RAID or Server Backup?

I am working on medical office in which they have a RAID 1 for the operating system (Windows Server 2008 R2) and a solo drive for the databases (2). The second drive does not have any RAID and I was going to to buy a new HDD to do another RAID 1, but I found
out that the second HDD was a WD Green drive and should not be used for a RAID.
At this point I called WD and they confirmed that the Red ones are the ones for RAID but then I will have to buy 2 drives and move the data from the green one to one of the red one to make the RAID.
In the other hand I can use the server back-up tool to back-up the data but I don't think that's the best way to do it.
Is it better using Server Back-up or do the RAID Mirror?

the idea of raid is it would give you redundant data if the existing hard drive became corrupt or crashes backup will not do that for you, you should always have a backup whether you have raid or not. so your question is kind of off base.
If you are already using green drive for a data drive you probably are not getting very good performance out of it so upgrading to two red drive would be the best solution because you would get better performance out of system, but if you must you could
get anther green drive and raid them, they don't recommend it but it will work, you would want to look for the same model that you currently have so they play together nicely.
Another option would be to not actually mirror but put the second drive in and use NFS or some other sync tool to make a copys of the data between them real time, this will work if you are talking about non exchange and non sql data on the data drive.

Similar Messages

Can Windows Server Backup spread a single backup job across multiple disks if they are not set up as a virtual disk?

This may be a dumb question, but I can't seem to find any definitive information after having done many, many searches. Short question is - can Windows Server Backup spread a single backup job across multiple disks if they are not in a storage
pool or some other RAID/JBOD structure?
Background:
I'm running Server 2012 Essentials with all Windows Updates installed. I have been backing up approx 2.8TB of data (Bare Metal Recovery, C:, S: (shared folders), and system reserved) for the past year+ onto a storage pool made up of two-2TB external
USB drives. Backup is slow (takes approx 1.5 days to complete), but generally works. Not surprisingly I was constantly getting capacity low messages so I decided to increase my backup storage pool by adding a 3TB drive and another spare 750GB drive
for a total of 7.75TB. Instead of having four separate external USB enclosures, I bot a 4-bay enclosure - Startech.com model #S3540BU33E to simplify this (or so I thought!).
The first problem I had was adding the two new drives to the existing storage pool. I think that is because the Startech uses a JMicron USB controller that reports identical uniqueid's for all drives so only one shows up in the GUI interface for creating storage
pools. After doing research on this, I set up a new storage pool and virtual disk using all four drives via Powershell and thought I was good. However, when the backup ran, it failed after filling the first drive, saying there was no remaining capacity. In
reality there were three remaining empty drives and there storage pool reported almost 5TB of avail capacity. I assumed this was due to the identical uniqueid issue so I decided to try a different tactic.
Instead of using a storage pool that combines all four disks into one virtual disk, I just added each of them to Windows Server Backup as individual drives thinking it would manage them collectively. I.e., when a drive filled up during a particular backup,
it would just start using the next drive and so on. Apparently this was a foolish assumption because the backup failed again as soon as the first disk filled up.
So now I don't know if this is still an issue with the identical uniqueid's or if Server Backup actually can't spread a single backup across multiple individual drives that aren't in a pool or other virtual disk implementation. Hence, my original question.
My guess is that it does *not* spread them across individual disks, but I just wanted to get confirmation.
Thanks

Mandy,
Thank you for following up on my question.
Unfortunately the article you referenced doesn't address what I am trying to accomplish.
The article focuses on saving the same backup job to multiple disks and rotating the disks between on and offsite for enhanced protection. However, it still requires that an individual backup job fits on a single disk.
What I am trying to determine is if a single backup job can span across more than one physical disk (during the backup process) without those physical disks being in some type of virtual disk implementation (e.g., storage pool, RAID, etc.).
Thanks,
Gerry

Lost Windows Server Backup, historical backups. Backup seems to have restarted from a fresh full backup. How can I get to those old backups?

