RAID 1 with SATA on Linux

Hello!
I have a new system with the next configuration : mainboard - MSI 865PE Neo2 FIS2R; Intel P4 2,8 Ghz HT; 1 GB RAM dual chanel, 2 x SATA HDD (120 GB each).
My main problem is that I try to install Suse 9.1 Professional on this system. I can't make the linux see the disks like they are in a RAID 1 array. I set them to RAID 1 form the mainboard BIOS uility (press Ctrl-I after BIOS loads). There doesn's seem to be any linux driver on CD or floppy disk.
Has anyone encounter this problem? Do I need some linux drivers for this to be
acompilshed?
Thanks.

You aren't going to find any Linux drivers from MSI. The ICH5R chipset is Intel, and I have read somewhere that it is possible to configure for raid. The SATA drives show up differently depending on whether you use kernel 2.4 or 2.6. Try Google.

Similar Messages

  • P55-GD65 (Bios 1.6) Need help with RAID-1 and SATA DVD-RW

    Sorry if this has been already asked; did a search.
    Trying to configure 2-Seagate Barracuda 7200.12 750 GB drives in a RAID-1.
    I also have a SATA DVD-RW plugged in as well.
    I enabled RAID mode = RAID in BIOS, pressed CTRL-I when booting to enter Intel's RAID configure screen, when there set the RAID 1 volume, exited.
    Booted into Windows XP, went to load the RAID driver and..... no DVD-RW to read the disk. ?
    Back in the BIOS, sure enough, all the SATA devices had disappeared except for SATA 7.
    Is this a restriction of Intel RAID - that you have any RAID, all the SATA ports are RAID only?
    I couldn't find any settings to choose which SATA ports are RAID and which are not.
    Thanks,

    Quote from: NovJoe on 11-February-10, 22:03:57
    Try to move your DVD drive to another SATA port.
    I did end up moving the DVD-RW to SATA7 and yes it shows up always.
    But that is a disappointment. Apparently, with these Intel SATA controllers, RAID is an all or nothing proposition - turn on RAID and that will be the only use for SATA1-SATA6. At least that's my theory; Intel doesn't spell this out. This is a bummer for me, as I had hoped to use SATA1 and SATA2 for a RAID-1 and hang other devices off SATA3-7.
    I could use the Jmicron RAID, as that uses just two ports, but that occupies SATA7 and SATA8, and (apparently) SATA8 is the eSATA connector on the rear panel - not very useful for a RAID.

  • Trying to setup RAID 1 with new SATA drives on xserve 2009 model

    Trying to setup RAID 1 with new SATA drives on xserve 2009 model
    I have an Xserve rack mount model Xserve 2.26 Quad Core (EMC# 2279) with an Apple RAID card, 24GB RAM (running 10.9 Server software)
    Purchased two Western Digital 1TB SATA III 7200 RPM 64MB Cache Black WD1003FZEX drives
    It came with three 160GB SATA drives.  I'm leaving one of the original 160GB drives for the OS, but I want to replace the 2 other drives and set it up with RAID 1 (mirrored). I bought 2 brand new Western Digital 1TB SATA drives and formatted them on another Mac through Disk Utility with Mac OS Extended (Journaled) formatting.  I then placed the new drives in the Xserve and booted it up.  After I login it immediately gives me 2 error windows saying...
    "Apple RAID Card
    The Apple RAID Card installed in your system requires your attention."
    It has two buttons underneath this message allowing me to either select 'Ignore' or 'Open RAID Utility'
    I've tried to RAID the drives the Disk Utility and through the RAID Utility with no success.
    I have both drives mounted on the desktop, as separate drives, but I really need to set these up as a RAID 1.
    I've been reading other forums, where others have been able to get this to work by using a jumper on certain pins (5 & 6)of the drive to back down the transfer rate to 1.5 Gb per second.  I tried that and it didn't work for me. Maybe I used the wrong pins -- I just don't know.  I'm also wondering if there is some Apple firmware that is required on these drives?  I'm asking for help from anyone who has gone through this same issue.  Thanks in advance.

    UPDATE --  I had an issue with the RAID card battery, it was dead and I have since replaced it.  But I am still unable to setup the RAID 1 drive configuration.  Does anyone know if it has something to do with the faster transfer rates on these new drives.  Maybe they need to be clocked down with certain jumper settings on these Western Digital drives?  Or am I fighting a losing battle because these drives don't have Apple firmware?  Any help would be appreciated. Thanks.

  • [nForce] K7N2 Delta ILSR - Do i have to have raid with sata drive

    Hi guys,
    Probably a really stupid question, but here goes
    My machine has 1 ide HDD and 1 SATA HDD.
    The SATA drive is set up as raid0 and is purely used as a data disk. The OS(win xp pro sp1) is on the IDE drive
    The only way i could get the SATA HDD recognised by windows, was to set up a raid array with just the 1 disk.
    Pretty useless raid array i know.
    Did i have to do this or is there a way to have the sata hdd usable without having to set up a raid array
    Thanks
    John L
    MSI K7N2 DELTA ILSR
    ATHLON XP 2500 Barton
    2X512 MB PC3200
    Leadtek GF4mx460
    WD 8MB CACHE 80Gb IDE
    Samsung 120Gb Sata

    you have to do it for the controller to work
    but it has no effect on the drive
    you can move a regular drive on ide 3 back to a normal ide and its all fine

