Raid rebuild need to relink all folders to LR 5

Since Adobe makes it impossible to talk to them and I am forced to post this question here. I had to rebuilda raid from my back drives now all the files are no longer linked and have the little question mark how can I relink all the folder at one time? I don't want to do each folder individually as I have way to many to do that. I think there is a merge function however not sure how to do it and I don't want to screw this up and have to rebuild my raid again once is enough. Thank you for your help!

The ? means something is different in the path to the images than when they were first imported.  What is different: a device name or drive letter or top-level path folder name?  If so, then the easiest thing is to make the drive-letter or device name or top-level folder name the same as before. 
If this is not possible, then you want to relink things (via right-click Locate Missing Folder) as high as possible in the folder tree--the top level folders.  If you do that than all the folders underneath will also change without having to go to them individually.

Similar Messages

  • How to relink all the image after moving the folders?

    I have a lot of illustrator files in folder A and each file has tons of images from different folders (B, C, D...). All of these folders are inside a main root folder.
    Recently I moved this root folder to an external drive then all the illustrator files disconnect with the images. Is there any way to relink all of those images all together instead of relink them one by one?
    Thanks!

    RGB2CMYK2 wrote:
    Thanks but then does it mean I not only have to relink everything but also have to gather all the images from different folders and put them in the same folder as the ai files? The images are from at least 20 different folders and there are more than a hundred of images in these 20 ai files.
    I would say you made a big mistake by moving all those image especially since you know you had 20 ai files each with hundred of images.
    Even if you did not move them this is a poor workflow sinvce for out put you more than likely would need to collect those linked images. That can be too much fun.

  • Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro.  45 Gb of 162 Gb are missing.  Any one having success with time machine copying all folders using Mavericks?   What do I need to do dif

    Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro.  45 Gb of 162 Gb are missing.  Any one having success with time machine copying all folders using Mavericks?
    What do I need to do differently?

    The late, great Pondini was investigating that issue before he passed away.
    See here: https://discussions.apple.com/thread/5125969
    I think there might be information there on how to reset Time Machine to do a full backup. I think you basically have to reset it and start over.

  • Relinking all files in a document...

    Hi all,
    I'm running InDesign CS6 on Mac (Mountain Lion).  I am working off site from my office for a while, so I've copied all the files from our server onto my desktop.  All of the filenames, folders are identical to those on the server.
    The problem is, when I take an InDesign file, all of the links are broken because it's trying to search the server.  Is there an easy way to relink all of the files in my document? 
    Thanks!

    I interpret the OP to say he is recreating a file structure on his home workstation that matches the structure on the server, which may or may not be putting all the links into a single folder and putting that folder inthe same location as the .indd file (and I would have to say that since he's getting missing links that cannot be what is happening).
    Packaging would, indeed, stop the missing link warning at home because that is the file structure that gets created inthe package folder. The problem is that the .indd file iin the package no longer has links to the original locations on the server, but to the new copies of the links in the package folder. Moving that file back to the server opens up the possibility that you now have two copies of all the linked assests and if they need to be updated the wrong ones will be modified or relinked at some point. This is a can of worms that I wouldn't want to open. You are quite correct, though, that whatever the OP does, if he relinks the files at home, he's setting up a missing link problem back in the office when he takes the file back.
    I think the best course of action is to ignore the link warnings and just edit the text, but I don't know the scope of the work that needs to be done, nor if the files will ever be returned to the office or if they need to be output from home, all of which are important parts of the puzzle.

  • RAID rebuild quiestion

    So please tell me....If I have a RAID (RAID 5), and I have a degraded state (one of the drives pulled itself out of the RAID), to rebuild, do I only need to:
    1. reboot,
    2. hit F10
    3. delete all of the drives from the RAID/s
    4. re-add all the drives in the exact same order and make sure not to select Clear Drive
    5. reboot and allow to rebuild
    Will this wipe my system that is curretly on the drive?

    NOOOO!!!! 
    Do not delete the RAID or you'll loose everything. 
    What you need to do is find out which drive is bad and just power down and replace the drive.  You should have to go into the RAID BIOS and edit/change/add the new drive to the existing RAID.  after you have it added, reboot and the rebuild should be automatic and may take an hour or so depending.
    I have only did this once and on a hardware RAID, but that was all I had to do. 
    You should also have the option in windows to try and repair the RAID Array.  I never did this before, but if I remember right all you have to do is find the bad drive in Computer Management(It should be out of the array) and reformat it(do not quick format), then re-add it to the array(You may need to use the NVRAID software).
    -=Mark=-
    ps. Computer Management for XP is located in Start--> Performance and Maintenance--> Administrative Tools--> Computer Management and then select Storage, then Disk Management(Local), then find the problem disk to continue.

