RAID Admin logs problem -- how to avoid 2-day truncation?
Folks:
I have a problem that appears to have started about April 5 when I updated RAID Admin and Xerve RAID firmware to latest versions. Since then, I'm only seeing last two days of entries in the log (ie: what you see in the "Events" tab in RAID Admin). Strangely, entries up to to April 5 are preserved.
Of course I did't notice this until some was already lost. But now I want to fix it. I don't see any setting for "max log length" or similar.
Further more, I could use an explanation of where this log lives -- is it something that RAID Admin retrieves from the RAID box, or is it somehow preserved on the computer running RAID Admin or what?
Thanks,
Graham
Simply? There is no simple way.
But if you will accept a way that is not so simple, there is a company that sells a product that allows you to run a Java class as a service under NT. I don't remember its name but it has been named several times in the past in answers to this same question. A search of the forums would probably find it.
Similar Messages
-
CRS 5 Supervisor,Admin logging problem
Good day.
Today i've created CSQ and new agents for customer.
CAD launch on the first agent was fine,it asked me upgrade version of CAD,upgrade took few seconds,after that on the second Agent's PC i faced with logging issue.
See attachment.
I see this error message on CAD,Supervisor and Admin launch.
What can it be?
Thanks.hello!
just to understand more, the problem appears when you try to upgrade the CAD, CDA and the CSD from the PC? am i correct?
if so, then the issue is related to a communication failure (Proxy config most prbably) between the agent and the UCCX, to workaround this problem (try at first with one of the agents, and then run it on all)
1- uninstall the CAD
2- download the exe file from the UCCX server. you can download it by sharing the following file:
C:\Program Files\wfavvid\tomcat_appadmin\webapps\TUP\CAD
3- copy the CAD installer (cant remember the name of the folder,sorry) from there to the agent's PC, and then install it
hope this solves your problem
Zaid -
RAID Admin Parity verification test: How to use?
Folks:
My basic question: How to get "Parity validation" test to tell you something useful.
XServe RAID, dual 7x250, RAID Admin 1.5.1 and firmware updated 2 weeks ago.
After rebuilding a RAID array, I ran the RAID Admin's Parity verification test (which I assume probably just runs a test built into the firmware?).
My expectation: That this test would
a) change nothing,
b) report details on any problems.
What I got when it finished was this in the log:
Lower Controller 04/23/07 01:22:35 Data Was Lost During A Rebuild Operation
Lower Controller 04/23/07 01:22:35 Data Was Lost During A Rebuild Operation
Lower Controller 04/23/07 01:22:35 RAID Set 1 Verify Complete (-200001)
Lower Controller 04/23/07 00:14:13 RAID Set 1 Verify Started
What the heck?
a) I didn't ask for a rebuild operation.
b) How do I determine the extent of validation failure (maybe this is what "data was lost" refers to?)?
Graham
Many Mac OS X (10.3.9) Many
Many Mac OS X (10.3.9) ManyFolks:
My basic question: How to get "Parity validation" test to tell you something useful.
XServe RAID, dual 7x250, RAID Admin 1.5.1 and firmware updated 2 weeks ago.
After rebuilding a RAID array, I ran the RAID Admin's Parity verification test (which I assume probably just runs a test built into the firmware?).
My expectation: That this test would
a) change nothing,
b) report details on any problems.
What I got when it finished was this in the log:
Lower Controller 04/23/07 01:22:35 Data Was Lost During A Rebuild Operation
Lower Controller 04/23/07 01:22:35 Data Was Lost During A Rebuild Operation
Lower Controller 04/23/07 01:22:35 RAID Set 1 Verify Complete (-200001)
Lower Controller 04/23/07 00:14:13 RAID Set 1 Verify Started
What the heck?
a) I didn't ask for a rebuild operation.
b) How do I determine the extent of validation failure (maybe this is what "data was lost" refers to?)?
Graham
Many Mac OS X (10.3.9) Many
Many Mac OS X (10.3.9) Many -
How to set up email in RAID Admin?
Using RAID Admin 1.5.1, I need to know how to set up the it up for automatic email notification. Okay I got as far as clicking the Email icon adding my .mac address. Now what do I put under SMTP. It's asking for the "server" and the "from email address". Our company uses a Microsoft Exchange server whether or not that means anything. And what is up with the check box for SMTP Server Authentication?