  • Booting problems with systemd, lvm, linux-ck-corex

    Hi everyone,
    since Friday I got some complications while booting my system.
    I use systemd, pulseaudio, bluez, network-manger, gnome and gdm as login manager.
    Every partition (root, home) without the boot and crypted swap partition is within a lvm volume group.
    Xserver with gdm starts but the login mask does not appear. (only the background, mousepointer, topbar with clock, energy etc. are shown)
    Switching to the getty2 works, but after typing username and password, nothing happens.
    Only some messages from systemd are poping up, saying it couldn't mount my home partition (timeout).
    That explains why I couldn't login.
    Shutting down the system via the powerkey works.
    Starting via a system rescue disk, mounting everything (including my home partition) and chrooting works fine.
    Journalctl shows that there are more problems.
    The network-manager times out.
    Gnome-shell with consolekit-daemon and Pulseaudio fails to communicate with bluez over the dbus.
    Some version information of the listed packages:
    % pacman -Qii pulseaudio systemd gnome-shell dbus networkmanager bluez consolekit
    Name : pulseaudio
    Version : 2.1-1
    URL : http://www.freedesktop.org/wiki/Software/PulseAudio
    Licenses : GPL LGPL
    Groups : None
    Provides : None
    Depends On : libpulse=2.1-1 rtkit libltdl speex tdb udev fftw orc libsamplerate webrtc-audio-processing libsystemd
    Optional Deps : avahi: zeroconf support
    bluez: bluetooth support
    gconf: configuration through gconf (paprefs)
    jack: jack support
    lirc-utils: infra-red support
    openssl: RAOP support
    python2-pyqt: Equalizer GUI (qpaeq)
    Required By : gnome-settings-daemon paprefs pulseaudio-alsa
    Conflicts With : None
    Replaces : None
    Installed Size : 5412.00 KiB
    Packager : Jan Alexander Steffens (heftig) <[email protected]>
    Architecture : x86_64
    Build Date : Thu Jul 19 21:18:15 2012
    Install Date : Fri Jul 20 12:02:20 2012
    Install Reason : Explicitly installed
    Install Script : Yes
    Description : A featureful, general-purpose sound server
    Backup Files:
    UNMODIFIED /etc/pulse/daemon.conf
    UNMODIFIED /etc/pulse/default.pa
    UNMODIFIED /etc/pulse/system.pa
    Name : systemd
    Version : 188-2
    URL : http://www.freedesktop.org/wiki/Software/systemd
    Licenses : GPL2 LGPL2.1 MIT
    Groups : None
    Provides : None
    Depends On : acl dbus-core libsystemd=188 kmod libcap pam systemd-tools=188 util-linux xz
    Optional Deps : initscripts: legacy support for hostname and vconsole setup
    initscripts-systemd: legacy generator for initialization scripts
    python2-cairo: systemd-analyze
    python2-dbus: systemd-analyze
    systemd-arch-units: collection of native unit files for Arch daemon/init scripts
    systemd-sysvcompat: symlink package to provide sysvinit binaries
    Required By : systemd-arch-units
    Conflicts With : None
    Replaces : None
    Installed Size : 4720.00 KiB
    Packager : Dave Reisner <[email protected]>
    Architecture : x86_64
    Build Date : Sat Aug 11 01:17:44 2012
    Install Date : Mon Aug 13 20:15:27 2012
    Install Reason : Installed as a dependency for another package
    Install Script : Yes
    Description : system and service manager
    Backup Files:
    UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.systemd1.conf
    UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.hostname1.conf
    UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.login1.conf
    UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.locale1.conf
    UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.timedate1.conf
    UNMODIFIED /etc/systemd/system.conf
    UNMODIFIED /etc/systemd/user.conf
    UNMODIFIED /etc/systemd/logind.conf
    UNMODIFIED /etc/systemd/journald.conf
    Name : gnome-shell
    Version : 3.4.2-1
    URL : http://live.gnome.org/GnomeShell
    Licenses : GPL2
    Groups : gnome
    Provides : None
    Depends On : caribou folks gcr gjs gnome-bluetooth gnome-desktop gnome-menus libcroco libpulse mutter nautilus networkmanager telepathy-logger
    telepathy-mission-control unzip
    Optional Deps : network-manager-applet: shell integration for networkmanager
    Required By : gnome-shell-extension-user-theme
    Conflicts With : None
    Replaces : None
    Installed Size : 6064.00 KiB
    Packager : Ionut Biru <[email protected]>
    Architecture : x86_64
    Build Date : Sat Jul 21 21:27:55 2012
    Install Date : Sun Jul 22 20:51:39 2012
    Install Reason : Explicitly installed
    Install Script : Yes
    Description : The next generation GNOME Shell
    Backup Files:
    (none)
    Name : dbus
    Version : 1.6.4-1
    URL : http://www.freedesktop.org/Software/dbus
    Licenses : GPL custom
    Groups : None
    Provides : None
    Depends On : dbus-core>=1.6.4 libx11
    Optional Deps : None
    Required By : avahi qt rtkit xfconf
    Conflicts With : None
    Replaces : None
    Installed Size : 68.00 KiB
    Packager : Andreas Radke <[email protected]>
    Architecture : x86_64
    Build Date : Sat Jul 21 13:15:36 2012
    Install Date : Sat Jul 21 14:30:09 2012
    Install Reason : Installed as a dependency for another package
    Install Script : No
    Description : Freedesktop.org message bus system
    Backup Files:
    (none)
    Name : networkmanager
    Version : 0.9.4.0-6
    URL : http://www.gnome.org/projects/NetworkManager/
    Licenses : GPL
    Groups : None
    Provides : None
    Depends On : dbus-glib iproute2 libnl nss polkit udev wpa_supplicant ppp dhcpcd libsoup
    Optional Deps : modemmanager: for modem management service
    dhclient: alternative DHCP/DHCPv6 client
    iptables: Connection sharing
    dnsmasq: Connection sharing
    bluez: Bluetooth support
    openresolv: openresolv support
    Required By : cnetworkmanager empathy gnome-shell libsocialweb network-manager-applet networkmanager-dispatcher-netfs networkmanager-dispatcher-ntpd
    networkmanager-dispatcher-openntpd networkmanager-openconnect networkmanager-openvpn networkmanager-pptp networkmanager-vpnc tracker
    Conflicts With : None
    Replaces : None
    Installed Size : 5232.00 KiB
    Packager : Jan Alexander Steffens (heftig) <[email protected]>
    Architecture : x86_64
    Build Date : Fri Jun 15 21:21:11 2012
    Install Date : Sat Aug 11 10:07:19 2012
    Install Reason : Explicitly installed
    Install Script : Yes
    Description : Network Management daemon
    Backup Files:
    MODIFIED /etc/NetworkManager/NetworkManager.conf
    Name : bluez
    Version : 4.101-1
    URL : http://www.bluez.org/
    Licenses : GPL2
    Groups : None
    Provides : bluez-libs bluez-utils
    Depends On : dbus-core python2 systemd-tools
    Optional Deps : gstreamer0.10-base: bluetooth GStreamer support
    alsa-lib: Audio bluetooth devices support
    dbus-python: to run bluez-simple-agent
    pygobject: to run bluez-simple-agent
    libusb-compat: USB adapters support
    cups: CUPS backend
    Required By : blueman gvfs-obexftp kismet obexd-client openobex pilot-link qemu-kvm
    Conflicts With : bluez-libs bluez-utils
    Replaces : bluez-libs bluez-utils
    Installed Size : 3452.00 KiB
    Packager : Tom Gundersen <[email protected]>
    Architecture : x86_64
    Build Date : Sat Jun 23 13:02:36 2012
    Install Date : Sat Aug 11 11:01:04 2012
    Install Reason : Explicitly installed
    Install Script : No
    Description : Libraries and tools for the Bluetooth protocol stack
    Backup Files:
    UNMODIFIED /etc/bluetooth/main.conf
    UNMODIFIED /etc/bluetooth/rfcomm.conf
    MODIFIED /etc/bluetooth/audio.conf
    UNMODIFIED /etc/bluetooth/network.conf
    UNMODIFIED /etc/bluetooth/input.conf
    UNMODIFIED /etc/bluetooth/serial.conf
    UNMODIFIED /etc/conf.d/bluetooth
    UNMODIFIED /etc/dbus-1/system.d/bluetooth.conf
    Name : consolekit
    Version : 0.4.6-4
    URL : http://www.freedesktop.org/wiki/Software/ConsoleKit
    Licenses : GPL
    Groups : None
    Provides : None
    Depends On : polkit zlib libx11 dbus-glib
    Optional Deps : None
    Required By : gdm gnome-session slim xfce4-session
    Conflicts With : None
    Replaces : None
    Installed Size : 720.00 KiB
    Packager : Dave Reisner <[email protected]>
    Architecture : x86_64
    Build Date : Sun May 27 06:29:53 2012
    Install Date : Fri Jun 1 19:13:35 2012
    Install Reason : Installed as a dependency for another package
    Install Script : No
    Description : A framework for defining and tracking users, login sessions, and seats
    Backup Files:
    (none)
    And the version of all the other packages:
    % pacman -Q
    3to2-hg 1.0-1
    a52dec 0.7.4-6
    aalib 1.4rc5-9
    abs 2.4.3-2
    accountsservice 0.6.22-1
    acl 2.2.51-2
    acpi 1.6-1
    acpid 2.0.16-3
    acroread 9.5.1-2
    acsccid 1.0.2-3
    activity-log-manager 0.9.4-1
    adns 1.4-3
    adobe-air 2.1-1
    adobe-air-sdk 2.6-2
    aisleriot 3.2.2-1
    akonadi 1.8.0-1
    alfont 2.0.9-6
    allegro 5.0.7-1
    allegro4 4.4.2-2
    alleyoop 0.9.8-2
    alsa-firmware 1.0.25-2
    alsa-lib 1.0.25-1
    alsa-oss 1.0.25-1
    alsa-plugins 1.0.25-2
    alsa-utils 1.0.25-3
    anjuta 3.4.4-1
    antiword 0.37-3
    apache 2.2.22-4
    apache-ant 1.8.4-1
    apg 2.2.3-3
    apiextractor 0.10.10-1
    apr 1.4.6-1
    apr-util 1.4.1-1
    aptana-studio 3.2.1-1
    aqsis 1.8.1-1
    archlinux-keyring 20120812-1
    argyllcms 1.4.0-4
    aria2 1.15.1-2
    art-sharp 2.24.2-2
    artwiz-fonts 1.3-7
    aspell 0.60.6.1-1
    aspell-de 20120607-1
    aspell-en 7.1-2
    at-spi 1.32.0-5
    at-spi2-atk 2.4.0-1
    at-spi2-core 2.4.2-1
    atk 2.4.0-1
    atkmm 2.22.6-1
    attica 0.4.0-1
    attr 2.4.46-2
    audacity 2.0.1-2
    aurvote 1.3-1
    autoconf 2.69-1
    autoconf2.13 2.13-2
    autofs 5.0.6-3
    autogen 5.15-1
    automake 1.12.2-1
    automoc4 0.9.88-3
    autopano-sift-c 2.5.1-3
    avahi 0.6.31-3
    avidemux-cli 2.5.6-3
    avidemux-gtk 2.5.6-3
    avidemux-qt 2.5.6-3
    avifile 0.7.45-8
    babl 0.1.10-1
    banshee 2.4.1-1
    baobab 3.4.1-2
    bash 4.2.037-1
    bash-completion 2.0-2
    bc 1.06-8
    beep 1.3-2
    bin32-flashplayer-standalone 11.2.202.236-2
    bin32-google-earth 6.0.3.2197-1
    binutils-multilib 2.22-8
    bison 2.6.2-1
    blas 3.4.1-1
    bleachbit 0.9.3-1
    blender 4:2.64-2
    bluefish 2.2.3-1
    blueman 1.23-4
    bluez 4.101-1
    bogofilter 1.2.2-4
    boo 0.9.4.9-2
    boost 1.50.0-2
    boost-libs 1.50.0-2
    brasero 3.4.1-1
    brltty 4.3-5
    bsdiff 4.3-7
    bullet 2.80-1
    bullet-docs 2.80-1
    bzip2 1.0.6-4
    bzr 2.5.1-1
    c-ares 1.9.0-1
    ca-certificates 20120623-1
    ca-certificates-java 20120608-1
    cabal-install 0.14.0-2
    cabextract 1.4-2
    cairo 1.12.2-2
    cairo-perl 1.082-2
    cairomm 1.10.0-2
    calibre 0.8.64-1
    cantarell-fonts 0.0.8-1
    caribou 0.4.2-1
    catdoc 0.94.3-1
    ccid 1.4.7-1
    cdparanoia 10.2-4
    cdrdao 1.2.3-6
    cdrkit 1.1.11-2
    cfitsio 3.310-1
    cheese 3.4.2-1
    cherrytree 0.26-1
    chmlib 0.40-3
    chromium 21.0.1180.75-1
    chromium-pepper-flash 11.3.31.307-1
    chrpath 0.13-3
    cifs-utils 5.6-2
    cksfv 1.3.14-2
    clamav 0.97.5-2
    clang 3.1-4
    clang-analyzer 3.1-4
    claws-mail 3.8.1-1
    claws-mail-extra-plugins 3.8.1-1
    cloog 0.17.0-2
    clutter 1.10.6-1
    clutter-gst 1.6.0-1
    clutter-gtk 1.2.0-1
    cmake 2.8.9-1
    cnetworkmanager 0.21.1-3
    codeblocks 10.05-2
    cogl 1.10.4-1
    colord 0.1.21-2
    compositeproto 0.4.2-2
    consolekit 0.4.6-4
    coolreader 3.0.56-1
    coreutils 8.17-3
    cpio 2.11-3
    cpufrequtils 008-2
    crack-attack 1.1.14-6
    crack-attack-sounds 1.1.14-4
    cracklib 2.8.18-2
    crafty 23.4-2
    crayonphysicsdeluxe 55_3-3
    crda 1.1.2-3
    cronie 1.4.8-3
    cross-arm-elf-binutils 2.21-2
    cross-arm-elf-gcc-base 4.6.0-1
    cryptsetup 1.5.0-1
    csfml 1.99.git20120504-1
    ctags 5.8-3
    cups 1.6.1-4
    cups-filters 1.0.20-1
    cups-pdf 2.6.1-1
    cups-pk-helper 0.2.2-1
    curl 7.27.0-1
    curlftpfs 0.9.2-4
    cvs 1.11.23-8
    d-feet 0.1.14-2
    damageproto 1.2.1-2
    dash 0.5.7-2
    dasher 4.10.1-3
    db 5.3.21-1
    dbus 1.6.4-1
    dbus-core 1.6.4-1
    dbus-glib 0.100-1
    dbus-sharp 0.7.0-4
    dbus-sharp-glib 0.5.0-4
    dconf 0.12.1-2
    deb2targz 0.1-3
    deja-dup 22.1-1
    desktop-file-utils 0.20-1
    devede 3.22.0-2
    devhelp 3.4.1-1
    device-mapper 2.02.96-3
    dfhack-git 20120613-1
    dhclient 4.2.4.1-1
    dhcp 4.2.4.1-1
    dhcpcd 5.5.6-1
    dia 0.97.2-3
    dialog 1.1_20120706-1
    diffstat 1.55-1
    diffutils 3.2-1
    dirmngr 1.1.0-4
    django 1.4.1-1
    django-classy-tags 0.3.4.1-1
    django-cms 2.2-1
    django-mptt 0.5.1-1
    django-sekizai 0.5-1
    djvulibre 3.5.24-3
    dkms 2.2.0.3-11
    dmxproto 2.3.1-2
    dnsmasq 2.62-1
    dnssec-anchors 20120422-1
    dnsutils 9.9.1.P2-1
    docbook-xml 4.5-5
    docbook-xsl 1.77.1-2
    dosbox 0.74-3
    dosfstools 3.0.12-1
    dotconf 1.3-3
    doxygen 1.8.1.2-1
    dri2proto 2.8-1
    dropbox-experimental 1.5.10-1
    duplicity 0.6.19-1
    dvd+rw-tools 7.1-4
    dvdauthor 0.7.0-4
    dvgrab 3.5-4
    dwarffortress 0.34.11-1
    dwarffortress-ironhand 0.73-4
    dwarftherapist-hg 571-1
    e2fsprogs 1.42.4-1
    easytag 2.1.7-2
    eclipse 4.2-1
    eclipse-cdt 8.1.0-2
    eclipse-ecj 3.7.1-1