  • Opening all folders in a folder

    In OS9 you could open and close all folders in a folder with key strokes. It's been years since I did it, now I have to do it in OS10.3.9 to show all files on disc's I'm creating. Sure could use a little help.

    You mean using List view, do a Select All (Command-A) and then hit the right arrow ? Select All again if needed and right arrow again. Left arrow closes all the selected ones at once.
    Or did you have another view in mind ?

  • Feature Request, option to relink all unlinked layer masks when transforming multiple layers at once.

    As a professional PS artist who works on files with sometimes hundreds of layers, I often need to transform many layers or groups at once. It is a nightmare to find that after the transformation, a mask did not get included in the transformation, (especially when the file is many gigs large, and the transformation took 15 minutes). Sometimes, a mask is accidentally unlinked, but more commonly I unlink it temporarily, but forget to relink it. There is currently no way that I'm aware of to find these pesky unlinked layers, other than going through every single one. What would work great is to have a popup asking if you would like to relink all unlinked layers, whenever you're transforming multiple layers that include one or more unlinked masks. Or else have an option in the layers palette to either select or relink all unlinked layered masks. Hope this makes sense. Cheers!

    Michael,
    It looks like you are right! Thank you for your help.
    I still have a small concern. I looked at the documentation and it reads,
    "The configuration settings for a cache instance are stored in the USER_SDO_CACHED_MAPS metadata view. You should normally not manipulate this view directly, but should instead use the MapViewer administration tool, which uses this view to configure map cache instances."
    But, I tried inserting records into USER_SDO_CACHED_MAPS and it works, and I can't really see any reason not to directly insert records into this table, so...
    Perhaps that warning is there simply because potentially you could screw things up tinkering with the table directly.
    Cheers!
    John

  • How can I set a customized view in finder set as standard for ALL folders?

    As I have a large number of folders, I need a specific view in finder: symbol view, sort by program and name. I tried to use this settings as standard for ALL folders, but using the 'set as standard' button does only work for the folder I am in, but not for ALL folders. I even tried to use this settings on the hard disk level in finder, but what ever I tried, it never applies to all folders. The problem occurs on each of my devices and on Yosemite OS 10.10.1. as well as Mavericks 10.9.5. Any ideas on how I can make the 'standard' work on all folders?

    As Vinod says, unique key validator would be fine.
    However, In Gabriel's blog:
    Performing a unique key validation for an attribute that is declared to be unique in the database requires a round trip to the database. This is quite expensive and there is a fast and easy way to work around it.Is false on several fronts:
    1). it's not expensive - it's actually cheaper than the alternative
    2). Unique key validator can require many trips to the DB to validate - it must check all other rows in the EO to ensure there is no duplicate, and all of those rows must be fetched into the middle tier to do the validation: this is expensive.
    The "cheapest" way to do this: unique constraint in the DB
    John

  • Recursively search folders, export to excel all sub-folders. All folders containing ReadMe.txt export contents.

    I have a bunch of VBScripts that I created using help from this forum and other forums.  These scripts are for fixing Windows problems, installing software and setting configuration settings. Each script is in a separate folder. Some of the script folders
    contain a file called ReadMe.txt that contains info about the script and what it does.  I am trying to document all my fixes so I can share them with coworkers, friends and anyone who needs help. I struggle with the "recursive" feature in VBScript.
    I found the Scripting Guy's article on recursive searching and found another article from another website that works really well for listing all folders and subfolders to a CSV file.  I'm having trouble adapting the script.  After it exports the
    folder list to the CSV, I need it to go back through the list and for every folder that contains the ReadMe.txt, export it's contents to the row for the specific folder that contains the file.
    I've tried several modifications of this script but all my attempts cause the script to Not export the file list.  I cannot get past this problem. Until I do that I cannot even focus on the exporting the contents of the ReadMe.txt file to the CSV file.
    Here is the code I have
    Dim objFSO
    Dim ObjOutFile
    'Creating File System Object
    Set objFSO = CreateObject("Scripting.FileSystemObject")
    'Create an output file
    Set ObjOutFile = objFSO.CreateTextFile("OutputFiles.csv")
    'Writing CSV headers
    ObjOutFile.WriteLine("Type,File Name,File Path")
    'Call the GetFile function to get all files
    GetFiles("H:\0-Fixes")
    'Close the output file
    ObjOutFile.Close
    WScript.Echo("Completed")
    Function GetFiles(FolderName)
    On Error Resume Next
    Dim ObjFolder
    Dim ObjSubFolders
    Dim ObjSubFolder
    Dim ObjFiles
    Dim ObjFile
    Set ObjFolder = objFSO.GetFolder(FolderName)
    Set ObjFiles = ObjFolder.Files
    'Write all files to output files
    For Each ObjFile In ObjFiles
    ObjOutFile.WriteLine("File," & ObjFile.Name & "," & ObjFile.Path)
    Next
    'Getting all subfolders
    Set ObjSubFolders = ObjFolder.SubFolders
    For Each ObjFolder In ObjSubFolders
    'Writing SubFolder Name and Path
    ObjOutFile.WriteLine("Folder," & ObjFolder.Name & "," & ObjFolder.Path)
    'Getting all Files from subfolder
    GetFiles(ObjFolder.Path)
    Next
    End Function
    Helpful nice guy

