Raise_exception error when running DTP to writ optmized DSO

Hi guru's,
I have been getting this ABAP dump raise_exception when running a DTP to DSO,
i went thru the dump, actually this DSO updating another standard DSO, i deleted the writ optzd DSO request before deleting the request from target it is updating. Tried to activate the data flow, created a new DTP and tried to run DTP (full load), still getting the same dump.
any idea on this ,
thanks,
peter r

Hi ,
check this thread:
ABAP Dump "RAISE_EXCEPTION"
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/abap-runtime-errors-raise_exception-397395?cv=expanded
Hope it helps,
Supriya

Similar Messages

Error when running a report writer

Hi,
I am getting an error ("Internal error: More than 999 GREP blocks were requested") when running a report writer.
The error diagnosis is:
Internal error: More than 999 GREP blocks were requested
Message no. GR 215
Diagnosis
An internal error occurred in the Report Writer.
When running the program, you selected the option to store your results
     permanently. However, when the selected data was stored in blocks in
     the GREP file, the maximum number of blocks was exceeded.
System Response
The selection program was terminated.
Procedure
Inform your system administrator.
You may have to increase the block size for the GREP blocks.
Anybody knows how to increase the size of GREP blocks?
Thanks in advance.
Regards,
Arun Mohan

Hello,
The reason for the error GR215 is that too many data blocks are being
processed.
The explanation is one of the following:
- You have variation activated in the report
- A large group of objects is being processed and the report output
   fails due to the large data size
- the selected data is reaching the technical restriction
Check the SAP note 64537. This note advises you to set the BLOCK SIZE parameter
in the coding to 500000. However, the maximum value possible is 999999. You may -
if you already implemented the coding change of SAP note 64537 - raise the parameter
once more to 999999.
If the error then still remains the selected/processed data is definitely too much.
Then check the report definition in comparison to SAP notes 317574 and 387414.
Regards,
David

'File is not open' error when running DTP for flat file upload in BI

Dear Sir,
We are trying to upload master data from flat file for which we have
created respective DTPs. When we are running the DTPs we are getting an
error saying 'The file '&&filepath&&' is not open'. We also checked
that the file is not open, but still we are getting this error. Could
anyone please suggest what we have to do to solve this problem.
Many Thanks
Narendra

Hi,
I am currently facing the same error "Error in Source system". "The file 'path' is not open".
Could you please let me know how you resolved this issue.
many thanks.
Regards,
Madhusudhan

Error when running check writer

Hi ,
i am running check writer process in test instance and i am getting this error. Can anybody help me with this.
PL/SQL Output
HR_6990_HRPROC_CHQ_SRW2_FAILED
APP-PAY-06990: Report Writer report failed with an error

Hi,
I am also getting the same error when running Check Writer or Deposit Advice. I tried to see above two notes but did not help me much.
Here is the log file...
HR_6990_HRPROC_CHQ_SRW2_FAILED
APP-PAY-06990: Report Writer report failed with an error
Cause: The report failed to complete and returned an error condition.
Action: Check the report logfile in PAY_TOP/APPLOUT/xx.lg for reason for the failure.
We are using custom rdf file for both of the processes and are doing upgrade to R12 from 11.5.10.
Does anyone has encountered this situation.
Thanks,
Raghu

Getting error while running dtp

Hi
i am getting this error while running dtp, i am uisng BI 7.0 write optimized DSO
Duplicate data record detected (DS GMND0002 , data package: 000001 , data record: 4 )
ple let me know ur solutions for this problem,

Hi,
You are bound to get this error as write optimized behave in this pattern.
open the write opt DSO and in the settings you can see a check box for 'Do not check uniquness of data'
Check it if you want to use the duplicate records. But there will be two records (duplicate) uniquely identified by the technical key.
Now if you want to use delta concept in this then in DTP use delta by request.
If you further want to use delta then refer to this thread..
[write oprimized dso(URGENT);
Regards,
Priti

ORA-06502 - Error when running "Ask The Expert 0.9"