Scenario with very bad outlook:
Friday-16th, early AM. Win2008 SBS Server crashes due to RAID5 issues, bad disk. Found that server was NOT configured with hot spare and for some reason the controller had marked a 2nd disk bad..which turned out not to be the case.
Had a single external USB backup drive being fed by Windows Server Backup. Obtained support from vendor and was able to regain the RAID and start the server.
Soon became apparent that Exchange was having serious issues - edb was corrupt and not mountable. Restore edb from backup, repaired and was eventually able to mount. Then found it had Hub Transport issues. Researching that when it was noticed
NTFS events being logged at a high rate. Restarted system to repair the filesystem, which was successful.
After the FS repair, found the Exchange edb, new edb I had created to migrate mailboxes to, and public edb all 0k in size.
Restored the edb again and commenced repair, which eventually read Clean Shutdown again...but could not get it to mount. Exchange was having various issues seemingly with AD.
Changed backup time to avoid a backup that day, as did not want to back up while RAID was rebuilding - had inserted a replacement for the failed drive.
Monday/19th, was advised that much of the data was corrupt. This is an accounting firm and relies heavily on their data, especially since the last time their ext USB was rotated was Nov6 2013. They now have no year end backup, nor a backup from
post tax season 2014.
Is it possible to recover any of the historical backups prior to the full backup/restart?
Oh, and all Shadow Copies for the impacted volume/drive are gone.
Thank you.

Hi,
Please use the “Wbadmin get versions” command to check the backup versions on the server. If there is only latest shadow copy, you may not recover any of the historical backups prior to the full backup.
Backup Version and Space Management in Windows Server Backup
http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Backed up files partially disappear after restore (Windows Server 2008 R2 - Windows Server Backup)

Dear all,
I am experiencing a problem with "Windows Server 2008 R2", using Windows Server Backup.
Here's my setup:
Server: RAID 5 Disk setup
Backup:
By using Windows Server Backup (within Windows Server 2008 R2), C: and D: were fully backed up, with "System State" and "Baremetal Recovery" options selected. Backup went okay without any errors.
Restore:
By using Windows Recovery Environment (booted from Windows Server DVD), C: and D: were fully restored to the original partitions with "System Recovery" option found within Windows RE (without re-formatting partitions during restore). Restore
went OK without any errors. Rebooted, and system has been running fine.
Problem:
After the restore, the system itself seems running OK; no BSOD, no crash, no visible errors.
However, our client insisted some files (around 6 to 7) which are related to the propriety software has "disappeared" right after System Recovery.
Question:
Since Windows Server Backup is using "Volume Shadow Copy" technology which enables "live backup" of the running system, is it possible that some files will disappear (=restore error) after
System Recovery?
I cannot really find any errors or warnings related to Windows Server Backup in the event log, through. No Windows-backup errors. No VSS errors, too.
Do anybody have experienced this kind of problem in the past? Any suggestion will be greatly appreciated.

Thank you for your reply, Ms. Mandy.
To make things clear, let me explain to you briefly:
1. The "missing data" was backed up with "full system backup".
2. After a system restore from the above backup image, as you mentioned, partitions has been overwritten with the partions' backup data in the Backup Data Set taken by Windows Server Backup. No error with backup. No error after restore, and reboot - system
has been running fine.
3. Although there was a report that the affected files(about 7 java exectables) were missing after the above restore operation, other aspect of system was running fine at the time of the report.
4. I have checked the original backup data set - and voila, there ARE files which seems to gone after restore.
5. When I used Windows Server Backup "on" Windows Server 2008 R2 normal environment (= NOT Recovery environment from DVD) and selectd ONLY these affected files to restore, these files could be RESTORED successfully, without any errors. SO... data
was property backed up.
> The recovery will overwrite the partitions so files created after the backup point will be missing.
I understand, and this is not the case this time, because the affected files are already present in the backup data set (= I have mounted the backup data as VHD, and I could clearly see them present in the mounted VHD file)
Plus, these files are completely restoreable via "selective file restore" in Windows Server Backup.
Things I want to know/confirm:
> The recovery will overwrite the partitions
If I understand this correctly, in case that the files in question are already present in the backup data set, these files SHOULD be restored after full system restore, right? (If these files could not be restored, Windows Server Backup SHOULD show some errors.)
What do you think, Ms. Mandy? :)
Jo

