RAID driver for Linux Assaf?

I have an 845 Ultra AR and the amount of mb's with a PDC20276 chip from promise is growing. Sadly the Promise source code are not open so the Linux community can't write any drivers on their own, nor do they support the OEM chips - this is left for the mb manufacturers themselves. The chip has Linux support according to the datasheet but I have yet to see any Linux drivers. I really want to be able to install Linux on my RAID 0 array so if you Assaf or somebody else has any way of getting some binaries or drivers for this chip I would be forever grateful. Thanx

Actually you can use the linux drivers on Promise's web site, even though you are using an OEM chipset. I've done this myself on an MSI motherboard with on-board RAID, I think the mobo was Pro266TD-Master.
The downside is that there is a limited set of distributions and kernels that are supported, at the time I had to use the RH 7.1 instead of 7.2 because the 7.2 drivers were not compiled for dual CPU support.

Similar Messages

  • Need RAID Driver for 64-bit WXP - Qosmio F30

    Hi everyone..
    I'm looking tor Raid driver for winXp x64 bit...
    My laptop is Qosmio F30-140
    Please help me to find it..
    Thanks for help..
    Salam

    Hello
    I Have RAID Driver for Windows Vista x64
    http://cdgenp01.csd.toshiba.com/content/support/downloads/raid011016vista_os2007087a.exe
    try it on XP 64 i think it will work
    Reaver

  • Oracle JDBC Driver for Linux

    I'm looking for a place to download an Oracle JDBC driver for Linux. I have installed Oracle 8.1.5 for Linux, but don't find the driver either in the installation, nor on the CD. Can anyone point me to someplace I might be able to find it?
    Also, generic help in setting this up to work, JDBC API calls would also be of great help.
    Thanks.

    Luis Claudio Rodrigues da Silveira (guest) wrote:
    : How can I configure JDBC driver in a Suse environment? What
    are
    : the necessary steps?
    : Thanks in advance.
    1) You need classes111.zip usually located at
    $ORACLE_HONE/jdbc/lib.
    2) Add classes111.zip to CLASSPATH and export
    3) If you use thin driver your code should look like:
    Class.forName ("oracle.jdbc.driver.OracleDriver");
    // Connect to the database
    // You must put a database name after the @ sign in the
    connection URL.
    // You can use either the fully specified SQL*net syntax or
    a short cut
    // syntax as <host>:<port>:<sid>. The example uses the
    short cut syntax.
    Connection conn =
    DriverManager.getConnection
    (jdbc:oracle:thin:@hostname:port:ORACLE_SID,
    USER_NAME, PASSWOED);
    null

  • Where can i find mysql Jdbc driver for linux

    Hi all,
    Can any one give urls to download mysql jdbc driver for linux.
    And also for ODBC DRIVER FOR MYSQL ON LINUX.
    Thanks

    http://mmmysql.sourceforge.net/
    (This is a type 4 driver, so "for Linux" is irrelevant.)

  • Raid Drivers for Linux - Qosmio F30-111

    Good morning
    I have a Qosmio F30-111 and i need the drivers for the Raid controller for Linux. Can anyone help me.
    I have RAID-0 and the notebook doesn't boot. It shows the logo of XP and them reboots. So i need to boot from cd or pendrive to acess or repair the raid partition.
    Thank you
    Antonio Jose

    Sorry to say but I don't have more knowledge about this matter.
    So can you help me !!!!
    Means give me some information about this product.
    I will gonna very happy if you Help Me!!!
    Thanks in advance

  • Nokia CA-53 cable driver For Linux

    From where can I download the Nokia CA-53 cable driver for Linux??

    From nowhere. Such a piece of software does not exist.

  • Need RAID driver for k8t master2-far package didnt come with disk driver

    I bought the K8T Master2-FAR and the VIA VT6420/VT8237 Disk Driver was not included. I'm trying to install WinXP64 but I need the raid driver before I can. I went to the download section of msi and select my board but the drivers are all 32bit when i tried to use them. There are several 64-bit drivers on the msi cd under Adaptec and LSI but not sure which one of these would work for me. Can someone show me where I can get the correct 64-bit raid driver for my board?
    Thanks for your time.

