Raid system read-only

i have 5T Raid system, its ntfs fomat, windows 7 can use it and working fine, but i connect to my mac pro , its read- only .
my external harddrive(ntfs) also can working . any one can help?

You've answered your own question, really - NTFS is a read-only drive format on the Mac. You will need to either use NTFS-3G to write to your volumes, or reformat the drives in a compatible format.
Matt

Similar Messages

  • RAID Goes Read-Only (-50 Error)

    I have a first-revision xserve raid, connected via a Vixel 335 to 4 servers, zoned so there are two on each RAID controller, with LUN masking allowing one volume to appear on each server.
    One pair of servers tends to break each other whenever something happens. I restart one server and the other one stops being able to write to the xserve raid. Any write attempt results in a -50 error. Then if I restart the one that went bad, it breaks the other the same way. If I restart them at the same time, it usually works, but sometimes does not, sometimes the volumes won't even mount. RAID admin loggs a "Fiber LIP" when either server restarts. That seems normal, but it why does the RAID stop allowing writes on the other volume? Anyone seen anything like this before?
    This pair of servers are second-revision G4 xserves with the pre-installed FC cards.
    Thanks for any input.
    Mark Mayfield
    Roseville Area Schools
    Network Manager

    I did a little more research and there are quite a few people who've seen this error.  I don't think it's the drive. 
    I suspect the controller in the enclosure, a jmicron 0x2336, is responsible for my problems.  It looks like Linux and FreeBSD both had software updates to work around bugs in the controller.  If OS X did not get updated, it would explain everything. The drive sleeps and then won't wake up fully and OS X marks it as in error and goes read only. 
    The enclosure is a Thermaltake Silver II USB + esata.  It looks like a lot of people have had similar problems with them.  I saw posts on macrumors, adobe's support forums, etc.