Bare metal restore of full server backup fails with RPC error 0x800706BA (server 2012)

With Windows Server 2012, after creating a successful windows server backup (full server), I am unable to do a bare metal restore of the system.
EFI System Partition, C:, D: are the volumes on a single array (Raid 5).
Loading WinRE and launching re-image, the full server restore stops after completing the C: restore just after beginning the D: drive restore (data volume) with the error with the message about RPC error 0x800706BA, unavailable.
The system will not boot as a result of the failure.
What may be causing this?
[edit]
I think I have two things working against me here... one, Volume Shadow Copy service wasn't running in WinPE and two.. the D: volume contains data deduplication.
I think this is causing some of my problems.
Is there an additional service that I need to start in WinPE to get a volume that was deduplicated restored perhaps using wbadmin?

Hi,
Thanks for the reply Shaon.
The hardware system is identical; however, I am increasing storage capacity from 12TB to 16TB. Basically, the system is the same, just new hard drives (4x4TB versus 4x3TB). Drives are all identical enterprise class drives and I am actually using
the same system (backup, swap drives then restore).
I tried both using the WinRE restore (re-image) with the backup set, and tried using wbadmin. Both produce same RPC unavailable messages (although using the GUI based tool via WinRE provides the additional error code #).
I do not have any idea what to look at to try to figure this one out.
[edit]
I was just informed of this posting:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/147efccc-e0e9-4458-852e-c3a44ae5cb64/the-system-image-restore-failed-error-details-he-rpc-server-is-unavailable-0x800706ba?forum=windowsbackup
and in my case, this lab server does in fact act also as a DC as well as a file server... do I need to spin up a secondary controller (perhaps in a VM on another machine) to do this restore?

Windows Server Backup - 0x80042407, seriously?

I installed server 2008 on a test server with 4x250GB drives in a RAID5 array.
Windows was installed on a 60GB partition, the rest of the array was left as free space.
After installing updates and drivers, I decided that I wanted a RAID10 array.
This would give me a chance to test the restore functionality of Windows Server Backup.
I did a full backup with Windows Server Backup to a network location.
After reconfiguring the RAID array I started the recovery process.
Here is the issue. right when the restore should start, I get an error....
The Windows Complete PC Restore operation failed.
Error details: The disk that is set as active in BIOS is too small to recover the original system disk. Replace the disk with a larger one and retry the restore operation. (0x80042407)
I've tried creating partitions of all sizes and leaving the disk blank, same error.
I even set the disk as the first boot device in BIOS.
I've read elsewhere that the disk must be the same size or larger. That just seems like a bad April fools joke to me.
Can anyone give me some insight on this issue?