    Hi all , I have a  MSI K8N MASTER2 FAR S940 SLI MAINBOARD with 2 raptor wd and I need raid driver (for hardware raid). Help me!!! 

  • MSI GX633 DRIver For Linux

    Please help me :
    where can i
    download
    MSI GX633 DRIVER For
    Linux
    Please help help.
    thank all manager

    There are no drivers to download for Linux because a) MSI does not support Linux on their products, and b) your Linux distribution will normally already include all the drivers you need.
    Which Linux distribution have you installed, and is there a particular driver you need?

  • Nigpib-linux-0.6 GPIB software driver for Linux and PXI GPIB board

    My I use nigpib-linux-0.6 GPIB software driver for Linux in a Compact PCI system running linux and equipped with your PXI GPIB board ?
    Thanks.
    Paolo Santinelli.
    [email protected]

    If you alter the device ID of the device from c801 to c821 within the driver module, you should be able to use the driver with the PXI board.

  • EPrint driver for Linux?

    Just discovered the eprint driver for Windows and Mac OS, They are great for printing to my home 8500A plus while on company VPN. The advantage of using the driver than just email with attachment is that it can turn on double-sided printing.  I wonder if there is an eprint driver for Linux as well. I've used hplip and it works well for LAN connected printers. But the eprint is so much more convenient when you're on the road and especially VPN.

    My suggestion would be to leverage Google Cloud Print, if you have the ePrint version of the 8500A.
    When you get your @hpeprint email address, you can link it to Google Cloud Print here:
    http://www.google.com/intl/en/cloudprint/learn/setup-hp.html
    I am not well versed on Linux but perhaps this could also be of some help.
    Install Google Cloud Print on a Linux server:
    http://support.google.com/a/bin/answer.py?hl=en&answer=2906017
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Lenovo G570 - Atheros Lan Driver for Linux required

    Dear All
    I have bought lenovo G570 laptop and i installed Enterprise Linux (Oracle Linux 5.8) , i need Atheros Ethernet Driver for Linux please help and support.
    Regards
    Habib

    Dear All
    I have bought lenovo G570 laptop and i installed Enterprise Linux (Oracle Linux 5.8) , i need Atheros Ethernet Driver for Linux please help and support.
    Regards
    Habib

  • Partitioning drives for linux and windows 7

    I want to know if there is a piece of software that is free that can partition my drives so that I can triple boot OSX lion, windows 7 (which is currently blocking...) Linux (ubuntu puredyne).
    A little bit of guidance would be much apprieciated as I have already tried fixing the partition tables MBR in the terminal and ended up disabling windows.
    I know how to reinstall windows but what software can partintion the drives for linux as a triple boot?
    Thanks.

    Well, this is possible using Disk Utility as well as the Linux formatter. However, to triple boot will require special software: The rEFInd Boot Manager - Roderick Smith.

  • How to format a hard drive for Linux?

    I have a hdd (500gb) that used to be my internal drive for my MBP 2012. It currently has Mac OS 10.10 and Ubuntu 14.04. I want to erase the drive though so I can make it strictly for Linux. The question is which format do I choose in disk utility. These are my options:
    Mac OS Extended (Journaled)
    Mac OS Extended (Journaled, Encrypted)
    Mac OS Extended (Case-sensitive, Journaled)
    Mac OS Extended (Case-sensitive, Journaled, Encrypted)
    MS-DOS (FAT)
    ExFAT
    Thanks in advance

    Format it from the Linux installer. You cannot format it using Disk Utility because you cannot format a startup volume.

