RAID Problems: ESXI 5.5 on TD340 Server

Hello all, I am trying to set up a very simple (relative to ESXi) installation of ESXi 5.5 on a single Lenovo TD340 server. The problem I am encountering is that, though ESXi will install, it proceeds to fail to boot. My specs are as follows: RAID 0 (yep, you read that right. Single 2TB SAS hard drive, not going to be used in a production enterprise environment)56 GB of RAMESXi 5.5, ESXi 5.5U1, and ESXi 5.5U2 are all availableLSI MegaRAID Software RAID BIOS Version SCU.1108131348RWhen I insert the ESXi installation CD, it reads the hard drive with no problem and all of the RAM as well. In fact, it installs without a hitch whatsoever. The problem occurs upon reboot, when it actually seems to completely lose the previously configured RAID 0 virtual disk. The hard disk is still seen as plugged in but as if there was never any configuration made; the drive basically becomes unbootable. I have used the Easy Setup CD and noticed that it lists the LSI OB SAS Raid 300 controller as being unsupported for ESXi 5.5. Is this the root of my problem? Is there a way to fix this? For instance:
Would this driver solve my problem with a custom ESXi CD?
LSI VMware Drivers
Should I just break down and use either a USB drive to boot ESXi or install a SATA hard drive? Any insight would be greatly appreciated. Thanks!

vcwise-zach,
I apologize for the issues you are having running VMware. You are seeing this problem because VMware does not support on-board RAID.. VMware states in their documentation that if you require a RAID setup, that you must use a discreet / hardware RAID controller from LSI or Adaptec, etc.
There is a post in the VMware community regarding this as well as documentation from VMware itself which states which hardware is required if you choose to use VMware in a RAID configuration.

Similar Messages

Mac Pro small business server; RAID problems

Our company runs on a small network consisting of 8 workstations (iMac's) and 1 dedicated server: a 1,5 year old Mac Pro running OS X Snow Leopard Server. This machine has 2 hard drives of 1TB each, running in a mirrored RAID configuration. This configuration holds the OS X system and the data. Because the hardware RAID was so expensive, I chose the software RAID controller OS X offers instead.
All this ran fine for the first 1,5 years, until yesterday... I ran an OS X update and the Mac Pro needed to restart after that. After the machine rebooted, I got a gray screen with the blinking folder-with-questionmark icon telling me no bootable drive could be found. I tried booting from the install DVD and that worked, but after I started DiskUtility to check the hard drive for errors the computer did not find any hard drives, only the DVD. Luckily I made a backup (clone) to an external Firewire drive just before the update and at this moment the server is running from this backup, so no harm done.
How can I solve this problem? Why can't my Mac Pro find it's drives? Is it possible to circumvent the RAID software and boot from one of the two disks or are they formatted in a special way?
My second question is on how to prevent this in the future. I still think the Mac Pro RAID controller is way too expensive, but I read that it's not that smart to use (software) RAID as a bootable drive (of a server). Because of this, I am looking at external options, like the SmartStor NSx600 Series through Firewire. Could this be a better way to go then the software RAID OS X offers or does this external solution have other disadvantages? (speed? reliability?)
Thanks in advance for your input!
Mario van Ginneken

Who is your ISP...?
What is the ip address of the modem..?
What is the ip address of the router..?
Where is the switch and server connected...?
What is the ip address of the server...?
How you are able to see the Wireless network if you have disabled the SSID broadcast on the router..?Re-check the settings on the router.

Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?

Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support

SATA RAID problem on K8N Neo2 Platinum (nForce3 ultra) & winXP x64

I entered on MSI driver dowload page, put my model, and i found out that the RAID driver for win x64 wasn't released (nforce3 ultra), but in the same page was the driver for the nforce4, so I supposed it was compatible. I made the driver disk. press F6 and he askme for the drivers, ok, i introduce BOTH drivers, he detects perefctly the SATA RAID (stripping) format the disk, copy the files and ask me for some .CATof teh raid driver that wasn't on the zip file.... omit files, reboots, completes the instalation, but on the first boot of win x64 when it's just about to show the windows screen, a bue windows, and resets the pc so fast that's unreadable. fail safe start.. same crash.
I Installed win on an IDE and it run prefectly... In th other hand... without installing any driver the windows instalation recognices the SATA drives, but not the RAID. Maybe I just got to install the raid driver but not the SATA driver... the nforce3 driver form nvidia.com is pretty old... The real funny is that when i installed winXp x64 BETA i hadn' any problem... (winXP 64 doesn't admit the 32 bit driver=
Which driver i'm supposed to install? to INSTALL winxp64 on a SATA RAID and make it boot from there?
Thaks a lot

HI! i'm the one wih the raid problem on a k8n neo2....
That's what a i Did.. i unpacked the exe and copy the files in a floppy... question is: if i do that, windows instaler askme for some files that aren't in the .exe, anway it reconices the raid and everithing goes fine until the first BOOT on windos... it shows a blue screen, butremoves it so fast that i cant read it or pause the system. But i know it's a raid problem because if i install it on a ide disk it works.
The nforce3 drivers are almost a year old, and i'm not sure if nforce4 is compatible...
I think the're compatible because if you enter in msi driver download page and select my model, they put the Nforce3 and nforce4 for win64 and my model is only nforce3. The thing is they havent released the nforce3 for WIN 64.... So.. It's normal that win asks me for some files that ain't in the .zip file (i extracted the files o course) and Which driver should i put the Nvidia one year old nforce3 or the new nforce4. (the nforce3 for 32 bits is rejected by windows) or... i have to wait the new nforce3?
thanks for helps

Problems with I/O on Unix Server

HAllo
I have a Problem with reading/writing on the Server my Tomcat is running.
My Application does not find the properties file allthough i tried to get my path with System.getProperty("user.dir"), and also tried to set an absolute path too.
It is also not able to create a new file.
My Question: What rights do applications running in tomcat have by dafault?
How cat i change this rights?
And how do the path have to look in my code if i want to set it fix?
I tried thid ones:
"/mydir/myfile.txt"
"\\mydir\\myfile.txt"

Tomcat is a regular application that has the same rights as the user executing it. Does Tomcat run as a user who has access to the directory you are trying to read/write from?

Lync 2010 Certificate Issue - "There was a problem verifying your certificate from the server"

Greetings.
My Issue:
Lync 2010 client does not connect to server;error displayed "Cannot sign into Lync. There was a problem verifying the certificate from the server."
Description:
The client is running on my Windows 7 box, and my CA server is a Windows Server 2003 box. I have installed the hotfix on the Server 2003 box to update the Web Enrollment portion of CA to allow for newer clients (Vista and 7) to receive certificates from
this server.
Lync server is running on Server 2008 R2 STD, installation was a success.
The Windows 7 box is a part of the domain.
I have manually exported the Root CA from my Enterprise CA server from
Trusted Root Certification Authorities -> Certificates and imported into the same location on my Windows 7 box.
If I look at the certification path on the Root CA, on my Windows 7 box, it says "The certificate is OK." The same goes for the servers involved.
Still nothing.
I have read the other forum posts on here about people having success once they manually import the Root CA from the Enterprise CA server, but this is not my case here.
All certificates are successfully assigned on the Lync server box; however, I did have to manually import the Root CA into Lync server's
Trusted Root Certification Authorities -> Certificates before I could successfully assign them. Had to do this on another deployment I completed, so I didn't think anything of it.
To recap: it seems that even with my Root CA imported into my Windows 7 box I can still not connect to my Lync server with the client, and I get the error message "There was a problem verifying the certificate from the server."

