Raid drivers for SUSE 8 an above

Does anyone know which Raid drivers to use for Linux SUSE ver8 or above?? Are they on the floppy that came with the MB? Where can i download them and why does Promise have no mention of the Promise PDC20376 sata150 chip on its site???
All help welcome and thx in advance
JAs
Me MB is a K7N2 Delta ILSR (bios 7.3)
raid stripe (2x MAxtor 120GB SATA150)
PS I how how to install Linux with raid support just need to know the right driver thx

i think your out of luck,evan the stand alone card its based on has only windows drivers
http://www.promise.com/support/download/download2_eng.asp?productId=107&category=bios&os=100

Similar Messages

K9N Neo-F v.3: what RAID drivers for the floppy?

I downloaded the drivers that are suppose to be for the floppy install during the windows XP setup (using f6). I found these by using the MSI website and searching for drivers for my motherboard model. It specifically says they are raid drivers for floppy disk. After unzipping this file, it creates a main folder called WinXP. There are two subfolders inside that called "sata_ide" and "sataraid".
now, from my experience windows has to see these drivers on the root of A:\ during installation. Righ off the bat, I can tell this zip file is improperly formated to be used with a floppy for windows XP installation. The files within the two subfolders are named the same, so you cant just place all of these drivers on the root drive without overwriting them.
So, I made 3 floppies. On one floppy I followed the directions given on the site where I downloaded the zip file: Unzip the file and copy all files to the floppy. This meant sub folders and all. I created another floppy with ONLY the sataraid drivers directly in the root of A:. I created a third with only the sata_ide drivers directly on the root of A:
I created my striped array using 2 WD SATA II drives. Status is healthy. Upon installing windows, I hit f6 and inserted my floppy when prompted. None of the floppies I created worked. I even went the extra step and formatted and created partitions on each drive. Still no dice.
I need to know EXACTLY how to create the driver disk for this motherboard. Links to the drivers or any extra information is greatly appreciated. Anyone with experience in this realm on this particular motherboard, Id like to hear from you.
Oddly enough, I was able to build a RAID/0 config using an LSI PCI Raid controller and two Ultra 320 SCSI Seagate Cheetahs. Something I was told prior to that this motherboard would not be able to do. Now here I am struggling using drivers given to me directly from MSI with HDD's the motherboard completely supports

Quote from: Rayx0r on 14-November-07, 05:43:43
Thanks for the help, the problem was a bad floppy ribbon cable , the raid is loaded.
nice, well you should check floppy integrity 1st to make sure its working correctly.

Raid Drivers for Linux - Qosmio F30-111

Good morning
I have a Qosmio F30-111 and i need the drivers for the Raid controller for Linux. Can anyone help me.
I have RAID-0 and the notebook doesn't boot. It shows the logo of XP and them reboots. So i need to boot from cd or pendrive to acess or repair the raid partition.
Thank you
Antonio Jose

Sorry to say but I don't have more knowledge about this matter.
So can you help me !!!!
Means give me some information about this product.
I will gonna very happy if you Help Me!!!
Thanks in advance

MOVED: Vista RAID drivers for K8N Diamond Plus?

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=104872.0

yOu needseperate drivers for NV raid and Sil raid.
you need seperate drivers for xp and 64 bit xp
msi diamond plus driver page.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=710&kind=1
Nv raid
xp64
javascript:void(window.open('/program/support/download/dld/spt_dld_file_record.php?folder=2&kind=1&name=NVRAID_XP64bit.zip','open','width=550,height=250,scrollbars=yes,resizable=no'))
xp
javascript:void(window.open('/program/support/download/dld/spt_dld_file_record.php?folder=2&kind=1&name=NVRAID_32bit(XP).zip','open','width=550,height=250,scrollbars=yes,resizable=no'))
sil
xp64bit
javascript:void(window.open('/program/support/download/dld/spt_dld_file_record.php?folder=2&kind=1&name=Sil3132WHQL(64bit).zip','open','width=550,height=250,scrollbars=yes,resizable=no'))
xp
javascript:void(window.open('/program/support/download/dld/spt_dld_file_record.php?folder=2&kind=1&name=Sil3132_NM3001.zip','open','width=550,height=250,scrollbars=yes,resizable=no'))
save apropriate drivers to the floppy disk provided. mark on the disk which version they are and when they were released.
1st enable all sata devices in bios. Enable NV raid and sil raid in bios if nessisary.
2nd set boot priority to dvd/cd.
3 save and exit
4 put in xp/xp64 bit install disk
5 as it boots up the lower left hand screen will say "hit f6 for additional drivers" or something similar. Hit f6
6 press S to load drivers from the floppy.
7 put correct disk in.
8 Select the nessisary drivers. For NVraid there are 2 drivers to load from the disk. I did it by loading (1) then (2)
9 It will eventually reboot. when it does hit f10 to enter nvraids config. Set up your raid set up. exit out
10 continue with xp/xp64 bit install.
I've used sil in the past and it was nearly identicle. Have fun

