Rain Design iLap 15W - will it fit the MBP?

Anybody out there have a Rain Design iLap 15w? Does it fit your MBP comfortably? Rain Design claims that the 15w model fits the MBP.
I purchased one in anticipation of my MBP arriving, and now I'm concerned that the MBP will be slightly too big. Perhaps the rubber feet of the MBP will be sitting right at/on/beyond the edge and a little slip would cause aluminum-on-aluminum gouging. Ouch!
http://www.raindesigninc.com/store/index.php

I actually emailed Rain Design and asked about this, and they recommended the 15W. Here is what they said in response to my question:
"Thank you for your inquiry. At this point we do not have plans to make an
iLap for the MacBook Pro. However, we recommend the iLap 15" Widescreen
made for the Apple Powerbook for the MacBook Pro. The specs for the iLap
15" W is Width: 13.5" and Depth 9.5", which is the closest to the MacBook
Pro's dimension. Let us know if we can assist you further. Have a great
day!"
(I realize this doesn't really answer your question, but I thought I'd post what Rain Design had to say. In my original email, I had asked if they are going to make an iLap model specifically for the MBP.)

Similar Messages

Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

Curtis iMode IP200 iPod alarm clock radio- will it fit the classic?

Hey everyone! I currently just bought the 80gb ipod classic. I have a Curtis iMode IP200 iPod alarm clock radio that fits my old 4g ipod and I was wondering if the classic is suppose to fit in it. It doesn't seem to which is disappointing because I do like the clock. It came with lots of adaptors and I have the adaptor that came with my classic but it is not fitting. It looks like it can fit though...I don't much about the universal dock but will that make my classic fit this clock? or is the universal dock just another ipod charger... Thank-you.

The Extreme Mac Luna will do 1, 2, 3, and 5. Not many other radio docking stations will get close. Most don't even recognize the iphone3g. I was lucky enough to already have the ExtremeMac clock radio when I got my iPhone... it's white, has dual alarms, charges but does give you that error message and tells you to put the iphone in airplane mode. I never do, and it clicks a little when a call comes through, but I can live with that.

Has anyone noticed that standard headphones will not fit the iPhone when a

Not a big deal really can get an apple headphone adaptor like the one designed for the iPhone 2G.
But just noticed it today.

gotcha. i see, now this is interesting, as i may end up with apple bumper on and was mainly going to be using with headphones as ipod. as you say, ultimately could make use of one of those little adapter cables, i did that previously on the recessed iphone but an extra unweildy addition which is a shame
thanks for mentioning this anyway, i go in with my eyes open now.

I created an obituary using indesign but it will only print the even nuber of pages. What am I missing?

I created an obituary using in design but it will only print the even number of pages. What am I missing?

Check your print dialog box, see if Even Pages Only has gotten selected.

Need review of iLap by Rain Design

I'm looking at finding a functional and cool looking Podium for my new 17" PB - I used it for long times and wish for heat buildup to not pose an issue.
I'm looking at the iLap by Rain Design at http://www.raindesigninc.com/ilap.html
I'm sure some 17" PM users have this and I would appreciate any feedback reviews you, be it +ive or -ive.
Thanks in advance.

Barry,
I have had my iLap for a couple of weeks now and I love it. I am constantly using my 17" PB in bed or on my couch. I used to have the same problem with it getting real hot on my legs, but with the iLap I never feel any heat at all and my PB seems to run cooler presumingly due to better circulation under the laptop. The look of it is nice and it even has a velvet feeling cusion that is removable on the front if you want to put it on a desk or countertop (although I don't use it for that and there is even a warning about leaving the front cusion off near the end of a desk). The cusion on the back is not removable, but does swivel to compensate for the surface it is on. I have been very happy with and use it everyday while at home. I don't take it with me because it doesn't seem very easy to take it on the road, although it wouldn't be hard to throw it in a suitcase or seperate bag. It simply won't fit in my Brenthaven 17 Pro bag.
Hope this helps,
GeNomeZ

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud? I find iCal to be poorly designed and not very efficient.

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.

APC, CyberPower are reliable.
Look for 1500VA. As example:
APC
http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
Cyperpower:
http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/

I had a hard disc failure and had to reload Design suite 6 from disc. The program is now telling me I have 7 days to register the product or it will quit working. The serial number is already registered. It won't connect to the adobe site from the popu

I had a hard disc failure and had to reload Design suite 6 from disc. The program is now telling me I have 7 days to register the product or it will quit working. The serial number is already registered. It won't connect to the adobe site from the popup screen that comes up telling me I only have 7 days to register. What do I do?

