RAID 5 with OS recovery another server different hardware

Hi thanks in advance
I have a serious problem, is this hope can help me or direccionarme
We had a server with RAID May 4 full disks, raid hardware, in this arrangement the operating system, weblogic, oas, base data base software and data files, and others are included.
The server was Red Hat 4 update 3 we know the distribution and mounting points.
now the server is physically damage are only 4 disks, mount the arregloo quicimos another server but the hardware is different. We are at the point where we import the raid 5, and got on the new server but does not rise. we tested with a bootable linux from CD discs and can see but can not access the raid.
Any idea that we can provide.
Thank you.

Hi,
raid hardware
It is like Dude said, and of course must have the same driver version.
Best regards

Similar Messages

Make websites with .Mac on another server (problem!)

Hello. I have some problems with iWeb. When I start iWeb it pops up a .Mac popup, I click close and the theme chooser should be there so I can start make a homepage with iWeb. But I can't click the plus sign, neither can I select "New page" or "New site" since they are unselectable in the menu. I have reinstalled iWeb but with no luck.
I have also repaired permissions.
Here are two screenshots of it:
http://i15.tinypic.com/4c27k39.png
http://i10.tinypic.com/4fw7vgz.png
Any suggestions?

Short of reinstalling again, try this...
1. Open up iWeb and leave it open.
2. Open up iPhoto
3. Select a few photos and then click on the iWeb button at the bottom of the window
4. Select "Photo Page" from the menu
If this works, iPhoto should send your selected photos to iWeb, which will then open up a new photo page for you. This action has been known to "reenable" iWeb's functioning.
Here's a page put up by Kabing on this topic...
http://homepage.mac.com/hoovmoss/iWebIsGrey.html

Install Solaris 8 with flash image cretaed on different hardware

Can I install Solaris 8 on v 480 with the help of flash image created from v 220 syatem.??
will it work?
Regards
Jai

Hi
It's a good a way as any considering your environment. What I've done in the past is get hold of around 4 or 8 firewire cables. If these are the newest iMacs then you'll be wanting firewire 800. Image two iMacs first. TDM another two to these two. Now you have 4. If you have another 4 cables repeat the procedure. Now you have 8. The longest time taken will be with the initial one or two iMacs. Thereafter once cascaded in this way with enough cables they can all be done at the same time.
The only problem I had - and you've mentioned it - is space and power outlets. Desk space is always a problem if they're not in situ.
You may want to read this:
http://manuals.info.apple.com/enUS/SystemImagev10.6.pdf
Something to consider for the future perhaps?
Judging by your Name is it safe for me to assume you've installed FCP? I guess the image is going to be quite large then? I imaged a suite of iMacs some time back with FCP, Adobe CS4 and Office. Total space taken was 110GB. Took 12-13 hours to image. I hope your image is not that large?
Tony

Error while duplicate database from one server to another server

Hi there,
I am practicing duplicate database from one single database server to another server. Hardware and driver path on 2 machines is the same. Here are my steps:
--------------------- Clone site:
1. modify listener.ora with content:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(SID_NAME= orcl)
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
2. stop and start listener again, message show like :
Service “orcl” has 1 instance(s).
Instance “orcl”, status UNKNOWN, has 1 handler(s) for this service…
The command completed successfully
3. create pfile from spfile.
4. shutdown and startup nomount with pfile is new pfile create from step 3.
--------------------------------------- Source site
1. modify tnsnames.ora with content like:
VVCOREDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = vvcoredb)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.254.1.235) (PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
2. run command from rman like these:
rman> connect target sys@vvcoredb
rman> target database Password:
rman> connect auxiliary sys@orcl
rman> auxiliary database Password:
rman> DUPLICATE TARGET DATABASE to orcl from active database spfile nofilenamecheck;
Then the result show below:
Starting Duplicate Db at 24-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
executing Memory Script
Starting backup at 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=74 device type=DISK
Finished backup at 24-SEP-12
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL'' comment=
''duplicate'' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/24/2012 17:44:12
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated
ORA-01262: Stat failed on a file destination directory
Linux-x86_64 Error: 2: No such file or directory
I don't know what wrong with my pfile? I specify correct my pfile on clone site like this:
orcl.__db_cache_size=1476395008
orcl.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=1342177280
orcl.__sga_target=1979711488
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=436207616
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area/vvcoredb'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.memory_target=3313500160
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
Please suggest me do i miss some steps when try to duplicate database?
Any suggestions are welcome.
Thanks in advance!
P/s: Sorry for my bad English.

