RAID MANAGER 6.22 PROBLEM ( DISPLAYING LUNs)

Dears
we r facing a problem in SOl- 8 Raid Manager 6.22 on Hw raid A3500FC controller. WE had share a central storedge between two hosts. from one hosts we are able to import the disk group as well as it also showing in raid manager GUI., but from another host i am not able to see some LUNs , and also one of the raid controller it shows dead, but i can import the same disk group which is laying on that controller. and also i am able to import other diskgroup, so problem is i am getting one controller as dead in raid GUI, and also some LUNs are not appearing in Raid GUI.
If any body help me to sort out this problem, i will be very much thank full for this.
kindly give me solutions on [email protected]
thanks

Similar Messages

My solution (or so I thought) to Power Manager/CPU throttling problems!!!

I have found a solution to all my Power Manager/CPU throttling problems!!! Though there is some good and bad news.
{EDIT: The problem has NOT been fixed, even after latest PowerManager (3.62) and BIOS (1.30) versions. Pretty much ignore anything I say below as the problem is still occurring. You can see my full post here: http://forum.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-Speedstep-not-working-properly-on-battery-...}
Good news: I have NONE of the throttling issues or inconsistent CPU frequency problems I was having before on AC or battery power. Everything, including TurboBoost on battery works! It is completely fixed! (I have no idea how this factors into Lenovo’s statements that TurboBoost is disabled on battery “by design”. There is at least one other post from someone else that also reported TurboBoost was working for them on battery)
Bad news: I don’t really know which one of the many things I tried actually worked. I am sorry I wasn’t more methodical about recording what I did and checking results, but this was my last ditch effort to get this fixed on my own without sending the system in for repair and frankly, I didn’t think it would work. Now that it has worked, I’m hoping my steps can help others.
For anyone interested, here’s what I did… and before anyone says something like “That has nothing to do with managing power/cpu, why would that help?!… etc., please keep in mind I’m just stating exactly what I did. I am aware some of the steps may not be relevant, but who knows… We all know how weird PC’s are sometimes, even the smallest, oddest thing may resolve a problem.So anyway, here goes.
**IMPORTANT** Not sure how many noticed, but there was a new version of Power Manager released a few weeks ago, 3.62. The PM driver seems to have stayed the same. That alone could very well be the sole fix, I’m not sure. You may just want to completely remove PM and PM driver and install the latest version before trying any of the steps below.
1)Made a complete system image via Windows built-in backup feature
2)Disable any 3rd party fan/CPU control utilities (Throttlestop, etc). Make sure they are also not going to run at startup or from a scheduled task
3)Remove Power Manager Driver, then remove Power Manager software
4)Reboot to Windows
5)Remove all traces of the Power Manager drivers/software directories (think it was something like C:\readyapps and C:\drivers.) **For some odd reason after I did this, my wireless stopped working but it resolved itself by the time I was done with these steps, strange
6)Reboot
7)Access BIOS and reset all settings to default
8)Boot into Windows, downgrade to BIOS 1.25 [UEFI: 1.25 - 8BET44WW / ECP: 1.14 8AHT32WW ] via the Windows flash utility. I wanted to downgrade all the way back to 1.06, but the software would throw up some error for any version prior to 1.25 and wouldn’t proceed
9)Reboot to Windows; make sure system booted w/ out issues
10)Reboot again, access BIOS, reset to defaults again
11)Shut down system
12)Disconnect AC power. Remove main battery. Access and disconnect system backup (a.k.a CMOS) battery under keyboard. Discharge residual power in the system (there are various ways to do this, but you could just leave the battery disconnected for a few minutes). Visually inspect the system for anything funky…my system had a slightly but noticeably loose CPU/GPU heat sink/fan assembly power connector.
13)Reconnect backup battery.
14)Reconnect AC power but leave main battery disconnected.
15)Power on. Should get a message indicating “checksum error, system time reset” or something like that.
16)Reboot to Windows. Verified still okay.
17)Downloaded latest BIOS version, 1.26. This time I burned the bootable BIOS flash CD instead of running it through Windows.
18)Restart and boot from disc, flash BIOS to 1.26. Once complete, restart. Verify BIOS set to defaults.
19)Boot back into Windows.
20)Install latest Power Manager driver (1.62 ), reboot if/as prompted. Install Power Manager (3.62), reboot as prompted.
21)Boot into Windows, verified Power Manager was active and working. Verified TurboBoost was working. Restarted system a few times and played around with Power Manager for a bit to see if the different power plans worked and retained the settings, all the while monitoring the Intel TurboBoost utility and PM’s own “power gauges”. Let system Sleep, changed power sources, resumed, etc. Everything was working great.
22)Shutdown, reconnect main battery. Booted into Windows. Again, fiddled with Power Manager for a bit, switching between power plans and AC/battery power. Still worked great.
23)Success!
That’s it. Again, this is not a guaranteed fix guide. These are just simply the steps that I took on my system that resolved the problems many of us are having. Hopefully it will work for others.
T520 4239-CTO | i5 2410M
W520 4270-CTO | 2720QM | 16GB RAM | Quadro 1000M | BIOS 1.30 | PwrMgr 3.62

