RAID disk not detected by Windows XP

I have installed a single disk connected to the RAID controller on my K7T266 Pro2-R Mobo.
The RAID controller (that is enabled in BIOS) detects the disk, reports a correct size and reports it as "Functional". I have used the BIOS utility to assign an "Array" to the single disk drive.
I downloaded the latest drivers from this site and I have installed the drivers in Windows XP Pro (a number of times...) In the Device Manager, I get a "Windows XP Promise FastTrak100(tm) Controller(PDC20265)" under the "SCSI and RAID controllers" folder. The driver seems to work (at least the Device Manager claims "This device is working properly.")
The disk itself does not show up under the "Disk drives" folder in the Device Manager. The "Disk Management" in Windows XP also treats the disk as non-existent.
When I tried to install the "FastCheck Monitoring Utility", I got error messages "Service Install - Unknown Error". When trying to run the utility, it says "FastTrak controller or driver not found".
The event log says nothing of interrest.
I use the FastTrak PCI version in another system running Windows 2003 Server and there everything works OK. But that driver is almost a year newer...
What's wrong? Has anybody got the on-board FastTrak controler to work in WinXP? Any hints on what to do to make it work?

I just happened ( ) to have a second identical disk drive laying around (Christmas time you know...) so I installed it in the system. If the driver has any "single disk restrictions", it should work now - shouldn't it?
The BIOS RAID setup happilly discovered the new disk and I configured the two disks as a stripe set.
Windows XP? Nothing. The disks simply doesn't exist. There must be something wrong with the WinXP driver, but I can't figure out what. I've scanned the Internet and there seems to be a number of people having the same problem, but I haven't found anyone that have a solution.
MSI? Promise? We have a problem here...

Similar Messages

Compaq CQ40-337TU hard disk not detected/#10008-replace hard

i bought a laptop compaq cq40 a past year(2009). now i.m using window 7 enterprise.. the problem is my hard disk not detected.. i have done the start-up test thrugh bios. everythg going fine.. when i.m trying to do check for primary hard disk 1, it show that #10008-replace hard disk 1. what the problem?? n how i wan to solve the problem without changing the new hdd, ofkos without buy new one!!! if any one can help me??

it only means you need to replace your hard drive.but if cant replace it then there are some ways to revive your hard drive but it doesn't mean it will last. you can search it on google revive hard drive.

IPod Touch, not detected in Windows or iTunes...

First of all, hello to everyone...
i want to say that i read a lot EVERYWHERE about my issue and still i couldnt find a solution...
the problem is easy, i have a 3rd gen ipod touch, OS 4.2.1 now fully working... but, it's not detected in windows or itunes, as simple as that, and as u all have read in lots of other posts...
my ipod is now working because i took it to an apple store and they charged it in a MAC and they had no problem at all. the MAC detected the ipod, with all its content and my ipod's name...
but when i took it home -this has been hapenning since maybe... 5 MONTHS!-, i plug it in my PC and nothing happens...
ok, first of all, my spec... win vista home premium 64 bits, last version of itunes...
i tried ALL the solutions provided in APPLE official support page, and nothing happens... that means:
1- completely uninstall itunes and then reinstalling it... i ALSO FORMATED my entire hard drive twice!!!!
2- tried all USB ports and even an entirely different PC and nothing happened
3- bought 3 different IPOD to USB cables and nothing happened
4- tried setting ipod to restore, that way itunes SOMETIMES detected the ipod but i coulnt restore because of different error codes, so i had to take it several times to apple store to "unblock" it...
the only way it works -detection and charge- is with MAC computers or dock systems such as an iHome my gf has thats the way im charging it now, but otherwise it wont work...
i would really appreciate any help, since idont know what else to do!!
thx in advance!!

HI I was having some other problems getting my itouch to restore because it was not being recognized in itunes and kept erroring out. Now it has finally restored after I updated all kinds of drivers and removed and reinstalled itunes and apple software a million times,(yes this is all after installing itunes 8.1 and paying for an itouch upgrade as well) Now itunes says it cannot do anything with the ipod because it is getting an invalid response from the device. So it won't put anything back on my itouch or even show that I have plugged it in. I emailed tech support, If I find anything out I'll let you know, will you do the same for me?

My Iphone 5 is not detected in window 8.1

My Iphone is not detected in windows 8.1, what is the reason?

Camera roll to pc, no portable device anymore

Connected usb driver is not detected in window 8.1

hey .....
HP 250 G3 notebook
connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version F.22 .... so plsss...fix this problem......

@jeet2113
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

IPod not detected by Windows or iTunes!!