  • Every boot requires fsck. Makes file system read-only

    Suddenly when I booted my Arch I got a message saying that there was a corruption in my /home and /var directories. The same message suggested to pass fsck as solution. The booting process hanged there without entering to the emergency login. I took a live cd an executed a fsck in all my ext4 file system and “repaired” the problem.
    When I could log into the system if, for example, I want to write a file o do any operation (sudo for example) I get the message:
    sudo: unable to open /var/db/sudo/lola/0: Read-only file system
    If I reboot the PC again, the cycle begins again, this is: errors, asking for fsck, then, read-only FS.
    Some info that you may find useful:
    fstab
    /dev/sda3 / ext4 defaults 0 1
    /dev/sda5 /var ext4 defaults 0 1
    /dev/sda6 swap swap defaults 0 0
    /dev/sda7 /home ext4 defaults,user_xattr 0 1
    df -h
    Filesystem Size Used Avail Use% Mounted on
    rootfs 15G 7.2G 6.6G 52% /
    dev 1.9G 0 1.9G 0% /dev
    run 1.9G 740K 1.9G 1% /run
    /dev/sda3 15G 7.2G 6.6G 52% /
    tmpfs 1.9G 536K 1.9G 1% /dev/shm
    tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
    tmpfs 1.9G 80K 1.9G 1% /tmp
    /dev/sda7 80G 39G 37G 52% /home
    /dev/sda5 6.8G 3.7G 2.8G 58% /var
    /dev/sda2 358G 334G 25G 94% /media/windows
    systemctl
    UNIT LOAD ACTIVE SUB DESCRIPTION
    proc-sys-fs-binfmt_misc.automount loaded active running Arbitrary Executable File Formats File System Au
    sys-devices-pci...000:00:1b.0-sound-card0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1b.0/sound/card0
    sys-devices-pci...0-0000:02:00.0-net-eth0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.
    sys-devices-pci...-0000:03:00.0-net-wlan0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.
    sys-devices-pci...-1:0:0:0-block-sda-sda1.device loaded active plugged TOSHIBA_MK5055GSX
    sys-devices-pci...-1:0:0:0-block-sda-sda2.device loaded active plugged TOSHIBA_MK5055GSX
    sys-devices-pci...-1:0:0:0-block-sda-sda3.device loaded active plugged TOSHIBA_MK5055GSX
    sys-devices-pci...-1:0:0:0-block-sda-sda4.device loaded active plugged TOSHIBA_MK5055GSX
    sys-devices-pci...-1:0:0:0-block-sda-sda5.device loaded active plugged TOSHIBA_MK5055GSX
    sys-devices-pci...-1:0:0:0-block-sda-sda6.device loaded active plugged TOSHIBA_MK5055GSX
    sys-devices-pci...-1:0:0:0-block-sda-sda7.device loaded active plugged TOSHIBA_MK5055GSX
    sys-devices-pci...1:0:0-1:0:0:0-block-sda.device loaded active plugged TOSHIBA_MK5055GSX
    sys-devices-pci...5:0:0-5:0:0:0-block-sr0.device loaded active plugged TSSTcorp_CDDVDW_TS-L633C
    sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
    sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
    tail -100 /var/log/errors.log
    Jan 23 14:43:52 localhost kernel: [ 283.449542] ata2.00: error: { UNC }
    Jan 23 14:43:52 localhost kernel: [ 283.451224] end_request: I/O error, dev sda, sector 513442820
    Jan 23 14:43:52 localhost kernel: [ 283.451228] Buffer I/O error on device sda2, logical block 63796096
    Jan 23 14:43:56 localhost kernel: [ 287.394421] ata2.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0
    Jan 23 14:43:56 localhost kernel: [ 287.394426] ata2.00: irq_stat 0x40000001
    Jan 23 14:43:56 localhost kernel: [ 287.394430] ata2.00: failed command: READ FPDMA QUEUED
    Jan 23 14:43:56 localhost kernel: [ 287.394435] ata2.00: cmd 60/08:00:00:84:9a/00:00:1e:00:00/40 tag 0 ncq 4096 in
    Jan 23 14:43:56 localhost kernel: [ 287.394435] res 41/40:08:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
    Jan 23 14:43:56 localhost kernel: [ 287.394438] ata2.00: status: { DRDY ERR }
    Jan 23 14:43:56 localhost kernel: [ 287.394440] ata2.00: error: { UNC }
    Jan 23 14:43:56 localhost kernel: [ 287.394442] ata2.00: failed command: READ FPDMA QUEUED
    Jan 23 14:43:56 localhost kernel: [ 287.394447] ata2.00: cmd 60/00:08:1f:53:4d/01:00:2d:00:00/40 tag 1 ncq 131072 in
    Jan 23 14:43:56 localhost kernel: [ 287.394447] res 41/40:02:04:84:9a/00:00:1e:00:00/4e Emask 0x9 (media error)
    Jan 23 14:43:56 localhost kernel: [ 287.394449] ata2.00: status: { DRDY ERR }
    Jan 23 14:43:56 localhost kernel: [ 287.394451] ata2.00: error: { UNC }
    Jan 23 14:43:56 localhost kernel: [ 287.394453] ata2.00: failed command: WRITE FPDMA QUEUED
    Jan 23 14:43:56 localhost kernel: [ 287.394458] ata2.00: cmd 61/08:10:7f:6e:b7/00:00:30:00:00/40 tag 2 ncq 4096 out
    Jan 23 14:43:56 localhost kernel: [ 287.394458] res 41/40:02:04:84:9a/00:00:1e:00:00/4e Emask 0x9 (media error)
    Jan 23 14:43:56 localhost kernel: [ 287.394460] ata2.00: status: { DRDY ERR }
    Jan 23 14:43:56 localhost kernel: [ 287.394462] ata2.00: error: { UNC }
    Jan 23 14:43:56 localhost kernel: [ 287.394464] ata2.00: failed command: WRITE FPDMA QUEUED
    Jan 23 14:43:56 localhost kernel: [ 287.394468] ata2.00: cmd 61/90:18:37:42:31/00:00:35:00:00/40 tag 3 ncq 73728 out
    Jan 23 14:43:56 localhost kernel: [ 287.394468] res 41/40:02:04:84:9a/00:00:1e:00:00/4e Emask 0x9 (media error)
    Jan 23 14:43:56 localhost kernel: [ 287.394471] ata2.00: status: { DRDY ERR }
    Jan 23 14:43:56 localhost kernel: [ 287.394472] ata2.00: error: { UNC }
    Jan 23 14:43:56 localhost kernel: [ 287.396122] end_request: I/O error, dev sda, sector 513442820
    Jan 23 14:43:56 localhost kernel: [ 287.396125] Buffer I/O error on device sda2, logical block 63796096
    Jan 23 14:43:56 localhost kernel: [ 287.396179] end_request: I/O error, dev sda, sector 760042271
    Jan 23 14:43:56 localhost kernel: [ 287.396232] end_request: I/O error, dev sda, sector 817327743
    Jan 23 14:43:56 localhost kernel: [ 287.396235] Buffer I/O error on device sda7, logical block 1133175
    Jan 23 14:43:56 localhost kernel: [ 287.396282] end_request: I/O error, dev sda, sector 892420663
    Jan 23 14:44:01 localhost kernel: [ 291.317005] ata2.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
    Jan 23 14:44:01 localhost kernel: [ 291.317010] ata2.00: irq_stat 0x40000008
    Jan 23 14:44:01 localhost kernel: [ 291.317014] ata2.00: failed command: READ FPDMA QUEUED
    Jan 23 14:44:01 localhost kernel: [ 291.317019] ata2.00: cmd 60/08:08:00:84:9a/00:00:1e:00:00/40 tag 1 ncq 4096 in
