Raid 1 error message with ASC: 0x11, ASCQ: 0x0, FRU: 0xf

Dear All,
There is a error message with ASC: 0x11 (unrecovered read error), ASCQ: 0x0, FRU: 0xf
And I reference the documentation at http://docs.oracle.com/cd/E19105-01/storedge.6320/817-5918-10/817-5918-10.pdf The error messages means:
"The RAID controller firmware, during a normal read or volumes verification operation, corrects the bad sector on the drive by reconstructing the
data (assuming a RAID 1+0 or RAID 5 configuration) and writing it back to the drive. The drive, in turn, writes the data to a spare sector.
Ensure that the volume is scrubbed on a regular basis. If the volumes in the RAID device are configured as RAID 0,
then the data is lost and drive replacement is required."
But I am not understand if the harddisk in RAID 1. Is that the harddisk with problem will write the data to a spare sector but the other mirrored
harddisk will not write to the spared block due to mirroring or they both write the data in the bad block to the spared block?
If the data in the bad block moved to the spare sector in both mirrored harddisks.
Is that the whole mirrored group will reuse the bad sector again after replacement?
If the Mirror is built up by Veritas not the Solaris Volume Manager. Is there any difference?
Thank You!
Edited by: 960831 on 2012/9/23 下午 9:03
Edited by: 960831 on 2012/9/23 下午 9:04

It appears that SCSI disk #178, in an external array, has a bad data block
and that the specific data block is #7564160. That data block
additionally translates into sector #7560064 of LUN#1.
Your computer system is finding it difficult to read whatever is in that part of the drive.
Repair that disk by marking the block as unusable,
or you can just replace the disk and rebuild the LUN.
I've never had to do that, personally.
That's what service contracts are for. The vendor does it for me.
It seems that it is time for you to open a service case with the array vendor.

Similar Messages

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day!

Error message with hyperlink

Hi Champs,
I have requirement in which I need to display an error message in SRM Portal.The error message is maintained in the SAP SRM system and can be viewed through SE91.
We are using SRM 4.0 Version.
I need to display the below error message with a hyperlink to a particular site:
Profit Center of plant and CO do not match, CO belogs to plant XXXX (item link)"
Is it possible to have hyperlink with an error message.
Thanks
Regards,
Nishant

Hello
It is no possible.
But you may add hyperlink into documentation for message (SE91 -> Goto -> Documentation -> Long text).
In this case hyperlink will be available after double click on error icon in left bottom corner.
PS: and not duplicate posts.

Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

Moved thread to Android development.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.

Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

Displaying an error message with a link to the error field

By default, ADF validation usually displays an alert with an error message and a link to the error field.
I have some custom validations where I finally display the error message with this:
public static void MessageError(String messageText){
    //String messageText="No se han encontrado estos datos";
    FacesMessage fm = new FacesMessage(messageText);
     * set the type of the message.
     * Valid types: error, fatal,info,warning
    fm.setSeverity(FacesMessage.SEVERITY_ERROR);
    FacesContext context = FacesContext.getCurrentInstance();
    context.addMessage(null, fm);
My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
Is there any way to get this ?

Can't you include this in your message?
You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
Timo

HT4910 My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

Error Message with multiple line

Hi
How to display a error message with multiple line?
Example
     Goods movement not possible for material 101
     Goods movement not possible for material 102
     Goods movement not possible for material 103
is it possible is ABAP? If so please advice me.
Best Regards
Asheek

Hi Anoop,
You can use same thing like this
I suggest write ur message through this.
First set the obecj.
CALL FUNCTION 'APPL_LOG_SET_OBJECT'
for local memory
FUNCTION 'APPL_LOG_WRITE_MESSAGES'
         EXPORTING
              OBJECT              = OBJECT
              SUBOBJECT           = SUBOBJECT
              UPDATE_OR_INSERT    = UPDATE_INSERT_FLAG
         TABLES
              MESSAGES            = MESSAGE_TABLE
         EXCEPTIONS
              OBJECT_NOT_FOUND    = 1
              SUBOBJECT_NOT_FOUND = 2
              OTHERS              = 3.
the call for physical memory
CALL FUNCTION 'APPL_LOG_WRITE_DB'
In this process you only need to provide the Itab with error messages.
Reg,
Arpit

I try connecting to I tunes i get an error message with the error message IxE000068 any ideas

my ipod touch will continually be in the spinning wheel like it is shutting down mode and occasionally go to the start up screen nothing else. i tried connecting to the itunes and got an error message with the code IxE8000068 and saying itunes could not be connected to this ipod

Did the error number really start with
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

HT4236 I get an error message with I try to plug into itunes; This iPhone cannot be used because the Apple Mobile Device service is not started.

I get an error message with I try to plug into itunes;
This iPhone cannot be used because the Apple Mobile Device service is not started.

http://support.apple.com/kb/TS1567

Show error message with multilingual in ADF Jdeveloper 10g 10.1.2

Hi
I want show error message with multilingual in my application, but i don't know how to do.
Can you give me some solution.
I live in vietnamese.
Thank a lot.

When i using code
ResourceBundle bundle = ResourceBundle.getBundle("MyResources",Locale.ENGLISH);
String key = "hello";
String s = bundle.getString(key); // Hello
key = "bye";
s = bundle.getString(key); // Goodbye
then there is error follow
java.util.MissingResourceException: Can't find bundle for base name MyResources, locale en
     at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:804)
     at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:773)
     at java.util.ResourceBundle.getBundle(ResourceBundle.java:538)
     at mypackage1.Application1.main(Application1.java:21)
Can you show where error or you have some code about that issue, you can show me

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly. I have uninstalled/reinstalled evernote but it still doesn't work. Anyone know where evernote stores their files on a Mac/

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it. I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work. Anyone know where evernote stores their files on a Mac? Or had this problem.

Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem.

I keep receiving a server error message with the new beta version of iMessage. What can I do to fix this?

I keep receiving a server error message with the new beta version of iMessage. What can I do to fix this?

Ok I have a question.
Why do you want to use Beta software? Especially since you are having this problem with it?
Uninstall it and forget about it until it is released as a real piece of software.

Error messages with iTunes 11.0.1....

I am getting a series of error messages with iTunes 11.0.1.... (-42076) & (-50) and cannot download any app updates...everything else seems to be fine.....
anyone any ideas.......

Mmmmmm how strange.... have just closed and reopened and problem seems to have cleared.....

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
Uninstalled Acrobat 9, reinstalled, still same problem.
Help please!

Yes I can it only happens in the browser..
I reinstalled Windows on my machine and started over a couple of weeks ago.
When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
Ever since then I get the error when something is downloaded and opened in the browser.
Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
Not sure what to do..

Raid 1 error message with ASC: 0x11, ASCQ: 0x0, FRU: 0xf

Similar Messages

Maybe you are looking for