Thanks for any input. I appreciate it!
jeffreyThanks Donald for answering my question. I found the IP Address of our exchange server and I plugged that into the server field. And I plugged my own company email address into the "From Email Address" field. That didn't do it, so I plugged in my network username and password into the authentication fields. I clicked "Send Test Email" again. Still didn't work. But here is the key in case anyone else has problems. At least in my case, I had to click the "OK" button to verify my settings. Once verified, I went back into the email settings and clicked "Send Test Email" again. Voila! A test email ended into my .mac email account right onto my iPhone within 1 minute. I think this is so cool. I can be away from the office (whether I be skiing or golfing) and be notified instantly if one of the components start to fail on our Xserve RAID system. Awesome!!!!!!!
-
How to avoid synchronization problem in a JSP webpage
HI,
In my web page im facing a problem like if two user are workin, by that time one's page is getting reflected in other's page.
Can anyone tell me how to avoid this synchronization problem?
Thanx a lotHi Rajesh,
we Have Configured LDAP tree Successfully....the Problem is the Role Assignment iview under Portal Admin is not appearing....if we check the Test Connection with the users Configured with LDAP in Authentication server TAB under user configuration,it is showing success message...but at the same time we are unable to login with the same user in to the Portal..we are working with EP 5.0....any help can be appreciated
Regards
Sudhir -
How to avoid sleepycat.je.log.ChecksumException
Hello,
We're building one on-line game application, and are evaluating JE. We want to use JE as a persistent store (very similar to a cache, periodically sync each on-line user's data to a remote JE server via network socket). We're testing with thousands of on-line users, and the data size for each user is about 83 KB.
I ran into one EnvironmentFailureException exception while doing anomaly testing. I used "kill -TERM pid" to kill the JVM process, and encountered the following exception. I had to clean all the JE log files in order to re-start JE. I'm wondering:
1. Is there anything wrong with my approach of anomaly testing? How to avoid the exception if I want to continue my anomaly testing?
2. Once the exception happens, are there any ways of "rescuing" the existing data? Because I had to clean all the JE log files in order to re-start JE.
The error message is as follows:
<daemonthread name="Cleaner-1"></daemonthread> caught exception: com.sleepycat.je.EnvironmentFailureException: (JE 4.1.6)DBServ (1):dbhome com.sleepycat.je.log.ChecksumExcep Read invalid log entry type: 0 LOG_CHECKSUM: Checksum invalid on read, log is likely invalid. Environment is invalid and must be closed. fetchTarget of 0x8a/0x59aaac parent IN=59 IN class=com.sleepycat.je.tree.BIN lastFullVersion=0xa4/0x7d1362 parent.getDirty()=true state=0
com.sleepycat.je.EnvironmentFailureException: (JE 4.1.6)DBServ(1):dbhome leepycat.je.log.ChecksumException: Read invalid log entry type: 0 LOG_CHECKSUM: Checksum invalid on read, log is likely invalid. Environment is invalid and must be closed. fetchTarget of 0x8a/0x59aaac parent IN=59 IN class=com.sleepycat.je.tree.BIN lastFullVersion=0xa4/0x7d1362 parent.getDirty()=true state=0
at com.sleepycat.je.log.LogManager.getLogEntry(LogManager.java:784)
at com.sleepycat.je.log.LogManager.getLogEntryAllowInvisibleAtRecovery(LogManager.java:742)
at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1315)
at com.sleepycat.je.tree.BIN.fetchTarget(BIN.java:1367)
at com.sleepycat.je.tree.Tree.getParentBINForChildLN(Tree.java:1017)
at com.sleepycat.je.cleaner.FileProcessor.processLN(FileProcessor.java:678)
at com.sleepycat.je.cleaner.FileProcessor.processFile(FileProcessor.java:553)
at com.sleepycat.je.cleaner.FileProcessor.doClean(FileProcessor.java:241)
at com.sleepycat.je.cleaner.FileProcessor.onWakeup(FileProcessor.java:143)
at com.sleepycat.je.utilint.DaemonThread.run(DaemonThread.java:162)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sleepycat.je.log.ChecksumException: Read invalid log entry type: 0
at com.sleepycat.je.log.LogEntryHeader.<init></init>(LogEntryHeader.java:138)
at com.sleepycat.je.log.LogManager.getLogEntryFromLogSource(LogManager.java:861)
at com.sleepycat.je.log.LogManager.getLogEntry(LogManager.java:781)
Thanks,
LeeuanDo you still have the offending log files? If so, save them away.
With a fresh environment, are you able to reliably reproduce this? i.e. if you kill -9 on a running system, can you reproduce the same problem?