    Jan 23 14:44:01 localhost kernel: [ 291.317019] res 41/40:08:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
    Jan 23 14:44:01 localhost kernel: [ 291.317022] ata2.00: status: { DRDY ERR }
    Jan 23 14:44:01 localhost kernel: [ 291.317024] ata2.00: error: { UNC }
    Jan 23 14:44:01 localhost kernel: [ 291.318643] end_request: I/O error, dev sda, sector 513442820
    Jan 23 14:44:01 localhost kernel: [ 291.318647] Buffer I/O error on device sda2, logical block 63796096
    Jan 23 14:44:01 localhost kernel: [ 291.546162] Aborting journal on device sda7-8.
    Jan 23 14:54:20 localhost [ 7.837917] systemd[1]: Socket service syslog.service not loaded, refusing.
    Jan 23 14:54:20 localhost [ 7.838515] systemd[1]: Failed to listen on Syslog Socket.
    Jan 23 14:54:21 localhost kernel: [ 10.930157] [drm:intel_panel_setup_backlight] *ERROR* Failed to get maximum backlight value
    Jan 23 14:54:34 localhost dhcpcd[564]: dhcpcd not running
    Jan 23 14:54:35 localhost dhcpcd[649]: dhcpcd not running
    Jan 23 14:54:35 localhost dhcpcd[662]: dhcpcd not running
    Jan 23 14:58:04 localhost su: pam_unix(su:auth): conversation failed
    Jan 23 17:00:38 localhost systemd[1]: Failed to start Netcfg multi-profile daemon.
    Jan 23 17:00:39 localhost [ 7.790297] systemd[1]: Socket service syslog.service not loaded, refusing.
    Jan 23 17:00:39 localhost [ 7.790891] systemd[1]: Failed to listen on Syslog Socket.
    Jan 23 17:00:39 localhost kernel: [ 11.363432] [drm:intel_panel_setup_backlight] *ERROR* Failed to get maximum backlight value
    Jan 23 17:00:55 localhost dhcpcd[612]: dhcpcd not running
    Jan 23 17:00:55 localhost dhcpcd[618]: dhcpcd not running
    Jan 23 17:00:55 localhost dhcpcd[626]: dhcpcd not running
    Jan 23 17:01:23 localhost su: pam_unix(su:auth): conversation failed
    Jan 23 17:04:55 localhost kernel: [ 274.346016] ata2.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0
    Jan 23 17:04:55 localhost kernel: [ 274.346022] ata2.00: irq_stat 0x40000008
    Jan 23 17:04:55 localhost kernel: [ 274.346025] ata2.00: failed command: READ FPDMA QUEUED
    Jan 23 17:04:55 localhost kernel: [ 274.346031] ata2.00: cmd 60/70:08:e8:83:9a/00:00:1e:00:00/40 tag 1 ncq 57344 in
    Jan 23 17:04:55 localhost kernel: [ 274.346031] res 41/40:70:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
    Jan 23 17:04:55 localhost kernel: [ 274.346034] ata2.00: status: { DRDY ERR }
    Jan 23 17:04:55 localhost kernel: [ 274.346035] ata2.00: error: { UNC }
    Jan 23 17:04:55 localhost kernel: [ 274.348151] end_request: I/O error, dev sda, sector 513442820
    Jan 23 17:04:55 localhost kernel: [ 274.348154] Buffer I/O error on device sda2, logical block 63796096
    Jan 23 17:04:55 localhost kernel: [ 274.348159] Buffer I/O error on device sda2, logical block 63796097
    Jan 23 17:04:55 localhost kernel: [ 274.348162] Buffer I/O error on device sda2, logical block 63796098
    Jan 23 17:04:55 localhost kernel: [ 274.348164] Buffer I/O error on device sda2, logical block 63796099
    Jan 23 17:04:55 localhost kernel: [ 274.348166] Buffer I/O error on device sda2, logical block 63796100
    Jan 23 17:04:55 localhost kernel: [ 274.348168] Buffer I/O error on device sda2, logical block 63796101
    Jan 23 17:04:55 localhost kernel: [ 274.348171] Buffer I/O error on device sda2, logical block 63796102
    Jan 23 17:04:55 localhost kernel: [ 274.348173] Buffer I/O error on device sda2, logical block 63796103
    Jan 23 17:04:55 localhost kernel: [ 274.348176] Buffer I/O error on device sda2, logical block 63796104
    Jan 23 17:04:55 localhost kernel: [ 274.348178] Buffer I/O error on device sda2, logical block 63796105
    Jan 23 17:04:59 localhost kernel: [ 278.257533] ata2.00: exception Emask 0x0 SAct 0x84 SErr 0x0 action 0x0
    Jan 23 17:04:59 localhost kernel: [ 278.257539] ata2.00: irq_stat 0x40000008
    Jan 23 17:04:59 localhost kernel: [ 278.257543] ata2.00: failed command: READ FPDMA QUEUED
    Jan 23 17:04:59 localhost kernel: [ 278.257549] ata2.00: cmd 60/08:38:00:84:9a/00:00:1e:00:00/40 tag 7 ncq 4096 in
    Jan 23 17:04:59 localhost kernel: [ 278.257549] res 41/40:08:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
    Jan 23 17:04:59 localhost kernel: [ 278.257551] ata2.00: status: { DRDY ERR }
    Jan 23 17:04:59 localhost kernel: [ 278.257553] ata2.00: error: { UNC }
    Jan 23 17:04:59 localhost kernel: [ 278.259233] end_request: I/O error, dev sda, sector 513442820
    Jan 23 17:05:03 localhost kernel: [ 282.157929] ata2.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x0
    Jan 23 17:05:03 localhost kernel: [ 282.157934] ata2.00: irq_stat 0x40000008
    Jan 23 17:05:03 localhost kernel: [ 282.157938] ata2.00: failed command: READ FPDMA QUEUED
    Jan 23 17:05:03 localhost kernel: [ 282.157943] ata2.00: cmd 60/08:10:00:84:9a/00:00:1e:00:00/40 tag 2 ncq 4096 in
    Jan 23 17:05:03 localhost kernel: [ 282.157943] res 41/40:08:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
    Jan 23 17:05:03 localhost kernel: [ 282.157946] ata2.00: status: { DRDY ERR }
    Jan 23 17:05:03 localhost kernel: [ 282.157947] ata2.00: error: { UNC }
    Jan 23 17:05:03 localhost kernel: [ 282.159582] end_request: I/O error, dev sda, sector 513442820
    Jan 23 17:05:03 localhost kernel: [ 282.159588] Buffer I/O error on device sda2, logical block 63796096
    Jan 23 17:05:07 localhost kernel: [ 286.069482] ata2.00: exception Emask 0x0 SAct 0x40 SErr 0x0 action 0x0
    Jan 23 17:05:07 localhost kernel: [ 286.069487] ata2.00: irq_stat 0x40000008
    Jan 23 17:05:07 localhost kernel: [ 286.069491] ata2.00: failed command: READ FPDMA QUEUED
    Jan 23 17:05:07 localhost kernel: [ 286.069496] ata2.00: cmd 60/08:30:00:84:9a/00:00:1e:00:00/40 tag 6 ncq 4096 in
    Jan 23 17:05:07 localhost kernel: [ 286.069496] res 41/40:08:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
    Jan 23 17:05:07 localhost kernel: [ 286.069499] ata2.00: status: { DRDY ERR }
    Jan 23 17:05:07 localhost kernel: [ 286.069501] ata2.00: error: { UNC }
    Jan 23 17:05:07 localhost kernel: [ 286.071955] end_request: I/O error, dev sda, sector 513442820
    Jan 23 17:05:07 localhost kernel: [ 286.071959] Buffer I/O error on device sda2, logical block 63796096
    Waiting for your help.
    Thank you.

