RAID removing missing/damaged slice from mirror

I had a disk fail from a mirror RAID config. I replaced it with a new driver and added it to the array. I repaired the array. Now I end up with an extra slice for the disk that failed originally. How do I get rid of it?
Name: Humongous
Unique ID: 5A6F0ECF-C86A-4BD6-9B55-050A2AE74B70
Type: Mirror
Status: Degraded
Device Node: disk8
Apple RAID Version: 2
# Device Node UUID Status
0 disk7s3 86264B1D-B5FB-4D8F-B5F2-73DE1F3516B9 Online
2 disk10s3 E688249B-D352-4F90-A7FB-E8F81153EC77 Online
2 Unknown Missing/Damaged
----------------------------------------------------------------------

Just remove each disk from the array. They will appear on your Desktop with same names, so you may want to rename them. Delete the array entry in the RAID panel of Disk Utility. This is a simple process with a mirrored RAID, and there should be no loss of the data on either drive. I've done this several times over the years.
I am a strong believer in CYA, so usually I have backups of the array just in case, but so far I've never encountered any problems with breaking a mirrored RAID.

Similar Messages

How to Remove Stock (Damaged Goods) from System?? MIGO Mvmt Typ - 555

Dear Xperts,
I have STO Scenario, where we use MIGO for GR at receiving Plant/Depot.
In case of Damaged Goods
    10.00 MT    (STO Qty)
=
      9.50 MT    (Received at destination Plant/Depot)
+ 0.50 MT    (Damaged Goods)
We receive Damaged Goods in specific SLOC (ABCD) and raise Debit Note to Transporter for that Quantity... So we get the value in the Accounting.
But we still have this STOCK in the system...
How to remove this stock from the system?????
(without accounting effect.. B'coz we already have the accounting effect in the system..)
I tried Movement Type - 555 but still it gives accounting effect...
Any inputs..??
Thanks & Regards,
HP

How to remove this stock from the system?????
(without accounting effect.. B'coz we already have the accounting effect in the system..)
You can use MB1A / MIGO + 551 / 553 / 555 as it was laready told by you.
"Accounting effect" is not totally clear... If your material is valuated (and I assume it is), you cannot get rid of with w/o generating accounting document (normally).
One idea:
If your transporter exists in SAP as a vendor (I suppose it), you can create a return PO (PO item with return flag) and post a GI by mvt 161 to your vendor. After that your vendor (transporter) sends you a credit memo - so, in this case no scrapping is needed.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63341243a211d189410000e829fbbd/frameset.htm
Regards,
Csaba

How do I remove a damaged phone from the icloud?

I have removed it using the mac, and it no longer shows up as a phone on the icloud.
However, the phone company has still barred the replacement as a result. The phone no longer allows for outgoing or incoming calls. They still belive that it is connected somehow. They are suggesting that due to the damaged phone being connected, I am not yet entitled to the new phone.
The phone company want us to remove data from the icloud from the damaged - and unusable - iphone.

Check that thread out.
https://discussions.apple.com/message/22876376

RAID Missing/Damaged Unknown Drive

I have a RAID mirror that had a drive go bad. I replaced the drive, but now the mirror reports a ghost drive that is missing or damaged but with a Device Node of Unknown.
I used diskutil checkraid and get:
Name: Mirror 1
Unique ID: 89E317AC-F25B-44AA-8E3F-FB583001F6F8
Type: Mirror
Status: Degraded
Device Node: disk7
Apple RAID Version: 2
# Device Node UUID Status
3 disk4s10 129D802F-2622-4EC7-AA78-36E1E938F99E 4% (Rebuilding)
2 disk6s3 4F23DE97-9066-411C-BF01-2001CDAA00FA Online
2 Unknown Missing/Damaged
2 Unknown Missing/Damaged
This is the results after attempting to remove and add both good drives from the RAID. With the mirror degraded like this I can't properly monitor the RAID. The RAID is functional, just not monitorable.
How do I get the Unknown drives to go away and put the RAID back into a normal on-line state.
Thank you for your help and tips,
...Duane
Mac OS X (10.4.8)

There are several different chipsets that support port multipliers. A 4 port PM capable host card will support up to 20 drives, while a 2 port supports up to 10. The 4 port cards are usually significantly faster performers. Most any card that states it supports port multiplier will run most any port multiplier enclosure.
At the enclosure end I have only ever seen Silicon Image or Marvell chipsets used. And either SIlicon Image or Marvell based host card will run either of them.
That said, it is always possible you have something I have never seen or tested. Without details on the enclosure all I can do is guess or just tell you is get a PM capable host card and hook it up. Or you can pull the port multiplier board out and read the chip info off it.
Rick