  • SQL Server Driver for Linux causes Segmentation Fault

    Hello,
    I'm using the SQL Server Driver 11.0.1790 on Linux with mod_perl and Apache. While running fine with all my CLI Perl apps I occasionally get Segmentation Faults when using it from within mod_perl applications. Sometimes every other connect to the database
    segfaults. I've created a core dump and did a stack backtrace:
    Loaded symbols for /usr/lib/../lib64/libxml2.so.2
    Core was generated by `/usr/sbin/httpd2 -X'.
    Program terminated with signal 11, Segmentation fault.
    #0 0x0000000000000000 in ?? ()
    (gdb) bt
    #0 0x0000000000000000 in ?? ()
    #1 0x00007f8a8aeda803 in __connect_part_two (connection=0x7f8a99c885e0) at SQLConnect.c:1891
    #2 0x00007f8a8aedffd6 in SQLDriverConnect (hdbc=0x7f8a99c885e0, hwnd=0x0, conn_str_in=0x7fff1e7369ee "",
    len_conn_str_in=<value optimized="" out="">,
    conn_str_out=0x7fff1e736a80 "DSN=XXXXX;UID=XXX;PWD=XXXXXXXX;WSID=XXXXXXXX;DATABASE=XXXXX;MARS_Connection=Yes;",
    conn_str_out_max=512, ptr_conn_str_out=0x7fff1e736a7e, driver_completion=0) at SQLDriverConnect.c:1530
    #3 0x00007f8a8b1458ee in odbc_db_login6 (dbh=0x7f8a99938ca0, imp_dbh=0x7f8a99c8acd0,
    dbname=0x7fff1e736c80 "DSN=XXXXX;MARS_Connection=Yes;UID=XXX;PWD=XXXXXXXX", uid=0x7f8a9996e8b0 "XXX",
    pwd=0x7f8a9996e8d0 "XXXXXXXX", attr=0x7f8a99938c40) at dbdimp.c:942
    #4 0x00007f8a8b141822 in XS_DBD__ODBC__db__login (my_perl=<value optimized="" out="">, cv=<value optimized="" out="">) at ./ODBC.xsi:98
    #5 0x00007f8a9125b091 in Perl_pp_entersub (my_perl=0x7f8a96274f50) at pp_hot.c:3046
    #6 0x00007f8a912595f6 in Perl_runops_standard (my_perl=0x7f8a96274f50) at run.c:41
    #7 0x00007f8a911eb755 in Perl_call_sv (my_perl=0x7f8a96274f50, sv=0x7f8a99938bc8, flags=2) at perl.c:2632
    #8 0x00007f8a8b791d02 in XS_DBI_dispatch (my_perl=0x7f8a96274f50, cv=0x7f8a98cbbe60) at DBI.xs:3473
    #9 0x00007f8a9125b091 in Perl_pp_entersub (my_perl=0x7f8a96274f50) at pp_hot.c:3046
    #10 0x00007f8a912595f6 in Perl_runops_standard (my_perl=0x7f8a96274f50) at run.c:41
    #11 0x00007f8a911ebab0 in Perl_call_sv (my_perl=0x7f8a96274f50, sv=0x7f8a97db4f68, flags=10) at perl.c:2647
    #12 0x00007f8a9154ba31 in modperl_callback (my_perl=0x7f8a96274f50, handler=0x7f8a96230c90, p=0x7f8a96334838, r=0x7f8a963348b0,
    s=0x7f8a962303b0, args=0x7f8a998376a8) at modperl_callback.c:101
    #13 0x00007f8a9154c79c in modperl_callback_run_handlers (idx=6, type=4, r=0x7f8a963348b0, c=<value optimized="" out="">, s=0x7f8a962303b0,
    pconf=<value optimized="" out="">, plog=0x0, ptemp=0x0, run_mode=MP_HOOK_RUN_FIRST) at modperl_callback.c:262
    #14 0x00007f8a9154cb6f in modperl_callback_per_dir (idx=-1714610816, r=<value optimized="" out="">, run_mode=<value optimized="" out="">)
    at modperl_callback.c:369
    #15 0x00007f8a91546b93 in modperl_response_handler_run (r=0x7f8a963348b0) at mod_perl.c:1000
    #16 modperl_response_handler (r=0x7f8a963348b0) at mod_perl.c:1039
    #17 0x00007f8a95f01e08 in ap_run_handler ()
    #18 0x00007f8a95f0226c in ap_invoke_handler ()
    #19 0x00007f8a95f0ff00 in ap_process_request ()
    #20 0x00007f8a95f0ce98 in ?? ()
    #21 0x00007f8a95f08b28 in ap_run_process_connection ()
    #22 0x00007f8a95f14e5a in ?? ()
    #23 0x00007f8a95f15126 in ?? ()
    #24 0x00007f8a95f15903 in ap_mpm_run ()
    #25 0x00007f8a95eec9be in main ()
    </value></value></value></value></value></value></value>
    Calling something at NULL obviously doesn't look right…
    Can onebody help fixing this issue?
    Best regards,
    Stephan