Charles Lamb -
I'm seeing some strange behavior with our RAID Admin event log. On Friday, I did a rebuild of our one of our RAIDs and, in the event log, there was an entry added that said "RAID Rebuild Started" or something along those lines.
Today I opened RAID Admin and that event entry was gone. All of the other events around it were still there (removing and reinserting a drive, etc.), but not the actual rebuild message (or the subsequent success message).
Is this normal behavior?Yes, that is normal behavior. If there were any problems with the rebuild, you would see error messages in the event log, but the message about starting the rebuild does disappear after the rebuild finishes.
-Phoenix -
== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersMark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders -
How can avoid the problem of Parameter Prompting when I submitting ?
I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
1. using System;
2. using System.Collections;
3. using System.Configuration;
4. using System.Data;
5. using System.Linq;
6. using System.Web;
7. using System.Web.Security;
8. using System.Web.UI;
9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22. CrystalReportViewer crViewer = new CrystalReportViewer();
23. //CrystalReportSource crsource = new CrystalReportSource();
24. int nItemId;
25.
26. protected void Page_Load(object sender, EventArgs e)
27. {
28. //Database Connection
29. ConnectionInfo ConnInfo = new ConnectionInfo();
30. {
31. ConnInfo.ServerName = "127.0.0.1";
32. ConnInfo.DatabaseName = "Xcodf";
33. ConnInfo.UserID = "HR777";
34. ConnInfo.Password = "zghshshs";
35. }
36. // For Each Logon parameters
37. foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38. {
39. cnInfo.ConnectionInfo = ConnInfo;
40.
41. }
42.
43.
44.
45.
46.
47.
48. //Declaring varibles
49. nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50. //string strStartDate = Request.QueryString.Get("StartDate");
51. //int nItemId = 20;
52. string strStartDate = "23-JUL-2010";
53.
54. // object declration
55. CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56. CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59. TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61. // new report document object
62. ReportDocument oRpt = new ReportDocument();
63.
64. // loading the ItemReport in report document
65. oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67. // getting the database, the table and the LogOnInfo object which holds login onformation
68. crDatabase = oRpt.Database;
69.
70. // getting the table in an object array of one item
71. object[] arrTables = new object[1];
72. crDatabase.Tables.CopyTo(arrTables, 0);
73.
74. // assigning the first item of array to crTable by downcasting the object to Table
75. crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77. dbConn = crTable.LogOnInfo;
78.
79. // setting values
80. dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81. dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82. dbConn.ConnectionInfo.UserID = "HR777";
83. dbConn.ConnectionInfo.Password = "zghshshs";
84.
85. // applying login info to the table object
86. crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93. crViewer.RefreshReport();
94.
95. // defining report source
96. crViewer.ReportSource = oRpt;
97. //CrystalReportSource1.Report = oRpt;
98.
99. // so uptill now we have created everything
100. // what remains is to pass parameters to our report, so it
101. // shows only selected records. so calling a method to set
102. // those parameters.
103. setReportParameters();
104. }
105.
106. private void setReportParameters()
107. {
108.
109. // all the parameter fields will be added to this collection
110. ParameterFields paramFields = new ParameterFields();
111. //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112. //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114. // the parameter fields to be sent to the report
115. ParameterField pfItemId = new ParameterField();
116. //ParameterField pfStartDate = new ParameterField();
117. //ParameterField pfEndDate = new ParameterField();
118.
119. // setting the name of parameter fields with wich they will be recieved in report
120.
121. pfItemId.ParameterFieldName = "RegionID";
122.
123. //pfStartDate.ParameterFieldName = "StartDate";
124. //pfEndDate.ParameterFieldName = "EndDate";
125.
126. // the above declared parameter fields accept values as discrete objects
127. // so declaring discrete objects
128. ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129. //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130. //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132. // setting the values of discrete objects
133.
134.
135. dcItemId.Value = nItemId;
136.
137. //dcStartDate.Value = DateTime.Parse(strStartDate);
138. //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140. // now adding these discrete values to parameters
141. //paramField.HasCurrentValue = true;
142.
143.
144.
145. //pfItemId.CurrentValues.Clear();
146. int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147. pfItemId.Name = valueIDD.ToString();
148.
149. pfItemId.CurrentValues.Add(dcItemId);
150. //ParaLocation.ApplyCurrentValues;
151. pfItemId.HasCurrentValue = true;
152.