Solved
Solution : Export certificate from Lync Server Start > Administrative Tools > IIS > Server Certificate > Export > abc.pfx save it, Copy and place the certificate where Ms Lync 2010 client is installed or getting certificate
error. Follow these steps on client machine to install certificate
Run > mmc > add or remove snap in > certificates > computer account > local computer >finish > ok > expand Certificate > Trusted Root Certification Authorities > Certificate > All task > Import > copy abc.pfx certificate
and delete unnecessary certificate from there.
Restart Client machine and open microsoft Lync client 2010 and open option menu > Personal > Advanced > choose Auto Configuration > save ok

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

Problem with cheque printing in production Server Tcode - FBZ5

Hi
Cheque Printing using SAPScript with TCODE FBZ5.
I had a problem with cheque printing in production Server. TCODE - FBZ5
It is working fine in Development Server with proper alligned data but not coming alligned data in production server. I compared, dubugged and checked the allignment...there is no difference I found.
Could you please let me know, where the problem is occuring.
The amount is not coming properly and coming out of the box.....but it is coming properly in development server.
Sekhar

Hi,
For Amount field you must print like &amount(C)&. And it must be printer settings only. Because i gor same like this error while printing cheque. at that time Basis team had made the changes in printer settings.

Getting font problem for printing form in Production server.

Hi experts,
We are getting problem while printing form in production server. As it gives no problem in Quality server while printing the same, the print is fine. We applied packages from 26 to 28 level for version 4.7. When we moved this packages to Production server we got problem of font while printing the form for some of scripts. But the surprise is that in Quality server the print is fine, no problem at all.
Can any one suggest me on this issue.
Regards,
Sagun Desai.

Hi sagun,
Please check the spool request generated on production server using tcode SP01.
Goto dispaly spool request and check the spool.If the spool too displays your script correctly then there is a problem in printer connected to production server.
The printer connected to the test server might be rightly conffigured to print the output.Please check the settings of the printer connected to the production.
Hope this helps.
Regards,
Subodh

À PROBLEM IN THE INSTALLATION OF SQL SERVER

I HAVE À PROBLEM IN THE INSTALLATION OF SQL SERVER ,I HAVE WINDOWS 8 64 BITS LENOVO ,I TRIED MANY VERSIONS, BUT IT DOESN'T WORK YET :(
PLEASE HELP ME !

I HAVE À PROBLEM IN THE INSTALLATION OF SQL SERVER ,I HAVE WINDOWS 8 64 BITS LENOVO ,I TRIED MANY VERSIONS, BUT IT DOESN'T WORK YET :(
PLEASE HELP ME !
Without the exact error message wwe will just hit arrow in the bush.Please post summary.txt which was generated due to failed installation.Below link will help you locate it
http://technet.microsoft.com/en-us/library/ms143702.aspx
Below link will give useful info about how to proceed with installing SQL server on win 8
Considerations before installing SQL server on win 8
Hardware and software requirement for installing SQL server 2012
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Facing Problem in SLD(getting 500 INTERNAL SERVER ERROR IN PORTAL)

Dear All,
we had ESS application just few days back it went to Go live , very frequently we are facing the issue
Regards JCO 's , we are getting "500 Internal Server Error" in production Portal
After getting the error ,the " Maintained JCO's" and "Created JCO'S " are both are disabled
uder contenten administraton->webdynpro.
But the SDL is in active , we can able to open SLD url every thing is also fine
Technical system and every thing coming fine
we checked SLD User also in SLD User Administration , the SLD user is also there it is not unlocked
The problem is : if the problem is happend after restarting the server again it is coming properly
Again after some time it is getting same error ,whith out doing any thing also some times the problem is resolving automatically
we are not getting Root cause of this behaviour
In our client side SLD is centralized ,they are not maintain locally
If the SLD is Proble , the error has to come in Quality and Production also why bcz it is centralized
But Some times 500 ERROR IN Prodution and some times in Quality.
And some times the Portal is very slowly opening especially ESS application ,after restart happening it is some better
again it is getting down after some time
If it is NETWORK Iuuse or any firewall ect...in which way we can can with them and where
Guru's share your knowledge it's a very critical for me what are he possible ways...
Regards,
Giri

