RAID drivers that support Windows 2003 server for Qosmio G30-153

Hi,
Where can i find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153 )
Thanks in Advance.
Abdul Hameed

Hi
Windows Server 2003 should support the XP drivers.
So try to search for the RAID XP drivers!
regards :)

Similar Messages

Whether Oracle 8.1.6 Supports Windows 2003 Server/Windows 2000 Adv. Server

Dear All,
Whether Oracle 8.1.6 Supports Windows 2003 Server/Windows 2000 Adv. Server.
I tried it in windows 2003 server but i couldn't. Atlease tell me wheather it support windows 2000 adv. server. This is my first dba job.
Under Doc ID: 66397.1 saying Oracle 8.1.6 Not Support Windows NT Server 4.0 Terminal Server Edition.
Under Doc ID: 77627.1 saying Oracle 8.1.6 Supports Windows 2000 Support.
Please help me out urgently.

Since you have access to Metalink, you could be looking at the Certify tab to find this information. But, the answer is that 8.1.6 is no longer supported by Oracle. However, you should be able to install it on Win 2000 advanced server. You just can't get any support for it.
The earliest version of db supported on Win 2003 was either 9.0 or 9.2, but 9.0 is desupported now as well.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Looking for T61 Drivers to support Windows 2008 Server

Hello:
I recently bought a T61 that came with Vista Ultimate. I ventured into installing Windows 2008 Server on it.
I have been almost successful in my attempt. The machine does operate and I was able to use the Vista drivers to configure the components.
I compare the Device Listings under Vista and under Server 2008 and I see the following missing components:
Bluetooth Radios
    Microsoft Bluetooth Enumerator
Disk drives
    IMD-0
Human Interface Devices
    Bluetooth Remote Control
    HD-compliant consumer control device
IDE ATA/ATAPI controllers
    IDE Channel
Monitors
    ThinkPad Display 1440x900 (mine says Generic PnP Monitor)
Network Adapters
    Bluetooth Device (Pesoanl Area Network)
    Bluetooth Device (RFCOMM Protocol TDI)
SM Driver
    SM Bus Service
System Devices
    UMBus Enumerator
The good news is that the laptop works fine as a Server. If I could resolve these missing components, it will be nice.
I searched through Google but I don't seem to have any luck identifying the drivers. And, of course Lenovo Technical Support said that they do not support that OS on this laptop even though I have proved them wrong!)
Can somebody advise me?
venki

Hello venki,
I have run server 2008 on my T61 7665-b68.
I have installed all Drivers for Vista 64 from Lenovo with systemupdate.
For the bluetooth installation look hier: http://capitalhead.com/articles/enable--install-microsoft-bluetooth-stack-on-windows-server-2008-x64...
regards
Sven
IBM T61 - 7665-B68 - 4GB RAM - 250GB HD - 1,8 GHz T7100 - 14,1" Display -1440x900 Intel 4965 a/g/n WLAN - DVDRW Multidrive III - Bluetooth 2.0 - Fingerprint

Windows 2003 server for IPCC 7.0

Hi all,
I got a problem with IPCC 7.0. I have tried to reinstall the IPCC 7.0 since get the crash of Hardrive. When I run the win 2003 server that bundled from cisco, I found this error message :
"The installation program has determined that this server is not supported by this media".
Last year, I have installed this server with the same source of windows version (2003). But I still dont understand why it does not work right now.
Below my spesification server :
Type          : MCS-7825H-3.0-SERVER 74-3461-01
Memory     : 2 GB
Hardrive     : 80 GB RAID 1 (consist of 2 Harddrive @ 80 GB)
I also attach the capture of error message. Please kindly help me to solve this issue .
Thank You.

AA, you can try standard Windows 2003 operating system.
Sent from Cisco Technical Support iPhone App

CSA 5.1 windows 2003 server 64bit support

Dear Netpros,
Could anyone tell me CSA 5.1 support windows 2003 server 64 bit OS.
I am trying with this machine but not installing.
SWAMI

Currently CSA does not support 64-bit platforms. This is because Microsoft has included a feature called patchguard or something like it in those platforms in order not to allow to touch Kernel, yet this is the way CSA works.
Microsoft and Cisco still working on it. It's likely that CSA v6 will support 64-bit platforms but there's no release date yet.