    oh god, if my HD dies I will kill myself.
    I did the SMART, short and long (following the ArchWiki) and got (will post the long as soon it ends):
    === START OF READ SMART DATA SECTION ===
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed without error 00% 7967 -
    With more details:
    smartctl -a /dev/sda
    smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.6.9-1-ARCH] (local build)
    Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
    === START OF INFORMATION SECTION ===
    Model Family: Toshiba 2.5" HDD MK..55GSX
    Device Model: TOSHIBA MK5055GSX
    Serial Number: 897JC07RT
    LU WWN Device Id: 5 000039 1f3c01f05
    Firmware Version: FG001M
    User Capacity: 500,107,862,016 bytes [500 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS (minor revision not indicated)
    SATA Version is: SATA 2.6, 3.0 Gb/s
    Local Time is: Wed Jan 23 13:46:24 2013 PYST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 249) Self-test routine in progress...
    90% of test remaining.
    Total time to complete Offline
    data collection: ( 120) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 183) minutes.
    SCT capabilities: (0x0039) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
    2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
    3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1320
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1807
    5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 7
    7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
    8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
    9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 7967
    10 Spin_Retry_Count 0x0033 136 100 030 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1789
    191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 97
    192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 33
    193 Load_Cycle_Count 0x0032 082 082 000 Old_age Always - 189405
    194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 39 (Min/Max 9/50)
    196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
    197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 9
    198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    220 Disk_Shift 0x0002 100 100 000 Old_age Always - 87
    222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6001
    223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
    226 Load-in_Time 0x0026 100 100 000 Old_age Always - 320
    240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
    SMART Error Log Version: 1
    ATA Error Count: 634 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.
    Error 634 occurred at disk power-on lifetime: 7967 hours (331 days + 23 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    40 41 02 04 84 9a 6e Error: UNC at LBA = 0x0e9a8404 = 245007364
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    60 08 00 00 84 9a 40 08 03:31:25.735 READ FPDMA QUEUED
    ea 00 00 00 00 00 a0 00 03:31:25.714 FLUSH CACHE EXT
    61 18 08 07 82 b1 40 08 03:31:25.714 WRITE FPDMA QUEUED
    61 08 00 0f 7d 31 40 08 03:31:25.714 WRITE FPDMA QUEUED
    ea 00 00 00 00 00 a0 00 03:31:25.682 FLUSH CACHE EXT
    Error 633 occurred at disk power-on lifetime: 7967 hours (331 days + 23 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    40 41 02 04 84 9a 6e Error: UNC at LBA = 0x0e9a8404 = 245007364
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    60 08 00 00 84 9a 40 08 03:31:21.832 READ FPDMA QUEUED
    61 18 00 27 81 b1 40 08 03:31:21.451 WRITE FPDMA QUEUED
    61 18 00 27 77 b1 40 08 03:31:20.425 WRITE FPDMA QUEUED
    61 18 00 2f 8c b1 40 08 03:31:19.451 WRITE FPDMA QUEUED
    61 18 00 ef 81 b1 40 08 03:31:18.445 WRITE FPDMA QUEUED
    Error 632 occurred at disk power-on lifetime: 7967 hours (331 days + 23 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    40 41 0a 04 84 9a 6e Error: UNC at LBA = 0x0e9a8404 = 245007364
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    60 00 00 07 7f 09 40 08 03:16:43.581 READ FPDMA QUEUED
    60 08 08 00 84 9a 40 08 03:16:43.559 READ FPDMA QUEUED
    60 00 00 a7 5b 09 40 08 03:16:43.552 READ FPDMA QUEUED
    ef 10 02 00 00 00 a0 00 03:16:43.551 SET FEATURES [Reserved for Serial ATA]
    27 00 00 00 00 00 e0 00 03:16:43.551 READ NATIVE MAX ADDRESS EXT
    Error 631 occurred at disk power-on lifetime: 7967 hours (331 days + 23 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    40 41 0a 04 84 9a 6e Error: UNC at LBA = 0x0e9a8404 = 245007364
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    60 00 00 a7 5b 09 40 08 03:16:39.713 READ FPDMA QUEUED
    60 08 00 87 b5 25 40 08 03:16:39.705 READ FPDMA QUEUED
    60 00 00 8f 60 05 40 08 03:16:39.693 READ FPDMA QUEUED
    60 08 00 e7 d4 54 40 08 03:16:39.692 READ FPDMA QUEUED
    60 08 08 00 84 9a 40 08 03:16:39.678 READ FPDMA QUEUED
    Error 630 occurred at disk power-on lifetime: 7967 hours (331 days + 23 hours)
    When the command that caused the error occurred, the device was active or idle.
    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    40 41 12 04 84 9a 6e Error: WP at LBA = 0x0e9a8404 = 245007364
    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    61 08 08 0e 4c b6 40 08 03:16:35.710 WRITE FPDMA QUEUED
    61 08 08 0e 4c b6 40 08 03:16:35.710 WRITE FPDMA QUEUED
    61 08 08 0e 4c b6 40 08 03:16:35.709 WRITE FPDMA QUEUED
    61 98 18 8f 41 31 40 08 03:16:35.709 WRITE FPDMA QUEUED
    61 08 08 0e 4c b6 40 08 03:16:35.708 WRITE FPDMA QUEUED
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed without error 00% 7967 -
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    Is there an equivalent to Solaris iostat -En in Linux? Havent found any. Remember that I can't install anything: read-only FS
    Last edited by gromlok (2013-01-23 16:47:35)

  • How can we make SAP system READ ONLY !!!!!