Hello Jason,
Thank you for your reply.
For your further concern, this same or bigger disk size requirement is by design for Windows Server 2008 and Windows Vista. As a suggestion, we recommend you use a bigger disk for Bare Metal Restore.
Currently we cannot edit the backup size. However, to fulfill your demand, there is a possible given workaround to restore the backup to smaller disk size.
Workaround: To recover the System manually using Volume recovery
By using this workaround, at minimum the OS critical partitions should be of the same size for the volume recovery.
To recovery the System manually from Windows Recovery Environment (when BMR – Complete PC Restore is not working), user has to recover all the partitions individually and then set the BCD boot entries.
Please follow the below mentioned steps:
1)    Get the backup version from the backup target.
2)    From version, get the size of partitions at the time of backup.
3)    Recreate the partitions manually with same or more size.
4)    Perform volume recovery of Individual volumes.
5)    Set the Active bit for System volume.
6)    Fix the Boot entries.
Please replace anything marked under <> with actual values. The yellow marked entries are for sample only. We have to pick the actual values from his system. Also assuming the Boot disk is disk 0 in this case.
Open Command prompt:
1)    Do wbadmin get versions –backuptarget:<X:>.
a.    Select the version id from. E.g. Version identifier: 02/11/2009-09:14
Note: If the backup target is network share, then run “start /w wpeinit” to enable networking.
2)    Do wbadmin get items –version:<versioned> -backuptarget:<X:>
a.    This will give the list of volumes that were backed up and their sizes.
3)    Using Diskpart, recreate your volumes of the same or more size. Assume that the Boot disk is Disk 0 and is empty. Disk 0 is the boot disk and is the first disk in BIOS boot order.
If the required partitions are already present then skip the steps below.
a.    Diskpart.exe
b.    List disk
c.    Select disk 0.
d.    Create par primary size=<size>
e.    Format fs=ntfs quick label=”OS”               (Format the OS partition with NTFS)
f.     Assign letter=D                 (assign drive letter D: to OS volume)
g.    Do the same for all the volumes you want to recover.
h.    Detail disk
i.      It lists the newly created partitions.
4)    To recover the volumes one by one,
a.    Do wbadmin get items –version:<versionid> -backuptarget:<X:> .
b.    Select the volume id or drive letter for OS volume that was backed up.
E.g. C: corresponds to the OS volume at backup time.
c.    Wbadmin start recovery –version:<versionid> -backuptarget:<x:> -itemType:Volume –items:C: -recoverytarget:D:
d.    Do the same for all the other volumes. Make sure that minimum space requirement is met.
e.    Set the active bit of System volume from Diskpart.
f.     Diskpart.exe ->
                                          i.    Select volume D:
                                         ii.    active
5)    Reboot the OS and boot back into WinRE as OS is not yet bootable.
6)    Select Startup-Repair option to fix the BCD boot entries.
7)    Reboot and OS should be in a bootable state.
8)    If OS is still not bootable, use bcdedit.exe/bootrec.exe in WinRE to fix the BCD boot options.
I understand that it will be reasonable to edit the backup so that the bare metal restore process can accept the smaller disk size, our product team are aware of this desired functionality and will definitely keep this in mind as future product development continues.
Thanks for your understandings.
This posting is provided "AS IS" with no warranties, and confers no rights.

Re-create a mirrored RAID after restoring backup

As a follow-up on my thread http://discussions.apple.com/thread.jspa?threadID=833779&tstart=0 :
On a XServe G5 with OS X Server 10.4.8 and a two-drive mirrored RAID I do backups by cloning the RAID onto an other disk (in bay three) using Intego's Personal Backup X4.
Now it may happen that there is some kind of data loss or an other emergency case that urges me to boot from the cloned HD. I would do this by simply removing the HD in bay one and replacing it with the clone, then restart the server (second HD of the RAID1 remains in bay two).
The information I got until yet says that the mirrored RAID is then broken and needs to be completely re-build. Is this correct so far ? I originally assumed that the clone "remembers" that it was part of a RAID system before and rebuilds automatically with the second HD still in place. Very likely wrong ?
So if I need to rebuild the clone from scratch, which steps do I follow exactly ? As far as I understand I have two choices:
(1)
Via command line (as root): diskutil createRAID mirror <set name> Journaled HFS+ <device identifier disk1> <device identifier disk2>
<set name>: Would be volume name of the RAID to create, right ?
<device identifier disk1/2>: What is this and how to determine ?
(2)
Via disk utility: Select one disk (first line on the left disk/volume list, e.g. "76,2 GB Hitachi 123ABC"), click in "RAID" tab, do settings.
Then drag & drop each harddisk from the left to the right list (again, the first line of each disk entry). Finally creating the RAID by clicking at the button "Generate".
I'm not sure, although I would likely handle this with the disk utility, it appears easier to me using the diskutil command in terminal. But maybe I simply lack of explaining the GUI... let me know how to post images and I will add some screenshots here.
Well, if my proceedings are too complex and there is something easier, please let me know. I'm open for everything.