All I basically did was download and install...
(Chipset driver) http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/oss924ww.exe
(PM driver) http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/83ku14ww.exe
Now, I did chipset first (didnt ask to reboot) then installed the PM driver (did ask to reboot)
I rebooted.... then I went into bios (1.26) and set everything to default... then restarted saving changes...
Since I prefer not using optimus I changed the display settings in bios right after saving the default settings...
Not sure whether or not you really had to go into bios... but everything seems to be working...
My settings in PM is set to Maximum Power in the Advanced tab, 3rd party monitoring tools is TPFanControl and HWInfo64....
W520 (4270 CTO) | i7-2820QM | 16GB RAM 1333 MHz | Runcore MSATA SSD | 2x Kingston SATA2 SSD | Quadro 2000M | FHD | Windows 7

Having problem displaying remote shared objects on flash

hi
I am using red5 flash server and at that side creating a shared object called chatSharedObject
For the client side,I am using openlaszlo platform, but using actionscript 3 classes for the shared object implementation. cilent application is connecting to the shared object on the red5 side successfully(as I see on the red5 logs).
here is the calling code snippet:
[CODE]
<button id="sendButton">send
      <handler name="onclick" method="sendClicked" />
      <method name="sendClicked" args="v=0">
        if (message.text != "") {
    //Debug.write("Message sent!");
    classroot.writeSharedObject(message.text);
    message.clearText();
    message.setAttribute("text_y", 0);
    </method>
</button>
<method name="writeSharedObject" args="message">
[B]//shared object send method is being called[/B]
    this.send("writeMessage",loginScreen.getUsername(),message);
</method>

<method name="writeMessage" args="username, msg">
    //Debug.debug(msg);
    messageArea.addText(username+ " : "+msg+"\n");
</method>[/CODE]
When I generate the flash object and try to use this application, nothing is being displayed although there is no problem on this issue on the development enviroment. Problem causes when I try to run the swf10 flash object.
Is this maybe a flash security issue? Although I have added the corresponding locations as the trusted location on the flash settings manager. Still problem goes on. And I think this is not about the flash player, it might be a special problem about the flash object.
Couldn't find the solution for a week,
Any help would be appreciated.
Thanks in advance
Cem

i can even gointo firefox and chrome and save the shared object. then open my i.e and see that object in the results page. but if i save the shared object in i.e it throws that error on the results page. So i'm pretty sure it must be the flushing of the object. Pasting my save code below:
function makeResult(evt:MouseEvent):void{
      var flushstatus:String = new String();
      gSo.data.o = o;
      gSo.data.c = c;
      gSo.data.t = t;
      gSo.data.c = v;
      gSo.data.u=uid;
      flushstatus = gSo.flush();
      if (flushstatus != null) {
        switch (flushstatus) {
          case SharedObjectFlushStatus.PENDING: //this is incase the user doesnt have enough space
            gSo.addEventListener(NetStatusEvent.NET_STATUS, onFlushStatus);
            break;
          case SharedObjectFlushStatus.FLUSHED:
            redirect();
            break;
function onFlushStatus(event:NetStatusEvent):void {
switch (event.info.code) {
    case "SharedObject.Flush.Success":
      gSo.removeEventListener(NetStatusEvent.NET_STATUS, onFlushStatus);
      redirect();
      break;
    case "SharedObject.Flush.Failed":
      trace ("Shared object storage failed");
      break;
function redirect() {
try{
    var request:URLRequest = new URLRequest('../node/2');// i supply a base parameter to the swf so the redirect works
    navigateToURL(request,"_self");
catch(error:Error){
    trace ("Redirect failed");

RAID MANAGER for X86?

