RAID For iMac

Can a RAID array even be used with an iMac? It's always been my understanding that a PCI card is needed for that, can Leopard now support a RAID without a card?
And is it worth getting one with a firewire 400 connection? I'm looking for just a RAID 0 for some added speed with Photoshop, but wouldn't the Firewire 400 determine the speed and be unable to use the full speed of a RAID array?
How about a network disk? The ethernet on an iMac should be a lot faster, right?
Kevin

It is easy to set up a RAID. You use Disk Utility RAID tab. I've seen people set up a RAID with a bunch of external USB floppy disc drives, just for kicks.
http://ohlssonvox.8k.com/fdd_raid.htm
Whether it is worthwhile is a different question.
In my opinion, the only time a RAID makes sense using external storage is if you want a really large single volume. Now that you can get 2TB on a single 3.5" hard drive, that may not really be a factor.
Any performance advantage of the RAID on external drives will mostly be negated by the speed of the connection. A SATA hard drive can handle higher transfer speed than even FireWire 800 can deliver. So the bottleneck is the external connection, not the storage hardware. So why not just get a single external hard drive with twice the capacity, rather than RAID two smaller drives into one larger volume. The single hard drive would be more reliable, because it is a simpler setup.
Your best bet is to use your internal storage when data transfer speed matters. Off-load stuff in your user account that really does not depend on access speed, such as your iTunes folder, to the external FireWire drive. Maintain your Photoshop archive (what you are not actively working on now) on the external drive. Keep as much free space as possible on the internal drive, to use for your current in-progress work. Back up both your internal and external drives to another larger external drive, using Time Machine.
Access speed to your internal storage over the direct SATA connection will be faster than any RAID or single drive on external storage.
How about a network disk? The ethernet on an iMac should be a lot faster, right?
Network access speeds will typically be slower, compared to direct access to local storage devices (even external storage).

Similar Messages

Is there a separate download for iMac. I bought and downloaded what I thought was the right download but it is not working and feel it might be a windows version. How doe I get it right

s there a separate download for iMac. I bought and downloaded what I thought was the right download but not working and feel it might be a windows version. How doe I get it right

Check the link below for requirements and instructions for upgrading to Snow Leopard (10.6)
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

What is the correct cable for iMac 11,2 Intel core i3, mini dvi to vga or mini display port to vga?

What is the correct cable for iMac 11,2 Intel core i3, mini DVI to VGA or mini display port to VGA to hook up to projector? Thanks!

mini-DisplayPort.
Regards.

I am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
(125734)

How do I make a private album in new Photos for IMac?

How do I make a private album in the new Photos for IMac? I had one in iPhoto, and now that all the photos migrated to Photos my private album is not hidden anymore. Thanks for help!

Photos does not hide photos in albums at all. Photos can only be hidden from Moments, Collections, Years.
If you want private albums, move the photos in questions to a different Photos Library, that you keep hidden.

A s d f g keys not working on a wireless Apple keyboard for Imac

a s d f g keys not working on a wireless Apple keyboard for Imac.
When I type they on't work.
*Exmple o complete entence.
Plee help! Thi i very rutrtin. I on't wnt to ue cut n pte or ome letter.
Thnk you in vnce.

Make a Service appointment for the keyboard at your local AASP.
Apple - Find Locations
I'm not sure how old it is, but it is covered for 1 full year as long as it didn't take that 19 story dive.

Anyone know a calendar creator program / software for iMac/MacBook that works with Maverick?

Looking for a Calendar Creator type software that works with Maverick for iMac / MacBook. Please help.

Quicken 2007
Quicken 2015 information

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

I purchased elements 9 for iMac as a paid download 10/23/2012, recently I had to replace my hard drive and lost the program. I had read that purchased downloads were available for three years but the link with my past order information is no longer click

I purchased elements 9 for iMac as a paid download 10/23/2015, recently I had to replace my computer's hard drive and lost elements. I had read that downloaded purchases would be available for 3 years but, when I click onto the serial number of that order it isn't active. By clicking onto the link it should take me to the site where I can re download the elements 9 but, it doesn't do anything. Unfortunately calling Adobe did not help, they will not address any elements questions over the phone, there's a recording directing all elements questions to this forum. Any suggestions would be greatly appreciated. Thank you. Diana

Try here:
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

HP laserjet 1020 printer Drivers for iMac

Please, where I can find out HP laserjet 1020 printer Drivers for iMac OSX 10.9.2 ?
Thanks.
JHBarbosa
This question was solved.
View Solution.