    eclipse-mylyn 3.8.1-1
    eclipse-pydev 2.6.0-1
    eclipse-qt-eclipse-integration-bin 1.6.1-2
    eclipse-subclipse 1.8.14-1
    eigen2 2.0.17-1
    eject 2.1.5-7
    ekiga 3.3.2-6
    elfutils 0.154-1
    emacs 24.1-2
    empathy 3.4.2.3-1
    enblend-enfuse 4.0-6
    enca 1.13-2
    enchant 1.6.0-4
    engine_pkcs11 0.1.8-2
    enscript 1.6.5.2-2
    eog 3.4.3-1
    eog-plugins 3.4.1-1
    epiphany 3.4.3-1
    epydoc 3.0.1-2
    eric 5.2.4-1
    eric-plugins 5.1.0-1
    eric4 4.5.5-1
    eric4-plugins 4.4.4a-1
    eventlog 0.2.12-3
    evince 3.4.0-1
    evolution 3.4.3-1
    evolution-data-server 3.4.3-1
    evolution-exchange 3.4.3-1
    exempi 2.2.0-1
    exiv2 0.23-1
    exo 0.8.0-1
    expac 1-1
    expat 2.1.0-1
    extundelete 0.2.0-2
    faac 1.28-4
    faad2 2.7-3
    fakeroot 1.18.4-1
    farstream 0.1.2-1
    fb-client 1.0.4-1
    fbreader 0.99.1-1
    fcrackzip 1.0-3
    festival 2.1-3
    ffmpeg 1:0.11.1-1
    ffmpeg-compat 20120509-1
    fftw 3.3.2-1
    file 5.11-1
    file-roller 3.4.2-1
    filesystem 2012.7-1
    filezilla 3.5.3-1
    findutils 4.4.2-4
    firefox 14.0.1-1
    firefox-i18n 14.0.1-1
    firefox-i18n-de 14.0.1-1
    firefox-nightly 17.0a1-1
    fixesproto 5.0-2
    flac 1.2.1-3
    flasher 3.5_2.5.2.2-2
    flashplugin 11.2.202.236-1
    flex 2.5.37-1
    fltk 1.3.0-3
    fltk-docs 1.3.0-3
    fltk-games 1.3.0-3
    fluidsynth 1.1.5-2
    folks 0.6.9-2
    font-bh-ttf 1.0.1-2
    font-bitstream-speedo 1.0.1-2
    font-misc-ethiopic 1.0.1-2
    font-misc-meltho 1.0.1-2
    fontconfig 2.8.0-2
    fontsproto 2.1.2-1
    foomatic-db 1:4.0.17_20120712-1
    foomatic-db-engine 1:4.0.17_20120712-1
    foomatic-db-nonfree 1:4.0.17_20120712-1
    foomatic-filters 1:4.0.17_20120712-1
    fortune-mod 1.99.1-5
    fortune-mod-chucknorris 1-3
    fortune-mod-discworld 0-2
    fortune-mod-ferengi_rules_of_acquisition 20080318-1
    fortune-mod-futurama 0.2-4
    fortune-mod-himym 0.3-3
    fortune-mod-hitchhiker 20050611-1
    fortune-mod-house 20100911-1
    fortune-mod-matrix 20091124-1
    fortune-mod-misfits 0.1-2
    fortune-mod-montypython 20091124-1
    fortune-mod-simpsons-chalkboard 0-2
    fortune-mod-southpark 20100911-1
    fortune-mod-tbbt 0.5-1
    fortune-mod-the-godfather 3.0-2
    fox 1.6.46-1
    freeglut 2.8.0-1
    freeimage 3.15.3-1
    freemind 0.9.0-2
    freenet 0.7.5-1
    freetype2 2.4.10-1
    frei0r-plugins 1.3-3
    fretsonfire 1.3.110-7
    fribidi 0.19.2-2
    ftgl 2.1.3rc5-3
    ftjam 2.5.3rc2-3
    fuse 2.9.1-1
    fuseiso 20070708-4
    fwbuilder 5.1.0.3599-2
    gadmin-samba 0.3.3-1
    gambas3-devel 3.2.1-4
    gambas3-examples 3.2.1-4
    gambas3-gb-cairo 3.2.1-4
    gambas3-gb-chart 3.2.1-4
    gambas3-gb-compress 3.2.1-4
    gambas3-gb-crypt 3.2.1-4
    gambas3-gb-db 3.2.1-4
    gambas3-gb-db-form 3.2.1-4
    gambas3-gb-db-mysql 3.2.1-4
    gambas3-gb-db-odbc 3.2.1-4
    gambas3-gb-db-postgresql 3.2.1-4
    gambas3-gb-db-sqlite2 3.2.1-4
    gambas3-gb-db-sqlite3 3.2.1-4
    gambas3-gb-dbus 3.2.1-4
    gambas3-gb-desktop 3.2.1-4
    gambas3-gb-eval-highlight 3.2.1-4
    gambas3-gb-form 3.2.1-4
    gambas3-gb-form-dialog 3.2.1-4
    gambas3-gb-form-mdi 3.2.1-4
    gambas3-gb-form-stock 3.2.1-4
    gambas3-gb-gsl 3.2.1-4
    gambas3-gb-gtk 3.2.1-4
    gambas3-gb-image 3.2.1-4
    gambas3-gb-image-effect 3.2.1-4
    gambas3-gb-image-imlib 3.2.1-4
    gambas3-gb-image-io 3.2.1-4
    gambas3-gb-net 3.2.1-4
    gambas3-gb-net-curl 3.2.1-4
    gambas3-gb-net-smtp 3.2.1-4
    gambas3-gb-opengl 3.2.1-4
    gambas3-gb-opengl-glsl 3.2.1-4
    gambas3-gb-opengl-glu 3.2.1-4
    gambas3-gb-option 3.2.1-4
    gambas3-gb-pcre 3.2.1-4
    gambas3-gb-pdf 3.2.1-4
    gambas3-gb-qt4 3.2.1-4
    gambas3-gb-qt4-ext 3.2.1-4
    gambas3-gb-qt4-opengl 3.2.1-4
    gambas3-gb-qt4-webkit 3.2.1-4
    gambas3-gb-report 3.2.1-4
    gambas3-gb-sdl 3.2.1-4
    gambas3-gb-sdl-sound 3.2.1-4
    gambas3-gb-settings 3.2.1-4
    gambas3-gb-signal 3.2.1-4
    gambas3-gb-v4l 3.2.1-4
    gambas3-gb-vb 3.2.1-4
    gambas3-gb-web 3.2.1-4
    gambas3-gb-xml 3.2.1-4
    gambas3-gb-xml-rpc 3.2.1-4
    gambas3-gb-xml-xslt 3.2.1-4
    gambas3-ide 3.2.1-4
    gambas3-runtime 3.2.1-4
    gambas3-script 3.2.1-4
    gamin 0.1.10-6
    garcon 0.2.0-1
    gavl 1.2.0-2
    gawk 4.0.1-1
    gc 7.2-1
    gcalctool 6.4.2.1-1
    gcc-fortran 4.7.1-5
    gcc-libs-multilib 4.7.1-5
    gcc-multilib 4.7.1-5
    gcolor2 0.4-6
    gconf 3.2.5-2
    gconf-editor 3.0.0-2
    gconf-sharp 2.24.2-2
    gconf-sharp-peditors 2.24.2-2
    gconfmm 2.28.3-1
    gcr 3.4.1-1
    gd 2.0.36RC1-5
    gdal 1.9.0-1
    gdata-sharp 1.7.0.1-2
    gdb 7.4.1-1
    gdbm 1.10-1
    gdk-pixbuf2 2.26.1-1
    gdl 3.4.2-1
    gdm 3.4.1-2
    gedit 3.4.2-1
    gedit-plugins 3.4.0-2
    geeqie 1.0-7
    gegl 0.2.0-2
    generatorrunner 0.6.16-1
    geoclue 0.12.0-5
    geoip 1.4.8-2
    geoip-database 20120706-1
    geos 3.3.4-1
    gettext 0.18.1.1-4
    gettext-mono 0.18.1.1-1
    ghc 7.4.2-1
    ghex 3.4.1-1
    ghostscript 9.06-1
    giflib 4.1.6-5
    gimp 2.8.0-2
    gimp-fourier 0.4.1-1
    gimp-gap 2.6.0-3
    gimp-paint-studio 1.5_final-1
    gimp-plugin-dcamnoise2 0.64-6
    gimp-plugin-dds 2.0.9-1
    gimp-plugin-pandora 0.9.3-2
    gimp-plugin-texturize 2.1-3
    gimp-resynth 1:20120508-1
    gimpfx-foundry 2.6_1-2
    git 1.7.11.4-1
    git-term 1.2.6-2
    gjs 1.32.0-2
    gkeyfile-sharp 0.1-2
    gksu 2.0.2-4
    glade 3.12.1-1
    glew 1.8.0-1
    glhack 1.2-6
    glib-networking 2.32.3-1
    glib-perl 1.260-1
    glib2 2.32.4-1
    glibc 2.16.0-2
    glibmm 2.32.1-1
    glpk 4.47-1
    glproto 1.4.16-1
    gmime 2.6.10-1
    gmp 5.0.5-1
    gnochm 0.9.11-11
    gnome-activity-journal-bzr 1251-1
    gnome-applets 3.4.1-1
    gnome-backgrounds 3.4.2-1
    gnome-bluetooth 3.4.2-1
    gnome-color-manager 3.4.2-2
    gnome-common 3.4.0.1-2
    gnome-contacts 3.4.1-1
    gnome-control-center 3.4.2-1
    gnome-cups-manager 0.33-6
    gnome-desktop 1:3.4.2-1
    gnome-desktop2 2.32.1-2
    gnome-dictionary 3.4.0-1
    gnome-disk-utility 3.4.1-1
    gnome-doc-utils 0.20.10-1
    gnome-documents 0.4.2-1
    gnome-font-viewer 3.4.0-1
    gnome-games 3.4.2-1
    gnome-games-extra-data 3.2.0-1
    gnome-icon-theme 3.4.0-1
    gnome-icon-theme-extras 3.4.0-1
    gnome-icon-theme-symbolic 3.4.0-1
    gnome-inform7 6G60-3
    gnome-js-common 0.1.2-2
    gnome-keyring 3.4.1-3
    gnome-media 3.4.0-1
    gnome-menus 3.4.2-1
    gnome-mime-data 2.18.0-6
    gnome-nettool 3.1.1-1
    gnome-online-accounts 3.4.2-1
    gnome-packagekit 3.4.2-1
    gnome-panel 3.4.2.1-1
    gnome-power-manager 3.4.0-1
    gnome-print-sharp 2.26.0-7
    gnome-python 2.28.1-8
    gnome-python-extras 2.25.3-12
    gnome-screensaver 3.4.4-1
    gnome-screenshot 3.4.1-1
    gnome-search-tool 3.4.0-1
    gnome-session 3.4.2-3
    gnome-settings-daemon 3.4.2-1
    gnome-settings-daemon-updates 3.4.2-1
    gnome-sharp 2.24.2-2
    gnome-shell 3.4.2-1
    gnome-shell-extension-user-theme 3.2.3-1
    gnome-speech 0.4.25-2
    gnome-system-log 3.4.1-1
    gnome-system-monitor 3.4.1-1
    gnome-terminal 3.4.1.1-1
    gnome-themes-extras 2.22.0-3
    gnome-themes-standard 3.4.2-1
    gnome-tweak-tool 3.4.0.1-1
    gnome-user-docs 3.4.2-1
    gnome-utils 3.4.0-1
    gnome-vfs 2.24.4-6
    gnome-vfs-sharp 2.24.2-2
    gnome-video-effects 0.4.0-1
    gnonlin 0.10.16-2
    gnuchess 6.0.2-1
    gnunet 0.9.3-1
    gnunet-gtk 0.9.3-1
    gnupg 2.0.19-2
    gnuplot 4.6.0-3
    gnutls 3.0.22-1
    gobject-introspection 1.32.1-2
    goocanvas 2.0.1-2
    goocanvas1 1.0.0-1
    gourmet 0.15.9-2
    gparted 0.13.1-1
    gperf 3.0.4-4
    gpgme 1.3.1-4
    gphoto2 2.4.14-1
    gpm 1.20.6-10
    gprolog 1.4.0-2
    gpsim 0.26.1-2
    gputils 0.14.1-1
    grantlee 0.2.0-1
    graphicsmagick 1.3.16-1
    graphite 1:1.0.3-1
    graphviz 2.28.0-10
    grep 2.13-2
    groff 1.21-2
    grsync 1.2.1-1
    grub-bios 2.00-1
    grub-common 2.00-1
    gsettings-desktop-schemas 3.4.2-1
    gsfonts 1.0.7pre44-3
    gsl 1.15-2
    gsm 1.0.13-7
    gsmartcontrol 0.8.7-1
    gssdp 0.12.1-1
    gstreamer0.10 0.10.36-1
    gstreamer0.10-bad 0.10.23-2
    gstreamer0.10-bad-plugins 0.10.23-2
    gstreamer0.10-base 0.10.36-1
    gstreamer0.10-base-plugins 0.10.36-1
    gstreamer0.10-ffmpeg 0.10.13-1
    gstreamer0.10-good 0.10.31-1
    gstreamer0.10-good-plugins 0.10.31-1
    gstreamer0.10-python 0.10.22-1
    gstreamer0.10-ugly 0.10.19-2
    gstreamer0.10-ugly-plugins 0.10.19-2
    gthumb 3.0.1-2
    gtk-doc 1.18-1
    gtk-engines 2.21.0-1
    gtk-recordmydesktop 0.3.8-6
    gtk-sharp-2 2.12.11-1
    gtk-update-icon-cache 2.24.11-2
    gtk-vnc 0.5.0-1
    gtk2 2.24.11-2
    gtk2+extra 2.1.2-2
    gtk2-perl 1.244-1
    gtk2-xfce-engine 3.0.0-1
    gtk3 3.4.4-1
    gtkglext 1.2.0-7
    gtkglextmm 1.2.0-8
    gtkhtml 3.32.2-3
    gtkhtml-sharp 2.26.0-8
    gtkhtml4 4.4.3-1
    gtkmm 2.24.2-2
    gtkmm3 3.4.0-1
    gtksourceview2 2.10.5-2
    gtksourceview2-sharp 2.26.0-8
    gtksourceview3 3.4.2-1
    gtkspell 2.0.16-2
    gts 0.7.6-2
    gucharmap 3.4.1.1-1
    gudev-sharp 0.1-2
    guile 1.8.8-2
    gupnp 0.18.2-1
    gupnp-av 0.10.2-1
    gupnp-dlna 0.6.6-1
    gutenprint 5.2.9-1
    guvcview 1.6.0-2
    gvfs 1.12.3-3
    gvfs-gphoto2 1.12.3-3
    gvfs-obexftp 1.12.3-3
    gvfs-smb 1.12.3-3
    gzip 1.5-1
    hammerfight 1:1.004-1
    handbrake 0.9.8-1
    handbrake-cli 0.9.8-1
    happy 1.18.9-5
    haxe 2.10-1
    hdf5 1.8.8-1
    hdparm 9.39-1
    heirloom-mailx 12.5-3
    help2man 1.40.11-1
    hibiscus 2.2.1-2
    hicolor-icon-theme 0.12-2
    hot-babe 0.2.2-11
    hplip 3.12.6-3
    hspell 1.1-2
    hsqldb-java 1:1.8.0.10-2
    httrack 3.46.1-1
    hugin 2011.4.0-5
    hunspell 1.3.2-1
    hunspell-de 20120607-1
    hunspell-en 7.1-2
    hwids 20120730-1
    hwloc 1.4.2-1
    hydrogen 0.9.5-2
    hyphen 2.8.5-1
    i2p 0.9.1-1
    iana-etc 2.30-3
    iat 0.1.7-4
    icedtea-web-java7 1.2.1-2
    icon-naming-utils 0.8.90-2
    icoutils 0.29.1-2
    icu 49.1.2-2
    id3lib 3.8.3-12
    idnkit 1.0-2
    ilmbase 1.0.2-1
    imagemagick 6.7.8.9-1
    imlib2 1.4.5-2
    indent 2.2.11-2
    inetutils 1.9.1-2
    inform7 6G60-1
    inkscape 0.48.3.1-4
    inputproto 2.2-1
    intel-tbb 4.0_20120613-1
    intltool 0.50.2-1
    iproute2 3.4.0-2
    iptables 1.4.14-3
    iputils 20101006-4
    ipython 0.13-1
    ipython2 0.13-1
    isl 0.10-1
    iso-codes 3.38-1
    itstool 1.1.2-1
    iw 3.4-1
    jack 0.121.3-6
    jade 1.2.1-8
    jameica 2.2-3
    jamestown 1.0.1-1
    jasper 1.900.1-7
    java-rhino 1.7R3-3
    jdk7-openjdk 7.u5_2.2.1-1
    jfsutils 1.1.15-3
    john 1.7.9-6
    jre7-openjdk 7.u5_2.2.1-1
    jre7-openjdk-headless 7.u5_2.2.1-1
    js 1.8.5-3
    json-c 0.9-1
    json-glib 0.14.2-1
    jython 2.5.2-2
    kactivities 4.9.0-1
    kbd 1.15.3-3
    kbproto 1.0.6-1
    kdebase-runtime 4.9.0-3
    kdelibs 4.9.0-4
    kdelibs3 3.5.10-13
    kdenlive 0.9.2-2
    kdepimlibs 4.9.0-1
    keyutils 1.5.5-3
    khrplatform-devel 8.0.4-2
    kismet 2011_03_R2-4
    kmod 9-2
    komodo-ide 7.0.2_70257-1
    komodoedit 7.1.0_10496-1
    krb5 1.10.3-1
    ktechlab 0.3.7-3
    ladspa 1.13-3
    lame 3.99.5-1
    lapack 3.4.1-1
    laptop-mode-tools 1.61-2
    latexila 2.4.0-6
    lcms 1.19-2
    lcms2 2.3-2
    ld-lsb 3-4
    ldns 1.6.13-1
    leptonica 1.69-3
    less 444-3
    lesstif 0.95.2-4
    lftp 4.3.8-1
    lib32-acl 2.2.51-2
    lib32-allegro 5.0.7-1
    lib32-alsa-lib 1.0.25-1
    lib32-alsa-plugins 1.0.25-1
    lib32-atk 2.4.0-1
    lib32-attr 2.4.46-2
    lib32-bzip2 1.0.6-1
    lib32-cairo 1.12.2-1
    lib32-curl 7.26.0-1
    lib32-dbus-core 1.6.4-1
    lib32-e2fsprogs 1.42.4-1
    lib32-expat 2.1.0-1
    lib32-flac 1.2.1-8
    lib32-fontconfig 2.8.0-4
    lib32-freetype2 2.4.10-1
    lib32-gcc-libs 4.7.1-5
    lib32-gdk-pixbuf2 2.26.1-2
    lib32-gettext 0.18.1.1-2
    lib32-giflib 4.1.6-6
    lib32-glew 1.8.0-1
    lib32-glew1.5 1.5.8-1
    lib32-glib2 2.32.4-1
    lib32-glibc 2.16.0-2
    lib32-gtk2 2.24.11-1
    lib32-jack 0.121.3-1
    lib32-json-c 0.9-2
    lib32-keyutils 1.5.5-1
    lib32-krb5 1.10.2-1
    lib32-lcms 1.19-4
    lib32-libasyncns 0.8-6
    lib32-libcanberra 0.28-2
    lib32-libcanberra-pulse 0.28-2
    lib32-libcap 2.22-1
    lib32-libcups 1.6.1-1
    lib32-libdrm 2.4.37-1
    lib32-libdrm-nouveau1 2.4.33-1
    lib32-libffi 3.0.11-1
    lib32-libgcrypt 1.5.0-1
    lib32-libgl 8.0.4-4
    lib32-libglade 2.6.4-5
    lib32-libglapi 8.0.4-4
    lib32-libgpg-error 1.10-1
    lib32-libice 1.0.8-1
    lib32-libjpeg-turbo 1.2.1-1
    lib32-libjpeg6 6b1-1
    lib32-libldap 2.4.32-1
    lib32-libltdl 2.4.2-6
    lib32-libmikmod 3.1.12-6
    lib32-libmng 1.0.10-6
    lib32-libogg 1.3.0-1
    lib32-libpciaccess 0.13.1-1
    lib32-libpng 1.5.12-1
    lib32-libpng12 1.2.50-1
    lib32-libpulse 2.1-1
    lib32-libsm 1.2.1-1
    lib32-libsndfile 1.0.25-2
    lib32-libssh2 1.4.2-1
    lib32-libtiff 4.0.2-1
    lib32-libusb 1.0.9-1
    lib32-libusb-compat 0.1.4-2
    lib32-libvorbis 1.3.3-1
    lib32-libx11 1.5.0-1
    lib32-libxau 1.0.7-1
    lib32-libxcb 1.8.1-2
    lib32-libxcomposite 0.4.3-3
    lib32-libxcursor 1.1.13-1
    lib32-libxdamage 1.1.3-4
    lib32-libxdmcp 1.1.1-1
    lib32-libxext 1.3.1-1
    lib32-libxfixes 5.0-1
    lib32-libxft 2.3.1-1
    lib32-libxi 1.6.1-1
    lib32-libxinerama 1.1.2-1
    lib32-libxml2 2.7.8-2
    lib32-libxmu 1.1.1-1
    lib32-libxpm 3.5.9-2
    lib32-libxrandr 1.3.2-2
    lib32-libxrender 0.9.7-1
    lib32-libxss 1.2.2-1
    lib32-libxt 1.1.3-1
    lib32-libxtst 1.2.1-1