    Hi, we have an SAP R/3 4.6 C Application. We need to take the system for read only state means we don’t want the users to allow any update for the system but they should be able to view the data what they have created. Mean while we don’t want the database to be taken in read only mode as we the administrators or the users might want to update their password information.
    It would be a big help if some one can through some tips on how we achieve this.
    Thanks much in advance.
    Guru

    Hi
             Please make the database in READ ONLY MODE. This will help. If it is an oracle database then.
    Open a Database in Read-Only Mode
    You can open any database in read-only mode to prevent its data from being modified by user transactions. Read-only mode restricts database access to read-only transactions, which cannot write to the datafiles or to the redo log files.
    Disk writes to other files, such as control files, operating system audit trails, trace files, and alert files, can continue in read-only mode. Temporary tablespaces for sort operations are not affected by the database being open in read-only mode. However, you cannot take permanent tablespaces offline while a database is open in read-only mode. Also, job queues are not available in read-only mode.
    Read-only mode does not restrict database recovery or operations that change the database's state without generating redo data. For example, in read-only mode:
    Datafiles can be taken offline and online
    Offline datafiles and tablespaces can be recovered
    The control file remains available for updates about the state of the database
    One useful application of read-only mode is that standby databases can function as temporary reporting databases
    Opening a Database in Read-Only Mode
    Opening a database in read-only mode enables you to query an open database while eliminating any potential for online data content changes. While opening a database in read-only mode guarantees that datafile and redo log files are not written to, it does not restrict database recovery or operations that change the state of the database without generating redo. For example, you can take datafiles offline or bring them online since these operations do not effect data content.
    If a query against a database in read-only mode uses temporary tablespace, for example to do disk sorts, then the issuer of the query must have a locally managed tablespace assigned as the default temporary tablespace. Otherwise, the query will fail. This is explained in "Creating a Locally Managed Temporary Tablespace".
    Ideally, you open a database in read-only mode when you alternate a standby database between read-only and recovery mode. Be aware that these are mutually exclusive modes.
    The following statement opens a database in read-only mode:
    ALTER DATABASE OPEN READ ONLY;
    You can also open a database in read-write mode as follows:
    ALTER DATABASE OPEN READ WRITE;
    However, read-write is the default mode.
    Regards

  • RAID mounts read-only now

    hi all,
    After doing an in-place upgrade to 10.6, an attached RAID device, connected via an Apple Fibre Channel HBA, now mounts as read-only. It is a shared device using Server Admin.
    The message specifically was: "Mac Os X can't repair the disk (disk name). YOu can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat as soon as you can."
    Backing up isn't really an option at this point, as this is a huge repository of video, and I have no other device that could hold all the data.
    Any thoughts out there as to why this may have happened, and what I can do to get it back to normal?

    If you have run Disk Utility and it kicked back an 'invalid sibling link' error you may have luck with the following link - http://www.macosxhints.com/article.php?story=20070204093925888.
    By your description it sounds like this is your only copy, even if you can fix the original problem you may need to erase the drive to eliminate a possible corruption in the future. I recommend Data Rescue 3 if you are sunk and cannot repair the damaged drive structure. It's not a free application but it can easily pay for itself by recovering lost or damaged files. Although it can recover data from one partition to another (expert mode) you will need another drive of sufficient capacity for it to copy the rescued files to.
    Another application that assists with data recovery is DiskWarrior. It can repair a damaged directory with the data in place, but I haven't used the software for some time to give you much of a detailed description. Both applications can be researched on the net, you will find people who have had good and bad experiences with both.

  • Filesystem read only[Solved]

    hello
    i install arch but when i want to install a software i can't.
    there is an error "file system read only"
    what should i do?
    Last edited by MHALAH152 (2013-05-12 06:31:48)

    MHALAH152 wrote:
    65kid wrote:just use "defaults", nothing else. Don't add any other options unless you actually know what they are doing.
    I do that.but now i have new problem
    my system can't find internet and i can't install any software
    Then please mark this thread as [Solved] by editing your first post and prepending it to the title.
    Then open a new thread about your networking issue and include information about your network card, drivers, what you have set up in your configs etc...
    https://wiki.archlinux.org/index.php/Fo … ow_to_Post

  • Sudden read-only on RAID array.

    I don't know if this was caused by an update but suddently my /raid is mounted read-only. It doesn't happen right after the mount but suddently after 1 day of uptime or a few hours and the /raid partition is locked again.
    [dezza@dezza ~]$ cd /raid/
    [dezza@dezza raid]$ touch me
    touch: cannot touch `me': Read-only file system
    [dezza@dezza raid]$ df -h
    Filesystem Size Used Avail Use% Mounted on
    /dev/sda1 34G 13G 22G 38% /
    none 1013M 0 1013M 0% /dev/shm
    /dev/sda3 46M 12M 32M 27% /boot
    /dev/md0 466G 364G 103G 79% /raid
    [dezza@dezza raid]$ cat /etc/fstab
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options
    > <dump> <pass>
    none /dev/pts devpts defaults
    0 0
    none /dev/shm tmpfs defaults
    0 0
    # Optical drive, CD/DVD
    /dev/sr0 /media iso9660,udf ro,user,
    noauto,unhide 0 0
    # Root, swap, boot
    /dev/disk/by-label/root / reiserfs defaults
    0 1
    /dev/disk/by-label/swap swap swap defaults
    0 0
    /dev/disk/by-label/boot /boot ext2 defaults
    0 1
    # RAiD BACKUP (2x 500GB Western Digital 7200RPM)
    /dev/md0 /raid reiserfs defaults
    ,sync,user 0 0
    # External 1TB
    /dev/disk/by-label/external /mnt/1tb ntfs-3g u
    ser,sync,exec,uid=1000,gid=1000,locale=en_DK.utf8,force,noauto 0 0
    # VirtualBox
    none /proc/bus/usb usbfs auto,busgid=108,busmode=0775,devgid=108,devmode=0664,lo
    cale=en_DK.utf8 0 0
    [dezza@dezza raid]$
    Last edited by dezza (2009-08-24 14:42:13)

    I had the same problem with a hardware RAID array... I was installing Arch in an previously Redhat server.
    The error I got just just before the read-only thing was related to the filesystem... (Arch was in reiserfs and /home in Redhat is ext3)
    That read-only thing only happened when I was performing heavy load on the raid by rsyncing almost 300GB from RH to the new arch (No error while installing and configure a very complete system).
    I though maybe it was that reiserfs wasn't good enough and I tried with no luck using jfs (the same I succesfully use in LVM in my laptop).
    At the end I decided to get rid of the filesystem difference and It worked using ext3.
    It worked perfectly for almost a month until last week that we had a crash copying 180GB from an USB external drive. We tried again and it worked with no problems. So in conclusion:
    I used ext3 successfully but I have one crashed (after the read-only thing the system becomes useless) documented.
    I know this is not an answer but I hope this help you or maybe help someone to give us a point.
    P.S: The raid arrays are in the same computer (PERC6 I think) using the aacraid driver. One is raid 5 (RH) and the other one is RAID 0 (Arch),

  • Solaris 10  - After installation read only file system

    Dear All,
    I have installed the Solaris 10 on my x86 system with out any problem. The installation was completed successfully. I have followed the installation instructions that are mentioned in the following link.
    http://docs.sun.com/app/docs/doc/817-0544/6mgbagb19?a=view
    I am facing a different problem. I am not able to create even a single file / sub-directory on any of the existing directories. It always says READ ONLY file system can not create firl / directory.
    Please help me how to resolve this issue.
    Thanks in advance.
    Regards,
    Srinivas G