Your answer solved my doubts. Now, it's clear to me what I have to do. Thanks.
JHBarbosa

After upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.

after upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.
all my email accounts, all my emails, all my folders & subfolders (received & sent) ... everything.
help!

Remove Adobe plug ins if any.
Macintosh HD > Library > Internet Plug-ins
AdobePDFViewNPAPI.plugin
AdobePDFView.plugin

Fusion Drive option for iMac 21.5" late 2013

Fusion Drive option for iMac 21.5" late 2013 will upgrade main SATA HDD to 7200rpm model? Or just add SSD to standart 5400 rpm HDD for 21.5"?
Thank you for your attention.

You can't add an internal drive, but you can add as much storage as you want via Thunderbolt.

Where's can i Buy any Professional Authoring DVD for IMAC, did you know about Studio DVD pro ?

I need help, i need buy or dowload some Professional Authoring DVD for IMAC, I editing in my Final Cut Pro X and need a DVD authoring
after installing the Mavericks, my IDVD don't work, can someone help about this ?
also, did you know if DVD studio pro its available for sale ? if yes, where's can I buy ?
thanks

Apple discontinued DVD Studio Pro three/four years ago. You can probably find copies from private sellers, but whether it will work without problems on OS X 10.9 I don't know. I don't know of any "professional" alternative to DVDSP for Mac, but someone else here may be able to offer suggestions.
As to iDVD, it should work under Mavericks, depending on what version of iDVD you're running. You might ask for assitance in the iDVD forum. For alternatives to iDVD, see this page for suggestions:
http://alternativeto.net/software/idvd/?platform=mac
Regards.