    lib32-libxv 1.0.7-1
    lib32-libxxf86dga 1.1.3-1
    lib32-libxxf86vm 1.1.2-1
    lib32-mesa 8.0.4-4
    lib32-mpg123 1.14.4-1
    lib32-ncurses 5.9-1
    lib32-nouveau-dri 8.0.4-1
    lib32-nspr 4.9.2-1
    lib32-nss 3.13.5-1
    lib32-openal 1.14-1
    lib32-openssl 1.0.1.c-1
    lib32-pango 1.30.1-1
    lib32-pcre 8.31-1
    lib32-physfs 2.0.2-2
    lib32-pixman 0.26.2-1
    lib32-qt 4.8.2-2
    lib32-readline 6.2.004-1
    lib32-sdl 1.2.15-2
    lib32-sdl_image 1.2.12-2
    lib32-sdl_mixer 1.2.11-3
    lib32-sdl_ttf 2.0.11-1
    lib32-smpeg 0.4.4-9
    lib32-sqlite3 3.7.13-1
    lib32-tdb 1.2.9-1
    lib32-util-linux 2.21.2-1
    lib32-v4l-utils 0.8.8-1
    lib32-xcb-util 0.3.9-1
    lib32-zlib 1.2.7-1
    libanjuta 3.4.4-1
    libao 1.1.0-2
    libarchive 3.0.4-1
    libart-lgpl 2.3.21-2
    libass 0.10.0-3
    libassuan 2.0.3-1
    libasyncns 0.8-4
    libatasmart 0.18-2
    libavc1394 0.5.4-1
    libbluray 0.2.2-1
    libbonobo 2.32.1-2
    libbonoboui 2.24.5-2
    libcaca 0.99.beta18-1
    libcanberra 0.28-5
    libcanberra-gstreamer 0.28-5
    libcanberra-pulse 0.28-5
    libcap 2.22-3
    libcap-ng 0.6.6-1
    libcdaudio 0.99.12-6
    libcddb 1.3.2-3
    libcdio 0.83-1
    libchamplain 0.12.3-1
    libcroco 0.6.5-1
    libcups 1.6.1-4
    libdaemon 0.14-2
    libdatrie 0.2.5-1
    libdbusmenu-qt 0.9.2-1
    libdc1394 2.1.3-2
    libdca 0.0.5-3
    libdiscid 0.2.2-2
    libdmtx 0.7.4-3
    libdmx 1.1.2-1
    libdrm 2.4.37-1
    libdrm-nouveau1 2.4.33-1
    libdv 1.0.0-4
    libdvbpsi 0.2.2-1
    libdvdcss 1.2.12-1
    libdvdnav 4.2.0-2
    libdvdread 4.2.0-1
    libebml 1.2.2-2
    libedit 20120311_3.0-1
    libegl 8.0.4-2
    libetpan 1.0-4
    libevent 2.0.19-1
    libexif 0.6.21-1
    libextractor 0.6.3-6
    libffi 3.0.11-1
    libfontenc 1.1.1-1
    libftdi 0.20-1
    libgcrypt 1.5.0-3
    libgda 5.0.3-1
    libgdata 0.12.0-1
    libgdiplus 2.10-2
    libgee 0.6.5-1
    libgeotiff 1.3.0-2
    libgexiv2 0.4.1-3
    libgksu 2.0.12-5
    libgl 8.0.4-2
    libglade 2.6.4-3
    libglademm 2.6.7-2
    libglapi 8.0.4-2
    libgme 0.6.0-2
    libgnome 2.32.1-3
    libgnome-data 2.32.1-3
    libgnome-desktop-sharp 2.26.0-8
    libgnome-keyring 3.4.1-1
    libgnome-media-profiles 3.0.0-3
    libgnome-sharp 2.24.2-2
    libgnomecanvas 2.30.3-2
    libgnomecups 0.2.3-11
    libgnomekbd 3.4.0.2-1
    libgnomeprint 2.18.8-5
    libgnomeprintui 2.18.6-4
    libgnomeui 2.24.5-1
    libgpg-error 1.10-2
    libgphoto2 2.4.14-1
    libgpod 0.8.2-6
    libgsf 1.14.23-1
    libgssglue 0.3-1
    libgtkhtml 2.11.1-4
    libgtop 2.28.4-1
    libgusb 0.1.3-1
    libgweather 3.4.1-1
    libgxps 0.2.2-1
    libical 0.48-1
    libice 1.0.8-1
    libid3tag 0.15.1b-7
    libidl2 0.8.14-2
    libidn 1.25-1
    libiec61883 1.2.0-3
    libieee1284 0.2.11-4
    libimobiledevice 1.1.4-2
    libiodbc 3.52.8-1
    libircclient 1.6-1
    libirman 0.4.5-3
    libjpeg-turbo 1.2.1-1
    libjpeg6-turbo 1.2.1-1
    libkate 0.4.1-3
    libksba 1.2.0-2
    libldap 2.4.32-1
    liblinebreak 2.1-1
    liblouis 2.3.0-1
    liblqr 0.4.1-3
    liblrdf 0.5.0-1
    libltdl 2.4.2-6
    libmad 0.15.1b-6
    libmatroska 1.3.0-2
    libmicrohttpd 0.9.21-1
    libmikmod 3.1.12-4
    libmirage 1.5.0-1
    libmms 0.6.2-1
    libmng 1.0.10-4
    libmodplug 0.8.8.4-1
    libmp4v2 2.0.0-2
    libmpc 0.9-2
    libmpcdec 1.2.6-3
    libmpeg2 0.5.1-3
    libmtp 1.1.3-1
    libmusicbrainz3 3.0.3-2
    libmusicbrainz4 4.0.3-1
    libmysqlclient 5.5.27-1
    libmythes 1:1.2.3-1
    libnice 0.1.2-1
    libnl 3.2.11-1
    libnl1 1.1-1
    libnotify 0.7.5-1
    liboauth 0.9.6-1
    libofa 0.9.3-4
    libogg 1.3.0-1
    libotf 0.9.12-2
    libotr 3.2.0-3
    libp11 0.2.8-1
    libpano13 2.9.18-2
    libpcap 1.3.0-1
    libpciaccess 0.13.1-1
    libpeas 1.4.0-2
    libpipeline 1.2.1-1
    libplist 1.8-2
    libpng 1.5.12-1
    libpng12 1.2.50-1
    libpng14 1.4.11-1
    libproxy 0.4.7-2
    libpst 0.6.54-2
    libpulse 2.1-1
    libpurple 2.10.6-1
    libquvi 0.4.1-1
    libquvi-scripts 0.4.6-1
    libqzeitgeist 0.8.0-2
    libraw 0.14.6-1
    libraw1394 2.0.7-2
    libreoffice-base 3.5.5-1
    libreoffice-calc 3.5.5-1
    libreoffice-common 3.5.5-1
    libreoffice-de 3.5.5-1
    libreoffice-draw 3.5.5-1
    libreoffice-extension-ct2n 3.4.5-2
    libreoffice-extension-diagram 3.4.5-2
    libreoffice-extension-google-docs 3.4.5-2
    libreoffice-extension-hunart 3.4.5-2
    libreoffice-extension-nlpsolver 3.5.5-1
    libreoffice-extension-numbertext 3.4.5-2
    libreoffice-extension-oooblogger 3.4.5-2
    libreoffice-extension-pdfimport 3.5.5-1
    libreoffice-extension-presentation-minimizer 3.5.5-1
    libreoffice-extension-presenter-screen 3.5.5-1
    libreoffice-extension-report-builder 3.5.5-1
    libreoffice-extension-scripting-beanshell 3.4.5-2
    libreoffice-extension-scripting-javascript 3.4.5-2
    libreoffice-extension-scripting-python 3.5.5-1
    libreoffice-extension-typo 3.4.5-2
    libreoffice-extension-validator 3.4.5-2
    libreoffice-extension-watch-window 3.4.5-2
    libreoffice-extension-wiki-publisher 3.5.5-1
    libreoffice-gnome 3.5.5-1
    libreoffice-impress 3.5.5-1
    libreoffice-math 3.5.5-1
    libreoffice-writer 3.5.5-1
    librpcsecgss 0.19-7
    librsvg 2.36.1-1
    librsync 0.9.7-6
    libsamplerate 0.1.8-1
    libsasl 2.1.23-9
    libshiboken 1.1.1-1
    libshout 1:2.3.0-1
    libsidplay 1.36.59-5
    libsigc++ 2.2.10-2
    libsigsegv 2.10-1
    libsm 1.2.1-1
    libsndfile 1.0.25-2
    libsocialweb 0.25.20-1
    libsoup 2.38.1-1
    libsoup-gnome 2.38.1-1
    libspectre 0.2.7-1
    libssh 0.5.2-1
    libssh2 1.4.2-1
    libstdc++5 3.3.6-4
    libsystemd 188-2
    libtasn1 2.13-1
    libthai 0.1.18-1
    libtheora 1.1.1-2
    libtiff 4.0.2-1
    libtiff4 3.9.5-4
    libtiger 0.3.4-3
    libtirpc 0.2.2-2
    libtool 2.4.2-6
    libtorrent-rasterbar 1:0.16.2-1
    libtracker-sparql 0.14.2-1
    libunique 1.1.6-5
    libunique3 3.0.2-2
    libunistring 0.9.3-5
    libunrar 4.2.4-1
    libupnp 1.6.17-1
    libusb-compat 0.1.4-2
    libusbx 1.0.12-2
    libva 1.1.0-1
    libvdpau 0.4.1-2
    libvisual 0.4.0-4
    libvncserver 0.9.9-1
    libvorbis 1.3.3-1
    libvpx 1.1.0-1
    libwacom 0.6-1
    libwbclient 3.6.7-1
    libwebkit 1.8.2-1
    libwebkit3 1.8.2-1
    libwebp 0.1.99-1
    libwmf 0.2.8.4-9
    libwnck 2.30.7-1
    libwnck3 3.4.2-1
    libwpd 0.9.4-1
    libwpg 0.2.1-1
    libwps 0.2.2-2
    libx11 1.5.0-1
    libxau 1.0.7-1
    libxaw 1.0.11-1
    libxcb 1.8.1-1
    libxcomposite 0.4.3-2
    libxcursor 1.1.13-1
    libxdamage 1.1.3-2
    libxdmcp 1.1.1-1
    libxext 1.3.1-1
    libxfce4ui 4.10.0-1
    libxfce4util 4.10.0-1
    libxfixes 5.0-2
    libxfont 1.4.5-1
    libxft 2.3.1-1
    libxi 1.6.1-1
    libxinerama 1.1.2-1
    libxkbfile 1.0.8-1
    libxklavier 5.2.1-2
    libxmi 1.2-5
    libxml2 2.8.0-1
    libxmu 1.1.1-1
    libxp 1.0.1-3
    libxpm 3.5.10-1
    libxrandr 1.4.0-1
    libxrender 0.9.7-1
    libxres 1.0.6-1
    libxslt 1.1.26-3
    libxss 1.2.2-1
    libxt 1.1.3-1
    libxtst 1.2.1-1
    libxv 1.0.7-1
    libxvmc 1.0.7-1
    libxxf86dga 1.1.3-1
    libxxf86vm 1.1.2-1
    libyaml 0.1.4-2
    libytnef 1.5-3
    libzeitgeist 0.3.18-2
    licenses 2.9-1
    liferea 1.8.7-1
    links 2.7-1
    linux 3.4.7-1
    linux-api-headers 3.4.6-1
    linux-ck-corex 3.4.8-1
    linux-ck-corex-headers 3.4.8-1
    linux-docs 3.4.7-1
    linux-firmware 20120625-1
    linux-headers 3.4.7-1
    linux-mainline 3.6rc1-1
    linux-manpages 3.1-1
    linux-pf-core2 3.5.1-1
    lirc-utils 1:0.9.0-22
    llvm 3.1-4
    lmms 0.4.13-1
    logrotate 3.8.2-1
    lpsolve 5.5.2.0-2
    lsof 4.86-1
    lua 5.1.5-2
    lvm2 2.02.96-3
    lyx 2.0.4-1
    lzo2 2.06-1
    m4 1.4.16-2
    make 3.82-4
    makedepend 1.0.3-2
    makehuman 1.0alpha6-1
    man-db 2.6.2-1
    man-pages 3.41-1
    mash 0.2.0-1
    maxima 5.27.0-2
    mc 4.8.4-1
    mcelog 1.0pre3-3
    mcpp 2.7.2-4
    mdadm 3.2.5-2
    media-player-info 17-1
    megaglest 3.6.0.3-3
    megaglest-data 3.6.0.3-1
    meld 1.6.0-1
    mencoder 35014-1
    mercurial 2.3-1
    mesa 8.0.4-2
    metacity 2.34.5-1
    metakit 2.4.9.7-5
    mime-types 8-1
    miniupnpc 1.6-2
    miro 5.0.2-1
    mixxx 1.10.1-1
    mjpegtools 2.0.0-2
    mkinitcpio 0.10-1
    mkinitcpio-busybox 1.20.1-1
    mkvtoolnix-cli 5.7.0-3
    mlocate 0.25-2
    mlt 0.8.0-1
    mobile-broadband-provider-info 20120614-1
    modemmanager 0.5.2.0-2
    modprobed_db 2.0-2
    mono 2.10.8-1
    mono-addins 0.6.2-2
    mono-basic 2.10-2
    mono-debugger 2.10-2
    mono-tools 2.10-2
    mono-upnp 0.1.2-1
    mono-zeroconf 0.9.0-3
    monodevelop 3.0.3.5-2
    monodevelop-debugger-gdb 3.0.3.5-1
    monodevelop-debugger-mdb 2.4-1
    mousetweaks 3.4.2-1
    mozilla-common 1.4-3
    mpfr 3.1.1-1
    mpg123 1.14.4-1
    mplayer 35014-1
    mtasc 20091229-4
    mtdev 1.1.2-1
    mtools 4.0.17-2
    musicbrainz 2.1.5-5
    mutagen 1.20-4
    mutter 3.4.1-2
    mx 1.4.6-1
    mysql 5.5.27-1
    mysql-clients 5.5.27-1
    mysql-python 1.2.3-3
    namcap 3.2.4-1
    nano 2.2.6-2
    nasm 2.10.03-1
    nautilus 3.4.2-1
    nautilus-dropbox 1.4.0-2
    nautilus-open-terminal 0.19-2
    nautilus-sendto 3.0.3-1
    ncftp 3.2.5-2
    ncurses 5.9-3
    neko 1.8.2-8
    neon 0.29.6-4
    nepomuk-core 4.9.0-1
    net-snmp 5.7.1-3
    net-tools 1.60.20110819cvs-3
    netcdf 4.2.1-1
    netkit-bsd-finger 0.17-7
    netlogo 5.0.2-1
    nettle 2.5-1
    network-manager-applet 0.9.4.1-1
    networkmanager 0.9.4.0-6
    networkmanager-dispatcher-netfs 1.0-2
    networkmanager-dispatcher-ntpd 1.0-3
    networkmanager-dispatcher-openntpd 1.0-4
    networkmanager-openconnect 0.9.4.0-1
    networkmanager-openvpn 0.9.4.0-1
    networkmanager-pptp 0.9.4.0-1
    networkmanager-vpnc 0.9.4.0-1
    nfs-utils 1.2.6-1
    nfsidmap 0.24-3
    nickle 2.70-2
    nltk-data 2.0-7
    nmap 6.01-1
    notification-daemon 0.7.4-1
    nouveau-dri 8.0.4-2
    nouveau-firmware 20091212-4
    nspluginwrapper 1.4.4-2.1
    nspr 4.9.2-1
    nss 3.13.5-1
    nss-mdns 0.10-5
    ntfs-3g 2012.1.15-3
    ntfsprogs 2012.1.15-3
    ntp 4.2.6.p5-7
    nvidia-cg-toolkit 3.1-2
    obex-data-server 0.4.6-2
    obexd-client 0.47-1
    ocaml 3.12.1-3
    ocrfeeder 0.7.9-1
    octave 3.6.2-1
    ogre 1.8.0-3
    ogre-docs 1.8.0-3
    ois 1.3-2
    opal 3.10.5-1
    openal 1.14-1
    opencollada 869-1
    openconnect 1:3.18-1
    opencore-amr 0.1.3-1
    opencv-svn 9044-1
    openexr 1.7.0-2
    openimageio 1.0.8-1
    openjpeg 1.5.0-1
    openmpi 1.6-2
    openntpd 3.9p1-15
    openobex 1.5-3
    openresolv 3.5.1-1
    opensc 0.12.2-3
    openslp 1.2.1-4
    openssh 6.0p1-3
    openssl 1.0.1.c-1
    openvpn 2.2.2-1
    oprofile 0.9.7-4
    orbit2 2.14.19-2
    orc 0.4.16-1
    orca 3.4.2-1
    oxygen-icons 4.9.0-1
    p11-kit 0.12-1
    p7zip 9.20.1-6
    package-query 1.0.1-1
    packagekit 0.6.22-1
    pacman 4.0.3-3
    pacman-color 4.0.3-3
    pacman-contrib 4.0.3-1
    pacman-mirrorlist 20120626-1
    pacmatic 20120218-1
    pam 1.1.5-4
    pambase 20120701-1
    pango 1.30.1-1
    pango-perl 1.223-2
    pangomm 2.28.4-1
    paprefs 0.9.10-2
    parted 3.1-1
    patch 2.6.1-3
    pavucontrol 1.0-1
    pbsdk-linux 1.1.0-1
    pciutils 3.1.10-1
    pcmciautils 018-4
    pcre 8.31-1
    pcsc-ctapi-wrapper 0.3-1
    pcsc-cyberjack 3.99.5_SP03-2
    pcsc-perl 1.4.12-3
    pcsc-tools 1.4.20-1
    pcsclite 1.8.5-1
    pdfcrack 0.11-1
    pdfedit 0.4.5-2
    pdnsd 1.2.9-2
    perl 5.16.1-1
    perl-crypt-ssleay 0.64-1
    perl-digest-sha1 2.13-3
    perl-encode-locale 1.03-1
    perl-error 0.17018-1
    perl-file-listing 6.04-1
    perl-html-parser 3.69-2
    perl-html-tagset 3.20-3
    perl-http-cookies 6.01-1
    perl-http-daemon 6.01-1
    perl-http-date 6.02-1
    perl-http-message 6.03-1
    perl-http-negotiate 6.01-1
    perl-image-exiftool 8.99-1
    perl-io-socket-ssl 1.76-1
    perl-libwww 6.04-1
    perl-locale-gettext 1.05-9
    perl-lwp-mediatypes 6.02-1
    perl-lwp-protocol-https 6.03-1
    perl-mozilla-ca 20120309-1
    perl-net-http 6.03-1
    perl-net-ssleay 1.48-2
    perl-string-crc32 1.4-8
    perl-test-pod 1.45-1
    perl-try-tiny 0.11-1
    perl-uri 1.60-1
    perl-www-robotrules 6.02-1
    perl-xml-libxml 1.98-1
    perl-xml-libxslt 1.77-1
    perl-xml-namespacesupport 1.11-2
    perl-xml-parser 2.41-3
    perl-xml-sax 0.99-3
    perl-xml-sax-base 1.08-2
    perl-xml-simple 2.20-1
    perl-yaml-syck 1.20-2
    pgu 0.18-1
    phonon 1:4.6.0-2
    phonon-gstreamer 4.6.2-1
    physfs 2.0.2-2
    pidgin 2.10.6-1
    pilot-link 0.12.5-3
    pinentry 0.8.1-4
    pitivi 0.15.2-1
    pixman 0.26.2-1
    pkg-config 0.27-1
    pkgfile 3-1
    pkgtools 24-3
    pm-quirks 0.20100619-2
    pm-utils 1.4.1-5
    podofo 0.9.1-3
    polipo 1.0.4.1-6
    polkit 0.105-1
    polkit-gnome 0.105-1
    polkit-qt 0.103.0-1
    poppler 0.20.2-1
    poppler-data 0.4.5-1
    poppler-glib 0.20.2-1
    poppler-qt 0.20.2-1
    popt 1.16-5
    portaudio 19_20111121-1
    portmidi 217-3
    postgresql-libs 9.1.4-1
    powertop 2.0-1
    ppl 1.0-1
    ppp 2.4.5-3
    pptpclient 1.7.2-4
    printproto 1.0.5-2
    prison 1.0-1
    procps-ng 3.3.3-3
    proj 4.8.0-1
    psmisc 22.19-1
    pstotext 1.9-2
    pth 2.0.7-4
    ptlib 2.10.5-1
    pulseaudio 2.1-1
    pulseaudio-alsa 2-1
    pv 1.3.4-1
    pyalpm 0.5.3-1
    pyatspi 2.4.0-1
    pygobject-devel 3.2.2-1
    pygobject2-devel 2.28.6-6
    pygoocanvas 0.14.1-5
    pygtk 2.24.0-3
    pygtksourceview2 2.10.1-4
    pyjamas 0.8-1
    pylint 0.25.2-1
    pyogg 1.3-7
