improve you need to consider the possibility that there is something else going on.
If The problem goes away, hopefully a fresh install will be OK. -
I receive the notice that my HTTP proxy will not allow me to use HBO
I Received the notice that my HTTP proxy will not allow me to use HBO
- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Download/install a new app
- Restore from backup
- Restore to factory defaults/new iPod -
I have a Finger Print Reader on my Laptop and when I go to a logon screen it says this not a logon screen and will not allow me to use my Finger Print Reader to logon. When I use IE it works fine. Can u please help me with this its the only negative I fined with Firefox everything else is AWESOME!! Thanks, Anthony
The driver I have is the most recent version. This is a Firefox problem....fix it!
It works perfectly on Internet Explorer and worked on Firefox before the last update so it's your problem. -
My old iphone was replaced today, due to faults. Now it will not allow me to use my credit card account for the appstore and itunes?
Please don't tell me to retry, or re check my information because it is all correct, it basically says u cannot use thi account due to it being connected to another device... which is my old fault iphone, at the apple store.I have never before heard of cards being locked to a single device... but your case has shown me that it happens.
If I am getting it right you try to log in to your account and it asks for billing information, and when you enter your card details it tells you that the card cannot be used. If that is the case then I'm sorry to say that my only suggestion would be to contact iTunes support directly; the contact form can be found in here: Apple - Support - iTunes Store - Contact Us -
MBA will not allow me to use both usb ports at the same time.
My MBA will not allow me to use both usb ports at the same time. as soon as i plug the second in the first is disabled. trying to use a modem and printer.
What kind of peripherals are you connecting? Sometimes if an external device is drawing too much power, then it will shut down one of the USB ports. Make a test connecting two usb flash drives, it should work ok.
-
My wireless router in my home has failed. I purchased a new router, but it will not allow some of the characters which I used for my old password. Therefore I cannot access the internet with my ipad mini or my ipod touch. I am unable to change the password on either device. How do I go about changing the password on these units so that I can access the internet? Thanks
Terry Beckinghamhttp://www.apple.com/support/appleid/contact/
-
I have a virus that has taken over Safari and will not allow me to browse of even shut down the computer. The request is to send $1,000 to a "green dot" address to get the virus removed.
Help!
lawrencefromchathamCommand, option and escape keys held down together will open the "Force Quit" dialog window.
Quit Safari and then relaunch it while holding down the shift key. -
Why is itunes not allowing me to use my new email address? Itunes wont authorize to me to dowload anything - I haven't accessed Itunes for over a year during that time my computer crashed, I had to change email addresses and things got lost...like passwords and so forth and so on...I recieved two emails to [email protected] from itunes saying all was good and then all wasn't good. Please, can you help me!
I suggest you go to Apple's ID site, log in and update everything. Then you will surely get a confirmation mail.
Once all is done, you will most probably be able to log in to the iTunes store again. -
i have a new computer and the itunes store will not allow me to redeem my remaining balance. How to handle.
Details, please. What exactly is happening? How is it "not allowing you" to redeem your balance?
-
TS2755 restored ipod to factory settings, now imessage will not allow me to use my email address
I restored my daughters ipod to factory settings after she forgot her password. Now imessage is not allowing me to use her email address, and it tells me it is use on another device. Help!
Maybe here:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities -
Have downloaded the latest PhotoShop CC but will not allow me to use Perspective Warp, why?
I am trying to use the latest tutorial about Perpective Warp. I have done the most recent download update today but when I go to edit, the Perspective Warp option is grayed out.
Photoshop grays thing out when some condition does not allow it to be use. The condition could be related to the current state of the active document, or related to hardware and software. Like Perspective Warp requires a GPU and may also require some amount of VRAM. Photoshop CC requirements state Video Adapter with GPU and at least 512MB VRAM. Check you Photoshop Preferences.
Photoshop menu Edit>Preferences>Performance GPU must be seen and enabled.
Maybe you are looking for
-
Where can I actually try holding a 6 Plus?
Everywhere I've been, the iPhone 6 Plus is held down on the counter by a bracket. I'd like to be able to hold one, try putting it in my pocket, see how it fits my hand, etc. Seems ridiculous to have to buy one at the Apple store, take it out of the
-
View zview is not defined in the runtime repository that was loaded.
Hi, I created an enhancement for component BT111H_OPPT and created a view "ZVIEW" in it.When i clock on my ZVIEW i am getting the following message: view zview is not defined in the runtime repository that was loaded. What does that imply? Isnt the
-
Alt. key validation error blocks application (when attr is null) - bug?
Hi OTN, I have an entity object on which an alternative key is defined: <Key Name="SortingIndex_XAK2COMPONENT" AltKey="true"> <DesignTime> <Attr Name="_isUnique" Value="true"/> <Attr Name="_DBObjectName" Value="COMPONENT_BA"/>
-
Hi all, I have a very weird bug going on. After i come back to a song that i have saved (maybe the previous day) i find that some plugins have addopted completely different settings to the ones i have saved. This can happen to any number of tracks (i
-
I have recently purchased imovie 11, which no longer comes with idvd. I have created a project and want to burn it to a dvd - but without idvd is it possible? Surely it must be?