Oh god, it worked. Thank you. But i got another problem like this:
duplicate target database to orcl from active database spfile set "db_recovery_file_dest" = "/u01/app/oracle/flash_recovery_area/vvcoredb" nofilenamecheck;
Starting Duplicate Db at 24-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
executing Memory Script
Starting backup at 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=74 device type=DISK
Finished backup at 24-SEP-12
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL'' comment=
''duplicate'' scope=spfile";
sql clone "alter system set db_recovery_file_dest =
''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment=
'''' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
sql statement: alter system set db_recovery_file_dest = ''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment= '''' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 3307048960 bytes
Fixed Size 2217872 bytes
Variable Size 1811941488 bytes
Database Buffers 1476395008 bytes
Redo Buffers 16494592 bytes
contents of Memory Script:
sql clone "alter system set db_name =
''VVCOREDB'' comment=
''Modified by RMAN duplicate'' scope=spfile";
sql clone "alter system set db_unique_name =
''ORCL'' comment=
''Modified by RMAN duplicate'' scope=spfile";
shutdown clone immediate;
startup clone force nomount
backup as copy current controlfile auxiliary format '/u01/app/oracle/oradata/vvcoredb/control01.ctl';
restore clone controlfile to '/u01/app/oracle/recovery_area/vvcoredb/control02.ctl' from
'/u01/app/oracle/oradata/vvcoredb/control01.ctl';
alter clone database mount;
executing Memory Script
sql statement: alter system set db_name = ''VVCOREDB'' comment= ''Modified by RMAN duplicate'' scope=spfile
sql statement: alter system set db_unique_name = ''ORCL'' comment= ''Modified by RMAN duplicate'' scope=spfile
Oracle instance shut down
Oracle instance started
Total System Global Area 3307048960 bytes
Fixed Size 2217872 bytes
Variable Size 1811941488 bytes
Database Buffers 1476395008 bytes
Redo Buffers 16494592 bytes
Starting backup at 24-SEP-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
copying current control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/24/2012 18:42:09
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/24/2012 18:42:09
ORA-17628: Oracle error 19505 returned by remote Oracle server
I have a comment that source site doesn't have flash_recovery_area, instead it's name is recovery_area, is it problem?
Edited by: 788420 on Sep 24, 2012 4:44 AM

Trying to restore a database with RMAN in new server

Hello,
Database: Oracle 10gR2
O/S: Windows Server 2003
My RMAN backuppieces are stored in a network drive:
\\old_location\FULL
and
\\old_location\INC
I'm trying to restore a whole database with RMAN in another server from my FULL backup.
For that, I copy all backuppieces files
from: \\old_location\FULL
to new server: D:\new_location\
Also I created the relevant folder hierarchy under <ORACLE_BASE> directory, as follows:
a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>\admin' directory
b. Create <DATABASE_NAME> directory under '<ORACLE_BASE>\oradata' directory
c. pfile.ora and controlfile (CTL_MTDPROD_2308_20120401_1.CTL) are backup from original database and they are in D:\new_location\
d. I copied pfile.ora and controlfile to folder: C:\oracle\product\10.2.0\db_1\database\
I started creating an instance in new server from scratch:
C:\>oradim -new -sid MTDPROD -intpwd mtdprod
C:\> SET ORACLE_SID=MTDPROD
C:\> rman
RMAN> connect target sys
RMAN> SET DBID=21692876873
RMAN> STARTUP force nomount PFILE=C:\oracle\product\10.2.0\db_1\database\init_mtdprod.ora
RMAN> restore controlfile from 'C:\oracle\product\10.2.0\db_1\database\CTL_MTDPROD_2308_20120401_1.CTL';
RMAN> alter database mount;
#Since I want to read my backuppieces from D:\new_location and not from \\old_location\FULL then I catalog and restore like:
RMAN> catalog start with 'D:\new_location\';
RMAN> restore database;
Starting recover at 25/04/12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=541 devtype=DISK
channel ORA_DISK_1: starting incremental datafile backupset restore
channel ORA_DISK_1: specifying datafile copies to recover
recovering datafile copy fno=00003 name=D:\BD_MTDPROD\CONTROLFILES\SYSAUX01.DBF
recovering datafile copy fno=00004 name=D:\BD_MTDPROD\CONTROLFILES\USERS01.DBF
recovering datafile copy fno=00007 name=D:\BD_MTDPROD\DATAFILES_DATA\MSE.ORA
recovering datafile copy fno=00010 name=D:\BD_MTDPROD\DATAFILES_DATA\EXPEDIENTES2.ORA
channel ORA_DISK_1: reading from backup piece \\old_location\FULL\FULL_MTDPROD_20120401_2304_1.BAK
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: failover to piece handle=D:\new_location\FULL\FULL_MTDPROD_20120401_2304_1.BAK tag=TAG20120401T190004
.....(continues)
Questions:
1. RMAN still reads from old_location. The only way to avoid that would be deleting all files from \\old_location\FULL ?
2. The message "failover to piece handle=D:\new_location\...." indicates that that file is not usefull? I just copy them from old_location to new_location... how can they get useless?
I suspect there is something in controlfile that redirects to \\old_location\FULL\ and doesn't let to read from D:\new_location\
Please, advice.