Here I am giving the LOG details which is available in SLD (J2EE) server
#2.0 #2012 03 03 14:24:57:513#+0530#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
#BC-XI-CON-AFW#com.sap.aii.af.lib#005056BB552201A70000000000000DF0#151402750000001894##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#Guest#0##1014F5C2650011E1B811005056BB5522#1014f5c2650011e1b811005056bb5522#1014f5c2650011e1b811005056bb5522#0#Application [17]#Plain##
SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
#2.0 #2012 03 03 14:26:06:739#+0530#Error#com.sap.nw.lm.aci.engine.base.sld.connection.AccSldConnector#
#BC-AC-7XX#sap.com/tc~lm~aci~engine~baselib~05#005056BB552201AB0000000100000DF0#151402750000008310#sap.com/tc~lm~aci~monitor~app#com.sap.nw.lm.aci.engine.base.sld.connection.AccSldConnector.getSldComputerSystemsForMonitoring(String)#Administrator#0#SAP J2EE Engine JTA Transaction : [9638fffffffe00fffffff85]#1014F5C2650011E1B811005056BB5522#1014f5c2650011e1b811005056bb5522#1014f5c2650011e1b811005056bb5522#0#Thread[Managed_Application_Thread_29,5,Managed_Application_Thread]#Java##
Unable to obtain Computer Systems, associated to NW Admin NWA_FOR_FirstLandScpSrvcName, from SLD. CIM_ERR_FAILED: No such instance: SAP_NWAdministrator.CreationClassName="SAP_NWAdministrator",Name="NWA_FOR_FirstLandScpSrvcName" [this message was repeated 9 times]
[EXCEPTION]
{0}#1#com.sap.sld.api.wbem.exception.CIMException: CIM_ERR_FAILED: No such instance: SAP_NWAdministrator.CreationClassName="SAP_NWAdministrator",Name="NWA_FOR_FirstLandScpSrvcName"
     at com.sap.sld.api.wbem.client.WBEMRequestSender.convertErrorResponse(WBEMRequestSender.java:127)
     at com.sap.sld.api.wbem.client.WBEMRequestSender.convertErrorResponse(WBEMRequestSender.java:48)
     at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:272)
     at com.sap.sld.api.wbem.client.WBEMRemoteClient.sendAndCast(WBEMRemoteClient.java:936)
     at com.sap.sld.api.wbem.client.WBEMRemoteClient.associatorNamesImpl(WBEMRemoteClient.java:507)
     at com.sap.sld.api.wbem.client.WBEMAbstractClient.associatorNames(WBEMAbstractClient.java:544)
     at com.sap.nw.lm.aci.engine.base.sld.connection.AccSldConnector.getSldComputerSystemsForMonitoring(AccSldConnector.java:3731)
     at com.sap.nw.lm.aci.monitor.fetch.util.MonitoringSldAdapter.getAllHostnames(MonitoringSldAdapter.java:277)
     at com.sap.nw.lm.aci.monitor.fetch.manager.PrefetchPackageUtil.repackageCs(PrefetchPackageUtil.java:71)
     at com.sap.nw.lm.aci.monitor.fetch.manager.PrefetchPackageUtil.repackageAll(PrefetchPackageUtil.java:58)
     at com.sap.nw.lm.aci.monitor.fetch.manager.FetchManager.repackageIfRequired(FetchManager.java:1046)
     at com.sap.nw.lm.aci.monitor.fetch.manager.FetchManager.run(FetchManager.java:435)
     at com.sap.nw.lm.aci.monitor.fetch.job.FetchJobBean.onJob(FetchJobBean.java:67)
     at com.sap.engine.services.scheduler.runtime.mdb.MDBJobDelegateImpl$2.run(MDBJobDelegateImpl.java:233)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:396)
     at com.sap.engine.services.scheduler.runtime.mdb.MDBJobDelegateImpl.onMessage(MDBJobDelegateImpl.java:267)
     at com.sap.scheduler.runtime.mdb.MDBJobImplementation.onMessage(MDBJobImplementation.java:60)
     at sun.reflect.GeneratedMethodAccessor284.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MessageListenerType.invoke(Interceptors_MessageListenerType.java:110)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Lock.invoke(Interceptors_Lock.java:21)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
     at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
     at com.sap.engine.services.ejb3.runtime.impl.MDBProxyInvocationHandler.invoke(MDBProxyInvocationHandler.java:77)
     at $Proxy1058.onMessage(Unknown Source)
     at com.sap.jms.resourceadapter.RaServerSession.internalOnMessage(RaServerSession.java:188)
     at com.sap.jms.resourceadapter.RaServerSession.onMessage(RaServerSession.java:330)
     at com.sap.jms.client.session.JMSSession.deliverMessage(JMSSession.java:805)
     at com.sap.jms.client.session.JMSSession.run(JMSSession.java:709)
     at com.sap.jms.resourceadapter.RaServerSession.run(RaServerSession.java:379)
     at com.sap.engine.services.connector.jca15.work.TaskImpl.run(TaskImpl.java:420)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
#2.0 #2012 03 03 14:26:57:526#+0530#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
#BC-XI-CON-AFW#com.sap.aii.af.lib#005056BB552201B00000000000000DF0#151402750000001894##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#Guest#0##1014F5C2650011E1B811005056BB5522#1014f5c2650011e1b811005056bb5522#1014f5c2650011e1b811005056bb5522#0#Application [6]#Plain##
SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
#2.0 #2012 03 03 14:28:57:522#+0530#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
#BC-XI-CON-AFW#com.sap.aii.af.lib#005056BB552201B70000000000000DF0#151402750000001894##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#Guest#0##1014F5C2650011E1B811005056BB5522#1014f5c2650011e1b811005056bb5522#1014f5c2650011e1b811005056bb5522#0#Application [5]#Plain##
SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
#2.0 #2012 03 03 14:30:57:519#+0530#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
#BC-XI-CON-AFW#com.sap.aii.af.lib#005056BB552201BE0000000000000DF0#151402750000001894##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#Guest#0##1014F5C2650011E1B811005056BB5522#1014f5c2650011e1b811005056bb5522#1014f5c2650011e1b811005056bb5522#0#Application [20]#Plain##
SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
Edited by: giriep on Mar 3, 2012 11:38 AM