10.3 Server new install won't boot from Mirrored RAID - HELP!!

Hi all,
I had 10.3 Server running fine on a 450 MHz B&W G3 (home server use, nothing too demanding), when I decided to add a 2nd HD and run the server from a RAID mirror (both 80GB drives). I had problems enabling RAID on the boot drive with diskutil in Terminal, so I decided to rebuild the server. I didn't have much besides the system on it, so backing up data and re-installing isn't a big ordeal (or so I thought).
No problems creating the mirror set once I re-formatted the drives. The install seemed to go fine (10.3.4 on install disk), but upon restart, I got the flashing system folder/question mark. When booting from the install disk, Disk Utility recognizes the RAID, and Startup Disk recognizes the mirror as a viable boot drive and allows me to select it and restart. Same problem, no system found.
When I run diskutil info for the mirror, it lists the mirror volume as Not Bootable.
I've checked the disks with both Disk Utility and DiskWarrior - all looks OK. I've reset PRAM and NVRAM, taken out added PCI cards, and disconnected all FW and USB devices (besides kbd and mouse).
Unfortunately, B&W G3 can't boot from an external FW drive, so I'm stuck with booting from a CD/DVD for troubleshooting.
My next step is to re-install on a single drive again and try to enable RAID and mirror, but I'd sure like to avoid that if I could.
I've searched through this board and didn't really see this particular situation. Any of you smart server folks seen this before -- any ideas or suggestions??
TIA,
Brad
B&W G3 Mac OS X (10.3.4) 450 MHz, 10.3 Server, 80GB RAID mirror

if you backup your data from a NON-RAID Drive (Single drive), create a RAID array and then Restore from the backup you created... you will find you cannot boot from the drive.
Apparently the sector or drive header information in a non-RAID drive is different than in a RAID array... so when you restore the backup data from the non-RAID drive to the new RAID Array; you effectively corrupt the RAID array not allowing it to be booted from.
The solution is to create the RAID array and then re-install your system from scratch... copying over the data you want to keep from your initial backup one file at a time (don't do a complete system copy or you will once again, corrupt your new RAID install).
I had the same problem and it took me a great deal of time to figure it out.
Joe

HT3275 TIME MACHINE GONE... EARLIER, OTHER OS APPS NOT THERE, DAMAGED MAC from what??