    pyopenssl 0.13-1
    pyorbit 2.24.0-4
    pypy 1.9-1
    pyqt 4.9.4-2
    pyqt-common 4.9.4-2
    pyrex 0.9.9-3
    pyrtf 0.45-5
    pyside 1.1.0-1
    pyside-tools 0.2.13-5
    python 3.2.3-3
    python-all-odfpy 0.9.4-2
    python-boto 2.4.1-1
    python-cairo 1.10.0-1
    python-cjson 1.0.5-4
    python-dbus 1.1.1-1
    python-dbus-common 1.1.1-1
    python-decorator 3.3.3-1
    python-distribute 0.6.28-1
    python-distutils-extra 2.32-1
    python-docs 3.2.3-1
    python-docutils 0.9.1-1
    python-egenix-mx-base 3.2.4-1
    python-foolscap 0.6.3-1
    python-fpconst 0.7.3-3
    python-gnomekeyring 2.32.0-10
    python-gnupginterface 0.3.2-6
    python-gtop 2.32.0-10
    python-imaging 1.1.7-4
    python-jinja 2.6-2
    python-logilab-astng 0.24.0-1
    python-logilab-common 0.58.2-1
    python-lxml 2.3.5-1
    python-m2crypto 0.21.1-1
    python-markupsafe 0.15-1
    python-mechanize 0.2.5-2
    python-nose 1.1.2-3
    python-notify 0.1.1-11
    python-numpy 1.6.2-1
    python-opengl 3.0.1-4
    python-paramiko 1.7.7.1-2
    python-pexpect 2.4-1
    python-pip 1.1-1
    python-pychart 1.39-6
    python-pycurl 7.19.0-6
    python-pyelftools 0.20-1
    python-pyenchant 1.6.5-1
    python-pygame 1.9.1-5
    python-pygments 1.5-2
    python-pyparsing 1.5.6-2
    python-pysqlite 2.6.3-2
    python-pyzmq 2.2.0-1
    python-qscintilla 2.6.2-1
    python-qscintilla-common 2.6.2-1
    python-reportlab 2.5-2
    python-rope 0.9.3-6
    python-rsvg 2.32.0-10
    python-scipy 0.10.1-1
    python-sip 4.13.3-2
    python-soappy 0.12.0-10
    python-south 0.7.6-1
    python-sphinx 1.1.3-2
    python-sqlalchemy 0.7.6-1
    python-tornado 2.2.1-1
    python-wnck 2.32.0-10
    python-yaml 3.10-2
    python2 2.7.3-2
    python2-beautifulsoup3 3.2.1-1
    python2-bonobo 2.28.1-8
    python2-bsdiff4 1.1.1-1
    python2-cairo 1.10.0-1
    python2-cherrypy 3.2.2-1
    python2-crypto 2.6-2
    python2-cssutils 0.9.9-2
    python2-dateutil 1.5-2
    python2-dbus 1.1.1-1
    python2-distribute 0.6.28-1
    python2-distutils-extra 2.32-1
    python2-dnspython 1.10.0-1
    python2-docutils 0.9.1-1
    python2-egg 2.25.3-12
    python2-gconf 2.28.1-8
    python2-gksu2 2.25.3-12
    python2-gnomecanvas 2.28.1-8
    python2-gnomevfs 2.28.1-8
    python2-gobject 3.2.2-1
    python2-gobject2 2.28.6-6
    python2-gtkhtml2 2.25.3-12
    python2-gtkspell 2.25.3-12
    python2-html5lib 0.95-1
    python2-jinja 2.6-2
    python2-libgnome 2.28.1-8
    python2-lxml 2.3.5-1
    python2-markupsafe 0.15-1
    python2-matplotlib 1.1.1-1
    python2-nltk 2.0.2-1
    python2-nose 1.1.2-3
    python2-numpy 1.6.2-1
    python2-pip 1.1-1
    python2-ply 3.4-1
    python2-poppler 0.12.1-7
    python2-psycopg2 2.4.5-1
    python2-pychm 0.8.4-1
    python2-pyenchant 1.6.5-1
    python2-pygments 1.5-2
    python2-pyopenssl 0.13-1
    python2-pyparsing 1.5.6-2
    python2-pyqt 4.9.4-2
    python2-pytz 2012d-1
    python2-pyzmq 2.2.0-1
    python2-qscintilla 2.6.2-1
    python2-rope 0.9.4-1
    python2-sip 4.13.3-2
    python2-sphinx 1.1.3-2
    python2-sqlalchemy 0.7.6-1
    python2-tornado 2.2.1-1
    python2-w3lib 1.0-1
    python2-xdg 0.23-1
    python2-yaml 3.10-2
    python2-zope-interface 3.8.0-1
    python3-html5lib-hg 1757-1
    pywebkitgtk 1.1.8-2
    pyxml 0.8.4-9
    q4wine 0.121-4
    qca 2.0.3-2
    qcachegrind 0.7.1-1
    qemu-kvm 1.1.1-1
    qhull 2012.1-1
    qimageblitz 0.0.6-2
    qjson 0.7.1-2
    qrencode 3.3.1-1
    qscintilla 2.6.2-1
    qt 4.8.2-3
    qt-assistant-compat 4.6.3-2
    qt-doc 4.8.2-1
    qt3 1:3.3.8b-1
    qtcreator 2.5.2-1
    qtwebkit 2.2.2-1
    qucs 0.0.16-2
    r 2.15.1-2
    randrproto 1.4.0-1
    rapidsvn 0.12.0-5
    raptor 2.0.8-1
    rar 4.1.1-1
    rarcrack 0.2-1
    rarian 0.8.1-2
    rasqal 1:0.9.29-1
    rdesktop 1.7.1-2
    readline 6.2.004-1
    recode 3.6-7
    recoll 1.17.3-1
    recordmydesktop 0.3.8.1-6
    recordproto 1.14.2-1
    redland 1:1.0.15-3
    redland-storage-virtuoso 1:1.0.15-3
    reiserfsprogs 3.6.21-4
    remmina 1.0.0-9
    renderproto 0.11.1-2
    rest 0.7.12-1
    rpcbind 0.2.0-8
    rsync 3.0.9-3
    rtkit 0.11-1
    rtmpdump 2.4-1
    ruby 1.9.3_p194-2
    ruby-atk 1.1.3-2
    ruby-cairo 1.12.2-1
    ruby-docs 1.9.3_p194-1
    ruby-gdkpixbuf2 1.1.3-2
    ruby-gio2 1.1.3-2
    ruby-glib2 1.1.3-2
    ruby-gtk2 1.1.3-2
    ruby-pango 1.1.3-2
    ruby-pkgconfig 1.1.3-1
    run-parts 4.3.2-1
    rygel 0.14.3-1
    sage-mathematics 5.2-1
    samba 3.6.7-1
    sane 1.0.22-9
    sbcl 1.0.57-1
    scanmem 0.12-2
    schroedinger 1.0.11-1
    scite 3.2.1-1
    scrapy-stable-git 20110925-1
    screen 4.0.3-13
    screenlets 0.1.6-3
    scribus 1.4.1-1
    scrnsaverproto 1.2.2-1
    scummvm 1.4.1-2
    sdl 1.2.15-1
    sdl_gfx 2.0.23-1
    sdl_image 1.2.12-2
    sdl_mixer 1.2.12-1
    sdl_net 1.2.8-1
    sdl_sound 1.0.3-3
    sdl_ttf 2.0.11-2
    seabios 1.7.0-1
    seahorse 3.4.1-1
    sed 4.2.1-4
    seed 3.2.0-2
    setconf 0.5.2-1
    sfml 2.0rc1-2
    sg3_utils 1.33-1
    shadow 4.1.5.1-1
    shared-color-profiles 0.1.5-1
    shared-color-targets 0.1.1-1
    shared-desktop-ontologies 0.10.0-1
    shared-mime-info 1.0-1
    shotwell 0.12.3-1
    sigil 0.5.902-1
    sip 4.13.3-2
    sk1libs 0.9.1-3
    skype 4.0.0.8-1
    skype4pidgin 20110407-1
    slang 2.2.4-2
    slashem 0.0.7E7F3-2
    slim 1.3.4-2
    smartmontools 5.43-1
    smbclient 3.6.7-1
    smpeg 0.4.4-6
    smplayer 0.8.0-1
    smplayer-themes 20120131-1
    sofia-sip 1.12.11-1
    soprano 2.8.0-2
    sound-juicer 3.4.0-1
    sound-theme-freedesktop 0.7-2
    soundtouch 1.6.0-1
    sox 14.4.0-3
    speech-dispatcher 0.7.1-6
    speex 1.2rc1-2
    splint 3.1.2-3
    sqlite 3.7.13-1
    sqlite2 2.8.17-5
    sqlitebrowser 2.0b1-2
    sqliteman 1.2.2-5
    startup-notification 0.12-3
    strigi 0.7.7-2
    stunnel 4.53-2
    subversion 1.7.5-2
    sudo 1.8.5.p2-1
    suitesparse 4.0.2-1
    supermeatboy 20120607-16
    sushi 0.4.1-2
    swftools 0.9.2-1
    swig 2.0.7-2
    switzerland 0.1.0-2
    sysfsutils 2.1.0-8
    syslinux 4.05-4
    syslog-ng 3.3.5-2
    system-config-lvm 1.1.16-1
    systemd 188-2
    systemd-arch-units 20120704-1
    systemd-sysvcompat 188-2
    systemd-tools 188-2
    systemd-ui-git 20120807-1
    t1lib 5.1.2-3
    taglib 1.7.2-2
    taglib-sharp 2.0.4.0-1
    talloc 2.0.7-1
    tar 1.26-2
    tcl 8.5.12-1
    tdb 1.2.9-2
    telepathy-farstream 0.4.0-1
    telepathy-gabble 0.16.1-1
    telepathy-glib 0.18.1-1
    telepathy-haze 0.6.0-2
    telepathy-idle 0.1.11-1
    telepathy-logger 0.4.0-1
    telepathy-mission-control 5.12.1-1
    telepathy-rakia 0.7.4-1
    telepathy-salut 0.8.0-1
    terminal 0.4.8-2
    tesseract 3.01-3
    texi2html 5.0-2
    texinfo 4.13a-7
    texlive-bibtexextra 2012.26868-1
    texlive-bin 2012.0-3
    texlive-core 2012.26892-2
    texlive-fontsextra 2012.26866-1
    texlive-formatsextra 2012.26689-1
    texlive-games 2012.26207-1
    texlive-genericextra 2012.26700-1
    texlive-htmlxml 2012.24013-1
    texlive-humanities 2012.25861-1
    texlive-langcjk 2012.26777-2
    texlive-langcyrillic 2012.26689-1
    texlive-langextra 2012.26750-1
    texlive-langgreek 2012.26313-1
    texlive-latexextra 2012.26807-1
    texlive-music 2012.26726-1
    texlive-pictures 2012.26791-1
    texlive-plainextra 2012.25953-1
    texlive-pstricks 2012.26865-1
    texlive-publishers 2012.26831-1
    texlive-science 2012.26607-1
    texmacs 1.0.7.15-1
    tftp-hpa 5.2-2
    thunar 1.4.0-2
    tk 8.5.12-1
    tmux 1.6-2
    tofrodos 1.7.9-1
    tomboy 1.10.2-1
    tor 0.2.2.37-1
    totem 3.4.3-1
    totem-plparser 3.4.2-1
    totem-plugin 3.4.3-1
    totem-plugin-arte 3.1.1-1
    tracker 0.14.2-1
    transcode 1.1.7-5
    transfig 3.2.5d-1
    transmission-gtk 2.61-1
    truecrypt 1:7.1a-1
    tsocks 1.8beta5-5
    ttf-adobe-fangsong 5.004-1
    ttf-adobe-fonts 10.1.2-1
    ttf-adobe-heiti 5.005-1
    ttf-adobe-kaiti 5.004-1
    ttf-adobe-song 5.002-1
    ttf-arphic-ukai 0.2.20080216.1-3
    ttf-arphic-uming 0.2.20080216.1-3
    ttf-baekmuk 2.2-7
    ttf-bitstream-vera 1.10-8
    ttf-cheapskate 2.0-8
    ttf-dejavu 2.33-3
    ttf-droid 20110417-2
    ttf-freebanglafont 20120206-2
    ttf-freefont 20120503-1
    ttf-indic-otf 0.2-6
    ttf-linux-libertine 5.3.0-1
    ttf-ms-fonts 2.0-9
    ttf-sazanami 20040629-7
    ttf-source-sans-pro 1.033-2
    ttf-tlwg 0.5.0-1
    ttf-ubraille 001.000-6
    ttf-vista-fonts 1-5
    tumbler 0.1.25-1
    twisted 12.1.0-1
    tzdata 2012e-1
    udisks 1.0.4-4
    udisks2 1.94.0-2
    uniconvertor 1.1.5-5
    unixodbc 2.3.1-1
    unpaper 0.4.2-1
    unrar 4.2.4-1
    unrtf 0.21.2-1
    unzip 6.0-6
    upower 0.9.17-2
    usb_modeswitch 1.2.3-2
    usbmuxd 1.0.8-1
    usbutils 006-1
    util-linux 2.21.2-5
    v4l-utils 0.8.8-1
    v8 3.9.9-1
    vala 0.16.1-1
    valgrind 3.8.0-1
    vba-m-gtk-svn 1108-1
    vbaexpress 1.2-5
    vcdimager 0.7.24-2
    vde2 2.3.2-1
    vdpau-video 0.7.3-3
    vi 1:050325-2
    vidalia 0.2.20-1
    videoproto 2.3.1-2
    vim 7.3.600-1
    vim-a 2.18-6
    vim-bufexplorer 7.2.8-5
    vim-buftabs 0.18-1
    vim-clang-complete 1.8-1
    vim-colorsamplerpack 8.03-3
    vim-doxygentoolkit 0.2.13-2
    vim-guicolorscheme 1.2-3
    vim-minibufexpl 6.4.2-2
    vim-project 1.4.1-6
    vim-runtime 7.3.600-1
    vim-spell-de 20120506-1
    vim-spell-en 20120506-1
    vim-taglist 45-5
    vim-vcscommand 1.99.46-2
    vim-workspace 1.0b1-6
    vinagre 3.4.2-1
    vino 3.4.2-1
    virtualbox 4.1.18-5
    virtualbox-ext-oracle 4.1.18-1
    virtualbox-modules 4.1.18-4
    virtualbox-source 4.1.18-5
    virtuoso 6.1.6-1
    virtuoso-base 6.1.6-1
    visualboyadvance 1.7.2-9
    vlc 2.0.3-2
    vpnc 0.5.3.svn516-3
    vte 0.28.2-3
    vte-common 0.32.2-1
    vte-sharp 2.26.0-8
    vte3 0.32.2-1
    vulture-nethack 2.3.67-0
    warsow 1.0-1
    warsow-data 1.0-1
    wavpack 4.60.1-2
    webkit-sharp 0.3-4
    webrtc-audio-processing 0.1-1
    weka 3.7.5-1
    wesnoth 1.10.3-2
    wesnoth-data 1.10.3-1
    wget 1.14-1
    which 2.20-5
    whois 5.0.18-1
    widelands 17-3
    widelands-data 17-1
    wildmidi 0.2.3.5-2
    wine 1.5.10-1
    wine_gecko 1.7-1
    winegame 0.2.0-2
    winestuff 0.2.0-2
    winetricks 20120308-1
    wireless-regdb 2011.04.28-1
    wireless_tools 29-6
    wireshark-cli 1.8.1-1
    wireshark-gtk 1.8.1-1
    wnck-sharp 2.26.0-8
    wpa_supplicant 1.0-1
    wvdial 1.61-4
    wvstreams 4.6.1-5
    wxgtk 2.8.12.1-3
    wxmaxima 12.04.0-1
    wxpython 2.8.12.1-3
    x264 20120705-1
    xapian-core 1.2.12-1
    xbitmaps 1.1.1-2
    xcb-proto 1.7.1-1
    xcb-util 0.3.9-1
    xcb-util-keysyms 0.3.9-1
    xchat 2.8.8-10
    xcursor-themes 1.0.3-2
    xdg-user-dirs 0.14-3
    xdg-utils 1.1.0-2.20120520
    xerces-c 3.1.1-3
    xextproto 7.2.1-1
    xf86-input-evdev 2.7.3-1
    xf86-input-synaptics 1.6.2-1
    xf86-video-fbdev 0.4.3-1
    xf86-video-nouveau 1.0.1-1
    xf86-video-vesa 2.3.2-1
    xf86dgaproto 2.1-2
    xf86vidmodeproto 2.3.1-2
    xfce4-appfinder 4.10.0-1
    xfce4-mixer 4.8.0-4
    xfce4-panel 4.10.0-1
    xfce4-session 4.10.0-3
    xfce4-settings 4.10.0-2
    xfconf 4.10.0-2
    xfdesktop 4.10.0-3
    xfsprogs 3.1.8-2
    xfwm4 4.10.0-2
    xfwm4-themes 4.10.0-1
    xine-lib 1.2.2-1
    xine-ui 0.99.7-1
    xineramaproto 1.2.1-2
    xinetd 2.3.15-2
    xkeyboard-config 2.6-1
    xmind 3.2.1-1
    xmldiff 0.6.10-2
    xmlto 0.0.25-2
    xmlwrapp 0.6.2-2
    xorg-bdftopcf 1.0.3-2
    xorg-docs 1.7-1
    xorg-font-util 1.3.0-1
    xorg-font-utils 7.6-3
    xorg-fonts-100dpi 1.0.1-4
    xorg-fonts-75dpi 1.0.1-4
    xorg-fonts-alias 1.0.2-2
    xorg-fonts-encodings 1.0.4-3
    xorg-fonts-misc 1.0.1-2
    xorg-iceauth 1.0.5-1
    xorg-luit 1.1.1-1
    xorg-mkfontdir 1.0.7-1
    xorg-mkfontscale 1.1.0-1
    xorg-server 1.12.3.901-1
    xorg-server-common 1.12.3.901-1
    xorg-server-devel 1.12.3.901-1
    xorg-server-utils 7.6-3
    xorg-sessreg 1.0.7-1
    xorg-setxkbmap 1.3.0-1
    xorg-twm 1.0.7-1
    xorg-util-macros 1.17-1
    xorg-utils 7.6-8
    xorg-xauth 1.0.7-1
    xorg-xbacklight 1.1.2-3
    xorg-xcmsdb 1.0.4-1
    xorg-xdpyinfo 1.3.0-1
    xorg-xdriinfo 1.0.4-3
    xorg-xev 1.2.0-1
    xorg-xgamma 1.0.5-1
    xorg-xhost 1.0.5-1
    xorg-xinit 1.3.2-1
    xorg-xinput 1.6.0-1
    xorg-xkbcomp 1.2.4-1
    xorg-xlsatoms 1.1.1-1
    xorg-xlsclients 1.1.2-2
    xorg-xmessage 1.0.3-2
    xorg-xmodmap 1.0.7-1
    xorg-xprop 1.2.1-1
    xorg-xrandr 1.3.5-1
    xorg-xrdb 1.0.9-2
    xorg-xrefresh 1.0.4-3
    xorg-xset 1.2.2-1
    xorg-xsetroot 1.1.0-3
    xorg-xvinfo 1.1.1-3
    xorg-xwininfo 1.1.2-1
    xpdf 3.03-2
    xplc 0.3.13-4
    xproto 7.0.23-1
    xterm 281-1
    xulrunner192 1.9.2.28-3
    xvidcore 1.3.2-1
    xz 5.0.4-1
    yajl 2.0.4-1
    yaourt 1.1-1
    yasm 1.2.0-2
    yelp 3.4.2-1
    yelp-xsl 3.4.2-1
    zeitgeist 0.9.0.1-1
    zenity 3.4.0-1
    zeromq 2.2.0-2
    zip 3.0-3
    zlib 1.2.7-1
    zsh 5.0.0-2
    zsh-completions-git 20120808-2
    zvbi 0.2.33-4
    zziplib 0.13.62-1
    Here some logs:
    % journalctl
    Aug 13 20:16:58 Primat systemd-journal[141]: Journal started
    Aug 13 20:16:59 Primat systemd-modules-load[149]: Inserted module 'nfs'
    Aug 13 20:17:06 Primat vgchange[219]: 3 logical volume(s) in volume group "vg_Primat" now active
    Aug 13 20:17:08 Primat mtp-probe[365]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4"
    Aug 13 20:17:08 Primat mtp-probe[349]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1"
    Aug 13 20:17:08 Primat mtp-probe[365]: bus: 1, device: 3 was not an MTP device