>This part of my question originally referred to the fact that when booting from the cloned backup in bay one while still having the second disk of the old RAID in bay two, it could occur that the OS rebuilds the RAID by using the data on the remaining mirror disk in bay two, couldn't ? This would be not desired, because the data on that disk would be no longer usable. So just for clarification, not that we have a misunderstanding in this point.
I see what you're getting at, and I don't believe it's an issue.
Given three disks, disk0, disk1 and disk2, where disk0 and disk1 are mirrored and that mirror fails, the OS will not rebuild the mirror using disk1 and any other disk. It won't arbitrarily choose any disk in the system to rebuild on - you have to specifically mark as disk as usable, either by enabling auto-rebuild and adding a spare disk to the array, or by using 'repairMirror' and specifying the disk to use.
In any case, if you reboot the system from disk2, there is no way it will rebuild the array using that disk since that disk is the active boot drive and can not be unmounted (which is necessary before being added to an array).
So, no, there is no chance that the system will auto-rebuild the working half of the mirror with your backup disk.
>Okay, let's summarize... I would follow this procedure in order to boot from the cloned backup and build a new RAID:
1. Remove both disks from the XServe.
2. Insert the cloned backup disk and boot.
3. Open terminal, su root, execute:
diskutil enableRAID disk0
diskutil repairMirror disk0 disk1
This is not correct.
When you 'enableRAID disk0' the OS will create a new, virtual disk (likely 'disk2'). This is the mirror array (currently consisting of only one drive), and it is this virtual disk that you need to specify as the mirror to be repaired.
So, given disk0 and disk1 as being the physical disks in the server, the steps are more likely to be:
<pre class=command>diskutil enableRAID disk0</pre>
(this creates a new, virtual disk2)
<pre class=command>diskutil repairMirror disk2 disk1</pre>
(this adds physical disk1 to the degraded mirror disk2)
When complete disk2 will be a mirror RAID consisting of disk0 and disk1.
>When using "diskutil enableRAID", I cannot determine the label of the RAID as I would do with "diskutil createRAID" (in command line manual this is referred to "setname"). Which setname does my "new" RAID system get, a default one ?
You know, I have no idea
I've never noticed this before. If I think about it, I'd guess that the setname is based on the source disk name.
>> If you add a drive to a RAID it gets reformatted, so it doesn't matter what's
on it.
Even if it was part of the RAID system before (the original disk in bay two) ? It could still have the RAID information on it and try to rebuild RAID when getting mounted, couldn't ?
No. See my comments above. The OS won't auto-rebuild unless a) the RAID is set to auto-rebuild and b) there is a spare disk in the array. If either of those two conditions are not true then the disk acts as a degraded mirror and can be reformatted/reallocated as you like.

Mac Mini Server Backups

Dear all,
I am using a Mac Mini Server for filesharing, iCal, etc. I want to make sure all data is safe, so I want regular backups. The Mac Mini Server is set up to work on Disk 1 and backup on Disk 2. But in case the server is stolen, crashes or something similar this set up is pretty useless.
Therefor I am investigating different possibilities to back up safely. I have two option I want to investigate further, however I'm not sure what's possible and what not.
1. I have a second Mac Mini Server available. Is it possible to have the primary Mac Mini Server backup on the secondary Mac Mini Server?
2. Is it possible to run backups on an external server? E.g. FTP.
Thanks in advance!
Nick

This is what I would do.
I would repartition the server to use software RAID 0.
What this would do is mirror both hard drives. Lets say one day that one of the hard drives failed, its ok because all you would have to do is put a new hard drive in and you are back online.
This means you will not have to deal with any down time.
For backups you could run Carbon Copy Clone to an external hard drive. This will make an exact clone of your hard drive that you can even boot too!
You can bring this off site for better data protection.