153. //pfStartDate.CurrentValues.Add(dcStartDate);
154. //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156. // now adding all these parameter fields to the parameter collection
157. paramFields.Add(pfItemId);
158.
159. //paramFields.Add(pfStartDate);
160. //paramFields.Add(pfEndDate);
161. /////////////////////
162. //Formula from Crystal
163. //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164. crViewer.RefreshReport();
165. // finally add the parameter collection to the crystal report viewer
166. crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170. }
171. }Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
How to avoid performance problems in PL/SQL?
How to avoid performance problems in PL/SQL?
As per my knowledge, below some points to avoid performance proble in PL/SQL.
Is there other point to avoid performance problems?
1. Use FORALL instead of FOR, and use BULK COLLECT to avoid looping many times.
2. EXECUTE IMMEDIATE is faster than DBMS_SQL
3. Use NOCOPY for OUT and IN OUT if the original value need not be retained. Overhead of keeping a copy of OUT is avoided.Susil Kumar Nagarajan wrote:
1. Group no of functions or procedures into a PACKAGEPutting related functions and procedures into packages is useful from a code organization standpoint. It has nothing whatsoever to do with performance.
2. Good to use collections in place of cursors that do DML operations on large set of recordsBut using SQL is more efficient than using PL/SQL with bulk collects.
4. Optimize SQL statements if they need to
-> Avoid using IN, NOT IN conditions or those cause full table scans in queriesThat is not true.
-> See to queries they use Indexes properly , sometimes Leading index column is missed out that cause performance overheadAssuming "properly" implies that it is entirely possible that a table scan is more efficient than using an index.
5. use Oracle HINTS if query can't be further tuned and hints can considerably help youHints should be used only as a last resort. It is almost certainly the case that if you can use a hint that forces a particular plan to improve performance that there is some problem in the underlying statistics that should be fixed in order to resolve issues with many queries rather than just the one you're looking at.
Justin -
WLC from 7.0.116 to 7.4.100 How to avoid H-Reap Problems
Dear All,
I would like to know how to avoid the Cisco H-Reap Problem when upgrade directly, and if it occurs 100% in the upgrade.
7.0.98.0 or later 7.0 releases
You can upgrade directly to 7.4.100.0
Note If you have VLAN support and VLAN mappings defined on H-REAP access points and are currently using a 7.0.x controller software release that is prior to 7.0.240.0, we recommend that you upgrade to the 7.0.240.0 release and then upgrade to 7.4.100.0 to avoid losing those VLAN settings.
Know better workaorund would be other options.
Thanks!
VíctorHello,
As per your query i can suggest you the following solution-
You can upgrade to 7.4.100.0 and use flex-connect to resolve the problem. Previously it was known as h-reap.
For more information please refer to the link-
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html
Hope this will help you. -
Tip: How to Avoid some tough LV 2009 Build & Run Problems
Hello,
I posted some tips I think may be useful to my fellow LabView 2009 programmers on the MathScript forum here:
http://forums.ni.com/t5/LabVIEW-MathScript-RT-Module/Avoid-MathScipt-Comments-in-EXE-Build-amp-Run-P...
Allthough some of the problems are MathScript related, the post contains information on how to avoid some other LabView 2009 problems as well. I thought this info would be interesting to other than "MathScript programmers":
The post contains information on how to circumvent the following problems:
* "The VI is not Executable. The full development version of LabView is required to fix the errors"
* Avoid that MathScript Comments are included in the EXE !
* Mathscript BUG: The Application Builder Includes ALL MathScript Comments in the EXE
* DSC Reference Problem in LabView 2010 DS1 release
* TagSrv Error "TagSrv.exe: This application has requested the runtime to terminate in an unusual way"
Geir OveHello,
I posted some tips I think may be useful to my fellow LabView 2009 programmers on the MathScript forum here:
http://forums.ni.com/t5/LabVIEW-MathScript-RT-Module/Avoid-MathScipt-Comments-in-EXE-Build-amp-Run-P...
Allthough some of the problems are MathScript related, the post contains information on how to avoid some other LabView 2009 problems as well. I thought this info would be interesting to other than "MathScript programmers":
The post contains information on how to circumvent the following problems:
* "The VI is not Executable. The full development version of LabView is required to fix the errors"
* Avoid that MathScript Comments are included in the EXE !