Raid Drivers for TS440

Really? I mean, I have been in this business for years.. and I have never.. ever had this much trouble finding a stupid driver. Insane!
I dont want to use easy setup.. I want to manually install server 2008 r2... I am amazed at how difficult it is. I have tried every single driver availiable on the support/ drivers page for the TS440. I have to be missing something, but my rage at this point is blinding. I am in awe.. this reminds me of the old gateway days.. jesus h.

For those that might stumble across this. If you are trying to extract the files in the .exe (like I have always been able to do before ) to get the .inf files and put them on a usb.. you are wrong.
You have to download and run the stupid .exe, which will put the stupid .inf's in a default location of C:\Swtools or some garbage. HP called, they want their dumb *** SOP's back.

HP Pro 3500 Microtower PC drivers for Windows XP 32bit

Hello,
May I kindly ask if it would be possible to assist me in terms of locating Windows XP Home Edition (32 bit) drivers for the HP Pro 3500 Microtower PC (product number F4Q49ES )?
<script type="text/javascript" language="JavaScript">// var theme = '#EB5F01'; // </script> <script src="https://secure.hp-ww.com/country/us/en/js/hpweb_utilities.js" type="text/javascript" language="JavaScript"></script> <script src="https://ssl.www8.hp.com/uk/en/system/include/privacy_cookie.JS" type="text/javascript"></script> <script src="/t5/forums/postpage/board-id/util/browser.js" language="javascript"></script> <script src="/t5/forums/postpage/board-id/util/webclient.js" language="javascript"></script> <script src="/t5/forums/postpage/board-id/util/ScriptLib.js" language="javascript"></script> <script type="text/javascript" language="JavaScript">// var theme='#EB5F01'; // </script> <script src="https://secure.hp-ww.com/country/us/en/js/hpweb_utilities.js" type="text/javascript" language="JavaScript"></script> <script src="https://www.hp.com/cma/ng/lib/bluekai/hpbluekai.js" async="true" type="text/javascript"></script>
In HP's Support Center portal I only see drivers for Windows 7 and above.
Many thanks.
Best regards,
Ryan

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

WinXP Pro 64, any nForce3 SATA/RAID drivers?

Im looking to install Windows XP pro 64 bit and notice the only drivers that are missing in the download section is the Raid drivers for Nforce3.
Do i install the regular XP ones or does 64bit have them on disk already? http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=572&kind=1

Quote from: Supershanks on 15-August-05, 19:39:15
I'm confused your after nvidia drivers yet spec shows = VIA® K8T800 chipset.
If Nvidia d/load the nvidia64 drivers & make a new floppy with the updated drivers. to do this Right click the D/L driver File & select unpack/unzip. Navigate to the \Nvidia\nForce_vrsion ?? \IDE\WinXP folder copy everything except the raidtool Folder onto floppy.
luck
Why are you confused? i want to know why or if i can use regular XP pro raid drivers for my Nforce3 chipset on MSI neo platinum board if i install Windows XP pro 64-bit edition. There is no 64 bit download for them so , do i need any?

K8N 64bit sata raid drivers?

ANyone know where or how to get drivers for intalling 64bit windows on this motherboard. I cannot find any sata raid drivers for this board for w64. Thankyyou

Thankyou for your responses. I did try extracting the nvidia files to a floopy but I must have done something wrong. I did find a site that showed how to use the via drivers and make a txsetup.oem file, but that seemed to complicated. I know you folks will have an answer. Thanks again.

VIA SATA RAID Drivers

I lost the floppy disk containing the VIA SATA raid drivers for Windows Installation. My M/B is the KT600 FISR. So I kinda need the drivers as I am setting up a SATA drive.
Can someone please say where I can get the drivers, or email me the attached drivers.
My email is:
[email protected]
Thanks,
Sam

I am worried my floppy drive controller or something on the motherboard is not working. I tried the floppy disk containing drivers and Windows Installer said still said "Please insert the manufactuer's disk", I took out the disc and got the same message.
Then I booted up Windows Installer with the same floppy disk in a different MSI motherboard (a P4 mobo I have) and it detected the drivers fine.
Tried all the updated drivers you specified, and the floppy drive reads fine from Windows and is brand new (same problem with old one which I replaced only to find the same problem :
The mobo is still under warranty, should I give MSI / dabs.com a call?
Sam

K8N Diamond Plus SiI 3132 WinXP x64 non-RAID drivers?