I am currently working on a project , in which I am connecting an x86 W1100Z Sun server, running Solaris 10, to an A1000 through using an LM320 Dual SCSI card.
The theory is to use SAMBA to share the A1000's file systems across a network consisting of Solaris and Windows hosts.
Despite the proper connection (and termination) of the A1000 to the SCSI card , I am unable to see the A1000 from the "format" command.
I am also unable to find a copy of RAID Manager 6.22.1 which will run on an x86 architecture.
Can someone please advise on how to proceed?
Thanks.

Thanks for the info.
I know that Sun doesn't support A1000 any more, and that it is old-school (plus isn't supported on Solaris 10). However, just 'cos it ain't supported, don't mean it doesn't work!!!!
I had the same A1000 hooked onto the same W1100Z, running Windows Server 2003 and it had no problems seeing it (as a JBOD rather than a RAID, but that's not really a problem once you set up the A1000 to manage itself).
I just find it very hard to believe that there would be a curcumstance where Windows could do something / support something that Solaris doesn't!!!!
I'll try hooking the A1000 onto one on my v880's and re-configuring it as RAID 5 using RM6.22.1, then attach it to the W1100Z and see what happens there.
Any more advice would still be appreciated.

Raid manager and format utility inconsistency

Hi,
I have two A1000 module attached to Sun Fire 280 R with X6541A through both channels. Here is raidutil info for (c3t4d0 and c4t8d0)
# raidutil -c c3t4d0 -i
LUNs found on c3t4d0.
LUN 0 RAID 3 381620 MB
Vendor ID Symbios
ProductID StorEDGE A1000
Product Revision 0301
Boot Level 03.01.02.33
Boot Level Date 06/16/99
Firmware Level 03.01.02.35
Firmware Date 08/12/99
raidutil succeeded
# raidutil -c c4t8d0 -i
LUNs found on c4t8d0.
LUN 0 RAID 5 172345 MB
Vendor ID Symbios
ProductID StorEDGE A1000
Product Revision 0205
Boot Level 03.01.04.00
Boot Level Date 04/05/01
Firmware Level 03.01.04.68
Firmware Date 06/22/01
raidutil succeeded!
# lad
c3t4d0 1T04469376 LUNS: 0
c4t8d0 1T03843281 LUNS: 0
Those output actually reflecting the settings,
But what format command gave me is inconsistent with raid manager:
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000004cf092afe,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w2100002037cd9c32,0
2. c3t4d0 <Symbios-StorEDGEA1000-0205 cyl 43084 alt 2 hd 128 sec 64>
/pseudo/rdnexus@3/rdriver@4,0
Select 2 -->partition-->print
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 43083 168.30GB (43084/0/0) 352944128
1 swap wu 0 0 (0/0/0) 0
2 backup wu 0 - 43083 168.30GB (43084/0/0) 352944128
so in format, c3t4d0 is actually reflecting c4t8d0
Anyone can give me a hint,
Thanks,
Wei

Yeah, you probably want to go through rebuilding the device paths. This amounts to removing everything in /dev/osa/dev/dsk, /dev/osa/dev/rdsk, and /devices/pseudo/rdnexus. Then performing
a reconfiguration boot.
If you're uncomfortable with this, open a service call, or look for
the string hot_add, under Infodocs and Symptoms and Resolutions in the Sunsolve search engine.
Another string is "Syncing lad and format".
Good luck!

RAID manager failed!!!!!!!!!!!

hi,
i installed the RAID manager on my server Enterprise 220R, but during the installation it gave me this error:
drvconfig: driver failed to attach: rdriver
drvconfig: driver failed to attach: rdriver
RDAC daemons initiated
WARNING: set_drivers: No arrays were found that are controlled by either the sd or the ssd driver
i have SrorEDGE A1000 connected to the server
PS:at the back panel of the A1000 the "controller active" LED is on..so it whould work, no?!!!
any advice??
Thanks.