    Here is a fixed version of your script.  Run it and tell us what errors you are getting.
    Set objFSO = CreateObject("Scripting.FileSystemObject")
    Set objOutFile = objFSO.CreateTextFile("OutputFiles.csv")
    'Writing CSV headers
    objOutFile.WriteLine "Type,File Name,File Path"
    GetFiles "H:\0-Fixes"
    objOutFile.Close
    WScript.Echo("Completed")
    Function GetFiles(FolderName)
    Set objFolder = objFSO.GetFolder(FolderName)
    For Each ObjFile In ObjFolder.Files
    objOutFile.WriteLine "File," & ObjFile.Name & "," & ObjFile.Path
    Next
    'Getting all subfolders
    Set objSubFolders = ObjFolder.SubFolders
    For Each ObjFolder In ObjSubFolders
    'Writing SubFolder Name and Path
    objOutFile.WriteLine "Folder," & ObjFolder.Name & "," & ObjFolder.Path
    GetFiles ObjFolder.Path
    Next
    End Function
    ¯\_(ツ)_/¯

  • Query to get a listing of all folders and joins in EUL

    If anybody has a query that provides a listing of all folders and joins between those folders in a Discoverer EUL, can you please share it.
    Any help would be greatly appreciated.

    Hi
    As Rod commented you won't get an accurate listing going through XREFS. You need to look in the statistics table, EUL5_QPP_STATS where you will find a history of all worksheets that have been executed. Unfortunately the item columns in EUL5_QPP_STATS are encoded so you will need some special SQL to uncode them.
    First of all you will need to have installed the EUL extensions which can be found in the script called EUL5.SQL (located in the Discoverer\Util folder where Admin is installed) when logged in as the owner of the EUL. Theh try running this script, altering the data switch to a suitable date:
    SELECT
    QS.QS_DOC_OWNER    USER_NAME,
    QS.QS_DOC_NAME     WORKBOOK,
    QS.QS_DOC_DETAILS  WORKSHEET,
    TRUNC(QS.QS_CREATED_DATE) EXECUTION_DATE,
    *(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 ITEMS,*
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),1,  6)) ITEM1,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),10, 6)) ITEM2,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),19, 6)) ITEM3,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),28, 6)) ITEM4,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),37, 6)) ITEM5,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),46, 6)) ITEM6,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),55, 6)) ITEM7,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),64, 6)) ITEM8,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),73, 6)) ITEM9,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),82, 6)) ITEM10,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),91, 6)) ITEM11,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),100,6)) ITEM12,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),109,6)) ITEM13,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),118,6)) ITEM14,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),127,6)) ITEM15,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),136,6)) ITEM16,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),145,6)) ITEM17,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),154,6)) ITEM18,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),163,6)) ITEM19,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),172,6)) ITEM20
    FROM
    EUL5_QPP_STATS QS
    WHERE
    *(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 < 21*
    AND QS.QS_CREATED_DATE > '01-JAN-2009'
    Best wishes
    Michael

  • Which all folders tend to increase in thier size under USR/SAP ?

    Hi,
      We have installed EP 7.0 on HP UX in our landscape.
      We have deployed the XSS components and ESS/MSS/SRM/CRM business
      packages on to our portal.
      After which we have identified an increase of 3 GB in our usr/sap folder.
      Pls. let me know if there is some content that keeps on piling up and can be
      deleted.
      What all folders are to be monitored regularly and maintained?
    Thanks & Regards
    Mrutyunjay

    Hi,
    As told by all, Just login to OS level. See if the file u wanna delete is already imported. If so just delete them.
    As they are of no use once imported into system.
    if u have any drive to dump all such files, better go nd place them there. So that later if u want to import those files to any other system u need not have to download onceagain.
    Regards,
    Ravi

  • Mirror e-mail and all folders on a desktop and a laptop

    I use my latptop for traveling which is about every three weeks. I need all the e-mails from my desktop on my laptop. With apple mail all the e-mails I recevied show up on both. But once I put an e-mail in a folder, then it no longer shows up on the other computer. Any suggestions for mirroring all folders and their contents on both computers.