MAC: OS 10.5.8, LEOPARD, Purchased in November, 2008. One year later, MAJOR ISSUE OCCURRED! SEE FOLLOWING DETAILED DESCRIPTION.
MAJOR QUESTIONS ARE AT THE BOTTOM! (Included volumes of information, as without it, I don't think anyone could even begin to help me. APPLE COULDN'T AFTER ~2 YEARS!)
"Damaged" Mac, (from what?) OS Apps gone, NOW Time Machine GONE, can't save info fr Mac to Re-Load OS. TRIED the page on how to repair/fix to no avail. I bought my Mac in November of 2008 & paid for Apple Care for 3 years & paid for 1 year of classes. About 1 year after purchase, & nearly one year of classes, I had NOT been told to trash my downloads, but had been told that I would NEVER lose anything, to not be afraid to try things. However, after checking at least 6 times to make sure that the things that I had SAVED, did not go away when "trashed" from downloads, I set my Mac to send all downloads to trash, believing, based on my testing & what I had been told by APPLE, that IF pics, pages, documents, folders, albums, etc had been SAVED, that when sending the same downloads to trash, I would NOT lose any of them. And that they would remain in folders & albums & such.
I walked away from my Mac as I had many downloads, but had happened to leave my iPhoto open & when I passed by I saw that nearly ALL my pics were being DELETED TO TRASH!!! It was the middle of the night, so there was no one to help me. The only option that I had was to BRING BACK ALL 8,000+ FILES TO MY DESKTOP, WHICH of course, STOPPED MY MAC from FUNCTIONING.
I called Apple Care when the next day & they set me up for an hour appointment with the "GENIUSES", who only take 15 minute appointments.. The "GENIUS" was rude... Said, “I have already spent 10 minutes on you!” "What do you want me to do?" I said, "I want all my folders, pics, documents back... AND I want to know what happened?? As I checked 6X to make sure this would NOT happen."
He took my Mac to the back & PUT ALL THE FILES IN ONE FOLDER, AS IF THAT WOULD HELP ME. NO ONE HAD ANY IDEA AS TO WHAT I COULD DO or WHAT HAD HAPPENED, BUT TO DEAL WITH EACH FILE INDIVIDUALLY & PUT IN FOLDERS OR ALBUMS OR WHATEVER. (And YES, I AM YELLING... not at you people, but at APPLE & THE **** I HAVE GONE THROUGH THE PAST NEARLY 3 YEARS!)
They "didn't know" & said that "you must have done something wrong"... "WHAT"???, I asked repeatedly & got the same answer, "I don't know, you must have done something wrong" THEY ARE THE GENIUSES! SURELY ONE OF THEM COULD FIGURE OUT WHAT WENT WRONG??? I was toward the end of my classes & was desperately seeking help for this "mess", instead of learning more about Macs... & that was a total waste of time. I NO LONGER HAD FOLDERS, ALBUMS OR ANYTHING BUT >8,000+ SINGLE FILES TO DEAL WITH MYSELF!!
I spent months & many hours over the next 2 years talking with Apple Care on the phone to NO AVAIL. I would get the "newbies", even when I asked for the "supervisors" or the "specialists" because they were inundated with calls & would transfer to agents who knew only the very basics & after 45-60 minutes, they would tell me that I needed to talk with a "specialist". DUH!!
Toward the latter months, they finally decided that I needed to talk with several "SPECIALISTS" for whom I would have to call & then they would call me back. For a while, they were good about that, not that anything was resolved, then all of a sudden, NO CALLS BACK FROM TWO OF THEM... nothing more was being done for me even though I was still under APPLE CARE!
NO ONE ELSE FROM APPLE could ever tell me just what might have happened, UNTIL MAYBE TOWARD THE END OF MY COVERAGE, BUT THEN they were NOT SURE & the damage had been done for nearly 2 years & I was within 2 months of the end of my contract when I had to have bilateral eye surgery, so I was no longer able to SEE to even deal with Apple Care.
A few weeks back, I thought I would try MacKeeper for a trial... & after getting the "free scan & PARTIAL fix", I "online chatted" with an agent & found that if you ask, you can get a 14 day "Free Trial" that actually clears up everything! So, I went for that. (You have to ask for it, btw!!)
It 'appeared' that MacKeeper was scanning & fixing. I had asked how often one should do this... every 2 -3 weeks... well, that would have meant that my 14 days would have been a moot point, so I tried it on a daily basis for 3 days & it always had "issues" & said it fixed them, but somewhere I found that IT HAD DONE NOTHING!!!
So, I "online chatted" again with a very "knowledgeable guy" who asked if he could take over remotely to check my system to see why MacKeeper was NOT working for me. (I still don't know why it 'appeared' to be working?? And could never get an answer to that one.) Anyway, he took over remotely & "whizzed" through all sorts of stuff & then told me that my MAC WAS DAMAGED!! I asked "as in what?" As in, Launch Agents were missing, for example. I had told the 'Geniuses' when I had my "issue" in December of 2009, that it looked like some of Garage Band, (which I had never used) had disappeared & that it seemed that some of the OS had been deleted along with my files, but they ignored that!