CA issue - Workstation signin "There was a problem verifying the certificate from the server"

Hi,
We have issues with all workstations on our domain. I just recently setup Lync 2013 server on a windows 2012 OS. When I went to test sign-in, I received a message "There was
a problem verifying the certificate from the server". To fix this issue, I had to download the cert and import it into Trust Root Certification Authorities on the local workstation. This will be impossible if I have to do this for multiple machines.
Is there a way around this? Why is it asking to do this?
Thanks guys, much appreciated.
MM

You can follow the instructions here to use Group Policy to install your root certificate to all your workstations.
Or you could re-deploy your CA as an Enterprise CA.
Hi Georg,
Thank you for your reply.
I did deploy my CA as an Enterprise CA..... Not sure why its still asking me to install on workstations?
How can I confirm its an Enterprise CA?
Thanks,
MM

Best Raid Configuration for a 8-1tb hhd server

Hi All,
I have been trying to figure out what would be the best raid configuration for my Windows 2012 essentials server. So I was wondering if I could get some advise on this. Here is what I would like to get out of this configuration.
I would like to split the 8-1tb drives into 2 VHD one with about 300gb for the OS to be installed on, and the rest to be use for storage. I want like to have good redundancy, fairly good read & write capabilities.
I will be using this server for a Small Web Page and Game Hosting, Email Exchange, Critical Application hosting.
I would like the ability to enlarge the overall raid storage by swapping out my 1Tb drives with 2Tb or larger as the need for more storage arises.
Any help would be greatly appreciated,
Thanks

You may be better of using Storage spaces and not using raid at all.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Strange problem with SQLPLUS when client and server on the same box

Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AM

user11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

RAID Problems: ESXI 5.5 on TD340 Server

Similar Messages

Maybe you are looking for