RAID for Consumer PCs

If you have an interest in using RAID, then the MS Word document attached to this post may be useful information. Scroll all the way to the bottom for the attachment.
RAID for Consumer PCs
Table of Contents
RAID
RAID 0
RAID 1
RAID 5
RAID 10 (0+1)
INTEL Controller Support for Different RAID Configurations
Background Information for Creating a RAID configuration.
Considerations:
Performance comparisons
Creating a RAID 0 Array
Creating a RAID 1 Array
Creating a RAID 5 Array
Creating a RAID 10 (0+1) Array
Conversion from RAID 0 to RAID 5
RAID 0 to RAID 5 Observations
Other RAID Migrations
*************DISCLAIMER***********
RAID
RAID is an acronym for Redundant Array of Inexpensive Disks and also commonly called Redundant Array of Independent Disks. A RAID array is created when one or more hard disks or one or more solid state disks (SSD) are combined to form a logical volume using one of several different configurations. Consumer level PCs typically use RAID 0, RAID 1, RAID 5 and occasionally RAID 10 (0+1). The RAID configuration choice is dependent on the requirements for redundancy, speed and capacity. The choice of a RAID configuration will be a compromise between speed, redundancy, capacity and cost. The different RAID configuration options can be restricted by hardware limitations.
RAID 0
A RAID 0 volume is created when 2 hard disks are used and then data is spanned or striped across the different hard disks. The process of spanning data across different hard disks is also called scatter loading. By spreading data across multiple hard disks, a significant performance improvement can be gained. However, should one of the hard disks fail, then the entire RAID 0 configuration becomes unusable. A RAID 0 volume combines the capacity of the hard drives being used in the configuration.
RAID 1
A RAID 1 configuration is created when 2 hard disks are used and then data on hard drive 1 is replicated to hard drive 2. The process is also called data mirroring. This configuration provides for redundancy in the event of a single hard drive failure but at the expensive of a degradation to write performance as data has to be written to multiple hard drives. Since the data is being replicated between two volumes the overall capacity is limited to that of one hard drive.
RAID 5
A RAID 5 configuration is similar to a RAID 0 array except RAID 5 deploys distributed parity also referred to as checksum data. Blocks of data are stripped across three or more hard drives and each hard drive contains block level recreation data (parity). In the event of a hard drive failure, parity will allow for the data to be accessed through a dynamic data creation process. The downside to the dynamic data creation process is a reduction in performance until the failing hard drive can be replaced. RAID 5 performs best for supporting read accesses as write operations will be slower while the parity blocks are being updated. Parity data does consume disk space. A three hard drive RAID 5 array will have about the same total data capacity as a two hard drive RAID 0 array.
RAID 10 (0+1)
A RAID 10 configuration also called RAID 0+1 can be implemented in two different methods depending on the hardware being used. The below left configuration is a striped RAID 1 array being replicated and the below right configuration is a RAID 0 array being replicated. A RAID 10 configuration can provide a RAID 0 performance level even with the loss of one hard disk. The downside to RAID 10 is the reduced configuration capacity.
INTEL Controller Support for Different RAID Configurations.
The RAID configurations used in this document are based on the INTEL SATA controller.
See the below table.
NOTE: Even though your system board may have the appropriate Intel controller,
not all system boards will provide RAID functionality.
Background Information for Creating a RAID configuration.
You can create a RAID configuration provided that:
The PC cabinet can accommodate additional hard drive(s) if needed.
The system board has the necessary open SATA port(s) if needed.
A SATA controller that can support the desired RAID configuration.
You can determine the status of your RAID configuration by using the Intel Rapid Storage Technology (IRST) software. If you don’t have this software on your PC then you can download IRST from the Intel web site. I recommend that you use the latest version available from Intel. Background information can be obtained from the IRST User Guide. When you launch IRST, the help topics are an excellent source of information. You can access IRST by going into the Control Panel and select Intel Rapid Storage Technology. You can also access IRST from the lower right Task Bar location. IRST should resemble a hard drive icon and normally it has a green check mark. By default IRST is set as delayed startup so don’t expect to see it active right after boot up. The Intel images being used in this document are from IRST version 11.1.0.1006.
If the SATA controller in your PC is not set to RAID then read this Microsoft article if you are running VISTA or Windows 7. You need to run the MrFixIT script before you reboot your PC in the bios and make the SATA controller mode change to RAID. The script will then allow Windows to choose the correct driver when you reboot your PC. If you plan on using a boot drive image restore then be sure to run the script just prior to making taking your image backup. That way your backup image is set to allow Windows to choose the correct SATA driver.
Before creating any RAID configuration, always make backups of your data and image the boot hard disk to external media such as an USB drive. Additionally, be sure that your imaging product boot disk is functional, particularly if the PC’s boot hard disk is part of the RAID configuration. Its best to use a commercial hard disk imaging product as support and functionality is generally better than the “freebie” software.
Be sure that your PC is running the latest available BIOS. BIOS updates are used to update the Intel ROM firmware. Additionally, check for hard drive and SSD firmware updates.
Summary of preparation steps in priority order:
Backup your data.