    You’re welcome.
    Assuming you have enough space allocated to your .Mac mail account on the server to do it, you must choose the .Mac server as the location when creating your custom mailboxes instead of creating them as “On My Mac” mailboxes, then move there the messages that you want to keep synchronized between computers. Mail Help’s “Creating a mailbox” article explains how to do this.

  • All folders - view permissions

    I'm trying to grant users the minimum permissions they need to work with their reports. Granting Full Control permission on the folder containing their reports doesn't seem to work, because without View on the All Folders list, they can't even see the folder to access the reports. However, if I grant View on All Folders, they have access to all the folders until I go through and explicitly remove them. Am I missing something, or is this the way it's supposed to work?
    Thanks.
    Edit: Oh, I see -- I was misreading the "inherit from parent" checkboxes. If I turn those off, they only apply to the folder I'm setting them for, which is the behavior I wanted. Thanks anyway!
    Edited by: Garrett Fitzgerald on Apr 20, 2009 1:22 PM

    No, that's not right. Damn. Sorry. What am I doing wrong?
    Edit: Ok, got it that time. I wasn't telling it to only apply "View" to the current object.
    Edited by: Garrett Fitzgerald on Apr 20, 2009 2:00 PM

  • Is all folders expandable fucntionality in DLN possible for EP7.0 SP6??

    Hi All,
    As specified in the below thread we have modified the com.sap.portal.navigation.lightdetailednavigationtree.par as mentioned in the below changes but still the fucntionality of expanding all folders in DLN by default on click of role is not working, still all folders in the Detailed Navigation(DLN) in collapsed mode.  
    Is it possible to enable this functionality in EP 7.0 SP6 version, which is our current portal version?? or else would we need to have at least SP13 version to achieve this functionality??
    Could you please let us know what are other changes required in portal other than below PAR file changes to achieve the functionality??
    Any pointers on this issue would be great help to us.
    Thanks in advance.
    thread : http://forums.sdn.sap.com/thread.jspa?threadID=1650909
    *The following are the changes which i made in the jsp file of  LightDetailedNavigationTree.jsp  in the PAR file.*
    a) Replace the nodeInSelectedPath value from false to true
    <nav:recurseNavNodeChildren currentDepth="currentDepth" currentNavNode="currentNavNode">
    <% nodeInSelectedPath = true; %>
    <nav:ifNavNodeInSelectedPath>
    <% nodeInSelectedPath = true; %>
    </nav:ifNavNodeInSelectedPath>
    b) and commented the below some if condition code(b).
      if(nodeIsOpen) {
    if(nodeIsPressed) {
       openNodes.remove(nodeIDInteger);
       nodeIsOpen = false;
    } else {
    // if(nodeIsPressed) {
    //    openNodes.add(nodeIDInteger);
    //    nodeIsOpen = true;
    openNodes.add(nodeIDInteger);
    nodeIsOpen = true;
    Regards,
    PortalUser100
    Edited by: PortalUser100 on Jan 27, 2011 7:13 AM

    Hi Tobias,
    Thanks for your reply.
    Could you please let me know what are the changes woule be required to be done in the PAR file of com.sap.portal.navigation.detailedtree, where i couldn't see any JSP file to modify. actually our requirement is we need to expand all the folders by default which are displayed in the detailed Navigation. currently as of now all the folders are in collapsed mode, user has to expand the folders manually in DLN.
    I have already download the PAR file specified by you and als imported into NWDS, now could you please help what are the changes would require in code to achieve the functionality as mentioned above.
    in the PAR file, currently i am able to see only the properties file and one Java Script(JS) file , not find out any JSP file in that PAR file. could you tell me where to do the changes in the JS file and Properties file of the PAR file.
    Thanks,
    PortalUser100

  • Newbie lesson - xServe RAID boxes need 2 Controller modules to work well!

    So I thought I'd share my experience with my xServe RAID box, because I built it from parts (via eBay) I thought I could run it with a single controller with up to 7 drives until I needed to expand it later, I had all sorts of strange problems:
    - Could't build new RAID arrays
    - Couldn't update firmware
    - Restarting box often led to the array disappearing
    - Existing array sometimes didn't show up in Disk Util.
    I tried replacing cables and Fibre cards but no change until I added a second RAID controller and then suddenly everything worked great!
    Thanks to everyone here for trying to help me out with my problems, the box now runs great
    So the lesson here is that an xServe RAID box needs 2 controllers to function properly, with only 1 it runs in some kind of undocumented failsafe mode.

    See my response to your crosspost in the Xserve RAID group.

Maybe you are looking for