IT TOOK SOMEONE FROM MACKEEPER TO FIND THAT OS APPS WERE MISSING AFTER DEALING WITH APPLE GENIUSES & SPECIALISTS FOR ~2 YEARS WHO HAD NOT A CLUE AS TO WHAT WAS WRONG OR HOW TO FIX IT!!! .......... (WHAT IS WRONG WITH THIS PICTURE????)
Apple-->NO HELP >2.5 yrs...... >3 years paying Apple-->natta. MacKeeper found missing OS Apps in ONE REMOTE VISIT!!!.
THE MACKEEPER GUY SAID THAT I NEEDED TO RE-INSTALL MY OS! To call APPLE... When I told him how I had paid for help & the hours & months of phone calls & frustration with my MAC, he gave me their site to help me to Re-install my OS, but this was a ONE time deal via the internet with only the "trial version". I am past the date... but justifiably so. I, again, "online chatted" with THREE PEOPLE AT THE SAME TIME, who didn't want to help me & who left me hanging for 30 minutes & never came back... grrrrrrrr.
BUT I CANNOT RE-INSTALL MY OS w/out backup with TIME MACHINE, WHICH IS NOT WORKING NOW,......NOT ON MY MAC ANY LONGER!!! [Why??? I have NO idea!!!]
I know that I need to be sure that ALL THAT IS ON MY MAC IS DOWNLOADED TO AN EXTERNAL HARD DRIVE TO SAVE, AS WHEN I RE-INSTALL MY OS, IT WILL CLEAR MY MAC & I WILL START ALL OVER AS I DID WHEN I FIRST GOT THE MAC, SO, I HAD BEEN BACKING UP WITH MY TIME MACHINE.... (OR SO I THOUGHT???), BUT DISCOVERED YESTERDAY, THAT MY TIME MACHINE WAS NO LONGER FUNCTIONING... ONLY "READING?" & NEEDED TO BE RE-DOWNLOADED, as well, which means that what I have on my external HD, (Western Digital MYBOOK) will still be there, but that the RE-INSTALLED TIME MACHINE WILL DOWNLOAD EVERYTHING AGAIN, NOT JUST FROM THE LAST TIME IT WORKED.
I called Western Digital tonight to SEE IF my MYBOOK(s) were working properly. He said that they should come up on my desktop, but they rarely ever have, but for a few moments last night & once tonight. I went to the site that tells one how to "fix" TIME MACHINE PROBLEMS, but had already been there & nothing there worked.
He suggested that I go on an APPLE SUPPORT COMMUNITY FOR YOUR HELP & so I am.
SO, HERE ARE MY MAIN QUESTIONS/PROBLEMS/ISSUES:
     *HOW DO I FIND OUT JUST WHAT OS FUNCTIONS ARE MISSING?
     *WHAT CAN I DO TO GET THEM BACK BESIDES RE-INSTALLING MY OS WITH MY DISKS?
     *IF I AM UNABLE TO BACK UP WHAT IS ON MY MAC ONTO MY EXTERNAL HD, THEN WHAT CAN I DO? I DO NOT WANT TO LOSE ANY OF MY PICS, DOCUMENTS, CREATIVE WRITING, IMPORTANT INFO?
    *I AM ON DISABILITY & HAVE NO MONEY TO HIRE A MAC SPECIALIST... (& AFTER MY DEALINGS WITH APPLE'S SPECIALISTS, I AM NOT VERY OPTIMISTIC ABOUT THAT ANYWAY!) Besides, my MAC is ~4 years old, the clicker on the mouse pad has not worked in ages, it has not enough memory...
     *HOW CAN I TELL WHAT IS "SAVED" ON MY EXTERNAL HD (MYBOOK), IF WE CANNOT ACCESS IT? (I CAN HEAR IT RUN & FEEL IT RUN, BUT AFTER TRYING TO "CLEAR" IT, IT IS THE TIME MACHINE ISSUE THAT IT KEEPS SAYING IS THE PROBLEM.
   (I AM BETTING THAT THERE ARE MANY MORE OS FUNCTIONS THAT ARE MISSING, AS I HAVE BEEN CURSING THIS MAC ALMOST SINCE I GOT IT.)
     AFTER I AM "ONLINE" FOR A WHILE, THE "SPINNING BALL OF DEATH" GOES ON & ON & SAFARI MAY JUST CLOSE DOWN... & IT IS NOT JUST SAFARI, THAT JUST HAPPENS TO BE THE ONE THAT I USE THE MOST!
NOTE: *RECENTLY HAVING PROBLEMS SUCH THAT OFTEN WHEN I HIT /.... IT GOES TO SOME OTHER PART OF THE PAGE or deletes the whole thing!
           *ALSO, I OFTEN LOOK UP & WHAT I HAVE TYPED HAS TOTALLY DISAPPEARED AS JUST HAPPENED HERE... OMG
           *MAY FIND A FEW WORDS IN ANOTHER PARAGRAPH!.... (WHAT IS GOING ON??)
[PLEASE DON'T BE ANGRY WITH ME FOR ALL THE CAPS, AS IT IS THE ONLY WAY THAT I KNOW TO REALLY EMPHASIZE THE SERIOUS STUFF & AS I OFTEN SAY IN FACEBOOK, "YES, I AM YELLING", but it is at APPLE & my Frustration over the past 3 years!]
Thank any & all of you for any help that you can give. Please be VERY SPECIFIC, as I don't "cookbook" so well.
ONE MORE THING:
CAN ANYONE TELL ME IF ANY OF THESE ISSUES COULD HAVE BEEN CAUSED BY A LIGHTENING STRIKE, WHICH FRIED ALL OF MY TV & INTERNET COMPONENTS?? (If so, my insurance will buy me a new Mac, which would be awesome!)... May need to post this as another question, but am “fried” right now & thought I would just add this. [Most say that because these are “software issues” that ‘NO’, lightening could not have been the culprit or even part of all that is additionally going on, that it would have to be a “hardware issue”. If any of you REALLY SAVVY MAC FOLKS CAN TELL ME DIFFERENTLY & HOW TO PROVE IT, THAT WOULD BE AWESOME! As you can see, I desperately need a new Mac.
PEACE!