Hi
I'm looking for non-RAID drivers for the SiI 3132 on my K8N Diamond Plus for WinXP x64 (I managed to fine the x32 ones and they work fine so I know it's not the drives or the moboard. I tried the drivers on MSI's website.
I've searched around the forum and followed the leads onto planetamd64 and the Asus website for them, but to no avail.
To be precise, I have selected non-RAID in the BIOS, and the drives to show up on on the POST screen, but do not appear in Win 64; there is the classic exclamation mark in the device manager for a 'Mass Storage Device'. I don't want to concatenate the drives in RAID mode, so I did not try booting with that selected in the BIOS lest it destroy the stuff I have on them.
[I miss the simple JBOD option in the 3114...]
Any help gratefully appreciated!
thx
bn

Hi all,
I solved the problem.
You won't find the drivers under the drivers section of SiI's website but you will in the Knowledge Base. Look under Serial ATA | COntrollers | SiI3132, you'll find article 11043 'SATA 64 bit Windows IDE driver - released' dated 8/19/05. Click under that and you'll find a file 3132_win64_idrv_1004_logo.zip. It's what you need.
Hope this helps someone.
bn

K8n neo2-fx Doesn't come with a floppy sata raid driver for XP 64-bit edition

I've been waiting for so long but without any luck.Why don't msi support it although
i can see driver for realtek 64 bit edition and nforce x64?
I'll be waiting for news.Thanks to anyone who will try to help me...

download thease drivers: http://www.nvidia.com/object/nforce_udp_winxp64_6.25.html
then look here dude:
https://forum-en.msi.com/index.php?topic=99095.0
and use the same procedure to extract RAID drivers for XP64 and copy to diskette.

RAID drivers that support Windows 2003 server for Qosmio G30-153

Hi,
Where can i find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153 )
Thanks in Advance.
Abdul Hameed

Hi
Windows Server 2003 should support the XP drivers.
So try to search for the RAID XP drivers!
regards :)

Qosmio F20-136 tv tuner drivers for Linux Suse 10

Hello,
Does anyone know where I can find linux drivers for the F20-136's tv tuner? I understand that the Qosmio Player is based on linux so presumably they do, but I have been unable to find them.
Ideally, I'm after Suse 10 compatible drivers.
Thanks

Hi,
I'm sorry but Toshiba doesn't support Linux for their Notebooks.
But have a look on this page, maybe you will find something useful.
http://linux-on-laptops.com
Bye

How do I update my 6490m drivers to 11.7 or above (for BF3 :P)?

I've just got battlefield 3 but when I launch it it says that I have only got 11.1 driver installed for my 6490m GPU and that it recomends 11.7 and above. How do I download and install the driver? I would like to update the drivers because there is a bit of freeze in the game from time to time, and don't get me started with the multiplayer (although I think this is downl to the large usage of the servers as it is a new game.) I've downloaded and installed CCC from ATI's website if that helps.
thanks.
oh yeh, I'm running windows 7 32bit on bootcamp (that's what I want the drivers for, not OSX as I don't game or use CAD on that)

I found the solution.
There is a 100+MB file from ATI that will install the Catalyst software directly, or already uncompressed. Here is the link (used through www.my-config.com website and plugin required to detect videocard):
http://www.touslesdrivers.com/index.php?v_page=23&v_code=32678&v_langue=en
or download directly here:
https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/DRIVERS/mobile/11-11_mobilit y_vista_win7_64_dd_ccc.exe
Saludos

Oracle Ent. Linux drivers for HP Smart Array B110i Sata Raid Controller

Trying to install Oracle Ent. Linux (OEL) release 4 update 8 on HP DL 180 G6 server. Where we can find OEL drivers for the sata raid controller ?
(HP Smart Array B110i Sata Raid Controller)
Thanks in advance.

The HP support side shows a Linux certification matrix at: http://h18000.www1.hp.com/products/servers/linux/hplinuxcert.html
From there you can also download the necessary drivers and instructions or use HP smartstart CD which prepares the system for the OS you need to install. Oracle Enterprise Linux is binary compatible with RHEL. You will need to click on "Archive" to see support for Enterprise Linux version 4 and older.
Also interesting should be Red Hat Enterprise Linux Technical Exceptions at
http://h18000.www1.hp.com/products/servers/linux/supportmatrix/rhel/exceptions/rhel-exceptions.html

Raid drivers for SUSE 8 an above

Similar Messages

Maybe you are looking for