Hello,
the A1000 isn't supported under Solaris 10 (by Sun, under service contract, ...), but works.
Rainer Orth and Fredrik Lundholm posted instructions on comp.unix.solaris. This an except from the post
Fredrik Lundholm < ... > wrote:
RDAC stands for Redundant Disk Array Controller Support, and is only
needed for path failover on RSM2000/A3000/A3500/A3500FC. Since A1000
only has a single controller it is not needed. rm6 talks to the A1000
through Lun 0.I had complained loudly during Solaris 10 Platinum Beta when I first
learned about removal of RM6/A1000 support in S10 FCS *without any
appropriate prior notice (i.e.: EOL notices) in S9 Release Notes*.
Unfortunately, this didn't help to bring the support back, but my support
engineer quickly determined that RM6 runs just fine with an A1000.
I later learned that the claimed reason for support removal was that the
A1000 itself had been EOLed before S10 went FCS.
Perhaps in some cases RM6 is looking for the RDAC paths in order to
determine where the modules are? So while the driver isn't technically
required it can still cause issues by its absence?The rdriver won't load in S10:
Nov 21 23:24:47 sequoia krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/rdriver: undefined symbol
Nov 21 23:24:47 sequoia krtld: [ID 826211 kern.notice] 'dev_get_dev_info'
Nov 21 23:24:47 sequoia krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'rdriver'
Nov 21 23:24:47 sequoia genunix: [ID 370176 kern.warning] WARNING: forceload of drv/rdriver failed
Nov 21 23:24:47 sequoia krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/rdriver: undefined symbol
Nov 21 23:24:47 sequoia krtld: [ID 826211 kern.notice] 'dev_get_dev_info'
Nov 21 23:24:47 sequoia krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'rdriver'
But since rdriver and rdnexus are only needed for RDAC (which doesn't do anything useful with the single-controller A1000), I just rem_drv'ed both and disabled RDAC support in /etc/osa/rmparams,
as I had already done in S8:
--- rmparams.rm6221 Mon Nov 21 13:29:22 2005
+++ rmparams Tue Nov 22 00:23:58 2005
@@ -80,8 +80,9 @@
# RDAC driver/Resolution Daemon Failover parameters
-Rdac_SupportDisabled=FALSE
-Rdac_SinglePathSupportDisabled=FALSE
+# Disabled, useless on A1000 without redundant controllers
+Rdac_SupportDisabled=TRUE
+Rdac_SinglePathSupportDisabled=TRUE
Rdac_HotAddDisabled=PARTIAL
Rdac_HotAddIDs:4:5:
Rdac_NativeScsiDrivers:sd:
This way, an A1000 works just fine when connected to an E3000 with 4 x 167 MHz UltraSPARC I CPUs running Solaris Express Build 33, including arraymon and the RM6 GUI and CLI interfaces :-)
I'm actually using it for some ZFS testing, which works amazingly well, considering the old and slow hardware.
Hope this helps.
Rainer
Rainer Orth, Faculty of Technology, Bielefeld University
The instructions worked for me. I did remove the two forceloads (rdriver, rdnexus) in /etc/system as well.
Sideeffect: These changes removed the long delay (about 5-10 minutes) during boot Solaris 9/Solaris 10 too.
Michael

Settings Manager box does not display

I recently uninstalled flash player and installed the latest version. Although flash player works fine, the Settings Manager box does not display. I only have this problem on Firefox 3.6.10, it works fine on IE 8. I am running Windows XP 32 bit.
Flash10k.ocx 10.1.85.3
NPSWF32.dll 10.1.85.3
I have tried uninstalling, rebooting, reinstalling. I have also tried disabling AV and firewall.
Although I cannot see the SM box, I can right click on the white space to access the local settings. Turning off hardware accelleration did not help.
I have also checked for updated display drivers, none available.

I can't really help, just want you to know you're not the only one with this problem. Just saw another thread with the same.. and well.. got the problem here as well.

LaCie Raid manager unable to access localhost:8845 in OS X server Yosemite

I am running OS X server Yosemite. I have an external LaCie RAID Storage box. The RAID manager software that comes with the LaCie communicates settings by accessing the hardware via a web browser (ie. localhost:8845). I am able to access this port on my macbook pro just running OS X Yosemite but when I plug the hardware into my OS X server, that access is blocked.
Can anyone provide me with instructions to allow browser connection to the localhost. I assume it is an apache2 problem. But maybe that is just my guess.
Thank you in advance.