Oh, My! I am so confused & scared. Haven't acted on this or anything else in my life. I am nearly paralyzed with all the issues going on in my life. If ONLY I could GET MY MAC BACK TO PROPER FUNCTIONING. I had issues before the MacKeeper, & lightening strike in March which "fried" all of my components, except this "bloody" Mac, but the problems keep piling on.
Help me, please, someone. I know that you are trying, BDAqua, but I just don't understand?
Yes, that is the window.. says do not open use MacKeeper Downloader, but then shows the "UNINSTALLING MACKEEPER" WEBSITE, which IS MacKeeper's... I don't even know how to do the "Quote Previous Message" for philastokes site, only YOURS & that is NOT what I need.
What is SW???? Calls for Driver 9 For Time Machine, but I think that is related to Time Capsule, which I don't have.
NOTE: SOMEWHERE HERE I SAW SOMETHING ABOUT "LAUNCH AGENTS"... THAT IS ONE OF THE OS PARTS THAT IS MISSING PER MacKeeper... & who knows how many others? Clearly, something has happened to my TIME MACHINE & MY EXTERNAL HD, (MyBook). MacKeeper said that my system was damaged, e.g. "LAUNCH AGENTS" & THAT I NEEDED TO RE-INSTALL MY OPERATING SYSTEM, but without having a FUNCTIONAL BACK UP, I WILL LOSE EVERYTHING.
WESTERN DIGITAL, [MyBook External HD which I used for Time Machine Back up Storage] COULD NOT HELP ME UNTIL I GOT MY "DAMAGES" FIXED & of course MACKEEPER SAID TO CONTACT APPLE OR THEIR "GEEK ON DEMAND" VIA EMAIL, which I have not!
ALL ATTEMPTS AT "FIRST AIDS" FAILED OR WERE NOT AVAILABLE!
What you, BDAqua sent me, I did, but no change... Your "procedure", not the websites.
It is hard to tell from the Philastokes writing what is to BE used & what NOT to use???
Under:
SEP 21
Posted by philastokes
MacKeeper – also known as 911 Bundle‘ in the App store — yes, you’ve seen the ads all over the internet, pop ups on your favourite webpages, it seems to be everywhere.
Many people that download and use MacKeeper experience severe problems as a result. My advice regarding this program is:
***DO NOT USE IT!***
It is extremely dangerous, particularly its Fast CleanUp option. If you are in any doubt, have a read through some of the several hundred comments below this post. If you have already installed MacKeeper and wish to remove it, read on.
IS THIS THE EXAMPLE OF WHAT NOT TO USE??? ONLY SHOWING US WHAT NOT TO USE???
Then he states this:
Uninstalling MacKeeper 2012
If you have used MacKeeper to encrypt any data, unencrypt it now. If you remove MacKeeper without unencrypting your data first, you will not be able to access it later. This only applies to data encrypted with MacKeeper, and not data encrypted using Mac OS built-in encryption services or using any other program.
Once that is done, you can follow MacKeeper’s uninstall instructions here:
http://help.mackeeper.zeobit.com/Manual/GettingStarted/UninstallingMacKeeper.htm l
These instructions promise that they will remove all MacKeeper’s associated files (see the note ‘Important’ at the bottom of their page). However, you may wish to do Step 4 in the procedure below for earlier versions of MacKeeper to check MacKeeper does not have access to your Keychain.
IS ABOVE WHAT NOT TO USE???_________________
Mine is NOT an earlier version of MacKeeper. I installed in 2012, so it is not clear... but I am guessing that that is what he meant?? Then I read on, & am not sure about a lot of things.
I have NO IDEA whether I have encrypted anything via MacKeeper. I don't even know what encrypting is or whether MacKeeper DID THAT WITHOUT MY KNOWLEDGE??
Uninstalling earlier versions of MacKeeper
If you have a version of MacKeeper earlier than MacKeeper 2012 you should follow the procedure below. You may not find ALL of the following, but any you do find should be removed.
Preparation:
i. Again, a warning: if you have used MacKeeper’s encryption feature, be sure to unencrypt before you uninstall MacKeeper.
Time Machine
ii. If you use Time Machine, leave it connected and do the Time Machine Step (TM step) where indicated. Instructions for the TM step are given in the box in step 1 below.
Clones
iii. If you use a clone without archiving, disconnect the clone and run the procedure below on your internal disk. When it is complete and you have verified everything is OK, connect your clone and wipe the partition using Disk Utility. Then make a new clone.
iv. If you use a clone with archiving, reboot into your clone now and run the procedure below on the clone first. Then shutdown you computer, disconnect the clone from the system and reboot into your internal drive. Run the entire procedure again on your internal drive.
v. If you have anything in the Trash, empty it now before you start.
My Time Machine says "IT IS NOT CONFIGURED", "BROWSE OTHER TIME MACHINE DISKS... (There are none there, only empty window.) & "OPEN TIME MACHINE PREFERENCES". WHEN I TURN IT ON, A BLANK WINDOW OPENS UP WITH ONLY ONE OPTION, "TURN YOUR TIME CAPSULE ON".
I DON'T HAVE THE TIME MACHINE CAPSULE!So, what do I do here?___________
I DO have TIME MACHINE IN THE UPPER BAR & THE ICON IN MY DOCK.
I don't know what a "clone" is... sort of, (thought it was an "alias/copy", but am probably wrong?? I have no idea whether it is being used or not?? There may be tons of clones on my Mac, or are they "aliases" from the original issue ~3 years ago. NONE that I intentionally put in!
How do I know if I am "archiving" and/or how do I disconnect the clone... "to run the procedure below" on my internal disk?
Then How Do I Connect My Clone, (when I don't even know what it is?) and wipe WHAT PARTITION? (I don't have access to my Time Machine or my EXTERNAL HD, (MyBook) where the Time Machine HAD been backing up my Mac. My MyBook won't even show up on my desktop.
WHAT IS THE CLONE? .... "IF I USE A CLONE WITHOUT ARCHIVING" VS. "IF I USE A CLONE WITH ARCHIVING".... I HAVE NO IDEA WHAT THIS MEANS???
I HAVE STUFF IN TRASH, BUT AM AFRAID TO DELETE IT... SO DO I BRING IT ALL BACK TO MY MAC? I have so many things brought back from trash.
The Uninstall Procedure:
Once you have prepared everything as above, you’re ready to start the uninstall procedure.
1. If MacKeeper is running, quit it. From the sidebar in any Finder window, choose your hard disk icon and go to your Library folder. Look in the Application Support folder for the folder inside it called ‘MacKeeper’:
/Library/Application Support/MacKeeper
Click on the folder once.
TM Step
If you are using Time Machine do the TM Step now.
Enter Time Machine via the TM icon on your menubar at the top of your screen.
Click the little gear/cog in the Finder window and choose ‘delete all backups of xxx file’.
Enter your Admin password to confirm the delete. Exit Time Machine and then…
If you don’t use TM or after you have completed the TM step, hold down the ‘command’ key and press the ‘delete’ key once to send the file to the trash.
HELP!!------>
I DO USE TIME MACHINE, BUT IT IS NOT WORKING NOW NOR IS THE EXTERNAL HDI CAN'T ENTER TIME MACHINE!
And in Finder, what is the "gear/cog"?? And what are the xxx files? Are they all MacKeeper files???
Why would one complete the TM step IF one doesn't USE TM or have access to it.
*****How do I get my TM back???? _____________
2. Still in Library, look for and trash any of these you find in the same way, remembering if you have Time Machine to do the TM step first in each case:
/Library/LaunchDaemons/com.zeobit.MacKeeper.AntiVirus