Go to the Help menu in Photoshop and choose Activate. It should open a wizard allowing you to do this.
If that fails, Contact Customer Care after clicking on one of the activation links. The more information you give them, the easier it will be for them to help you.
Gene

Will the iPad 3 cases fit the new iPad 4?

Is the width, height, depth, size same????????? or is the size a little different?

LawrenceMKim wrote:
Is the width, height, depth, size same????????? or is the size a little different?
The physical dimensions are the same and all cases that work with the iPad '3' will also work with the iPad '4'. The center of the Lightning port is in the same location as the 30-pin dock connector center so while the opening may be larger than necessary when a '4' is placed in a '3' case it will work fine.
mende1 wrote:
iPad 2 cases don't work with 4th generation or 3rd generation iPad
The reason that some iPad 2 cases won't work with iPad '3/iPad '4' and some do is two-fold. First, the iPad '3'/'4' is a bit thicker which may cause a tighter than optimum fit--depending upon the case style. Stretchable cases won't be much of a problem, hard shell cases could be.
The second reason is because the iPad 2 only has a position requirement for the magnets to engage the on/off function, it does not also have a polarity requirement for the magnets as does the iPad '3'/'4'. If the polarity randomly happens to be a match it will work. If not it won't.
So to sum it up, if it is advertised to work with the iPad '3' or '4' it will work with the iPad 2 though the fit might be a little bit loose with some case styles. If it was built expressly for the iPad 2 it may or may not function fully with the iPad '3'/'4'.

Will iPad 2 covers fit the new i pad?

I have ordered my new iPad and already I am looking at accessories to keep it safe from the enviroment/elements. All I can find at the moment is iPad 2 accessories.
Will they suit the new iPad, or is there new covers etc out there?

If you're talking about the iPad 2 smart cover (made by Apple), yes, it most likely will.
If you're talking about iPad 2 covers, no.
That's because the New iPad is thicker and covers are tightly fitted to the device. You'll have no allowance space to fit your New iPad onto an iPad 2 cover.
Screen protectors on the other hand should work for both the iPad 2 and New iPad, in case you need to know.
A smart cover is simply just a screen cover made of polyurethane or leather with a built in magnetic strip and the cover latches to you iPad easily, it doesn't cover the aluminium back of the iPad though. It is not built to shield your iPad from shock.

Why does images in preview are in a different position and resolution than in design view? In design view I have to place the images of screen to fit in preview.

Why does images in preview are in a different position and resolution than in design view? In design view I have to place the images of screen to fit in preview.

Already changed in different settings. Here is a screenshot when set to "Original Size".

Will the iPhone 5 cases fit the iPod Touch 5?

Will an iPhone 5 case fit the iPod Touch 5?

Yes, Actually it fit really well and the dimension difference is technical not physical so the iPhone case hugs the iPod comfortably and there is not rattle or movement whatsoever.
I " don't think so" like others.. I've done this and own one!

How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?

Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916)

"The songs in this playlist will not fit on one Audio CD..."

I get this error message when trying to burn to a CD-R:
"The songs in this playlist will not fit on one Audio CD.
Do you want to create multiple Audio CDs with this playlist split across them?"
I'm trying to burn 17 songs. At the bottom of the playlist it tells me that those 17 songs take up 1 hour, 66.5 MB. If I have a 80 minute (1 hour, 20 minute) blank CD-R it should burn with no problems...shouldn't it? I've burned CD-Rs with iTunes on this computer before. I'm using iTunes 7.0.1.8.
Hand Built Black Box PC Windows XP Pro
Hand Built Black Box PC Windows XP Pro

: - (
I never found the solution to this. I have a Mac now.

The songs on this playlist will not fit on one audio CD"

How do I resolve the message "The songs on this playlist will not fit on one audio CD" I have tried everything, and this has just happened 2 days after my warranty expired. Any help much appreciated as I am not tech minded
Thanks

Firstly apologies for not providing more information. I am indeed trying to copy a playlist which I made and successfuly copied to a blank audio CD last week. Today I spent over one hour online looking for help and nothing that was suggested helped. I even tried copying an 18 min playlist (a meditation CD I use) and the same message came up ... a prompt asking me if it were ok to copy onto more than one CD - and even when I agreed to that, jsut to see what happened, the process stopped there (i.e. no copying was attempted by iTunes). I'd appreciate some insight. Thanks

Rain Design iLap 15W - will it fit the MBP?

Similar Messages

Maybe you are looking for