* Mathscript BUG: The Application Builder Includes ALL MathScript Comments in the EXE
* DSC Reference Problem in LabView 2010 DS1 release
* TagSrv Error "TagSrv.exe: This application has requested the runtime to terminate in an unusual way"
Geir Ove -
New document: How to avoid known PDF email attachment problems
Have you ever had problems with PDF attachments sent from Adobe Reader for iOS using Share > E-mail Document?
You may find this document useful to avoid the problems.
How to avoid known PDF email attachment problems
Please let us know if you have encountered different types of problems with PDF attachments. We can look for solutions or workarounds for you.Unfortunately, we (Adobe Reader mobile team) do not know if/when Apple will fix the attachment problems (software defects) in Apple Mail.
In particular, the attachment problem with Microsoft Outlook (See Problem #2 in How to avoid known PDF email attachment problems) appears to be a long-standing defect that has been known for years. However, Apple has not provided any fix for Apple Mail yet.
Adobe Reader for iOS merely launches Apple Mail (the default mail app on iOS) to send a PDF document as an attachment. Adobe Reader has no control over whether or not to embed a preview image of an attachment in the body of an email message, which is known to cause the problem with Microsoft Outlook (on the receiving side). The same problem happens when you send a single-page PDF document as an attachment along with an email signature from Apple iBooks on iOS.
For now, all iPad/iPhone users can do is to avoid the problems by using the workarounds that are described in How to avoid known PDF email attachment problems.
When new and different problems with PDF attachments are reported by Adobe Reader for iOS users, we will update the document above.
Sorry for the inconvenience. -
How to avoid flash player out of memory problems
hi all,
when i am running my swf file i am getting the message saying
that " flash script causes flash player run slowly do u want abort
script ". even it's not the problem of infinite loop.in that i am
passing huge data.
please help me how to avoid this situation.It is not apparent from your posting, but if you are parsing
large amounts
of XML data you could be faced with this issue if not just a
general
performance issue.
Solution is look at how to consume the data in smaller
pieces. In other
words only download the needed data to deal with the
immediate needs of the
Flash movie and based on user interaction load additional
data. A possible
drawback is where user interaction required the data
instantly such as
rollovers for large numbers of objects.
Another solution is look at streamlining the data such as
reducing nested
levels in XML.
Finally you may have an infinite loop that depends on the
data. With test
data the code runs fine, however certain values trigger an
indefinite loop.
I am working with a few large corporate clients and the
mentality of dumping
data in large vats to the client does not take into
consideration the
technology and performance. It should be the other way round
-- know the
capacity of the technology which is the Flash player.
Lon Hosford
www.lonhosford.com
Flash, Actionscript and Flash Media Server examples:
http://flashexamples.hosfordusa.com
May many happy bits flow your way!
"kalyanchakri" <[email protected]> wrote in
message
news:ed42oe$l6j$[email protected]..
> hi all,
>
> when i am running my swf file i am getting the message
saying that " flash
> script causes flash player run slowly do u want abort
script ". even it's
> not
> the problem of infinite loop.in that i am passing huge
data.
> please help me how to avoid this situation.
>
> -
How to map LUN via Raid Admin?
i want to map a LUN used by a ESXi 5 server to another 2 ESXi servers but I could not find option for it on Raid Admin 1.5.1
It's been a while, but I seem to recall that LUN masking was removed in version 1.5.1 for unknown reasons.
If you can roll back to (I think) RAID Admin 1.5.0 you have the option to use LUN masking, but 1.5.1 doesn't have it.
Maybe you are looking for
-
What do I have to do to stop fb crashing on ios7 ipad
Ever since the ios7 update, Facebook app just seems to be getting worse when it comes to how often it crashes. It also takes longer than it did to load photos and other things. I looked online at the Facebook reviews in the App Store and a LOT of oth
-
PPR on Show detail Item is not working
Hi Team, I want to completely show / hide the show detail Item based on selection in other showDetailItem . I have used the ppr to achieve this functionality. But its not working. Any suggestions please.
-
Hi. I am developing a iPhone app. For that i have successfully add the In App Purchase functionality. My problem is that it is working perfectly for a single item purchase. How can i do this for multiple item purchase with one purchase request to App
-
Dear Experts, First, sorry if I am writing in the wrong section. Please let me know the right place to post such a question. I am a young accountant in an old distribution company which is currently catching up on the modern methods. We are implement
-
New-SPWOPIBinding Failing with "The server did not respond"
I am currently attempting to create a binding between my SharePoint environment and our Office Web Apps server. I am able to connect to the Office Web Apps server when I allow HTTP connections (on both the Web Apps Server and the SharePoint server) a