/Library/LaunchDaemons/com.zeobit.MacKeeper.plugin.AntiTheft.daemon
3. If you are using Lion, use the ‘Go’ menu in Finder’s menubar and hold down the ‘option’ key. Choose ‘Library’ from the menu (yes, this is a different Library folder from the one you were just in). If you are using Snow Leopard or Leopard, just click on the little ‘Home‘ icon in the Finder sidebar and navigate to the Library. Then trash any and all of these that you find, remembering to do the TM step (if applicable) first in each case:
Home/Library/Caches/com.zeobit.MacKeeper
Home/Library/Caches/com.zeobit.MacKeeper.Helper
Home/Library/LaunchAgents/com.zeobit.MacKeeper.Helper
Home/Library/LaunchAgents/com.zeobit.MacKeeper.plugin.Backup.agent
Home/Library/Preferences/com.zeobit.MacKeeper.plist
Home/Library/Preferences/com.zeobit.MacKeeper.Helper.plist
Be careful not to delete the wrong files: only those that have got the words ‘zeobit’, ‘MacKeeper’, ’911′ or ’911bundle’ should be trashed.
Since MY TM is not functioning properly, what do I do? I am so lost?
4. Go to Applications > Utilities > Keychain Access.app and double click on it. Notice the padlock in the window is up there on the left, rather than down the bottom. Click on it and enter your admin password. Now go through all the items in the ‘Keychains‘ list (such as Login, System, Root) with ‘All items’ selected in the ‘Category’ list. Anything you find related to ‘MacKeeper’ or ‘zeobit’, click on it, then choose Edit > Delete from the menu.
(Thanks to Al for also mentioning this point in the Comments below! ).
5. Open the Activity Monitor utility (Applications>Utilities>Activity Monitor.app), make sure ‘All Processes’ is showing in the drop down menu just over on the right of the dialogue box, then scroll down the list and see if any processes called ‘MacKeeper’, ‘zeobit’ or ’911 bundle’ are still running. Older versions of MacKeeper may have a ‘WINE’ process running, so also look for ‘wine’. Anything you find, click on it and hit ‘Quit Process’ (top left).
6. Go to your Applications folder from a Finder window and select MacKeeper (if you have Time Machine, do the TM step now). Then, hold down ‘command’ and press ‘delete’ once. If you assigned MacKeeper to be pinned in the Dock, be sure to also drag the icon off the Dock and release it anywhere over the desktop. It will, satisfyingly, disappear in the ‘poof’ of a cloud.
Time Machine issue for me again!!
7. When you’re done filling up your trash can with all this junk, click on the Finder> Empty Trash.
8. Go to
 > System Preferences > Users & Groups (or ‘Accounts’ for Snow L) | Login Items
If you see anything to do with MacKeeper in the list of items there, highlight it, then click the little minus ‘-’ button near the bottom of the list.
9. Restart your Mac. Everything should be back to normal, but check the Activity Monitor one last time to be sure.
10. After restart, be sure to fix your system permissions. If you encounter any problems that you did not have before, fix the ACLs too.
**If you are running a clone, remember to follow the instructions given above under “Preparation: Clones”.**
Supplementary: If you have a problem with MacKeeper pop-ups while using your browser, try clearing out the caches, like this:
In Safari menubar, choose ‘Safari > Reset Safari’. Make sure all the options are checked.
This will not only clear out your caches, but everything else stored by the browser. Don’t worry, it won’t affect your bookmarks, but it will reset your ‘top sites’ and history.
In Firefox menubar, choose ‘Tools > Clear Recent History…’ and choose ‘Everything’. Again, it’ll clear everything out but won’t delete your bookmarks.
Obviously, if you use any other browsers like Opera or something you’ll have to find the same options for those too.
Related Posts
block MacKeeper and other browser ads
NOTES
1. If you have any problems carrying out the steps, try starting your Mac up in Safe mode, and then running the procedure.
2. You can safely ignore any MacKeeper files that are in the Logs, BOM or Receipts folders.
3. If you have only downloaded the MacKeeper package but not ran the installer, you only need to send the .pkg file in your Downloads folder to the Trash. That’s it!
Acknowledgements
This post has been refined and improved over time thanks to suggestions and replies made in the Comments and on Apple Support Communities. Thanks especially to Al, Lyndon and Jack.
BDAqua, Is there any way for me to directly contact PhilStokes directly to have him read all that we have shared here, since he is the writer & obviously has had the experience & could possibly "Walk me through this" & answer some of my questions & asuage my fears??
Anything that YOU can do to continue to help is also greatly appreciated. I am doing nothing until I know what to do, with all the other issues that are going on, I just don't know what to do?? It is NOT simple as you can see!
BDAqua wrote:
As for the site that you gave me to Un-Install... are you sure? As that is MacKeeper/Zeobits' site! Andyou & everyone else said NOT to use their Un-Install???
OH Oh, if true something is redirecting your request, & guess what I think is doing it, or are you clicking on the zeobit kink on that page???
You should be seeing this...
Wonder why no one else is responding to my questions???
Feel free to start a new question, perhaps that'll work!?
Find that I am missing the "driver" for my external HD, & since it is so old, I can't find how to do it online.
You shouldn't need any SW to use the drive!???
BDAqua wrote:
As for the site that you gave me to Un-Install... are you sure? As that is MacKeeper/Zeobits' site! Andyou & everyone else said NOT to use their Un-Install???
OH Oh, if true something is redirecting your request, & guess what I think is doing it, or are you clicking on the zeobit kink on that page???
You should be seeing this...
Wonder why no one else is responding to my questions???
Feel free to start a new question, perhaps that'll work!?
Find that I am missing the "driver" for my external HD, & since it is so old, I can't find how to do it online.
You shouldn't need any SW to use the drive!???
BDAqua wrote:
As for the site that you gave me to Un-Install... are you sure? As that is MacKeeper/Zeobits' site! Andyou & everyone else said NOT to use their Un-Install???
OH Oh, if true something is redirecting your request, & guess what I think is doing it, or are you clicking on the zeobit kink on that page???
You should be seeing this...
Wonder why no one else is responding to my questions???
Feel free to start a new question, perhaps that'll work!?
Find that I am missing the "driver" for my external HD, & since it is so old, I can't find how to do it online.
You shouldn't need any SW to use the drive!???
BDAqua wrote:
As for the site that you gave me to Un-Install... are you sure? As that is MacKeeper/Zeobits' site! Andyou & everyone else said NOT to use their Un-Install???
OH Oh, if true something is redirecting your request, & guess what I think is doing it, or are you clicking on the zeobit kink on that page???
You should be seeing this...
Wonder why no one else is responding to my questions???
Feel free to start a new question, perhaps that'll work!?
Find that I am missing the "driver" for my external HD, & since it is so old, I can't find how to do it online.
You shouldn't need any SW to use the drive!???