Hi,
Got a reply from LaCie, they are aware of this problem and are working on a permanent fix. In the meanwhile I got a zip file, which contained a terminal.command file from which I have posted the code here, you need to save that file as an executable so you can run it.
As always create a backup first, goodluck!
#!/bin/sh
if sw_vers -productVersion|grep 10.10 >/dev/null
then
`cat << EOF > ~/lrm.conf
LoadModule php5_module /usr/share/lrm/apacheForOs10/modules/libphp5.so
Listen 8845
<VirtualHost *:8845>
ServerName localhost:8845
DocumentRoot "/usr/share/lrm/root"
ServerAdmin [email protected]
ErrorLog "/usr/share/lrm/apacheForOs10/logs/error_log"
CustomLog "/usr/share/lrm/apacheForOs10/logs/error_log" common
LogLevel warn
TraceEnable off
UserDir disabled
</VirtualHost>
<Directory "/usr/share/lrm/root">
    Options FollowSymLinks Multiviews
    MultiviewsMatch Any
    AllowOverride None
    Require all granted
</Directory>
AliasMatch /MSU/(.*) "/usr/share/lrm/root/$1"
AliasMatch /MSu/(.*) "/usr/share/lrm/root/$1"
AliasMatch /Msu/(.*) "/usr/share/lrm/root/$1"
AliasMatch /msu/(.*) "/usr/share/lrm/root/$1"
EOF`
else
if sw_vers -productVersion|grep 10.9 >/dev/null
then
`cat << EOF > ~/lrm.conf
LoadModule php5_module /usr/share/lrm/apacheForOs9/modules/libphp5.so
Listen 8845
<VirtualHost *:8845>
ServerName localhost:8845
DocumentRoot "/usr/share/lrm/root"
ServerAdmin [email protected]
ErrorLog "/usr/share/lrm/apacheForOs10/logs/error_log"
CustomLog "/usr/share/lrm/apacheForOs10/logs/error_log" common
LogLevel warn
TraceEnable off
UserDir disabled
</VirtualHost>
<Directory "/usr/share/lrm/root">
    Options Indexes FollowSymLinks Multiviews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
AliasMatch /MSU/(.*) "/usr/share/lrm/root/$1"
AliasMatch /MSu/(.*) "/usr/share/lrm/root/$1"
AliasMatch /Msu/(.*) "/usr/share/lrm/root/$1"
AliasMatch /msu/(.*) "/usr/share/lrm/root/$1"
EOF`
else
echo "Unsupported Mac OS system version";
exit 5;
fi
fi
if [ -d /usr/share/lrm ]
then
echo "Will update Mac OS apache Server configuration";
else
echo "failed to locate LaCie Raid Manager directory";
exit 6;
fi
if [ -f ~/lrm.conf ]
then
sudo cp ~/lrm.conf /etc/apache2/other
else
echo “Error: Missing LRM config file”;
exit 1;
fi
if [ $? -ne 0 ]
then
echo “failed to copy lm config file”;
exit 2;
else
rm $(pwd)/lrm.conf;
fi
if [ -f /etc/apache2/other/lrm.conf ]
then
sudo mv /Library/LaunchDaemons/com.lacie.WebService.plist /Library/LaunchDaemons/com.lacie.WebService.backup;
else
echo “Error: Missing LRM config file for apache”;
exit 3;
fi
if [ $? -ne 0 ]
then
echo “failed to backup WebService file”;
exit 4;
fi
sudo httpd -k stop;
sudo apachectl start;
echo "Successfully reconfigure Apache server"

Manage Songs Manually problem

I have a recently purchased Nano and it is loading and playing songs fine. I have it hooked up to a USB2 port and driver v7.1 installed. I want to manage my music manually. Following the directions I got as far as the Summary Tab. I am supposed to select "Manually manage music". Problem is - it doesn't display that selection. Nothing regarding manually doing anything. Can someone tell me where I am going wrong?

At the Summary tab, click on the Music tab and it is in there.
Patrick

Solaris version that RAID Manager 6.22.1 supported

I am currently running Solaris 9 operating environment, I would like to know if RAID Manager 6.22.1 supports Solaris 9.
When I search in SUN website, one page mentioned that RM 6.22.1 supports Solaris 9(http://www.sun.com/storage/disk-drives/raid.html) while the other page is different (http://www.sun.com/storage/software/raid_manager.html).
If anyone has RM 6.22.1 running on Solaris 9, please tell me. Thanks in advance.