user521219 wrote:
Questions:
1. RMAN still reads from old_location. The only way to avoid that would be deleting all files from \\old_location\FULL ?
2. The message "failover to piece handle=D:\new_location\...." indicates that that file is not usefull? I just copy them from old_location to new_location... how can they get useless?
I suspect there is something in controlfile that redirects to \\old_location\FULL\ and doesn't let to read from D:\new_location\Is this a cold backup? Did you change the location of control file in your PFILE or is it still pointing to old location?
You may want to check the output of RESTORE DATABASE PREVIEW command, which will just report which backup files it uses without actually restoring thhe DB.

Restore database noarchivelog to another server in ASM

I have to migrate a database 10g with noarchivelog with filesystem to another server with ASM.
Could you help me to do it?
Thanks.

ok, I put the database in archivelog but I don`t understando the link "http://www.oracleflash.com/10/How-to-migrate-Oracle-datafiles-to-ASM-storage-via-RMAN.html".
First, I have moved the database to the new server, now I have the database with filesystem but in the final server with archivelog. OK.
The steps are:
first, I have to modify the parameters of db_create_file_dest, etc, to +ASM.
I hve to shutdown the database, open nomount, restore controlfile and backup as copy.
Is it correct?,
one question, the restore controlfile, I suppose that I have to have a previous backup with filesystem of controlfile?
Thanks.

Xserve and xserve raid works with iOS 10.9

xserve and xserve raid works with iOS 10.9

For the Xserve hardware:
OS X Mavericks: System Requirements
The Xserve RAID is known as a DAS (directly attached storage) device and provided the HBA card you're planning to use is fully supported in whatever server platform you've chosen (Apple, Microsoft etc) it will be work regardless of OS version.

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Having a problem with the photos showing up after moving everything to another server.

Greetings,
I used an older version of iWeb to create several websites a few years back, and would like to retain them. I followed the instructions and downloaded the five folders for the five websites on my iDisk, which took more than two hours, and then uploaded them to the server I use to host another of my websites, and made them all subdomains.
The first issue I had was a php code error for every page. Turns out I had to remove the very first part of the index.html file: <?xml version="1.0" encoding="UTF-8"?> and then everything seemed fine until I tried to go to another page. Ended up having to do this on every html page for each website.
Then I noticed that none of the pictures were showing up in the albums. I also have videos on two of the sites, and they worked fine. I checked /Photo_Albums/Pages, and inside were the folders with all the pictures, so I know they're there.
I have ruled out it having anything to do with my new server by opening the websites in Safari from their folders on my desktop, and had the same results; everything was good except there were no pictures on the page.
If anyone can help me with this I would really appreciate it! I've got 5 websites I have to get fixed in two days.
Thanks!
Take care,
~Chris

Thanks Roddy, but I don't think that's it, either. When I downloaded everything from my iDisk, it automatically created 3 versions of every picture, and named them either micro.jpg, thumb.jpg, or web.jpg. They can be found in the Photo_files>Media folder, each set of three in their own uniquely numbered folder. For example, one the websites is of a friend of mines hot rod Fiero.
Here is his website via iWeb:
http://jimsfiero.com/
This is what it looks like after uploading everything to a different server:
http://jimsfiero.ricehatersclub.com/
Here's my personal website:
http://peckerwoodspitstop.com/
And here it is after uploading everything:
http://peckerwoodspitstop.ricehatersclub.com/
You can see that everything works, except where the page is a photo album.
Thoughts?
Oh, BTW, I tried Wyodor's suggestion, and it shut everything down with a 500 Internal Server Error. Removing the suggested file corrected everything.

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

Can You Build a Website with iWeb and then publish it to another server?

I am very new at this but like how easy iWeb makes it to build a website. A few questions for the newbie:
1. I want to build a site but have another server I use who would host it. After watching the iWeb tutorials it looks as if you have to publish it on mobileme.com. But I already have hosting with another company. How do you do that?
2. I also have a domain name I want to show up in the hyperlink bar not mobileme.com/____, is that possible to do with this program?
3. Are their other templates for iWeb? I see about 12 or so they offer, can you search and download for new ones or is what's there all you have to choose from?
I appreciate any help on these matters.
Thanks!