Can I remove a SPECIFIC file from the "Recents" list?

     As far as I can see, Adobe Reader for Android has only the option of clearing ALL the files in the "Recents" list. It doesn't have the option of removing a specific file from the "Recents" list.
     Maybe I'm just missing the option I'm talking about or Adobe Reader doesn't really have that feature.
     Sensible answers to my question will be greatly appreciated. Thanks!

Hi iSTULIN
I assume you can delete the complete list, not the single file ...
Please check the below link : http://blogs.adobe.com/readermobile/2011/09/09/faqs-for-adobe-reader-on-android/
You can raise a feature request on the below link : https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Can we remove the Continue button from Quiz Results?

Hi Everyone,
Is there any way to remove the continue button from the Quiz Results page?
I have a captivate file in which there is a Thank you slide at the end after the Quiz results slide. Now, here's the problem - The user is just finishing the quiz and closing the browser tab - which is not showing the completion status inside LMS. The user must need to view the Thank you slide - so that the LMS can respond as "Completed" status.
Now, I want to remove the Continue button on Quizzes result slide so that user doesnot need to go ahead to next slide to complete the course. And i will put the Thank You message here in Quizzes result slide only.
Can I remove the continue button from the Quiz Results page so that it can be the last slide?
Regards
Vikas Sharma

Removing the Continue button from the Quiz Results slide is NOT a good idea in my experience. Clicking the Continue button triggers functions in Captivate to terminate the quiz and commit the score to the LMS. If this button is not clicked, Captivate may not be sure the person has decided they're done with the quiz and wants their score to be captured by the LMS at that point. There are often other buttons on the Quiz Results slide to offer the user the option of Retaking or Reviewing the Quiz. Only the Continue button is designed to take them further beyond the Quiz Result slide.
Like yourself, I have also found learners often fail to grasp the importance of the Continue button and don't realise they need to do something extra (beyond reaching the Quiz Results slide) in order for their score to be captured. So what I usually do is rename the Continue button to something more meaningful such as: Register Your Score, or Record Quiz Results Now. Having a name like this (and making the button nice and large and bold so that it's not easy to miss) clearly tells people that they need to click this button if they want their score to be retained. It's just a simple change, but it practically eliminated all issues we had with people just closing down their browser when they saw the Quiz Results.

How-can-i-remove-my-skype-name-from-the-sign-in-sc...

Guys this is absolute rubbish feature of the login application where people's login names get recorded in the dropdown menu. Is there any more permanent way of getting rid of this annoying privacy intrusive "feature"? I would like to have a profile with a username that is not going to appear at airports and my grandma's laptop after I log out of skype and no I do not want to go digging for app files to remove my entire history on each and every machine I use as suggested by your help files. Could you please advise if I'm missing something here?
https://support.skype.com/en-gb/faq/FA11070/how-can-i-remove-my-skype-name-from-the-sign-in-screen-i...