DLU with Windows 2003 server

I am going to be blustery only to provide you with the most info as
possible.
I have setup a Windows 2003 server for terminal services. Installed the
latest Novell Client 4.9 sp2, nici, nmas. I installed the latest
zfdagent.msi from zfd4.01.ir7.
The setup is similar to any WindowsXP machine and I have done this a
thousand times. I have verified that the DLU policy set for the container
includes a DLU for Windows 2000 and Windows 2000 Terminal Services. Okay I
should be able to login and have zenworks create a local users acount but
it does not.
Here are the differences that may effect the proper operation of desktop
management:
a. I have this terminal server setup as a member server in our AD domain -
only to connect to the TS License Manager.
b. I have setup the Netware client location policy | login profile |
Windows Tab | to login in to the local Win2k3 server NOT the domain - and
of course the username field is empty.
c. Then I install the ZfdAgent.msi - when the intsaller gets to the
MiddleTier section - I usally click next and ignore this area, however
this time around the installer will not continue unless I enter an IP
address into the Middle Tier server field.
Other than the above - fairly standard install.
Any help appreciated.
Regards
Ross.

> I have setup a Windows 2003 server for terminal services. Installed the
> latest Novell Client 4.9 sp2, nici, nmas. I installed the latest
> zfdagent.msi from zfd4.01.ir7.
Windows 2003 is not supported with ZfD4.x.
You must use at least the Agent from Zen 6.5.
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Running Windows 2003 Server on Xserve Intel with BootCamp?

Well...
This sounds like awfully bad idea, but one of our clients needs to run Windows 2003 Server for a certain project in their organisation. Fundings for the new hardware is available. Windows-compatible hardware!
The idea here is to get fundings for a new Xserve, run it with Windows 2003 Server in the project and then keep the delicious hardware for free when the project ends. A PC-server would be thrown out of a window in this 100% Mac-centric department.
Windows 2003 Server runs smoothly on a MacPro with Boot Camp and Parallels Desktop. What about the XServe Intel?

Schuckert-
Greetings.
Are you in a position to test the configuration for a while? If so then I vote do it. If not, you could buy a copy of OSX Server and install it on a Mac Pro and try running your software on the XServe platform.
However, depending on your relationship with this client, I would have them sign a release based upon the beta-ness of the software.
A lot of us here are not in a position to give such things a try-just yet. Too busy trying to make things transition smoothly on the accepted configurations.
Although I will say that I suppose a client will eventually pose the question to me (:>)
Luck-
-DaddyPaycheck

[b]Error in installation database in Windows 2003 server[/b]

Hi, I have a problem. I am trying to install a database Oracle Enterprise Edition 10.1.0.2.0 in a machine that has Windows 2003 Server. On having finished the installation and begin the Database Configuration Assistant appears the error ora-12546 TNS permission denied. In the file listener.log
the following messages appear:
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
In the alert.log appear:
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified O/S-Error: (OS 1) Incorrect function. !
I install in local mode, not remote and using Administrator user.
Help me, please!
Regards
Carlos

Hello,
There is a note in SAP that indicates that EMT64/x64 is not compatible with Oracle 9.2 (nota 12546) There is Oracle's FAQ that indicates Oracle's versions and Windows that he(she) supports EMT64.
http://www.oracle.com/technology/tech/windows/faq.html#x86-64
Since you can see it(he,she) indicates that Oracle 9.2 is supported in Windows 32 bits with technology EMT64
And that alone the version 10g 2 be reread it(he,she) is compatible with Windows 2003 SEVER 64 bits with technology EMT64
I hope that this costs(suits) us to solve our problems
A greeting

How can I open all ports on a Window 2003 Server

How can I open all ports on my windows 2003 server for a specific range of IP addresses?