HilaryRusso wrote:
1. After watching the iWeb tutorials it looks as if you have to publish it on mobileme.com.
Hilary ~ Did you not watch till the end of this iWeb tutorial?...
http://www.apple.com/ilife/tutorials/#iweb-design-52
2. I also have a domain name I want to show up in the hyperlink bar not mobileme.com/____, is that possible to do with this program?
See this article:
http://iwebfaq.org/site/iWeb_Domains.html
3. Are their other templates for iWeb? I see about 12 or so they offer, can you search and download for new ones or is what's there all you have to choose from?
Yes, you can search — but let me Google that for you; click here.

I have upgraded to OS X mavericks and there is now a problem with my email. I have discovered several emails no longer contain the original message instead another completely different message is appearing but under the name of original sender. Any ideas?

I have upgraded to OS X mavericks and there is now a problem with my email. I have discovered several emails no longer contain the original message instead another completely different message is appearing but under the name of original sender. Any ideas?

With the account mailbox selected, Mailbox menu, Rebuild.

Query for UDT over different Databases on another Server

Hi,
i want to use via query an UDT from another Database on another Server...
nomal Tables can be Used like this:
select* from [SVR-Name].Database.dbo.OITM
But if I try the same for an UDT:
select* from [SVR-Name].Database.dbo.[@UDT]
it doesn't work.
Does anyone have an Idea for me ?
Thx.
Markus

Thx for your replies,
a query over different Databases on the same SQL-Server is no problem.
... but I want to select an UDT which is on another SAP-Server (other location) in a different Database.
Servername = SVR
Database = LIVE
UDT = [@portfolio]
select * from [SVR].LIVE.DBO.[@portfolio]
doesn't work.
(normal query to reach OITM for example:
select * from [SVR].LIVE.DBO.OITM
works fine !!

Replacing Exchange 2007 with another server with new server name

I am working with a client to move Exchange from the server it is on now to another server. This will be new hardware and new name. The current server Exchange is on will still exist by I want to move Exchange completely off of that server.
Current Network Setup:
Server 1: 1 SBS 2003 server is Domain Controller, Runs AD, DNS, DHCP, File Sharing, SharePoint 2003 and Remote Desktop
Server 2: Server 2008 running Exchange 2007, Backup Domain Controller, File Sharing, SharePoint 2007, Terminal Services.
Current Plan:
Introduce Server 3 to run just Exchange 2007. I would like to completely over a short period of time move exchange from Server 2 to Server 3. I have searched over the internet and found several articles but still have a few questions. There are roughly 75
mailboxes with 50 actual users. Some users are using Outlook 2003 that came with the SBS 2003 and others are using Later versions of office. Server 3 will be a Server 2008 R2 system.
1. What is the best method to perform this transfer. I found article TechNet
Article that explains with 2 remote offices how to do this but not sure if the same will apply.
2. Since I am not immediately decommissioning Server 2 how can I safely remove all the roles and add them to Server 3?
3. For the end user impact. Will the change make Outlook automatically pickup the new server name or will each user need to reconfigure their outlook profiles?
4. I will be moving OWA since there are several Remote and Terminal Service users that use OWA for email. I would like to keep the same certificate and domain name setup if possible.

Hi,
According to your description, I recommend you install another exchange 2007 on server 3, the exchange server role as the same as server 2.
And then, transfer all mailboxes and configurations(OWA,DNS..) from server 2 to server 3.
Finally, decommission the server 2 .
Thanks.
Niko Cheng
TechNet Community Support

Problems with FMS accessing files on another server

Hi Guys
Im currently working on a small project with streaming video on demand and using FMS 4.0 (and a complete noob in FMS).
The video’s is located on another server than the FMS. But I have mapped the server to a drive on my FMS server,
\\192.168.1.10\data\media\mov\ => R:
And in the fms.ini file change vod_dir = R:\
The FMS service is logging on as Administrator, but I still can’t play the videos.
If I change vod_dir to a local folder ( c:\data\media\mov\ ) on my FMS server it play the movie fine, any idea why this doesn’t work?
FYI: I'm using rtmp and both servers is running win2008 R2
Any input is greatly appreciated
Best reagrds
Shimshim

Hi Nikhil
I ran the test on my two laptops (xp and win 7, instead of the win 2008 servers ), with lesser restrictions.
When I used the UNC path in the fms.ini it worked fine, but not when I used the mapped drive.
This proves it s security setting on my servers, that’s coursing the problem.
Thank you for your help and fast replies J
Best regards
Shimshim

RAID 5 with OS recovery another server different hardware

Similar Messages

Maybe you are looking for