Unfortunately, the option to remove that feature is not available.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

RAID is missing in Media Browser

RAID is missing from the Media Browser. I can see the RAID icon (AM VIDEO) in the bin but can see it in the file directory. Double clicking on the icon doesn't open the RAID. My work around is to place an alias of a directory needed from the RAID on the desktop.
RAID is an OWC Mercury Rack Pro and it's visible and fully functional in the finder. Problem occurs in CC and CC14
Mac Pro 5,1, 10.9.3

I've just had it happen too. A brand new OWC RAID 1 drive (less than a week old) has suddenly, under Pr 2014, lost the ability to see this drive. When it arrived I formatted it with Apple's Disk Utility. Adobe Premiere has been working fine until this version. Now Premiere cannot see this drive in media browser, while the Finder can, and DU reports no problems, and neither does Disk Warrier. The drive seems fine. But Adobe can't see it.
Given the variety of people discussing this, here and on other boards, I'm thinking that there is a bug with Media Browser. I now have to *reformat* my drive, which means hours of moving files off to another drive and back on. If this is a bug, we need to know what's happening! I will be *very* unwilling to upgrade to the next version of Adobe software given this situation!
Model Name: iMac
Model Identifier: iMac13,2
Processor Name: Intel Core i7
Processor Speed: 3.4 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 16 GB
Boot ROM Version: IM131.010A.B05
SMC Version (system): 2.11f14
OS X 10.9.5 (13F34)
Graphics NVIDIA GeForce GTX 680MX 2048 MB

Missing mailboxes: upgraded from Mac OS 10.6.2 to 10.8.4

hi, I upgraded from Mac OS 10.6.2 to 10.8.4 and mailboxes are missing. I tried using IMPORT - it does not see those folders which i could easily see using using 10.6.2. Now, the /library/mail folder is not visible when i use FINDER.
Somebody told me if i hold the OPTION key when using the GO-TO it will see files that have been made invisible - but this does not work on my mac.
can anybody help?
many thanks
david

Holding option doesn't show invisible files.
Holding Option allows access to the Library from the Go menu in Finder.
Always back up, first.
Check to make sure the mailboxes still exist in the user/Library/Mail/V2/Mailboxes folder.
If so, you might try removing the Envelope Index from the V2/MailData folder, then start Mail. That will cause it to reindex everything.

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

Removed Missing Dependencies Missing Features, reanalyzed, now 9x more Missing Dependencies....

I'm using the excellent Phil Childs get-scripts Powershell scripts to clear out some Missing Dependencies. There were Missing Feature, MissingSetupFile, and MissingAssembly referencences, all related to the same wsp that is no longer in use and
was retracted. http://get-spscripts.com/2011/06/removing-features-from-content-database.html
I removed some Missing Features, reanalyzed, and the 15 item Missing Dependencies list, instead of shrinking, is now at 134 items.
I’m going to try and figure out cause before I start chugging through these. Any recommendations?
Thanks,
Scott

Hi Scott,
Are these new 134 error messages different from orginal 15 error messages?
We need to check each error message description and do as error message content suggests to solve the issue (e.g. may find the webparts referenced this custom feature and remove unwanted web part from the page).
More articles about the missing dependencies you can take a look.
http://get-spscripts.com/2011/06/diagnosing-missingsetupfile-issues-from.html
http://get-spscripts.com/2011/08/diagnose-missingwebpart-and.html
http://fangdahai.blogspot.com/2014/01/how-to-resolve-missing-server-side.html
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Is there a way to remove the command R from opening my media browser?

I use command + t quite often when I am adjusting a track to sync with my drums, and once in a while I will accidentally click the command + R, which opens up my media browser. This little accident ALWAYS takes about 20 - 30 seconds to open, which would be fine once in a while, but once this happens the first time Garageband always takes a lot longer to respond to my editing until I restart the program, which is a huge hassle when I am on a roll. I would just like to remove the key command from allowing this to happen, if there is some way to do this I would be very happy to know how to get this taken care of.
Thanks!
Erik

Brilliant, HangTime! I missed that menu - I was looking in the "Windows" menu.
This works:
I added "GarageBand.app" to the "Application Shortcut" section (press "+") and added new shortcuts ⇧⌘R to Show Media Browser and Hide Media Browser.
Now the ⌘R does not do anything any longer
(You have to log off and on, or to force quit the Finder and restart GarageBand for the changes to take effect! )
Now it is "⇧⌘R" - you can use any key combination you like instead.

How do you remove root level processes from launching at startup?

Trying to remove Missing Sync application processes from Leopard. No longer using that application, but it loads these processes at startup, and I want to remove them. How do I do this?

Then, I suggest running the uninstaller (if it exists) or contacting the developer and finding out where the installer puts its stuff. BTW, if you can identify the daemons, you should be able to do a Spotlight search for them and find the scripts that launch them. I don't use any of those devices, so I can't point you in the right direction.

RAID removing missing/damaged slice from mirror

Similar Messages

Maybe you are looking for