    What do you get for 'svcs -xv' output?
    Darren

  • Read only file system

    One of my Parabola installations has started to always mount the / partition read-only. I've booted into a different install on the same machine, and can mount the affected partition without problems. I've done a fsck, and run the SMART disk checks. No problems. I've touched /forcefsck so a file system check is done every time I boot, but still the partition is read-only when it finishes booting.
    This is the output of 'mount':
    proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
    sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
    dev on /dev type devtmpfs (rw,nosuid,relatime,size=1024388k,nr_inodes=256097,mode=755)
    run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
    /dev/sdb10 on / type ext4 (ro,relatime,data=ordered)
    tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
    /dev/sdb9 on /boot type ext4 (rw,relatime,data=ordered)
    /dev/sdb1 on /media/Stuff type fuseblk (rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
    binfmt on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
    This is the output of 'dmesg':
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.3-1-LIBRE (nobody@root) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Oct 23 00:29:01 UYST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-libre root=UUID=f0206707-f1ca-4bea-9eb3-c5d3713e4a4e ro resume=UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4 quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: System manufacturer System Product Name/P5KPL-CM, BIOS 0702 08/27/2010
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-protect
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7ff8ffff]
    [ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M
    [ 0.000000] [mem 0x7fe00000-0x7ff8ffff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0x7ff8ffff @ [mem 0x1fbfd000-0x1fffffff]
    [ 0.000000] RAMDISK: [mem 0x37a10000-0x37cfffff]
    [ 0.000000] ACPI: RSDP 00000000000fb6a0 00014 (v00 ACPIAM)
    [ 0.000000] ACPI: RSDT 000000007ff90000 0003C (v01 A_M_I_ OEMRSDT 08001027 MSFT 00000097)
    [ 0.000000] ACPI: FACP 000000007ff90200 00084 (v02 A_M_I_ OEMFACP 08001027 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 000000007ff905c0 07BFA (v01 A0968 A0968000 00000000 INTL 20060113)
    [ 0.000000] ACPI: FACS 000000007ff9e000 00040
    [ 0.000000] ACPI: APIC 000000007ff90390 0006C (v01 A_M_I_ OEMAPIC 08001027 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 000000007ff90400 0003C (v01 A_M_I_ OEMMCFG 08001027 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 000000007ff9e040 00080 (v01 A_M_I_ AMI_OEM 08001027 MSFT 00000097)
    [ 0.000000] ACPI: HPET 000000007ff981c0 00038 (v01 A_M_I_ OEMHPET 08001027 MSFT 00000097)
    [ 0.000000] ACPI: GSCI 000000007ff9e0c0 02024 (v01 A_M_I_ GMCHSCI 08001027 MSFT 00000097)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ff8ffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ff8ffff]
    [ 0.000000] NODE_DATA [mem 0x7ff8c000-0x7ff8ffff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x7ff8ffff]
    [ 0.000000] On node 0 totalpages: 524063
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8127 pages used for memmap
    [ 0.000000] DMA32 zone: 511953 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s84608 r8192 d21888 u524288
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515866
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-libre root=UUID=f0206707-f1ca-4bea-9eb3-c5d3713e4a4e ro resume=UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4 quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2048780k/2096704k available (4726k kernel code, 452k absent, 47472k reserved, 4144k data, 772k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1613.131 MHz processor
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3227.68 BogoMIPS (lpj=5377103)
    [ 0.003342] pid_max: default: 32768 minimum: 301
    [ 0.003391] Security Framework initialized
    [ 0.003397] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003643] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.004961] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.005580] Mount-cache hash table entries: 256
    [ 0.005927] Initializing cgroup subsys cpuacct
    [ 0.005933] Initializing cgroup subsys memory
    [ 0.005946] Initializing cgroup subsys devices
    [ 0.005949] Initializing cgroup subsys freezer
    [ 0.005951] Initializing cgroup subsys net_cls
    [ 0.005953] Initializing cgroup subsys blkio
    [ 0.005995] CPU: Physical Processor ID: 0
    [ 0.005998] CPU: Processor Core ID: 0
    [ 0.006000] mce: CPU supports 6 MCE banks
    [ 0.006010] CPU0: Thermal monitoring enabled (TM2)
    [ 0.006015] process: using mwait in idle threads
    [ 0.006021] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift is 0xffffffff
    [ 0.008169] ACPI: Core revision 20120711
    [ 0.013350] ftrace: allocating 18348 entries in 72 pages
    [ 0.026962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.059974] smpboot: CPU0: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz stepping 0d
    [ 0.059996] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.059996] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.059996] ... version: 2
    [ 0.059996] ... bit width: 40
    [ 0.059996] ... generic registers: 2
    [ 0.059996] ... value mask: 000000ffffffffff
    [ 0.059996] ... max period: 000000007fffffff
    [ 0.059996] ... fixed-purpose events: 3
    [ 0.059996] ... event mask: 0000000700000003
    [ 0.083501] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.096681] smpboot: Booting Node 0, Processors #1
    [ 0.109825] Brought up 2 CPUs
    [ 0.109825] smpboot: Total of 2 processors activated (6455.37 BogoMIPS)
    [ 0.110104] devtmpfs: initialized
    [ 0.112186] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (204800 bytes)
    [ 0.112186] NET: Registered protocol family 16
    [ 0.112186] ACPI: bus type pci registered
    [ 0.112186] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.112186] PCI: not using MMCONFIG
    [ 0.112186] PCI: Using configuration type 1 for base access
    [ 0.113367] bio: create slab <bio-0> at 0
    [ 0.113401] ACPI: Added _OSI(Module Device)
    [ 0.113401] ACPI: Added _OSI(Processor Device)
    [ 0.113401] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.113401] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.114233] ACPI: EC: Look up EC in DSDT
    [ 0.116040] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.122816] ACPI: SSDT 000000007ffa00f0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
    [ 0.122816] ACPI: Dynamic OEM Table Load:
    [ 0.122816] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
    [ 0.122816] ACPI: SSDT 000000007ffa02d0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
    [ 0.122816] ACPI: Dynamic OEM Table Load:
    [ 0.122816] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
    [ 0.122816] ACPI: Interpreter enabled
    [ 0.122816] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.122816] ACPI: Using IOAPIC for interrupt routing
    [ 0.122816] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.122816] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
    [ 0.136077] ACPI: No dock devices found.
    [ 0.136086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.136182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.136328] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.136382] PCI host bridge to bus 0000:00
    [ 0.136387] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
    [ 0.136390] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.136394] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.136397] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.136400] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.136403] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [ 0.136406] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
    [ 0.136420] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
    [ 0.136478] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
    [ 0.136533] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.136587] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    [ 0.136606] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
    [ 0.136697] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.136723] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    [ 0.136803] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.136831] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
    [ 0.136910] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.136941] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    [ 0.136986] pci 0000:00:1d.0: reg 20: [io 0xc480-0xc49f]
    [ 0.137022] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    [ 0.137067] pci 0000:00:1d.1: reg 20: [io 0xc800-0xc81f]
    [ 0.137108] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    [ 0.137153] pci 0000:00:1d.2: reg 20: [io 0xc880-0xc89f]
    [ 0.137190] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    [ 0.137235] pci 0000:00:1d.3: reg 20: [io 0xcc00-0xcc1f]
    [ 0.137282] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    [ 0.137304] pci 0000:00:1d.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
    [ 0.137395] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.137419] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.137491] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
    [ 0.137581] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
    [ 0.137630] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
    [ 0.137645] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.137656] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.137667] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
    [ 0.137678] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
    [ 0.137689] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
    [ 0.137730] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
    [ 0.137747] pci 0000:00:1f.2: reg 10: [io 0xc400-0xc407]
    [ 0.137757] pci 0000:00:1f.2: reg 14: [io 0xc080-0xc083]
    [ 0.137767] pci 0000:00:1f.2: reg 18: [io 0xc000-0xc007]
    [ 0.137777] pci 0000:00:1f.2: reg 1c: [io 0xbc00-0xbc03]
    [ 0.137786] pci 0000:00:1f.2: reg 20: [io 0xb880-0xb88f]
    [ 0.137827] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.137845] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    [ 0.137901] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
    [ 0.137974] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
    [ 0.137991] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
    [ 0.138008] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.138021] pci 0000:01:00.0: reg 18: [mem 0xfeac0000-0xfeadffff 64bit]
    [ 0.138031] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
    [ 0.138047] pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
    [ 0.138085] pci 0000:01:00.0: supports D1 D2
    [ 0.138109] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
    [ 0.138125] pci 0000:01:00.1: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
    [ 0.138195] pci 0000:01:00.1: supports D1 D2
    [ 0.138231] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.138236] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.138240] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.138246] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.138291] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
    [ 0.138295] pci 0000:00:1c.0: PCI bridge to [bus 03]
    [ 0.138347] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
    [ 0.138372] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
    [ 0.138398] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
    [ 0.138412] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f]
    [ 0.138519] pci 0000:02:00.0: PME# supported from D3hot D3cold
    [ 0.138544] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.138555] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.138560] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
    [ 0.138565] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.138595] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
    [ 0.138642] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    [ 0.138654] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.138657] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.138660] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.138663] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.138666] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    [ 0.138689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.138794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.138867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [ 0.138903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
    [ 0.138963] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.138967] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.145009] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15)
    [ 0.145073] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
    [ 0.145128] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 11 12 14 15)
    [ 0.145187] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
    [ 0.145246] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.145306] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.145365] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.145425] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15)
    [ 0.146698] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.146703] vgaarb: loaded
    [ 0.146705] vgaarb: bridge control possible 0000:01:00.0
    [ 0.146775] PCI: Using ACPI for IRQ routing
    [ 0.147301] PCI: pci_cache_line_size set to 64 bytes
    [ 0.147387] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [ 0.147389] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff]
    [ 0.147545] NetLabel: Initializing
    [ 0.147548] NetLabel: domain hash size = 128
    [ 0.147550] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.147571] NetLabel: unlabeled traffic allowed by default
    [ 0.147588] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.147593] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.147599] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.166686] Switching to clocksource hpet
    [ 0.177018] pnp: PnP ACPI init
    [ 0.177044] ACPI: bus type pnp registered
    [ 0.177174] pnp 00:00: [bus 00-ff]
    [ 0.177179] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.177182] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.177186] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.177189] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.177192] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.177195] pnp 00:00: [mem 0x80000000-0xffffffff window]
    [ 0.177279] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.177295] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [ 0.177363] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.177369] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.177419] pnp 00:02: [dma 4]
    [ 0.177423] pnp 00:02: [io 0x0000-0x000f]
    [ 0.177426] pnp 00:02: [io 0x0081-0x0083]
    [ 0.177429] pnp 00:02: [io 0x0087]
    [ 0.177431] pnp 00:02: [io 0x0089-0x008b]
    [ 0.177434] pnp 00:02: [io 0x008f]
    [ 0.177437] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.177478] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.177494] pnp 00:03: [io 0x0070-0x0071]
    [ 0.177508] pnp 00:03: [irq 8]
    [ 0.177544] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.177557] pnp 00:04: [io 0x0061]
    [ 0.177595] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.177609] pnp 00:05: [io 0x00f0-0x00ff]