    Aug 13 20:17:08 Primat mtp-probe[349]: bus: 4, device: 2 was not an MTP device
    Aug 13 20:17:11 Primat systemd-cryptsetup[439]: Set cipher aes, mode cbc-essiv:sha256, key size 256 bits for device /dev/sda1.
    Aug 13 20:17:14 Primat systemd-fsck[437]: /dev/sda2: sauber, 344/122160 Dateien, 288834/487974 Blöcke
    Aug 13 20:17:20 Primat mkswap[483]: mkswap: /dev/mapper/swap: warning: don't erase bootbits sectors
    Aug 13 20:17:20 Primat mkswap[483]: on whole disk. Use -f to force.
    Aug 13 20:17:21 Primat mkswap[483]: Swapbereich Version 1 wird angelegt, Größe = 6265312 KiB
    Aug 13 20:17:21 Primat mkswap[483]: kein Label, UUID=cbbb92b0-02cb-46c4-8051-efa98b0669c8
    Aug 13 20:17:22 Primat bluetoothd[497]: bluetoothd[497]: Bluetooth daemon 4.101
    Aug 13 20:17:21 Primat bluetoothd[497]: Bluetooth daemon 4.101
    Aug 13 20:17:22 Primat avahi-daemon[501]: Found user 'avahi' (UID 84) and group 'avahi' (GID 84).
    Aug 13 20:17:22 Primat avahi-daemon[501]: Successfully dropped root privileges.
    Aug 13 20:17:22 Primat avahi-daemon[501]: avahi-daemon 0.6.31 starting up.
    Aug 13 20:17:22 Primat acpid[505]: starting up with netlink and the input layer
    Aug 13 20:17:22 Primat acpid[505]: 4 rules loaded
    Aug 13 20:17:22 Primat acpid[505]: waiting for events: event logging is off
    Aug 13 20:17:22 Primat /usr/sbin/crond[498]: (CRON) INFO (Syslog will be used instead of sendmail.): Datei oder Verzeichnis nicht gefunden
    Aug 13 20:17:22 Primat /usr/sbin/crond[498]: (CRON) INFO (running with inotify support)
    Aug 13 20:17:22 Primat smartd[522]: smartd 5.43 2012-06-30 r3573 [x86_64-linux-3.4.8-1-ck] (local build)
    Aug 13 20:17:22 Primat smartd[522]: Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
    Aug 13 20:17:22 Primat smartd[522]: Opened configuration file /etc/smartd.conf
    Aug 13 20:17:22 Primat smartd[522]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
    Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda, type changed from 'scsi' to 'sat'
    Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda [SAT], opened
    Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda [SAT], SAMSUNG HM320JI, S/N:S16LJD0Q4*****, WWN:5-0f0000-0014*****, FW:2SS00_01, 320 GB
    Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda [SAT], found in smartd database: SAMSUNG SpinPoint M6
    Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: Starting SDP server
    Aug 13 20:17:23 Primat bluetoothd[497]: Starting SDP server
    Aug 13 20:17:23 Primat avahi-daemon[501]: Successfully called chroot().
    Aug 13 20:17:23 Primat avahi-daemon[501]: Successfully dropped remaining capabilities.
    Aug 13 20:17:23 Primat avahi-daemon[501]: Loading service file /services/sftp-ssh.service.
    Aug 13 20:17:23 Primat avahi-daemon[501]: Loading service file /services/ssh.service.
    Aug 13 20:17:23 Primat avahi-daemon[501]: Loading service file /services/udisks.service.
    Aug 13 20:17:23 Primat avahi-daemon[501]: Network interface enumeration completed.
    Aug 13 20:17:23 Primat avahi-daemon[501]: Registering HINFO record with values 'X86_64'/'LINUX'.
    Aug 13 20:17:23 Primat avahi-daemon[501]: Server startup complete. Host name is Primat.local. Local service cookie is 59663620.
    Aug 13 20:17:23 Primat avahi-daemon[501]: Service "Primat" (/services/udisks.service) successfully established.
    Aug 13 20:17:23 Primat avahi-daemon[501]: Service "Primat" (/services/ssh.service) successfully established.
    Aug 13 20:17:23 Primat avahi-daemon[501]: Service "Primat" (/services/sftp-ssh.service) successfully established.
    Aug 13 20:17:23 Primat systemd-logind[525]: New seat seat0.
    Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: Bluetooth Management interface initialized
    Aug 13 20:17:23 Primat bluetoothd[497]: Bluetooth Management interface initialized
    Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event4 (Power Button)
    Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event1 (Video Bus)
    Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event3 (Power Button)
    Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event2 (Lid Switch)
    Aug 13 20:17:23 Primat NetworkManager[516]: <info> NetworkManager (version 0.9.4.0) is starting...
    Aug 13 20:17:23 Primat NetworkManager[516]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
    Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.vpnc
    Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
    Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
    Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.openconnect
    Aug 13 20:17:23 Primat dbus-daemon[527]: dbus[527]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
    Aug 13 20:17:23 Primat dbus[527]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
    Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: input-headset driver probe failed for device 6C:9B:02:FD:**:**
    Aug 13 20:17:23 Primat bluetoothd[497]: input-headset driver probe failed for device 6C:9B:02:FD:**:**
    Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: input-headset driver probe failed for device 00:1B:DC:04:**:**
    Aug 13 20:17:23 Primat bluetoothd[497]: input-headset driver probe failed for device 00:1B:DC:04:**:**
    Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: input-headset driver probe failed for device BC:B1:F3:C8:**:**
    Aug 13 20:17:23 Primat bluetoothd[497]: input-headset driver probe failed for device BC:B1:F3:C8:**:**
    Aug 13 20:17:23 Primat smartd[522]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
    Aug 13 20:17:23 Primat smartd[522]: Monitoring 1 ATA and 0 SCSI devices
    Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: Adapter /org/bluez/497/hci0 has been enabled
    Aug 13 20:17:23 Primat bluetoothd[497]: Adapter /org/bluez/497/hci0 has been enabled
    Aug 13 20:17:24 Primat smartd[522]: Device: /dev/sda [SAT], previous self-test was interrupted by the host with a reset
    Aug 13 20:17:24 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
    Aug 13 20:17:24 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
    Aug 13 20:17:24 Primat NetworkManager[516]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
    Aug 13 20:17:24 Primat NetworkManager[516]: keyfile: parsing *** ...
    Aug 13 20:17:25 Primat acpid[505]: client connected from 849[0:0]
    Aug 13 20:17:25 Primat acpid[505]: 1 client rule loaded
    Aug 13 20:17:27 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
    Aug 13 20:17:27 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
    Aug 13 20:17:28 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.ColorManager'
    Aug 13 20:17:28 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.ColorManager'
    Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
    Aug 13 20:17:29 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
    Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.Accounts'
    Aug 13 20:17:29 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.Accounts'
    Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
    Aug 13 20:17:29 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
    Aug 13 20:17:29 Primat console-kit-daemon[887]: missing action
    Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
    Aug 13 20:17:29 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
    Aug 13 20:17:30 Primat systemd-logind[525]: New session 1 of user gdm.
    Aug 13 20:17:30 Primat systemd-logind[525]: Linked /tmp/.X11-unix/X0 to /run/user/120/X11-display.
    Aug 13 20:17:30 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.colord-sane' unit='colord-sane.service'
    Aug 13 20:17:30 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.colord-sane' unit='colord-sane.service'
    Aug 13 20:17:31 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.colord-sane'
    Aug 13 20:17:31 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.colord-sane'
    Aug 13 20:17:32 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
    Aug 13 20:17:32 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
    Aug 13 20:17:32 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.UPower'
    Aug 13 20:17:32 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.UPower'
    Aug 13 20:17:36 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
    Aug 13 20:17:36 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
    Aug 13 20:17:36 Primat systemd[1]: Failed to create cgroup cpu:/: No such file or directory
    Aug 13 20:17:40 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
    Aug 13 20:17:40 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
    Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPAG
    Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPHS
    Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSource
    Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSink
    Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPAG
    Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPHS
    Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSource
    Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSink
    Aug 13 20:17:42 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=120 pid=1629 comm="gnome-shell --gdm-mode ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=887 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Aug 13 20:17:42 Primat dbus[527]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=120 pid=1629 comm="gnome-shell --gdm-mode ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=887 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Aug 13 20:18:26 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start timed out.
    Aug 13 20:18:26 Primat systemd[1]: Job home.mount/start failed with result 'dependency'.
    Aug 13 20:18:26 Primat systemd[1]: Job systemd-fsck@dev-mapper-vg_Primat\x2dlv_Home.service/start failed with result 'dependency'.
    Aug 13 20:18:26 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start failed with result 'timeout'.
    Aug 13 20:18:38 Primat acpid[505]: client 849[0:0] has disconnected
    Aug 13 20:18:52 Primat systemd[1]: NetworkManager.service operation timed out. Terminating.
    Aug 13 20:18:52 Primat NetworkManager[516]: <info> caught signal 15, shutting down normally.
    Aug 13 20:19:48 Primat acpid[505]: client connected from 849[0:0]
    Aug 13 20:19:48 Primat acpid[505]: 1 client rule loaded
    Aug 13 20:19:52 Primat acpid[505]: client 849[0:0] has disconnected
    Aug 13 20:19:55 Primat acpid[505]: client connected from 849[0:0]
    Aug 13 20:19:55 Primat acpid[505]: 1 client rule loaded
    Aug 13 20:19:58 Primat systemd-logind[525]: Power key pressed.
    Aug 13 20:19:58 Primat systemd-logind[525]: Refusing power-off, user is logged in.
    Aug 13 20:19:58 Primat systemd[1]: Job graphical.target/start failed with result 'dependency'.
    Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Terminating
    Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSink
    Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSource
    Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPAG
    Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPHS
    Aug 13 20:19:58 Primat bluetoothd[497]: Terminating
    Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSink
    Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSource
    Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPAG
    Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPHS
    Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
    Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
    Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
    Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
    Aug 13 20:19:58 Primat avahi-daemon[501]: Got SIGTERM, quitting.
    Aug 13 20:19:58 Primat acpid[505]: exiting
    Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
    Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
    Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
    Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
    Aug 13 20:19:58 Primat iptables-flush[1693]: /usr/sbin/iptables
    Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Stopping SDP server
    Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Exit
    Aug 13 20:19:58 Primat avahi-daemon[501]: avahi-daemon 0.6.31 exiting.
    Aug 13 20:19:58 Primat bluetoothd[497]: Stopping SDP server
    Aug 13 20:19:58 Primat bluetoothd[497]: Exit
    Aug 13 20:20:10 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start timed out.
    Aug 13 20:20:10 Primat systemd[1]: Job systemd-fsck@dev-mapper-vg_Primat\x2dlv_Home.service/start failed with result 'dependency'.
    Aug 13 20:20:10 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start failed with result 'timeout'.
    Aug 13 20:20:22 Primat systemd[1]: NetworkManager.service stopping timed out (2). Killing.
    Aug 13 20:20:22 Primat systemd[1]: Unit NetworkManager.service entered failed state.
    Aug 13 20:21:28 Primat systemd[1]: Job dev-mapper-swap.device/stop timed out.
    Aug 13 20:21:28 Primat systemd[1]: Job dev-mapper-swap.device/stop failed with result 'timeout'.
    Aug 13 20:21:28 Primat systemd[1]: Job dev-disk-by\x2duuid-cbbb92b0\x2d02cb\x2d46c4\x2d8051\x2defa98b0669c8.device/stop timed out.
    Aug 13 20:21:28 Primat systemd[1]: Job dev-disk-by\x2duuid-cbbb92b0\x2d02cb\x2d46c4\x2d8051\x2defa98b0669c8.

