RAID works, RAID Admin stopped seeing it...

...but yet I can monitor my remote G4/RAID just fine.
I'm running 10.4.5 on a G5 Xserve/RAID, 10.3.9 on the G4.
I tried shutting the whole mess down, disconnecting and restarting, tried plugging the ethernet cable directly to another G5, etc, but the RAID will not show up at the IP address it was given. Was there something in Tiger that messed up my monitoring capabilities or changed my monitoring IP address? Is it possible someone tinkered with something they shouldn't have, and if so, how do I get it back without halting production in the whole shop?
Or is this just another one of those problems I seem to be the only one to have??
Xserve G5/RAID Mac OS X (10.4.5)

No, it happens. Just happened to me last month. RAID is fine - admin would show me three yellow lights and one red light and then would "gathering information" forever and ever with the spinning wheel.
First off - do you have matching firmware versions in your RAIDs?
I was told in no uncertain terms by Apple that running different versions of RAID admin than firmware version would result in the disconnect. If you have different versions of firmware you might want different versions of RAID admin.
Second - to fix I had to turn the RAID off AND unplug cables for 30 seconds and then restart. Notice Apple doesn't call it "off" they call it "power stand-by mode". To turn it off you need to unplug it or the machine stays in stand-by mode looking for the network signals.
Third - if you're just not finding the RAID could it just be on a different network IP range? There are a couple ways to find it if it's missing where you expect it to be.
1) Start RAID Admin and click "Add System" - if it is in your IP range it'll show up.
2) Run Network Utility. Ping 255.255.255.255 and you will get a response form 127.0.0.1 (that's you) and if another IP address shows up that's another device - probably the RAID if you're connected directly or on a local hub.
Remember - there are 2 ethernet ports with 2 separate NICs and that 169.254.a.b is the default range of the RAID IPs. If it's not where you expect it to be I'd start there. Make sure you are connected to the one you think you set - or use a hub to connect to both simultaneously for double the scanning pleasure. Also you should check that your subnet mask is set to something generous like at least 255.255.0.0 to make sure you're casting a wide net when you search.
HTH,
=Tod
G5/2.0x2, Dual XServes x2, XRAID, beige G3 501Mhz

Similar Messages

Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?

Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Can the xserve raid works with iOS 10.9

can the xserve raid works with iOS 10.9
The Raid System is from the year 2006!
and have 14 x 500 Gb hard drives
and the Server is from September 2009
Prozessor 2,26 GHz Quad-Core Intel Xeon
and ist working with iOS 10.9.3

Yes.

Xserve and xserve raid works with iOS 10.9

xserve and xserve raid works with iOS 10.9

For the Xserve hardware:
OS X Mavericks: System Requirements
The Xserve RAID is known as a DAS (directly attached storage) device and provided the HBA card you're planning to use is fully supported in whatever server platform you've chosen (Apple, Microsoft etc) it will be work regardless of OS version.

Apple Xserver Raid, 1 raid mounts and the other raid does not mount

Apple Xserver Raid, 1 raid mounts and the other raid does not mount but all the lights on the drives are green

Kind of lacking in detail there...
Did the other volume mount in the past? and it stopped working? When? What changed?
What does Raid Admin.app have to say about it?
Does it see the drives? a RAID set on those drives? A link on the fiber channel connection?

Mac mini server has suddenly stopped seeing one or the other bluetooth devices! Batteries have been changed and they will connect to an older Mac mini. Server will now only see one or the other but not both.

My Mac mini server has suddenly stopped seeing one or the other bluetooth devices, either the wireless keyboard or the mouse( both apple products) have tried new batteries, at first it was the mouse that stopped responding, but upon rebooting the computer now the keyboard will not respond and the mouse works. Both work fine on an older Mac mini that I hooked back up to check.

There is absolutely no reason why they should not bothe be able to connect to your WiFi network. The easiest place to start would be to reboot your router. Unplug it for about 30 seconds and then plug it back in again. I would also restart both the iPad and the iPhone.

Adobe Edge Animate CC 2014.1 is totally not working. It stop working after 5min. Sometimes is stops the operating system.

Adobe Edge Animate CC 2014.1 is totally not working. It stop working after 5min. Sometimes is stops the operating system. On on mac OS X Yosemite. macbook pro i7 2013.
I reinstalled it not helping.
Message was edited by: Daniel Boguszewski

UPDATE
i have ulpaded 2 animation ( one normal and one Responsive ) in 2 different server here the link
www.eclipseadv.com/maliRP/maliRP.html
Untitled
via SAFARI or CHROME on MAC all OK
but via IPAD ( SAFARI, CHROME and MERCURY) i didn't see the video, just the animation of the BUTTON and the link if i click on it (not in Mercury), like in the content viewer.