Restoring Server Backups

Hi I'm having trouble restoring a backup of windows server 2012 essentials. My setup is:
1 -160gb hard drive with the operating system on it
2 - 2tb hard drives with raid 0 to hold all of my data
1 - 4tb hard drive that is only used for backing up everything
I ran into trouble when the 160gb hard drive died. I replaced the hard drive and re installed the operating system but somehow installing the new hard drive broke my raid causing me to lose all of my data. "No worries" I thought to myself I have
been doing twice daily backups of everything since I put this server together.... My problem is restoring the backups. I have two backups listed in the windows backup software from the day before all of this went down, they both say completed successfully
and have no errors listed. If I go to the folder I have vhdx image files of the three partitions that get backed up every day. When I go to restore one of three things happens.
1. If I try and restore the entire volume using the recovery wizard I get the error "Windows Backup cannot find a shadow copy of the backup set on the storage location"
2. If I try and restore just "files and folders" I can't expand any folders to see the files/folders. All of my folders say "Unable to browse *foldername*. Windows backup cannot find a shadow copy of the backup set on the storage location."
3. If I restart and try a recovery from the instillation disk I'm not able to see the recovery files at all.
I'm able to mount the hard drive images and two of the images work just fine but not the third (The one I really want with all of my data on it). When I mount the third it tells me the file system is RAW and would I like to format (Always chose no). I have
scanned the image file when it was mounted as RAW with R-Studio. R-Studio finds all of my files but is only able to give me back less than a third of them. Scanning the broken raid doesn't give me any files.
If anyone could help me out I would be eternally grateful. I stand to lose a ton of data including almost all of the videos and pictures of my kids. I thought I was doing everything right but for some reason my back ups wont go....
Thank You!

Hi,
Firstly, please refer to the article below to troubleshoot VSS issues:
Troubleshoot VSS issues that occur with Windows Server Backup (WBADMIN) in Windows Server 2008 and Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ee692290(v=ws.10).aspx
In the meantime, as the file system of the third hard drive is RAW, you need to convert RAW file system to NTFS.
For more detailed information, please refer to the articles below:
What is this Raw File System
http://blogs.technet.com/b/ganand/archive/2008/02/22/what-is-this-raw-file-system.aspx
If the article is not helpful, I would suggest you use third-party softwares to convert RAW file system to NTFS.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Mount vhdx file from Windows Server Backup 2012

We have a 2012 server with a network share that other servers backup to using Windows Server Backup. To view the files from a windows 2008 r2 backup .vhd file all I have to do is open it in windows explorer and it mounts as a drive and opens. When
I try to do the same with a 2012 backup (.vhdx) it tells me "you don't have permission to mount the file" but if I open disk management I can see the volume, and if I right click on it and select "Change Drive Letter and Paths" and add
a drive letter, then I can browse it. I get the same issue using mount-vhd in powershell.

Hi Adm1nMikeW,
Please try to use disk management --> action --> attach VHD (this way will avoid the error message).
The root cause is the attribute "nodefaultdriveletter" of the backup vhd was not set to "no".
You can try following setps :
1. in cmd prompt type diskpart
2. recognize the problematic volume you want to set via list volume
3. run command select volume "volume number"
4. run command attributes volume clear nodefaultdriveletter
then detach it and reattach the disk again .
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

[Windows Server 2008 R2] [Windows Server Backup] How to remove an old backup set

Hello,
long time ago I made a backup of some files of a server on a network location running manually a command like this one:
"wbadmin start backup -backupTarget:\\Server1\Backup\MyServer\wbadmin_Effe -include:F: -user:DOMAIN\myself -password:******** -quiet"
Now this network location is no more available because that machine is definitely broken.
I have no problems to run and create backups on a local drive or on other network locations.
My only problem is that now, in the main window of Windows Server Backup, when i click "View details" under "All Backups", I can still see that backup as the oldest available... that's a bit annoying.
It appears also if I run the command "wbadmin GET VERSIONS".
Does anybody know how can I remove this backup version set from my server?
Thanks,
Alex.

Hi Alex,
The command will remove all backups existed on your server. If you cannot get Shadow Copy ID and there are "good" backups existed on you server, you could not remove the old backup versions.
How to completely delete the backup file from network share and clean up the backup version for the server?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2ecc1c25-9308-4c50-be37-9762913cab61/how-to-completely-delete-the-backup-file-from-network-share-and-clean-up-the-backup-version-for-the?forum=windowsbackup
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to schedule multiple backup job through windows server backup in windows server 2008 R2

hi expert,
need your help, In my small environment I am using windows 2008 R2 as a domain controller. and installed windows server feature for backup.
Now i want to create backup at a different time.
1. System state backup at 5.00 PM on saturday only
2. finance and hr data backup on daily basis at 5.00 PM.
so how i create different job schedule through windows server backup.
Regards,
Triyambak
Regards, Triyambak