Hi,
Just want to confirm the current situations.
Please feel free to let us know if you need further assistance.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error in installation database in Windows 2003 server 64 bits

Hi, I have a problem. I am trying to install a database Oracle Enterprise Edition 9.2.6 in a machine that has Windows 2003 Server 64 bits
. On having finished the installation and begin the Database Configuration Assistant appears the error ora-12546 TNS permission denied. In the file listener.log
the following messages appear:
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
I see the note 722966 and my procesador is EM64T
I install in local mode, not remote and using Administrator user.
Help me, please!

Hello,
There is a note in SAP that indicates that EMT64/x64 is not compatible with Oracle 9.2 (nota 12546) There is Oracle's FAQ that indicates Oracle's versions and Windows that he(she) supports EMT64.
http://www.oracle.com/technology/tech/windows/faq.html#x86-64
Since you can see it(he,she) indicates that Oracle 9.2 is supported in Windows 32 bits with technology EMT64
And that alone the version 10g 2 be reread it(he,she) is compatible with Windows 2003 SEVER 64 bits with technology EMT64
I hope that this costs(suits) us to solve our problems
A greeting

OS X client connecting to Windows 2003 Server SMB

My OS X 10.6.7 clients are connecting to Windows 2003 Server SMB share. They open files and edit them. Strange thing is that in Windows 2003 Server Open Files the files opened are listed like this:
filename.tiff:AFP_Resource
and the user is unable to save the file to the same location.
Anyone else experienced the same problem?

My OS X 10.6.7 clients are connecting to Windows 2003 Server SMB share. They open files and edit them. Strange thing is that in Windows 2003 Server Open Files the files opened are listed like this:
filename.tiff:AFP_Resource
and the user is unable to save the file to the same location.
Anyone else experienced the same problem?

(Very Ergent)R12 on windows 2003 server with itanium processor...

Hi,
Is it possible.
Processor : Itanium 2(64bit)
OS : Windows 2003 server for itanium (don't know 32/64bit)
http://www.microsoft.com/servers/64bit/itanium/overview.mspx
ERP: R12 for windows(32bit)
Is it possible with these combination
Thanks & Regards,
Shankar

Duplicate thread (please post only once):
Is it possible?
Re: Is it possible?

Windows 2003 server access getting slow from Windows7/8 client

We have Windows 2003 Enterprise Server. If I try to access through Windows 7 or Windows 8 client PC then I am getting very slow access. Slow access in terms of, if I am taking remote desktop of server [OR] if I directly browse server directory [OR] even
accessing any web application on server it is very slow.
But if I am accessing though any Windows-XP base client or even other servers having Windows 2003 or Windows 2008 then access in good.
But interesting thing is even we have other Windows 2003 server for which I am getting normal response.
Can someone guide me on the same? I am not able to understand the root cause of it.
-Abhay

Start with decreasing SMB version in clients. For inspiration look here
http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htm
Rgds
Milos

Proliant ML110 G7 Windows 2003 Server Drivers

Sto cercando i drivers per un ML110 G7 relativi a windows 2003 Server... qualcuno può aiutarmi ?
I'm looking for windows 2003 drivers for an HP ML 110 G7. Someone can help me ?

You can just run the "autorun.cmd" program in the HP SmartStart CD which comes with the machine , then go to "software" -> " Create Driver diskettes" -> " Create windows 2003 driver diskette" . Don't know what kinds of drivers are included. You'll need a floppy drive or you can use dos command " subst " to simulate a fake A: drive, because the it needs to write to A: drive .
Myself, still struggling to move a Raid 1 ( 2x160GB hard drive ) from another server to the ML110 G7. Because the OS(Windows Server 2003) is on this Raid 1, don't know how to apply the new Raid driver to the OS so that it can boot up with Raid 1 enable. The OS can boot up with SATA legacy support ( not Raid ), but when I enable Raid, the OS never boots up. Try to install the raid driver when OS boots up with SATA legacy support, then change to Raid, but still fail. Any idea ? ( I think a fresh installation should not has this problem because you can apply the raid driver when you install OS )

RAID drivers that support Windows 2003 server for Qosmio G30-153

Similar Messages

Maybe you are looking for