Disp+work.exe is stopped, Database is Down

Dear All,
Our Production Server is in the cluster mode.
Disp+work.exe is stopped
Database is down
Database : MS SQL 2005 Server
OS: Windows 2003 32 bit
Kindly help us to start the database.
In the Services we have 5 SQL Server Services:
1. SQL Server (MSSQLSERVER)-- not started --manual (logon as Server\clustadmin)
2. SQL Server Active Directory Helper --- hot started u2013manual (logon as Server\clustadmin)
3. SQL Server Agent (MSSQLSERVER) -not started u2013 manual-(logon as Server\clustadmin)
4. SQLSERVER Browser ---Started ---Automaticu2014(Logon as\clustadmin)
5. SQL Server writer u2013Started ---Automaticu2014(logon as Local System)
Syslog: Database: Database error -1     at CON
SQLERRORLOG.1
2010-07-05 10:26:02.67 Server      Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
     Feb 9 2007 22:47:07
     Copyright (c) 1988-2005 Microsoft Corporation
     Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
2010-07-05 10:26:02.67 Server      (c) 2005 Microsoft Corporation.
2010-07-05 10:26:02.67 Server      All rights reserved.
2010-07-05 10:26:02.67 Server      Server process ID is 7344.
2010-07-05 10:26:02.67 Server      Authentication mode is MIXED.
2010-07-05 10:26:02.67 Server      Logging SQL Server messages in file 'F:\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2010-07-05 10:26:02.67 Server      This instance of SQL Server last reported using a process ID of 6800 at 7/5/2010 10:25:07 AM (local) 7/5/2010 4:55:07 AM (UTC). This is an informational message only; no user action is required.
2010-07-05 10:26:02.67 Server      Registry startup parameters:
2010-07-05 10:26:02.67 Server            -d F:\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2010-07-05 10:26:02.67 Server            -e F:\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2010-07-05 10:26:02.67 Server            -l F:\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2010-07-05 10:26:02.67 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2010-07-05 10:26:02.67 Server      Detected 16 CPUs. This is an informational message; no user action is required.
2010-07-05 10:26:02.98 Server      Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2010-07-05 10:26:03.32 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2010-07-05 10:26:03.32 Server      Lock partitioning is enabled. This is an informational message only. No user action is required.
2010-07-05 10:26:03.39 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2010-07-05 10:26:06.28 Server      The Microsoft Distributed Transaction Coordinator (MS DTC) service could not be contacted. If you would like distributed transaction functionality, please start this service.
2010-07-05 10:26:06.28 Server      Database mirroring has been enabled on this instance of SQL Server.
2010-07-05 10:26:06.29 spid5s      Starting up database 'master'.
2010-07-05 10:26:06.33 spid5s      1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2010-07-05 10:26:06.33 spid5s      0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2010-07-05 10:26:06.33 spid5s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2010-07-05 10:26:06.34 spid5s      SQL Trace ID 1 was started by login "sa".
2010-07-05 10:26:06.36 spid5s      Starting up database 'mssqlsystemresource'.
2010-07-05 10:26:06.36 spid5s      The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2010-07-05 10:26:06.58 spid5s      Server name is 'DBGRP'. This is an informational message only. No user action is required.
2010-07-05 10:26:06.58 spid9s      Starting up database 'model'.
2010-07-05 10:26:06.58 spid5s      The NETBIOS name of the local node that is running the server is 'DHBPRD2'. This is an informational message only. No user action is required.
2010-07-05 10:26:06.70 spid9s      Clearing tempdb database.
2010-07-05 10:26:06.90 spid9s      Starting up database 'tempdb'.
2010-07-05 10:26:06.97 spid9s      Analysis of database 'tempdb' (2) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2010-07-05 10:26:07.04 spid12s     The Service Broker protocol transport is disabled or not configured.
2010-07-05 10:26:07.04 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2010-07-05 10:26:07.11 spid12s     Service Broker manager has started.
2010-07-05 10:26:07.42 Server      A self-generated certificate was successfully loaded for encryption.
2010-07-05 10:26:07.43 Server      Error: 26054, Severity: 16, State: 1.
2010-07-05 10:26:07.43 Server      Could not find any IP address that this SQL Server instance depends upon. Make sure that the cluster service is running, that the dependency relationship between SQL Server and Network Name resources is correct, and that the IP addresses on which this SQL Server instance depends are available. Error code: 0x103.
2010-07-05 10:26:07.45 Server      Error: 17182, Severity: 16, State: 1.
2010-07-05 10:26:07.45 Server      TDSSNIClient initialization failed with error 0x103, status code 0xa.
2010-07-05 10:26:07.45 Server      Error: 17182, Severity: 16, State: 1.
2010-07-05 10:26:07.45 Server      TDSSNIClient initialization failed with error 0x103, status code 0x1.
2010-07-05 10:26:07.45 Server      Error: 17826, Severity: 18, State: 3.
2010-07-05 10:26:07.45 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2010-07-05 10:26:07.45 Server      Error: 17120, Severity: 16, State: 1.
2010-07-05 10:26:07.45 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Best Regards,
Sunil