Scenario #1
The following command will create a Task Scheduler task named
DailyFolder1Backup with the start time of 23:00.
This task will run DAILY with the HIGHESTprivileges. It will run the Windows Server Backup CLI to backup
g:\folder1 to target volume
F:.
SCHTASKS /Create /SC DAILY /TN
DailyFolder1Backup /RL HIGHEST /ST 23:00/TR
"wbadmin start backup –backupTarget:F: -include:g\folder1
-vsscopy -quiet"
Scenario #2
The following command will create a Task Scheduler task named
DailyFolder2Backup with the start time of 24:00.
This task will run DAILY with the HIGHESTprivileges. It will run the Windows Server Backup CLI to backup
h:\folder2 to target volume
F:.
SCHTASKS /Create /SC DAILY /TN
DailyFolder2Backup/RL HIGHEST /ST 24:00/TR
"wbadmin start backup –backupTarget:F: -include:h:\folder2
-vsscopy -quiet"
Please feel free to let us know if you have any question or concern.
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

One or more hard drives in Server Backup are not connected

A year ago I moved from Windows Home Server to Server Essentials 2012 as a backup solution for my simple home configuration - 2 Windows 7 Professional desktops. It was a perfect solution and works flawlessly - and has saved my tail on numerous
occasions.
The configuration is simple - I have a internal SSD drive from the operating system and a few other applications and (2) identical 4 Terabyte internal hard drives setup as a single storage pool - configured as a 2 way mirror. Every few days when I
log into the Windows Dashboard and check out the alert viewer, I have a single error - "One or more hard drives in Server Backup are not connected". When I follow the instructions - open the dashboard, click storage, hard drives - I see a single
C drive (which of course is connected - it runs the OS) and a single D drive - the storage pool. Clicking on the D drive and "Advanced - Manage Storage Spaces" shows my single pool (a green OK) and the 2 physical drives (also a green OK).
There are no other drives attached to this server - no external USB drives, external hard drives - nothing. Why is WSE showing this message?
Matt M

Go into the Server Backup Selections and reconfirm what is selected, then save.
If it persists, change the selection (remove a folder) and save, then go back in and correct it, then save.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Server 2008 R2 Windows Server Backup. "Error in backup of Hyper-V.vhd during read: Error [0x80070001] Incorrect function.

Hello,
We are currently using Windows Server Backup to backup three Hyper-V guests running on a Windows 2008 R2 host. Two guests are running Server 2008 R2 and one is running Windows 7. I have the backups going to a dedicated external disk drive.
WSB backs up the two 2008 R2 Hyper-V guests just fine. However, when attempting to backup the Windows 7 Hyper-V guest, I receive the following error:
Error in backup of <Windows 7.vhd> during read: Error [0x80070001] Incorrect function.
I ran a "vssadmin list writers" and all the VSS writers showed "Stable" with no errors. I have plenty of space on the external drive as well. I've read this article:
https://support.microsoft.com/kb/973455?wa=wsignin1.0#workaroundissue12 except that doesn't seem to be what I'm experiencing here.
Anyone have any suggestions?

Hi,
As the other 2 guests could be backed up correctly, the issue should not be the Windows Server Backup feature.
First please refer to this article:
Backing Up and Restoring Virtual Machines
http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx
Please check if all following requirements are met. Specifically please check if Integration Service is installed.
Backup (volume snapshot) Integration Service is installed and running in the child VM. The service name is "Hyper-V Volume Shadow Copy Requestor".
Windows 2000: Backup Integration Service is not supported.
The child VM must be in the running state.
The Snapshot File Location for the VM is set to be the same volume in the host operating system as the VHD files for the VM.
All volumes in the child VM are basic disks and there are no dynamic disks.
All disks in the child VM must use a file system that supports snapshots (for example, NTFS).
If you have any feedback on our support, please send to [email protected]

[Forum FAQ] Cannot perform a backup schedule via Windows Server Backup and receive "The system cannot find the path specified." Error

Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

good

RAID or Server Backup?

Similar Messages

Maybe you are looking for