    Your problem sounds similar to this one, except that they're using software raid rather than just pure LVM. If you're using an initrd, you may not have the appropriate modules installed. If you're not using an initrd, then the kernel probably needs LVM support compiled in (not as a module) and could be solved by fixing that. I have never used the ck-patchset, but this should give you an additional data point.
    Also comment=systemd.automount will be deprecated soon as I understand it; if you have a need for automounting, x-systemd.automount should be used instead.

  • Problems with SATA and 865-Neo Series 2

    Hi All,
    My configuration is as follow:
    MS-6278, 1GB OCZ RAM, Enermax 465VE P/S, Ti42008x, Seagate 250 and 320 SATA Perpendicular drives - no raid setup.
    Okay - So I have 2 SATA drives and 2 PATA CDROMS in the computer.
    Everything has been working fine until last night.
    What happens now is that when I boot up the computer, the post screen comes up, all drives are detected and I get a single beep. Then the computer sits there. I watch the HDD light, and after the first initial seek and detect - the HDD never moves again.
    I also tried booting off a CD by hitting F11 during the boot up tests. I get the option to select a CD drive, and select it, nothing happens. Stuck at post screen.
    No power outages, no weird behavior up until I soft rebooted the machine. Since then I can't get past the BIOS.
    I did do a factory BIOS reset and then I was able to boot using the Windows XP CD, but couldn't find the drives in recovery mode (since the SATA driver hadn't been loaded).
    I tried leaving the working settings alone and disconnected the power to the SATA driver, and still could not boot off the CDROM with SATA setup.
    Any help, ideas? Is my motherboard dead or something?
    Thanks in advance!

    CPU - Intel 2.8 Hyperthreading.
    Really weird.
    So I took your suggestion and downloaded Seagate tools. Then I reset the BIOS so that I could boot from the CD. Of course, my SATA drives were not found. So I went back and activated the SATA in the BIOS. This time, I put left the Seagate disk in and tried F11. Bingo - I was able to run the CD. Then I ran the File System and Quick Disk checks. The File system test said that both of my drives had files errors. The util said I needed to fix the files using the Windows disk.
    Then I quit. I have three CD drives - so I left the Seagate disk in, and put in knoppix and windows. I attempted to boot of the Windows disk and got a cannot book NTLOADER error, then it went to the hard drives and started booting up the OS!
    I rebooted once, no problems!
    i am running Scandisk now on the boot drive - no errors on 1, 2, 3/5 stages - stage 4 in progress now.
    I will keep you posted.

  • How many IDE drives & CDrom can be installed with SATA drives??

    How many IDE drives & CDrom can be installed with SATA drives??
    i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
    & if it can be added, can i install 2 SATA drives???
    THX in advance

    The 3 versions of this board that are available are:
    875P Neo-FISR (PCB 2.0)
    875P Neo-LSR (PCB 1.0)
    875P Neo-FIS2R (PCB 1.0)
    All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
    2 x SATA (Supporting 2 SATA HDD drives)
    2 x PATA (Supporting 4 IDE devices)
    All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
    ->INTEGRATED PERIPHERALS
    ->ON-CHIP IDE CONFIG
    ATA CONFIG: S-ATA ONLY or P-ATA ONLY
    S-ATA/P-ATA KEEP ENABLED: YES
    OPERATE MODE:
    If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
    If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
    2 x SATA (Supporting 2 SATA HDD drives)
    1 x PATA (Supporting 1 Master IDE HDD drive)
    The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
    So the answer to your origional question is:
    2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
    or
    4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0)

  • Which is better, Raid 0 with two hdds or 1 ssd?

    Hi,
    I have a macbook pro Mid 2010 with two open hard drive bays (thanks to the mce optibay.) I was wondering if it would be better to put two caviar black hard drives in raid 0 on my macbook pro, or have one vertex 2 drive as a boot/applications drive and another data drive.
    Thanks
    Sam

    I understood what the hard-drive-in-optibay meant.  Regardless, it's still two platter-based hard drives versus an SSD.  An SSD will be faster in your situation.  If you had a lot of platter-drives in RAID0 and you had some sort of hardware based RAID controller with battery-backed cache, then maybe, possible, potentially, that (really expensive) platter-based RAID0 could be as fast as a SSD.  You don't have that and can't put that in a notebook, so it ain't gonna happen for you.
    Now add to the mix, the fact that RAID0 will lose data if any one of the drives in the array fails.  You have two drives in RAID0 versus one drive in a non-RAID.  The RAID is twice as likely to have a drive failure just because you have more drives.  If you made the RAID from two SSD drives, which are more reliable than platter-based drives, then you're got something interesting.  But you're still twice as likely to have a SSD-RAID0 array failure compared to a single non-RAID SSD.  (And more than twice if it's platter-based drives in the RAID0 versus a single non-RAID SSD.)  So it's up to you to determing how much risk you are willing to take...and how much you can afford.
    Also note that some Macbook and Macbook Pro models have slower performance on the SATA port for the optical drive.  (One assumes Apple tried to save a few dollars and put in a older, slower SATA controller for the optical drive.)  I don't know exactly which models but if yours is one of those, then you may get uneven performance on your RAID0.  Whether that is noticable or acceptable to you, will depend on a lot of things that you won't  know until you try.  (e.g.: model of drive, apps you're using.)
    And it's good that "backup is easy for you."  With RAID0 for the boot volume, you're that much more likely to have a failed boot volume.  (IOW, can't boot the Mac at all, which means you'll be using that easily made backup a lot. )  Ideally, workstations that used RAID0 used them for the data, not for the OS.  For example, in video editing, the scratch disk needs to be fast, but could be RAID0 because you "threw away" whatever was on the scratch disk after you were done editing, and presumably saved/copied the final edited product to another archival drive.  But the OS was on a typical single drive non-RAID (or a RAID1 or RAID5 if necessary,) not on a single RAID0 array for both OS and data.
    In your situation, you can't separate the OS and data onto separate RAID arrays, so in general, RAID0 is NOT what you want, regardless of whether you use SSDs or platter-based hard drives.  But again, only you can determine how much risk and cost you're willing to gamble with.