Hi Sunil,
this is the problem:
2010-07-05 10:26:07.43 Server      Error: 26054, Severity: 16, State: 1.
2010-07-05 10:26:07.43 Server      Could not find any IP address that this SQL Server instance depends upon. Make sure that the cluster service is running, that the dependency relationship between SQL Server and Network Name resources is correct, and that the IP addresses on which this SQL Server instance depends are available. Error code: 0x103.
In the cluster admin please check if the IPadress and the network name for the SQL Server is online, before you start the SQL Server.
Regards
Clas

TS4268 I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

Define "mentioned steps."
See this:
iOS: Troubleshooting FaceTime and iMessage activation

Plzz i think i opened a hacked internet page and now notting works well autocad stopped working firefox as well and i donno wat to do

plzz i think i opened a hacked internet page and now notting works well autocad stopped working and firefox as well ........could mac os be virused??

There are no Mac viruses, only malware that requires your assistance to get installed. For more on this, see:
http://www.reedcorner.net/guides/macvirus
As to your problem, we can't say what might have happened without more information. Try restarting your computer, and if that doesn't help, we need to know what you saw and what's happening now in greater detail.
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

How do I stop seeing a shared photo?

How do I stop seeing a shared photo?

Those are photos you have shared using shared PhotoStreams or Other peoples SharedPhotoStreams that you have subscribed to
You can delete a photo from one by right click the photos and select delete from shared album (this will only work on subscribed albums if the originator has allowed it)
You can delete the entire album by right click on the album name and selecting delete shared abum
You can unsubscribe from one you have subscribed to by right clicking on the album and selecting unsubscribe
LN

My apple tv wont work nomore.i can see the pictures in the screen my remote battery ok.why still wont navigate if i push any buttons but I can see my apple tv blinking?do I have to buy a new apple tv remote?

my apple tv wont work!i can see the pictures in my screen and everytime I push the buttons wont navigate o go to youtube,netflix etc.remote battery is okey and I can see the apple tv is blinking everytime I push the remote.I already did hold menu and rewind buttons together.after 6seconds the apple tv keeps blinking and stop..anyone help can help me?or do I have to buy a new apple tv remote?

Welcome to the Apple Community.
Whilst the remote app can be used once the Apple TV has been set up, you still need the original remote to set it up first.

Why wont my apple tv see my library? I can connect to internet etc... But it has stopped seeing my media files on my pc. i have tried all the suggestion but wit no luck:-(

why wont my apple tv see my library? I can connect to internet etc... But it has stopped seeing my media files on my pc. i have tried all the suggestion but with no luck:-(

Hi
i have the apple tv2. I was working ok,with no problems but now will not see my library. I have all my films music etc.. on a extl hard drive and my itunes is set to that file.
its wireless connected via my Bt home hub
I have tried restore , i have moved it to a new location . as i said i can get youtube and go to the itunes store but will not see my media files .
tried unplugging router, unplugged the apple tv, no success.
any other suggestions Winston?

[SOLVED] System stopped seeing my second HDD

Today after system upgrade and reboot my Arch stopped seeing my second HDD (it doesn't appear in /dev )
Disk: WD3200AAJS
dmesg:
# dmesg | grep ata1.01
[ 0.727453] ata1.01: ATA-7: WDC WD3200AAJS-00RYA0, 12.01B01, max UDMA/133
[ 0.727458] ata1.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.728464] ata1.01: no PIO support
[ 5.879153] ata1.01: no PIO support
[ 5.879155] ata1.01: disabled
Disk is still accessible by Windows(which boots from it) so it can't be broken(or can?)...
Last edited by Flanders (2013-04-01 12:00:55)

Storage Controller set as IDE (the second option to choose is AHCI)
Arch kernel doesn't have support for IDE devices anymore, you should select AHCI. The problem is that if you installed "Windows" with the controller as IDE then it will seace to work when you select AHCI.
For what i've read arround here, there is a workarround for IDE devices, but i don't know if it works anylonger:
pcie_aspm=force
Last edited by s1ln7m4s7r (2013-03-31 23:32:36)

I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen

RAID works, RAID Admin stopped seeing it...

Similar Messages

Maybe you are looking for