I bought a new iPod Video days ago but it's not detected by Windows/iTunes!!
However, it worked when I connected my old ipod mini...
Any reply would be appreciated.

hi,
try the following article my friend...it will definitely resolve your problem..
http://docs.info.apple.com/article.html?artnum=302420
http://docs.info.apple.com/article.html?artnum=61711
Regards,
Sam

Lenovo z400 touch (hard disk not detected in boot)

Greetings And Salutations.Laptop Specification:Lenovo z400 touchWin8.1 SGL1TB hard disk I seem to have problem with my laptop not being able to boot operating system.Before all this occurred, I was casually browsing with chrome. Then I noticed a freeze as I was unable to move the mouse pointer, or even execute ctrl shift delete command. This happened after I acquired a blue screen. But it restarted fast into the lenovo white logo before I could make of the error code.Afte that, I was not able to boot into operating system I did bios setup but hard disk is not detected. Until now I am still stuck at not being able to boot my operating system due to hard disk not detected and not in boot menu option..Help anyone? (my probable guess is hardware malfunctioned?)

berayen wrote:
Greetings And Salutations.Laptop Specification:Lenovo z400 touchWin8.1 SGL1TB hard disk I seem to have problem with my laptop not being able to boot operating system.Before all this occurred, I was casually browsing with chrome. Then I noticed a freeze as I was unable to move the mouse pointer, or even execute ctrl shift delete command. This happened after I acquired a blue screen. But it restarted fast into the lenovo white logo before I could make of the error code.Afte that, I was not able to boot into operating system I did bios setup but hard disk is not detected. Until now I am still stuck at not being able to boot my operating system due to hard disk not detected and not in boot menu option..Help anyone? (my probable guess is hardware malfunctioned?) If the hdd is no longer detected in the bios then the possibility is that you have a crashed hdd and therefore need to replace it. Just to be sure, go to bios and set everything to default. Save and exit. See if you can now see the hdd in the bios.

Airplay not detected in windows 7 itunes.

Airplay not detected on windows itunes even after windows update. Security & windows firewall not an issue. Please assist in re-installing the airplay option in my windows 7 itunes.

I, too, have the same problem. I have read multiple posts, but nothing works. It all began with an iTunes update. Airplay, my ATV, home sharing, and Apple Remote all worked. Now, everything that is dependent on iTunes does not work.
They are all on the same network. I have checked it and changed it multiple times. My ATV retrieves photos from my Win 7 HP computer fine, but iTunes might as well not exist. The ATV won't see iTunes through home sharing. None of my AirPlay devices are recognized by iTunes. There isn't even the icon. Remote doesn't recognize the iTunes library either.
I have reinstalled iTunes several times. Shut down and restarted everything several times. On two occasions, it all worked for a short time, so I know it can work. But I can't replicate that, no matter what I do.
I have disabled Norton security (and updated it). No difference. I shouldn't have to remove it since it all worked before the iTunes update. That's why I believe it is an iTunes issue. It once worked. Everything else works.

HP pen drive v165w not detected in windows 7

HP pen drive v165w not detected in windows 7 after using for 4 months. plsee help

How old is the desktop? Versions of Windows XP before SP2 did not recognize usb mass storage devices such as the pen drive. Also, do the usb ports generally work? Have you tried all the usb ports on the desktop?

HP x720w 64GB Pen Driver Does not detect on Windows 7 Laptop

HP x720w 64GB Pen Driver Does not detect on Windows 7 Laptop. While it detects on my PC. Same OS. Pls advise.

I will have to wait until a Moderator inspects your image and makes it viewable.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP pen drive v165w not detected in windows XP

HP pen drive v165w not detected in windows XP, please help

How old is the desktop? Versions of Windows XP before SP2 did not recognize usb mass storage devices such as the pen drive. Also, do the usb ports generally work? Have you tried all the usb ports on the desktop?

Hard disk not detected during booting or also it does not show in boot menu.

hard disk not detected during booting or also it does not show in boot menu please tell

you may have a failed hard drive or bad cables, i would check first to see if the hard drive is powering on. if it doesn't try a different power connection, and if it still doesn't start spinning i would say that it is bad and get a new hard drive. If
it does start spinning and just isn't being recognized, try a different sata port if you have the option or a different sata cable all together.

Internal 3TB Cavier Green WD Hard Disk not detect on mac but detected on Windows (Parallels

I bought a 3TB Cavier Green Western Digital and I have a Astone external 3.5 case. I attached both of this together and hook up USB to my Mac mini. It seems like my Disk Utility doesn't detect my 3TB at all, at first I thought my hard drive has a problem. So I open up Windows 8 on my Mac running Parallels and try it, It works perfectly and detected on Windows via Parallels and apprently it also detected on my Dell Inspiron Laptop. So I don't know what happen to Mac, it seems like Mac OS X doesn't want to detect the 3TB at all. Is there anything I can do?

I can guarantee you that it work seamlessly on Windows with the same enclosure, Windows 8 running Paralles on my Mac and Windows 7 on Dell Inspiron showing me 2794.52GB. I am running Mountain Lion 10.8.2. I already check the System Profiler on my Mac where you click the System Report>USB. It can be detect, but not detail. I will try to run Terminal app in few days and will update you again. I emailed Western Digital. At the moment, this is what they ask me to do.
Please connect your drive onto a working computer with pure Windows environment and perform an "Extended Test" to test your drive for problems using Data Lifeguard Diagnostics for Windows. Kindly go to the link below if you need assistance:
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=940
Please provide us the screenshot of the test result so we may verify the cause of the issue.
The "Extended Test" is going to take me 53 hours.
Do you think the next update 10.8.3 will help me? Because I read about BootCamp able to support 3TB hard drive.