    Hi Stephan,
    This is a bug in the unixODBC Driver Manager 2.3.0.  Essentially, you can only have one HDBC per HENV.  The mod_perl must be creating the connections upon the same HENV.
    The bug appears to be fixed in version 2.3.1 but we have not yet certified that out driver can work with 2.3.1.  See the 2.3.1 release notes at
    http://www.unixodbc.org/ where the last item says:
    "Driver version was not being held when a second connection was made to the driver"
    The Driver Manager would "forget" that we are an ODBC V3 driver and try intereacting with us as an ODBC V2 driver for the second connection (which fails).
    The workaround is to create a new HENV for each connection but I'm not sure if this is possible in mod_perl.

  • Problem to compile mxi-2 driver for linux 2.4.4

    Hello,
    I have a MXI-2 (VME/PCI) hardware and I'd like to install the appropiate
    software for my PC which runs under SuSE Linux 7.2 (kernel 2.4.4-64GB-SMP).
    I have succesfully installed NIVISA and NIVXI software (RPMs) and then
    I'm trying to compile (using make) the vxi module for linux. It does not work...
    Do you have a solution ?
    Thanks in advance.
    Remi CORNAT
    Error log from make :
    gcc -o vxi.o -DVXI_MAJOR=0 -c -O -Wall -D__KERNEL__ -DMODULE -I/lib/modules/2.4.4-64GB-SMP/build/include vxi.c
    vxi.c: In function `vxi_vma_nopage_shm':
    vxi.c:64: structure has no member named `vm_offset'
    vxi.c:65: warning: implicit declaration of function `MAP_NR'
    vxi.c: At top level:
    vxi.c:77:
    warning: excess elements in struct initializer
    vxi.c:77: warning: (near initialization for `vxi_vm_ops_shm')
    vxi.c:77: warning: excess elements in struct initializer
    vxi.c:77: warning: (near initialization for `vxi_vm_ops_shm')
    vxi.c:77: warning: excess elements in struct initializer
    vxi.c:77: warning: (near initialization for `vxi_vm_ops_shm')
    vxi.c:78: warning: excess elements in struct initializer
    vxi.c:78: warning: (near initialization for `vxi_vm_ops_shm')
    vxi.c: In function `vxi_mmap':
    vxi.c:86: structure has no member named `vm_offset'
    vxi.c:102: structure has no member named `vm_offset'
    vxi.c: At top level:
    vxi.c:114: warning: initialization from incompatible pointer type
    vxi.c:115: warning: initialization from incompatible pointer type
    vxi.c:116: warning: initialization from incompatible pointer type
    vxi.c:118: warning: initialization from incompatible pointer type
    make: *** [vxi.o] Error 1

    As of August 2001, National Instruments does not have a driver that is supported under the 2.4 kernel of Linux. The latest version of NI-VXI is supported under the 2.2 kernel for our PCI-MXI-2 and VXIpc-870 controllers.
    Trey Hamilton
    Applications Engineer
    National Instruments
    http://www.ni.com/support

Maybe you are looking for

  • Quicktime vs. final cut

    This is wierd...I edit a time line in FCP then export the time line as a quicktime to move to idvd...my fcp time line plays clean but when I open the QT export in qt player there is extra video at the end...not the way I edited the piece... Is this a

  • Basic question on classification

    Hi, Why is classification used? How does it help beside being categorised differently than the actual folder structure? Please clarify. Thanks and regards, Arun

  • Windows X64 and 1 speaker work

    Hi, I have a creative inspire p5800 5. surround system. Since i installed windows xp x64 and downloaded appropriate drivers only the base and front right speaker works. Lots of other people with different systems appear to be having similar problems

  • Dynamically set ViewObject where clause dynamically from Java bean

    I have a requirement to display all of the records from a table when the JSP is first brought up, so my View Object looks like this: "select emp_name from emp" Then the users wants to ability to pass paramters to that View Object to refine the list s

  • Flash Movie Stops Playing on Laptop

    I have a very basic flash movie in an html page. It does fine except on my client's wireless laptop where it stops about 1/3 of the way through. It does fine on his pc at the same time it stops on his laptop. Any suggestions as to what the problem is