Yes it work fine.
Just make sure the firmware and patches are up-to date to avoid problems.
Iain

Problem displaying CLOB in text file

Hello All,
I have a problem displaying the content from the database in notepad. When I click on a link on my jsf screen, I retrieve the data and display it in notepad.
I have my text content stored in the database with CLOB datatype. When I look in the database the data looks in the following format:
---------STARTS FROM NEXT LINE-------------
The firm, known for its keen oversight of products, has been the subject of complaints from firms who have had apps blocked from the store. Some developers have complained that the company's rules seem inconsistent.
Some have found apps blocked after seemingly minor updates, or for having content deemed inappropriate by them. In light of this, and after careful consideration, I believe it is unnecessary to sign this measure at this time.
Sincerely,
ABC
----------ENDS IN THE PREVIOUS LINE------------
Now when I display this content onto the notepad, all the spaces and new line characters are lost, and the entire display looks awkward. This is how it looks:
The firm, known for its keen oversight of products, has been the subject of complaints from firms who have had apps blocked from the store. Some developers have complained that the company's rules seem inconsistent.[]Some have found apps blocked after seemingly minor updates, or for having content deemed inappropriate by them. In light of this, and after careful consideration, I believe it is unnecessary to sign this measure at this time.[]Sincerely,[]ABC
All the new line characters are lost and it just puts some junk character in place of a new line.
When I copy the same text onto textpad, everything is alright and it displays exactly the way it is present in the database. I am also open to display the content in html, but in HTML it doesn't even display me the junk character in place of new line. It is just one single string without any line separators.
I am using the following code to put the content into the text.
public String writeMessage(){
   OutputStream outStream = null;
   HttpServletResponse response = getServletResponseFromFacesContext();
   Reader data = null;
   Writer writer = null;
   try{
      response.reset();
      response.setContentType("text/plain; charset=UTF-8");
      response.setHeader("Content-Disposition","attachment; filename="+id+"_Message.txt");
      outStream = response.getOutputStream();
      QueryRemote remote = serviceLocator.getQueriessEJB();
      data = remote.retrieveGovernorsVetoMessage(billId);
      writer = new BufferedWriter(new OutputStreamWriter( outStream, "UTF-8" ) );
      int charsRead;
      char[] cbuf = new char[1024];
      while ((charsRead = data.read(cbuf)) != -1) {
         System.out.println(charsRead);
      writer.write(cbuf, 0, charsRead);
      writer.flush();
   }catch(Exception ex){
      ex.printStackTrace();
   }finally{
      //Close outStream, data, writer
      facesContext.responseComplete();
   return null;
}Any help or hints on resolving this issue would be highly appreciated.
Thanks.

The data is imported from a third party application to my database. It doesn't display any newline characters when I view the data.
But when I do a regular expression search on text pad, I could see that my clob contains \n as the new line character. Is there a way to replace \n with \n\r while writing the data.
Thanks.

Problem displaying picture stored in mySQL

Hi, i just have got problem displaying picture stored in database as BLOB and presented on JSP over servlet. Below is my code i am using to upload file into database, than download it and display again. The result is the picture can not draw inself and there is always only empty picture space on the web page i am displaying. Please help me to find why it is not working, thanx.
servlet uploading picture to database
               boolean isMultipart = FileUpload.isMultipartContent(req);
               DiskFileUpload upload = new DiskFileUpload();
               List items = upload.parseRequest(req);
               Hashtable textFields = new Hashtable();
               byte[] data = new byte[4096];
               if(isMultipart)
                    Iterator iter = items.iterator();
                    while(iter.hasNext())
                         FileItem item = (FileItem)iter.next();
                         if(item.isFormField())
                              textFields.put(item.getFieldName(), item.getString());
                         }else{
                              data = item.get();
               String sqlStatement = "INSERT INTO cds VALUES('" textFields.get("id")"'," +
                                        "'" textFields.get("album") "','" textFields.get("interpreter") "'," +
                                                  "'" textFields.get("gr1") "','" textFields.get("gr2") "','" textFields.get("price") "')";
               String sqlStatement2 = "INSERT INTO pics VALUES('" textFields.get("id") "','" data "')";
servlet to download picture
String SQL =
     "SELECT Picture " +
     "FROM pics " +
     "WHERE id = '" + request.getParameter("id") + "'";
     ResultSet rs = stmt.executeQuery(SQL);
     rs.next();
     Blob blob = null;
     blob = rs.getBlob(1);
     response.setContentType("image/jpg");
     request.setAttribute("blob", blob);
     System.out.println("just above OutputStream");
     InputStream in = blob.getBinaryStream();
     ServletOutputStream sout = response.getOutputStream();
     int b;
     while ((b = in.read()) != -1) {
     sout.write(b);
     in.close();
     sout.flush();
     sout.close();
img tag in JSP
<img src="LoadImageServlet?id=some id>
plus i am using
Tomcat 5.0
mySQL 4.0
debuging in eclipse
thanx for help once more, Libor.