Test out your recovery and restore procedures.
Update the following: BIOS, hard drive firmware, SSD firmware
Update IRST
Execute the Microsoft MrFixIt if your PC is not set to RAID mode in the bios.
Create an image of your boot hard drive.
Considerations:
After replacing a failed hard drive, don’t expect the rebuild process to be fast. All of the data that existed on the failed hard drive must be either regenerated using parity data or replicated to the new hard drive.
I recommend that you use an uninterruptable power supply (UPS) when using RAID 5. Cached write data needs to be written to hard drive in the event of a power failure to avoid the loss of data. You might want to consider disabling write back cache if you are not using an UPS. There is a performance reduction by doing so at the expense of improving data integrity.
If you need a RAID array over 2 TB then your PC needs: UEFI bios, 64 bit operating system, GPT formated hard drives. Review this Microsoft article on Windows and GPT FAQs.
Since a MBR formated array will limit the useable space to 2 TB it’s therefore best to use hard drives that are 1 TB or less for RAID 0, 5 and 10.
Consider the data growth rate and the size of the array. The Intel controller will limit the number of hard drives. The size of the PC cabinet and available system board SATA ports will also be growth constraints. It’s not uncommon for a business to experience an annual data growth rate of 20 percent.
If you need a RAID solution beyond the typical consumer level RAID configurations, then you should review the RAID options available from HP.
RAID technology in not infalible so you need to consider backups. A voltage spike inside your PC could render the RAID unusable and unrecoverable. Corrupted data or a virus are other reasons for keeping backups. An external USB connected hard drive might be sufficient for backups.
Throughly test your backup and restore software. Always keep more than one backup copy of your data.
Performance comparisons:
All of the hard drives benchmarked are Hitachi 1.5 TB SATA III hard drives connected as SATA II devices. HD Tune was used to benchmark the seniaros using default settings.
Configuration
Average MB/s
Maximum MB/s
Single hard drive
113
152
RAID 0
222
289
RAID 1
104
142
RAID 5
221
288
RAID 10 (0+1)
220
274
Creating a RAID 0 Array.
If you are configuring the Windows boot drive into a RAID 0 array, then you need to use the Intel option ROM method for creating the array. Tapping Cntl-i at boot up will get you into the Intel option ROM firmware setup utility. Once the array has been created then boot up your image recovery disk and load the array from your image backup.
If you are creating a RAID 0 data only array then you can use the IRST when running Windows to create the array. You can also use the Intel option ROM firmware setup utility. Even though this HP VISTA RAID setup article is dated, it does have some excellent information.
Launch IRST.
You can observe in the above image the status of the hard drives attached to the Intel SATA controller. Now click on Create. Select Optimized Disk (RAID 0) then click on Next.
Configure the RAID 0 array by selecting two hard drives of the same size and click on Next.
Next click on Create Volume.
A warning window will appear. Click on OK.
The new RAID volume is now created. However, you now need to use Windows Disk Management to ready the volume for use.
Creating a RAID 1 Array.
If you are configuring the Windows boot drive into a RAID 1 array, then you need to use the Intel option ROM method for creating the array. Tapping Cntl-i at boot up will get you into the Intel option ROM firmware setup utility. Once the array has been created then boot up your image recovery disk and load the array from your image backup.
If you are creating a RAID 1 data only array then you can use the IRST when running Windows to create the array. You can also use the Intel option ROM firmware setup utility. Even though this HP VISTA RAID setup article is dated, it does have some excellent information.
Launch IRST.
You can observe the above status of the hard drives attached to the Intel SATA controller. Now click on Create.
Select Real-time data protection (RAID 1) and click NEXT.
Configure the RAID 1 array by selecting two hard drives of the same size and click on Next.
Next click on Create Volume.
The new RAID volume is now created. However, you now need to use Windows Disk Management to ready the volume for use.
Creating a RAID 5 Array.
A RAID 5 array will require three to four hard drives. While it is possible to convert a RAID 0 to a RAID 5 array, I recommended that you consider building the RAID 5 array from scratch rather than use a conversion method.
If you are configuring the Windows boot drive into the RAID 5 array, then you need to use the Intel option ROM method for creating the array. Tapping Cntl-i at boot up will get you into the Intel option ROM firmware setup utility. Once the array has been created then boot up your image recovery disk and load the array from your image backup.
If you are creating a RAID 5 data only array then you can use the IRST when running Windows to create the array. You can also use the Intel option ROM firmware setup utility. Even though this HP VISTA RAID setup article is dated, it does have some excellent information.
The following procedure will build the RAID 5 array with three hard drives using IRST.
Launch IRST.
During this create process, I will be using the last three hard drives
listed in the above image under Storage System View. Now click Create.
Select Efficient data hosting and protection (RAID 5) and click
On Next.
Select the three hard drives for RAID 5 and click on Next.
Review the volume creation selections then click on Create Volume.
Review the final warning then click on OK.
Now click on OK and review the final array status.
Creating a RAID 10 (0+1) Array.
A RAID 10 (0+1) array will require four hard drives.
If you are configuring the Windows boot drive into the RAID 10 (0+1) array, then you need to use the Intel option ROM method for creating the array. Tapping Cntl-i at boot up will get you into the Intel option ROM firmware setup utility. Once the array has been created then boot up your image recovery disk and load the array from your image backup.