Hard disk not detected once, but now working?

Hi,
I'm Zak, a bit of techie when it comes to playing with software, or re-assembling computers and whatnot. Unfortunately I've got no clue about some other things.
A bit of quick history on my notebook: The fan has been making terrible noises the last few weeks. Initially I thought it was some dust so I got some duster. A lot of dust came out, so that can only be good, but the noises came back after a few days. After some searching I figured the other logical explanation was probably the hard drive going bad. I'm hesitant to send it back to HP because I use it for all my university work and it would really set me back a few weeks to not have it.
So, a few days ago, I booted up my notebook to a "hard drive not detected" - or very similar - message. There were a few options, for f1-f4, they were system information, and 3 different tests (I think). I ran the tests, each one came back fine, noting that there was no OS installed, or hard disk to boot from. I rebooted because I hadn't quite seen it boot up, and wanted to see if there were any other options. Turns out, it started up fine. I restarted once more and again, it did fine.
Next, I scrambled around, backing up all my data, getting together warranty info, installing the HP Support Assistant, etc. I ran all the tests from the Support Assistant and there were no problems detected. Since then I've just been hibernating the notebook when I stop using it, and I haven't encountered any unusual trouble. It all seems fine, but my warranty expires Dec 7th of this year. Is it safe for me to assume the "hard drive not detected" error was just a single misfire? I've read a lot of threads and FAQs on it and it doesn't sound like something that just happens once and goes away. On the other hand, I've never had to use a warranty so am unsure quite how the process works, and like I said, sending it anywhere would put me back in my work.
For the sake of a full post, I have an HP G62-367DX Notebook, running on Windows 7 64-bit OS, and as far as I know there were no changes made between the error and my prior boot. If there's any other information I can provide, just let me know.
Cheers, thank you very much for any assistance, and good day
This question was solved.
View Solution.

The tests from the Assistant are not as comprehensive or reliable as the full hard drive test in the BIOS....tap F10 as you power up, go in there and find the hard drive test. Run the long form test and see what is says. It is not unusual for hard drive issues to start as intermittent and gradually get more frequent. If your drive passes the long form test you can fairly safely assume it was a one-time gremlin of some sort, but it is still a real good idea to back up. I like the idea of the online backup services and I will name Carbonite only because it is well known and not as an endorsement. There are several more and an external drive is also a good idea.
You cannot put off a reboot forever; you are going to have to confront the issue at some point.

Presario CQ 71 - Built in Webcam not detected under Windows 7 Professional - No HP-101 device

I have a Compaq Presario CQ 71 EB400. On this notebook I run both Windows 7 Home Premium 64-bits and Windows 7 Professional 64-bits to compare behaviour of apps and windows features in both environments.
Windows 7 Home on my HD C partition
Windows 7 Professional on my HD F partition.
The CQ 71 has a built in Webcam, that shows up under Windows 7 Home premium Device Manager - Imaging Devices (Cameras and Scanners) as HP-101, linked to the required drivers.
Under Windows 7 Home premium:
- The built-in CQ 71 Webcam is detected and operational - the HP-101 entry is present in Device Manager.
- Applications using a Webcam like Skype, Mycam, Manycom etc connect with the Webcam
- When I plug in an external Webcam, thet webcam is detected as well, drivers loaded etc.
Under Windows 7 Professional:
- The built in Webcam is not detected, in the Device Manager -Imaging Devices, the HP-101 Webcam entry is absent
- Skype, Mycam, Manycam cannot find a Webcam (also not when an external USB Webcam is plugged in)
- A plugged in external Web cam is not detected as an imaging device.
I use a Brother printer/scanner/fax machine, the Brother scanner device is visible as Imaging device in Device manager in both Windows 7 Home premium and Windows 7 Professional.
Other USB devices, portable disks, card readers etc seem to work OK in both Windows 7 environments.
The HP support pages provide information what to do when a internal Webcam is not detected; The recommended actions make no difference. Going back to a previous W7 Prof restore point is no option, as on the CQ 71 notebook the built-in Webcam never functioned under W7 Professional.
The major difference is that all Windows 7 Home Premium relatede system software resides on the C partition, all Windows 7 Professional system software on the F partition.
I'm looking for a way to kickstart the built in CQ 71 Webcam under Windows 7 Professional installed on a non-standard partition.
Your suggestions will be very welcome.
Jan Dijckmeester.

Hi again jdij,
It is good to hear back from you!
To enable your system to detect the Webcam in Windows 7, I recommend re-installing the original drivers and software that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
If the webcam is still not detected, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 7).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 7), as well as Performing an HP system recovery (Windows 7). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

RAID disk not detected by Windows XP

Similar Messages

Maybe you are looking for