1:
are there any exceptions throws by the jdbc code
2:
is the code in a doGet
3:
you should do a if(result.next())
4:
Is your mapping code working

Management Console Doesn't Display

Hi Experts ,
we are facing issue with Management Console doesn't display after login ,none of the screens shows any user or activity data.
Our DB admin went through the prerequisite list from note 1262933 and everything appears to be correct with the setup.
Regards
VYVadan

Hi. Just to clarify. Is the bpclog table being populated in the appserver db?
Byron

Problems displaying in IE

While I love iWeb's ease of use, it seems to have serious problems displaying on IE. There is really no point blaming IE, since it is the dominant browser and most people who will see our sites will use it. The point of iWeb should be to allow people to communicate broadly and effectively, not just to Mac & Safari users.
Lists do not work well. The indents do not display properly. Text in boxes shift alignment and location. Bullets show up with different sizes. I have had to hand indent and line space all the lists in the sites I make, which is a mess and not scaleable.
See fieldsforkidsmamk.org.
Are there any workarounds or fixes?
The other obvious issues with iWeb are worth noting:
* inconsistent display in browsers -- pages look different in Safari and Firefox, even on the Mac (let alone IE)
* difficulty adding html code
* page names must be identical to nav names, so pages with multiple words (Get Involved) display urls as /Get%20Involved (can't be corrected unless you have Get_Involved as a header.)
* need to publish whole site for any change
* need to publish all sites for each change to any site
* can't change color, display, location, function etc for Nav
I assume everyone is aware of these problems. The question is, what to do? Grin and bear it? Any help, tips or ideas would be appreciated.
Thanks!
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)

* page names must be identical to nav names, so pages
with multiple words (Get Involved) display urls as
/Get%20Involved (can't be corrected unless you have
Get_Involved as a header.)
You can fix this the same way you add html code, by post processing.
* need to publish all sites for each change to any
site
You can fix this by separating your sites into different Domain files so you only publish one at a time.
Contrary to the other response, "encoding" is not connected to the points you made. There is never any need to add a UTF-8 "tag" to an iWeb page. If you see question marks or Â's when your page is displayed on any browser, Mac or PC, then you may need to fix your ftp or server settings.

Problems displaying rtf memo fields

Post Author: Davidm
CA Forum: General
We use Crystal Reports X to run reports on an Access database with a significant number of rtf memo fields. We use Total Access Memo to allow extended use of rtf within Access as our users require the additional formatting capabilities that this offers.
However, there are considerable problems displaying items like bullet points, tables and hyperlinks in the Crystal Viewer with tables in particular coming out in a real mess with all entries in the table being displayed in a list with a small square marking each cell at the end of each line.
Curiously, if you preview the report in the full version of Crystal X, it appears a bit better with the hyperlinks still underlined (bullet points still vanish) and rows in rtf tables are at least presented as a row even if the columns are not ordered and mixed (with no bounding cells visible).
Firstly, is this disparity of end result between full Crystal X Print Preview and the Crystal X Viewer fixable?
Secondly, is the limited handling of rtf tags likely to be solved in the next release of Crystal?

Hi Mathias,
If I caught you correctly, you want to display data in Adobe forms in form of tabel, right?
So, follow the steps:
1. Insert one sub form on your adobe form.
2. Set its type as "flow content" in object->subform property.
3. Set flow direction as "Table".
4. Insert another subform inside this subform.
5. set its type as "flow content" and flow direction as "Table row".
6. Now, choose binding tab, and there check "repeat subform for each Data item check box" and specify min. count for your rows.
7. Now, insert your column fields inside this sub form once.
8. Format its look and feel as you want.
When you run this application, it will show you multiple data as table on Adobe form.
Regards,
Bhavik

RAID MANAGER 6.22 PROBLEM ( DISPLAYING LUNs)

Similar Messages

Maybe you are looking for