If you are creating a RAID 10 (0+1) data only array then you can use the IRST when running Windows to create the array. You can also use the Intel option ROM firmware setup utility. Even though this HP VISTA RAID setup article is dated, it does have some excellent information.
The following procedure will build the RAID 10 (0+1) array using four hard drives using IRST.
Launch IRST.
This create process will be using the last four hard drives listed in the above image under Storage System View. Notice that the hard drives are not the same size. Two of the hard drives are 1.5 TB and two hard drives are 2 TB. While it’s recommended to use all hard drives of the same size, it’s not required. The RAID 10 creation progam will pick to two smallest hard drives for the striped pair and then the two largest hard drives for replication pair but not the opposite as the two largest hard drives if used as the striped pair would not fit on the two smaller hard drives for replication. Now click Create.
Select Balanced performance and data protection (RAID 10) and click
on Next.
Select the four hard drives for RAID 10 and click on Next.
Notice that IRST is set to create a RAID 10 volume with the capacity of 2.7 TB.
Review the volume creation selections then click on Create Volume.
Review the final warning then click on OK.
Now click on OK and review the final array status.
Conversion from RAID 0 to RAID 5
If you have a RAID 0 hard disk configuration and you are concerned that a hard drive failure will cause your PC to crash or results in data loss then you might have an option to use RAID 5. A RAID 5 three drive configuration can survive a single hard drive failure but not two failing hard drives. While there are other RAID configurations possible, this document will only be addressing a three hard drive configuration using the Intel SATA controller. Some of the newer HP PCs can accommodate three hard drives and can be configured when ordered with RAID 5.
Observe the below image. This PC has a RAID 0 2.7 TB array. To build the RAID 5 array, you will need to add (configure) an additional hard drive into the array. Click on Manage and then add an eligible hard drive to the array.
Note: all data on the hard drive to be added to the array will be lost since parity and data from the existing array needs to be written to the added hard drive to create the RAID 5 array. Take backups of your existing array in case something goes wrong.
Once you are on the Manage screen then click on Change type.
The following screen will appear:
Select the drive to be included into the array and click on OK.
When the migration process begins, the Status is now indicating migrating and the Type is RAID 5. The hard drive added was 2 TB which meets the minimum amount. BE PATIENT! The migration process will take a very long time for an in place migration to complete.
It’s much faster to delete out the original RAID 0 volume, create the new RAID 5 volume and then reload the original RAID 0 image from your backups. I recommend that you consider
this method verses the in place approach.
Click on Status to show the migration progress.
RAID 0 to RAID 5 Observations
I was able to shut down and boot the RAID configuration before the migration process had completed. The in place migration method was very slow, about 3% per hour and hence my recommendation to use a differnet method. Booting up from different hard drive before the migration process has completed results in a BSOD on boot up.
After completing the RAID 5 conversion, I did receive a message from IRST indicating that one or more volumes is protected against a hard drive failure.
Other RAID Migrations
While there are other RAID migrations options available, they can be platform (chipset) specific. Review this Intel Chipset article on supported RAID migrations. Even though the Intel RAID migration has a safety function built into the process in the event of a power loss or shutdown, it’s always best to have a complete set of up-to-date backups.
The migration process can be painfully slow. The migration time is largely dependent on the hard drive sizes and the number of hard drives involved in the overall migration. In some cases it might be faster to build the RAID array from scratch and then load the data back to the array verses using an in place migration process.
It is possible to increase the overall RAID array (volume) size with some RAID configurations by adding hard drives to the array. The overall size of the array may be limited by how the array had been previously formatted by Windows. Review the information under the Considerations topic in this document.
*********updated August 21, 2013
If you are using SSDs in a RAID 0 configuration then you will need to have the Intel 7 or 8 chipset plus Intel Rapid Storage Technology (IRST) version 11 or higher to get Windows TRIM support to function. The latest version of IRST as of 8/21/2013 that I have seen is 12.7.1036.
*************DISCLAIMER***********
There may be inaccuracies with the information contained in this document so please consider that when using RAID.
*************DISCLAIMER***********
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
Attachments:
RAID for Consumer PCs.doc ‏3761 KB

Great document
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

HT1338 how do you perform a clean install for imac

How to perform a clean install for imac, because I cannot upgrade to version 10.6?

Here are the technical requirements for Snow Leopard:
http://support.apple.com/kb/sp575
If your iMac meets the requirements, then you will have to purchase the Snow Leopard disk from apple:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
To reinstall your OS, insert the original OS disk that came with your iMac and start up the iMac holding the C key. Start the installation process and when you see the menu bar, select 'Utilities'. From the drop down menu, select Disk Utility. Erase the HDD and the continue the installation.
Note that this will erase all data on the HDD so have it backed up before you start.
Ciao.

RAID For iMac

Similar Messages

Maybe you are looking for