  • Problems Trying To Set Up Raid 0 On SATA (Plat SLI)

    I booted up for the first time and tried to install the drivers for RAID as I installed Windows. After installing the drivers, Windows wanted me to pick one of the drives, and I figured I should have set up the RAID using the RAID setup on the motherboard. I restarted to try and do this and it just tells me 'error loading operating system' every time. It will let me install Windows if I want to, but I want to set up my two drives in RAID 0 first - is this trouble 'cos Windows plonked some data on the drives? 
    Pressing F4 or Ctrl + S is supposed to invoke the RAID setup utility but it doesn't work (I don't get a screen like the manual says I should for five seconds either). Whilst installing Windows, F3 for 'exit' didn't work, whilst Esc for 'cancel' did...
    I've tried the reset CMOS button which didn't do anything useful either.
    Edit; just noticed 'T' and backspace doesn't work either. Could/must be a big fat keyboard issue.

    Sorry was on vacation last week.  Here is what you want to check.  In your Bios, (I think under Integrated Peripherals, but not 100% on that) There is an option for enaling or disabling the Silicon Raid controller, I recommend disabling it, especially if you want to use SATA II.  There is also an nVidiaRAID Config section, make sure that it is enabled and that the correct items are enabled underneath it.  The ones I have are:
    RAID ENABLE                       Enabled
    IDE Primary Master RAID        Disabled
    IDE Primary Slave   RAID        Disabled
    IDE Secondary Master RAID    Disabled
    IDE Secondary Slave RAID      Disabled
    SATA1 RAID                         Enabled
    SATA2 RAID                         Enabled
    SATA3 RAID                         Enabled
    SATA4 RAID                         Enabled
    Under the IDE Function setup make sure SATA1/SATA2 and SATA3/SATA4 are  ENABLED
    as mentioned before:
    Onboard SiI3132 RAID         Disabled
    Onboard SiI3132 Mode        RAID   (I have this set to raid although with the controller disabled I doubt it makes a difference)
    now after you get the Raid setup to launch and configure the array, go back into bios and make sure the boot sequence shows the raid array at the top of the list, if you only have the 2 drives it should already be there.
    after all of that, go back and install windows using the f6 to load BOTH drivers from thre floppy marked Nvidia Raid Drivers

  • G-raid or g-sata?

    i've been reading all the horror stories with lacie drives. i have a 500gb and it has been working fine for months. however, one of ours at work has crashed and one of the disks is non-recoverable.
    if i am to go with something else, i am assuming that since firewire capture and playback -- deck and storage being connected to the same firewire bus, and the fact that apple doesn't support firewire capture in FCP, wouldn't the g-sata be a better way to go than the g-raid? a bit more expensive maybe, and i need to get a pci-x card, but more stable and faster?
    please give pros and cons of g-raid vs g-sata.
    thanks
    carl

    please give pros and cons of g-raid vs g-sata.
    pro's
    G-RAID ... very portable, uses common FW400, and FW800 protocols
    supports multiple stream DV25, DV50 video playback
    G-SATA ... blazingly fast transfer speeds up to 135 MB/s
    supports multiple stream uncompressed video playback
    con's
    G-RAID ... not as fast as G-SATA
    needs FW800 host bus adapter or cardbus adapter if capturing on built-in FW bus
    G-SATA ... needs SATA host bus adapter or cardbus adapter
    more expensive

  • HP ProLiant ML110 G7 Intel Xeon E3-1220 RAID 1 with hot swap configuration

    Dear All;
                     Am going to purchase 'HP ProLiant ML110 G7 Intel Xeon E3-1220' server partnumber '470065-591'. I want to know little more about its RAID controller. The above mensioned server having only two 500GB HDD. I want to configure RAID 1 on it and i want to add one more HDD 'HP 500GB 3G SATA 7.2K 3.5in MDL HDD' as hot swap for the RAID 1. here are my questions 
    1) it support RAID 1
        i checked on few blogs. then i confirm I can configure RAID 10 with two HDD. so it will work same as RAID 1.
    2) it will suport hot swap
    actually first time am going to install RAID. Thats why am asking these questions.

    Hi:
    I recommend you also post your question in the HP Business Support Forum -- ML Servers section.
    http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264
    Paul

  • Advice needed installing XP Pro onto RAID Mirror with XP Home on IDE already

    Hi Y'all,
    I have the rig described below.
    Currently, I'm running Win XP Home SP2 booting on the 80gig IDE drive, with another partition on it holding my files.
    I want to clean install XP Professional SP2 (slipstreamed) onto the 120gig SATA Mirror RAID array and use that as the boot drive. This is empty but has been formatted and partitioned so the system recognises it as a drive.
    Once that's done I want to wipe off XP Home and use the IDE drive as a pagefile and backup drive.
    I had thought of doing it this way:
    1. Prepare floppy with SATA RAID drivers v1.0.0.19 (Files: fasttx2k; txtsetup.oem; Fasttx2k.cat; fasttx2k.INF; fasttx2k.sys; README.TXT)
    2. Erase all partitions on the RAID mirror but leave both physical drives installed
    3. Remove the IDE drive
    4. Boot from Win XP Pro SP2 CD ROM and install the SATA drivers at the F6 prompt
    5. Continue WinXP install as normal onto the RAID drive
    6. Reconnect the IDE drive after OS has installed
    7. Select Win XP Pro as the OS to boot
    8. After bootup erase Win XP Home partition
    9. Partition the RAID drive to have 2 partitions, one (C:) for the OS, the other (D:) for my files
    10. Use Files & Settings Transfer Wizard to repopulate the OS with my stuff (previously exported to a safe place).
    11. Get on with life...
    Can anyone please advise if they forsee any problems doing it this way.  
    Just to show that I am really confused, advice I've read in the Windows XP Forum says I should break the mirror before doing trying to install any OS to a RAID array and use just one of the physical 120gig SATA drives to install XP Pro onto. Once this has been done I should rebuild the mirror and the drives will automatically become mirrored once the data has been duplicated to the 2nd SATA.
    Is this the only way to do this? Is this the best way to do this (does WinXP install badly to a mirror RAID that has already been created)?  
    Advice I've already read on the forum here has only confused me further because:
    a) it assumes a level of knowledge that I don't seem to have
    b) it doesn't deal with my exact circumstances.  
    All help gratefully received.  

    An update on the situation.....
    I am trying to install Win XP Pro SP2 (slipstreamed) onto a RAID Mirror of 2 Hitachi Deskstar SATA drives on my MSI K7N2G-ILSR. This is the exact procedure I've followed:
    1. Formatted (both SATA drives) as drive I: using Windows Disk Management tool in WinXP (The mirror is seen by the BIOS & Fastrak BIOS)
    2. Started Win XP Pro install via CD in d:\
    3. Pressed F6 when requested
    4. Windows Setup loads normally
    5. Options to install 3rd party drivers for mass storage devices & other things appear
    6. Press S to start installing RAID drivers
    7. Insert floppy into A:\ & press Enter
    8. Select Promise Fastrak 376 Win XP driver
    9. Get following error message:
    File \WINXP\fasttx2k.sys caused an unexpected error (18) at line 2113 in d:\xpsprtm\base\boot\oemdisk.c.
    10. Press Enter to continue
    11. Setup doesn't recognise the SATA drive I: so it doesn't appear in the list of partitions on which to install XP Pro
    I've tried it every which way.
    The following with IDE1 HDD disconnected, i.e. no operating system installed:
    1 SATA drive only (mirror broken)
    1 SATA drive striped array
    Both SATA drives (mirror functional)
    The same with IDE1 HDD connected and starting Windows Setup from within XP Home...
    The only difference is if I use the original Win XP Pro disc (without SP2 slipstreamed) when the error message changes to:
    File \WINXP\fasttx2k.sys caused an unexpected error (18) at line 2108 in d:\xpsp1\base\boot\oemdisk.c.
    In a thread here there is mention of an error in a file but it isn't directly related to my mobo, so I am reluctant to fiddle with the file unless someone can explain clearly what needs changing. I'm just trying to find the thread at the moment.....
    This is the text contained within txtsetup.oem:
    [Disks]
    d1 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \
    d2 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \nt4
    d3 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \Win2000
    d4 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \WinXP
    [Defaults]
    scsi = FastTrak_TX2K_xp
    [scsi]
    FastTrak_TX2K_xp = "WinXP Promise FastTrak 376 (tm) Controller", fasttx2k
    FastTrak_TX2K_nt5 = "Win2000 Promise FastTrak 376 (tm) Controller", fasttx2k
    FastTrak_TX2K_nt4 = "WinNT Promise FastTrak 376 (tm) Controller", fasttx2k
    [Files.scsi.FastTrak_TX2K_xp]
    driver = d4, fasttx2k.sys, fasttx2k
    inf    = d4, fasttx2k.inf
    catalog= d4, fasttx2k.cat
    [HardwareIds.scsi.FastTrak_TX2K_xp]
    id="PCI\VEN_105A&DEV_3376", "fasttx2k"
    [Files.scsi.FastTrak_TX2K_nt5]
    driver = d3, fasttx2k.sys, fasttx2k
    inf    = d3, fasttx2k.inf
    catalog= d3, fasttx2k.cat
    [HardwareIds.scsi.FastTrak_TX2K_nt5]
    id="PCI\VEN_105A&DEV_3376", "fasttx2k"
    [Files.scsi.FastTrak_TX2K_nt4]
    driver = d2, fasttx2k.sys, fasttx2k
    inf    = d2, fasttx2k.inf
    [Config.fasttx2k]
    value = "", Tag, REG_DWORD, 1
    I've also tried the following:
    Change Boot sequence to CD-ROM> SCSI> HDD-0
    Delete txtsetup.oem from floppy - Setup then says it's missing
    Copied original drivers from nVidia driver & utility disk
    None of these things has made the slightest difference
    Need further help please!

  • RAID 5 with OS recovery another server different hardware

    Hi thanks in advance
    I have a serious problem, is this hope can help me or direccionarme
    We had a server with RAID May 4 full disks, raid hardware, in this arrangement the operating system, weblogic, oas, base data base software and data files, and others are included.
    The server was Red Hat 4 update 3 we know the distribution and mounting points.
    now the server is physically damage are only 4 disks, mount the arregloo quicimos another server but the hardware is different. We are at the point where we import the raid 5, and got on the new server but does not rise. we tested with a bootable linux from CD discs and can see but can not access the raid.
    Any idea that we can provide.
    Thank you.

    Hi,
    raid hardware
    It is like Dude said, and of course must have the same driver version.
    Best regards

  • G-RAID or G-SATA for PB?

    It’s time to buy an external HD to store and access my video projects and pictures.
    I am 90% stacked with G-Tech
    My question is: what exactly are the differences between G-Raid and G-SATA. Which one is better for video editing and for my PB G4 1.67?
    I also want to know if there is another way to connect to PB; faster and better than fireware.
    Your help is really appreciated.
    Thank you!

    There's a plus in the fact that you don't use up the Mac's FW bus with this SATA connection. But ya have that card involved. fast is better if it's reliable.
    There a negative though in that you can't a SATA array to just any old mac lyin' around. You could with the FW setup. SATA cards are cheap if you have the slots for 'em. I don't. I have SCSI still...
    I gotta say, the G-Tech folk are fixing any arrays that don't work right. They have their own public forum at the COW and the president of the company is one of the leaders. Their woes are public, but their standup guys IMHO.
    Jerry

  • Would my Mac Pro accept an internal HD with SATA 6Gb/s with 64MB Cache?

    I am looking to expand the storage on my Mac Pro and wanted to know if it would accept internal HD with SATA 6.0Gb/s, 7200RPM, 64MB Cache.  Also, do they accept 3 T Drives?

    I would point out that Apple never updates hardware specs on hard drives.
    That was the size available at the time.
    Doubt any real testing went into it.
    Almost no one buys hard drives from Apple unless:
    They are using Apple RAID controller and want to be sure; they use SAS; don't realize that for normal customers even workstations, SATA II/III are fine and there is nothing special, there are not Apple firmware models that you need other than Apple controller support.
    When the Mac Pro 2006 came out I think 750GB was the largest, and while other web pages get updated and tech notes reflect new information, that has not happenend to product spec pages. - And there are pages where the specs and hardware/software requirements are even off base, making matters even worse.
    Any drive that can fit as is or with an adapter (such as Icy Dock for SSDs) that has SATA interface.
    Guess that is too complicated??

Maybe you are looking for

  • SCCM 2012 SP1 - Offline Servicing failure - Failed to find or access the update binaries to be applied on the image

    Hi there Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing. I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I c

  • CSS - Visited Link format won't apply

    Hello, The following is a column that I have in a table, and its cells are all hyperlinks that trigger some AJAX.  The hyperlink works great.  However, I would like the background color to turn white after the link has been clicked.  It seems like th

  • Why does iCloud still show an old email address?

    When I log in to my apple ID and iCloud, the screen shows an old email address.  I have changed the email address long ago under "mange Apple ID".  Suggestions welcome.

  • C7 Battaery very hot when navigationg

    Hello, when I do navigating with my nokia c7 i gets very hot. Does anybody knows something about ? The Battery empties very fast then and is is very hot on the back side. What should I do?

  • Filesystem to asm migration

    I am running 10.2.0.3 on Oracle linux "OEL4" with ext3 filesystem. I just receive a brand new server and i want to move my actual database into it. I want to run my 10.2.0.3 database on asm 11g into my new server. Once asm testing is over, il migrate