    [ 0.177617] pnp 00:05: [irq 13]
    [ 0.177654] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.178000] pnp 00:06: [irq 6]
    [ 0.178004] pnp 00:06: [dma 2]
    [ 0.178007] pnp 00:06: [io 0x03f0-0x03f5]
    [ 0.178010] pnp 00:06: [io 0x03f7]
    [ 0.178096] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.178501] pnp 00:07: [irq 7]
    [ 0.178504] pnp 00:07: [dma 3]
    [ 0.178508] pnp 00:07: [io 0x0378-0x037f]
    [ 0.178511] pnp 00:07: [io 0x0778-0x077f]
    [ 0.178686] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.178731] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.178735] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.178738] pnp 00:08: [io 0x0290-0x0297]
    [ 0.178815] system 00:08: [io 0x0290-0x0297] has been reserved
    [ 0.178821] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.178918] pnp 00:09: [io 0x0010-0x001f]
    [ 0.178922] pnp 00:09: [io 0x0022-0x003f]
    [ 0.178925] pnp 00:09: [io 0x0044-0x005f]
    [ 0.178928] pnp 00:09: [io 0x0062-0x0063]
    [ 0.178934] pnp 00:09: [io 0x0065-0x006f]
    [ 0.178937] pnp 00:09: [io 0x0072-0x007f]
    [ 0.178939] pnp 00:09: [io 0x0080]
    [ 0.178942] pnp 00:09: [io 0x0084-0x0086]
    [ 0.178945] pnp 00:09: [io 0x0088]
    [ 0.178948] pnp 00:09: [io 0x008c-0x008e]
    [ 0.178951] pnp 00:09: [io 0x0090-0x009f]
    [ 0.178953] pnp 00:09: [io 0x00a2-0x00bf]
    [ 0.178956] pnp 00:09: [io 0x00e0-0x00ef]
    [ 0.178959] pnp 00:09: [io 0x04d0-0x04d1]
    [ 0.178962] pnp 00:09: [io 0x0800-0x087f]
    [ 0.178965] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.178968] pnp 00:09: [io 0x0480-0x04bf]
    [ 0.178971] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [ 0.178974] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
    [ 0.179068] system 00:09: [io 0x04d0-0x04d1] has been reserved
    [ 0.179072] system 00:09: [io 0x0800-0x087f] has been reserved
    [ 0.179076] system 00:09: [io 0x0480-0x04bf] has been reserved
    [ 0.179080] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.179083] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.179089] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.179173] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
    [ 0.179219] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.179280] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
    [ 0.179284] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [ 0.179332] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.179387] pnp 00:0c: [mem 0xffc00000-0xffefffff]
    [ 0.179460] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
    [ 0.179466] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.179524] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
    [ 0.179528] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
    [ 0.179608] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.179612] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.179617] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.179660] pnp 00:0e: [io 0x0060]
    [ 0.179663] pnp 00:0e: [io 0x0064]
    [ 0.179673] pnp 00:0e: [irq 1]
    [ 0.179734] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.179796] pnp 00:0f: [irq 12]
    [ 0.179852] pnp 00:0f: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [ 0.180166] pnp 00:10: [irq 4]
    [ 0.180170] pnp 00:10: [dma 0 disabled]
    [ 0.180173] pnp 00:10: [io 0x03f8-0x03ff]
    [ 0.180292] pnp 00:10: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.180342] pnp 00:11: [mem 0xf0000000-0xf3ffffff]
    [ 0.180427] system 00:11: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.180433] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.180636] pnp 00:12: [mem 0x00000000-0x0009ffff]
    [ 0.180640] pnp 00:12: [mem 0x000c0000-0x000cffff]
    [ 0.180643] pnp 00:12: [mem 0x000e0000-0x000fffff]
    [ 0.180646] pnp 00:12: [mem 0x00100000-0x7fffffff]
    [ 0.180649] pnp 00:12: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.180743] system 00:12: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.180747] system 00:12: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.180751] system 00:12: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.180754] system 00:12: [mem 0x00100000-0x7fffffff] could not be reserved
    [ 0.180760] system 00:12: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.180916] pnp: PnP ACPI: found 19 devices
    [ 0.180919] ACPI: ACPI bus type pnp unregistered
    [ 0.188605] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.188613] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 0.188617] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
    [ 0.188628] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.188646] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.188650] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.188653] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.188657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.188664] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
    [ 0.188668] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
    [ 0.188673] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.188678] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.188683] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.188687] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.188693] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.188697] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.188703] pci 0000:00:1c.0: PCI bridge to [bus 03]
    [ 0.188707] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.188713] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
    [ 0.188718] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
    [ 0.188725] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.188729] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
    [ 0.188735] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.188740] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.188747] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 0.188784] pci 0000:00:1c.0: enabling device (0104 -> 0107)
    [ 0.188805] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.188810] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.188814] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.188817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.188820] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.188824] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.188827] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.188830] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.188833] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.188836] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
    [ 0.188840] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
    [ 0.188843] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
    [ 0.188846] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.188849] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.188852] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.188856] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.188859] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.188862] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.188865] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.188868] pci_bus 0000:04: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.188916] NET: Registered protocol family 2
    [ 0.189551] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    [ 0.192082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.192686] TCP: Hash tables configured (established 262144 bind 65536)
    [ 0.192758] TCP: reno registered
    [ 0.192773] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.192798] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.192949] NET: Registered protocol family 1
    [ 0.193147] pci 0000:01:00.0: Boot video device
    [ 0.193158] PCI: CLS 32 bytes, default 64
    [ 0.193230] Unpacking initramfs...
    [ 0.285578] Freeing initrd memory: 3008k freed
    [ 0.287514] audit: initializing netlink socket (disabled)
    [ 0.287533] type=2000 audit(1351450895.286:1): initialized
    [ 0.303689] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.306261] VFS: Disk quotas dquot_6.5.2
    [ 0.306342] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.306570] msgmni has been set to 4007
    [ 0.306904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.306951] io scheduler noop registered
    [ 0.306955] io scheduler deadline registered
    [ 0.307043] io scheduler cfq registered (default)
    [ 0.307215] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.307324] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.307443] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.307659] intel_idle: does not run on family 6 model 15
    [ 0.307698] GHES: HEST is not enabled!
    [ 0.307788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.328340] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.349279] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.349579] Linux agpgart interface v0.103
    [ 0.349708] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.352389] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.352444] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.352607] mousedev: PS/2 mouse device common for all mice
    [ 0.352700] rtc_cmos 00:03: RTC can wake from S4
    [ 0.352865] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.352896] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.352913] cpuidle: using governor ladder
    [ 0.352915] cpuidle: using governor menu
    [ 0.353088] drop_monitor: Initializing network drop monitor service
    [ 0.353195] TCP: cubic registered
    [ 0.353379] NET: Registered protocol family 10
    [ 0.353609] NET: Registered protocol family 17
    [ 0.353626] Key type dns_resolver registered
    [ 0.353965] PM: Checking hibernation image partition UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4
    [ 0.377050] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.398600] PM: Hibernation image not present or could not be loaded.
    [ 0.398629] registered taskstats version 1
    [ 0.399166] rtc_cmos 00:03: setting system clock to 2012-10-28 19:01:35 UTC (1351450895)
    [ 0.400807] Freeing unused kernel memory: 772k freed
    [ 0.401093] Write protecting the kernel read-only data: 8192k
    [ 0.407007] Freeing unused kernel memory: 1408k freed
    [ 0.410355] Freeing unused kernel memory: 652k freed
    [ 0.424642] systemd-udevd[42]: starting version 194
    [ 0.484567] ACPI: bus type usb registered
    [ 0.484613] usbcore: registered new interface driver usbfs
    [ 0.484629] usbcore: registered new interface driver hub
    [ 0.484994] usbcore: registered new device driver usb
    [ 0.485924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.485981] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.485987] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.485997] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 0.489913] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.489922] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.489951] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
    [ 0.493550] SCSI subsystem initialized
    [ 0.496118] ACPI: bus type scsi registered
    [ 0.496720] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.497003] hub 1-0:1.0: USB hub found
    [ 0.497013] hub 1-0:1.0: 8 ports detected
    [ 0.497923] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.497967] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.497972] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.497982] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.498020] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
    [ 0.498143] libata version 3.00 loaded.
    [ 0.499305] hub 2-0:1.0: USB hub found
    [ 0.499317] hub 2-0:1.0: 2 ports detected
    [ 0.499540] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.499547] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.499557] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 0.499610] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
    [ 0.500253] hub 3-0:1.0: USB hub found
    [ 0.500264] hub 3-0:1.0: 2 ports detected
    [ 0.500442] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.500448] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.500463] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 0.500512] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
    [ 0.500811] hub 4-0:1.0: USB hub found
    [ 0.500822] hub 4-0:1.0: 2 ports detected
    [ 0.501016] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 0.501022] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 0.501039] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 0.501090] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
    [ 0.502169] hub 5-0:1.0: USB hub found
    [ 0.502179] hub 5-0:1.0: 2 ports detected
    [ 0.502422] ata_piix 0000:00:1f.1: version 2.13
    [ 0.502499] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 0.503963] scsi0 : ata_piix
    [ 0.504744] scsi1 : ata_piix
    [ 0.505372] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [ 0.505378] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [ 0.505429] ata_piix 0000:00:1f.2: MAP [
    [ 0.505431] P0 P2 P1 P3 ]
    [ 0.505484] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 0.507566] scsi2 : ata_piix
    [ 0.508975] scsi3 : ata_piix
    [ 0.509624] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
    [ 0.509630] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
    [ 0.684177] ata3.00: ATA-8: WDC WD6400AAKS-00A7B2, 01.03B01, max UDMA/133
    [ 0.684184] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 0.691230] ata3.00: configured for UDMA/133
    [ 0.691417] scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
    [ 0.699349] sd 2:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
    [ 0.699463] sd 2:0:0:0: [sda] Write Protect is off
    [ 0.699468] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.699516] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.774080] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
    [ 0.775132] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 1.096765] usb 2-2: new low-speed USB device number 2 using uhci_hcd
    [ 1.275214] usbcore: registered new interface driver usbhid
    [ 1.275219] usbhid: USB HID core driver
    [ 1.276959] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
    [ 1.277358] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
    [ 1.290145] tsc: Refined TSC clocksource calibration: 1613.217 MHz
    [ 1.290153] Switching to clocksource tsc
    [ 1.426263] PM: Starting manual resume from disk
    [ 1.426269] PM: Hibernation image partition 8:8 present
    [ 1.426271] PM: Looking for hibernation image.
    [ 1.426530] PM: Image not found (code -22)
    [ 1.426535] PM: Hibernation image not present or could not be loaded.
    [ 1.648559] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.388263] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.459036] fuse init (API version 7.20)
    [ 13.150864] Adding 1951860k swap on /dev/sda8. Priority:-1 extents:1 across:1951860k
    [ 0.691798] ACPI: Invalid Power Resource to register!
    [ 14.060519] synergys[417]: segfault at 0 ip 0000000000449fa9 sp 00007fff68a19a90 error 4
    [ 14.060531] in synergys[400000+cb000]
    (I disconnected the second hard drive in the machine to verify that it wasn't causing problems. Hence the sda / sdb discrepancy)
    I've been able to mount the partitions and chroot into them, but I don't know what to do from here. Oddly, I've discovered that 'ls' doesn't output anything, although bash completion seems to work ok.
    Any ideas on what I should do to get my system running again?
    Thanks in advance,
    Bernie

    Have you read the forum rules? Asking for support for Parabola isn't going to get you very far.
    https://wiki.archlinux.org/index.php/Fo … pport_ONLY

  • External Harddisk read only after the system hand during I copy some folders to my external drive.

    I'm using macbook pro mid 2010.
    I could not write my external HDD 1TB (WD) after I copying the folder from local folder to external folder via my parallel desktop.
    During the copying, the system hang halfway and no choice i terminate the copy. SInce that, i could not write my HDD either from OSX or via parallel desktop.
    When i check the infer, the HDD shown read only. I truing to use the disk utility to verify the disk but I could not click on the button.
    Appreciate someone could advice me beside backup and reformat the HDD.
    Thank you!

    I've got the same problem here with a Seagate external HD. I've been able to install Leopard on another Western Digital HD and boot from it to copy some files to a newly purchased external, but in Leopard I can't copy my 180GB music library because of several errors. It either says that the file names cannot be copied because they are too similar to another file name (accidental dupes in the library) or that the names are too long to be copied and neither make any sense. I'm trying to figure out how to move all of my music over without having to go through it file by file and without losing anything.
    I was able to easily copy all other information from the hard drive; the music is the last remaining item I need before I reformat the external and use it in Snow Leopard as a TM backup drive.

  • Crashes and read-only file systems

    Notice: I apolgize for the long post, I've tried to be as thorough as possible.  I have searched everywhere for possible solutions, but things I've found end up being temporary workarounds or don't apply to my situation.  Any help, even as simple as, "have you checked out XYZ log, it's hidden here", would be greatly appreciated.  Thanks
    I'm not sure what exactly caused the issues below, but they did start to happen within a day of running pacman -Syu.  I hadn't run that since I first installed Arch on December 2nd of this year.
    Setup:
    Thinkpad 2436CTO
    UEFI/GPT
    SSD drive
    Partitions: UEFISYS, Boot, LVM
    The LVM is encrypted and is broken up as: /root, /var, /usr, /tmp, /home
    All LVM file systems are EXT4 (used to have /var and /tmp as ReiserFS)
    The first sign that something was wrong was gnome freezing.  Gnome would then crash and I'd get booted back to the shell with all filesystems mounted as read-only.  I started having the same issues as this OP:
    https://bbs.archlinux.org/viewtopic.php?id=150704
    At the time, I had /var and /tmp as ReiserFS, and would also get reiserfs_read_locked_inode errors.
    When shutting down (even during non-crashed sessions) I would notice this during shutdown:
    Failed unmounting /var
    Failed unmounting /usr
    Followed by a ton of these:
    device-mapper: remove ioctl on <my LVM group> failed: Device or resource busy
    Nother of these errors had ever appeared before.
    After hours of looking for solutions (and not finding any that worked) I was convinced (without any proof) that my Reiser file systems were corrupt and so I reformatted my entire SSD and started anew - not the Arch way, I know   I set all logical volumes as EXT4.
    After started anew, I noticed
    device-mapper: remove ioctl on LVM_SysGroup failed: Device or resource busy
    was still showing up, even with just a stock Arch setup (maybe even when powering off via Arch install ISO, don't remember).  After a lot of searching, I found that most people judged it a harmless error, so I ignored it and continued setting up Arch.
    I set up Gnome and a basic LAMP server, and everything seemed to work for a couple of hours.  Soon after, I got the same old issues back.  The System-journald issue came back and per the workaround on https://bbs.archlinux.org/viewtopic.php?id=150704 and a couple other places, I rotated the journals and stopped journald from saving to storage.  That seemed to stop THOSE errors from at least overwhelming the shell, but I would still get screen freezes, crashes, and read-only file systems.
    I had to force the laptop to power off, since poweroff/reboot/halt commands weren't working (would get errors regarding the filesystems mounted as read-only).
    I utilized all disk checking functions possible.  From running the tests (SMART test included) that came as part of my laptop's BIOS to full blown fsck.  All tests showed the drive was working fine, and Fsck would show everything was either clean, or
    Clearing orphaned inode ## (uid=89, gid=89, mode=0100600, size=###
    Free blocks count wrong (###, counted=###)
    Which I would opt to fix.  Nothing serious, though.
    I could safely boot back into Arch and use the system fine until the system decides to freeze/crash and do the above all over again.
    The sure way of recreating this for me is to run a cron job on a local site I'm developing. After a brief screen freeze (mouse still moveable but everything is otherwise unreponsive) I'll systemctl status mysqld.service and notice that mysqld went down.
    It seems that it's at this point my file systems are mounted as read only, as trying to do virtually anything results in:
    unable to open /var/db/sudo/...: Read-only file system
    After some time, X/Gnome crashes and I get sent back to shell with
    ERROR: file_stream_metrics.cc(37)
    RecordFileError() err = 30 source = 1 record = 0
    Server terminated successfully (0)
    Closing log file.or_delegate.h(30)] sqlite erro1, errno 0: SQL logic error or missing database[1157:1179
    rm: cannot remove '/tmp/serverauth.teuroEBhtl': Read-only file system
    Before all this happened, I was using Arch just fine for a few weeks.  I wiped the drives and started anew, and this still happens with just the minimal number of packages installed.
    I've searched for solutions to each individual problem, but come across a hack that doesn't solve anything (like turning off storing logs for journal), or the solution doesn't apply to my case.
    At this point, I'm so overwhelmed I'm not even sure where exactly to pick up figuring this issue out.
    Thanks in advance for any help

    Did this occur when you booted from the live/install media?
    What is your current set up? That is, partitions, filesystems etc. I take it you have not yet reinstalled X but are in the default CLI following installation?
    If turning off log storage didn't help, reenable it so that you may at least stand a chance of finding something useful.
    What services, if any, are you running? What non-default daemons etc.?
    Does it happen if you keep the machine off line?
    Have you done pacman -Syu since installation and dealt with any *.pacnew files?
    Last edited by cfr (2012-12-26 22:17:57)

  • System goes read only, after reboot all is fine for a day or two

    OK, so here's the problem, I got a new PC, all fanless, SSD hard and all.
    Works well for a day or so, then goes read only. For example - I come back from work, type something in the terminal and I get Input/Output Error. I cannot reboot, it says Input/Output Error as well.
    So I hard-reset it, it boots up, everything is fine again for a day or two.
    The HDD is Corsair CSSD-F40GB2, the MB is Gigabyte H55N-USB3, proc i3 540,
    The / and /home are both ext4 mounted with defaults,noatime,discard.
    I tried with/without discard.
    I also tried changing the SATA/power cables - same results.
    I also tried enabling/disabling features in BIOS like DMA/SMART/AHCI/compatibility stuff - same results.
    Here's a dmesg I managed to get (errors are near the end).
    http://pastebin.com/vJfdW90z
    And here's a smartctl -a /dev/sda:
    http://pastebin.com/eQxASEBM
    Any suggestions are welcome. Also is there some diagnostic app for Corsair SSD that I can run and check the drive?
    Cheers.

    Well I don't recall how freshly booted, it was the only time that the system was read-only - giving input/output error to everything but dmesg was working so I saved it all to pastebin.
    The system is a PC so I never tried anything else different from poweroff/reboot (works fine).

  • Since I updated my MacBook Pro system software yesterday (10.8.5) my LACIE backup won't work - says it's "read only"

    Since I updated my MacBook Pro system software yesterday (10.8.5) my LACIE backup won't work - says it's "read only"

    What type of backup TM, clone, other?
    Get Info (command-i) on your backup volume, under Sharing & Permissions be sure Ignore Ownereship is not checked marked. Here's what I get for a clone...
    And like this for a TM backup volume...

  • JFS root file system will only mount read-only

    Hi, everybody!
    I have been running this filesystem for months with no issues. The only thing I can think of that I changed recently was that I ran pacman -Syu.
    When I boot there is no indication that there are errors with the file system. It simply mounts as read-only.
    I have tried running
    mount -n -o remount,rw /
    , and it says "mount: / not mounted already, or bad option".
    When I run just
    mount -n -o rw /
    it appears to work, in that there is no error message, but the file system is still read-only.
    I have been able to mount it read-write successfully with the install disc, but only after I ran a fsck on it, also from the install disc. However, each time I have run fsck, it has reported no errors. I also tried forcing the check, with the same result.
    Even after mounting it successfully with the install disc, it still will not mount read-write from my hard-disk install.
    My DE (gnome) locked up a few days ago and I had to do a hard reboot, but it still functioned fine after that, so it doesn't seem related.
    I would like to not have to reinstall, but I can if I need to. I would also like to find out how this happened, so that it does not happen again.
    Any suggestions would be greatly appreciated.
    Thanks for your help,
    Jefferson

    I got it working. I was running the fsck on the wrong partition. I am still curious as to why it happened, though.
    @Marcel-: I don't think there was anything strange in my logs, but I'm not sure. I will look them over some more. Is there a particular one I should be looking in?
    @seiichiro0185: Yes, the passno-flag is set to 1 for my rootfs.
    Thank you both very much for helping me!

  • Set sharing on system to read only now computer wlll not boot up

    set sharing on system to read only now computer wlll not boot up

    Hello skiboat2, 
    Because the permissions have been changed, you will need to put them back to what they were before. One of the ways to do that is to reinstall your OS X to make sure that everything permission wise gets put back to what it needs to be to work properly. Based of to the operating system that you say you have, I have provided the steps for reinstalling Snow Leopard. When doing this, it does not overwrite your personal data; it only touches the operating system. 
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Regards,
    -Norm G.  

Maybe you are looking for

  • Connecting hp psc 950 to iMac Intel with USB cable

    I have had my iMac for about 14 months and have been using an old Dell PC for most of my printing needs. I have reached the point that I want to convert everything to the iMac. I have Fusion and am running Windows 7 there so I can use Quicken 2010 (t

  • New View Object not found

    Using the scott schema, in my test workspace I created a BC4J project that had 4 tables/view objects using the wizards and taking all the defaults. I created a UIX-JSP project using those view objects. Next I created a new table in the database (Logi

  • Idvd slideshow

    I guess I did not post enough info on my first post so I am trying again. Can you tell I am a newbee at this site. I have made a few slideshows on the I life idvd 05. The last 2 have had problems playing on the dvd player,but not on my computer. I ma

  • FM to create inspection lot same as in QA01

    Hi Experts, I need a function module to create inspection lot as in QA01.  Can you please help? Thanks, Vitz

  • Problem playing QuickTime back on website

    I've just started experiencing this problem today. I converted a 4x3 movie to a 480x360 H.264 file using the QuickTime player. I then added the video in a new iWeb project and published it to a folder on my desktop. Followed by that I uploaded it to