Hi ,
I successfully installed "Ask the Expert" package with Apex 3.0 on Oracle 10g Database 10.2.0.1.0. No error ocurred during the import in my Apex environment.
Besides that, i'm having problems when i tried to run the "Aks the Expert". It always shows the following message errors:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Error Unable to write activity log.
I think it was a problem with APEX instalation, but i could run the Sample Application of Apex without any problem.
I opened an SR in Metalink, but to my surprise, the analist of support don't know what's wrong with the demo "Ask de Expert".
The debug function of the application show the following commands before the error ocurrs:
0.01:
0.01: S H O W: application="103" page="1" workspace="" request="" session="6648566035252817"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -03:00
0.02: NLS: Language=en-us
0.02: Application 103, Authentication: CUSTOM2, Page Template: 667896385843019243
0.02: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.02: ...ok to reuse builder session for user:nobody
0.03: ...Application session: 6648566035252817, user=nobody
0.03: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 103, page 1
0.03: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.04: Computation point: BEFORE_HEADER
0.04: ...Perform computation of item: P1_CLEAN_CRITERIA, type=FUNCTION_BODY
0.04: ...Performing function body computation
0.06: ...Session State: Save "P1_CLEAN_CRITERIA" - saving same value: ""
0.06: Processing point: BEFORE_HEADER
0.06: ...Process "Read and Write Activity Cookie": PLSQL (BEFORE_HEADER) declare l_cookie_id number; begin owa_util.mime_header('text/html', FALSE); -- ate_api.read_activity_cookie; l_cookie_id := ate_api.fetch_activity_cookie_val( 'COOKIE_ID' ); -- if l_cookie_id is null then l_cookie_id :=
Content-type: text/html; charset=ISO-8859-1 Set-Cookie: activity_ask_expert=1|2400346189796; expires=Wed, 01-Jan-2020 08:00:00 GMT; path=/;
0.06: Encountered unhandled exception in process type PLSQL
0.06: Show ERROR page...
0.06: Performing rollback...
Please, could any one help me to solve this problem ? Metalink couldn't help me diagnosing what's wrong.
Thanks,
Sergio Coutinho

Hi,
I don´t know if it help the analisis, but i collect some informations about my environment:
1) HTML DB version
3.0.1
2) Database version
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
3) Database server operating system (as well, if 32-bit or 64-bit)
Solaris 5.9 - 64 bits
4) Database Parameters:
PARAMETER VALUE
NLS_CALENDAR GREGORIAN
NLS_CHARACTERSET WE8ISO8859P1
NLS_COMP BINARY
NLS_CURRENCY $
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_DUAL_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_LANGUAGE AMERICAN
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_NCHAR_CONV_EXCP FALSE
NLS_NUMERIC_CHARACTERS .,
NLS_RDBMS_VERSION 10.2.0.1.0
NLS_SORT BINARY
NLS_TERRITORY AMERICA
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
Could it explain why ASK THE EXPERT is running on hosted apex site and it´s
generating error when running in my environment?
Thanks for the help !
Sergio

"Missing Class" error when running web service

Hi,
I am getting an "Missing Class" error when running a web service. The web service was generated from a Java class via the "create J2EE web service" option.
The web service has a JAX-RPC handler class added, which belongs to the same package as a logging class. The logging class is used to write to a file for debug purposes. A "missing class" error is being generated whenever I attempt to invoke the web service (via the enterprise manager test util), the error refers to the logging class which is used by the main handler class. The JAX-RPC handler works fine by itself, the error is only seen when I attempt to use the logging class.
I have re-built, re-deployed from scratch again, but still get the same error! Am I missing something simple here?
thanks for any advice

Cant you paste some of your code, formatted in code tags? It looks like there is a problem passing some of the XMl response, it doesnt like a tag html.
If you post some code somebody might actually be able to help you.

Error when running a report in BPC NW

I am getting the following error when running a report for my application in BPC NW.
EVDRE encountered an error retrieving data from the Web Server (retrying in (X) seconds).
This error comes with this dialog option box to either continue or cancel retrying retrieving data. Retrying doesn't help either.
Any report I run (on any of my appsets), I get this error. I used the EVDRE function and also tried running a report using the template as the basis. But I get the error either way.
Does anyone know why this error is occurs or how to debug this issue. I saw some information about this in earlier threads but could not make much out of it.
Appreciate any assistance.

Sanjay,
This is a very generic error...Couple of places to look for....
1)Reprocess the application (Modify application + Reassign SQL Index + Process Application)
2)optimizing the application sometimes helps (Full Optimize + Compress Database + Index defragmentation).
3)Create a "evdataserver_debug.txt" in user's private publication folder on server side to populate very detail level logging and check the log on client side EVDRE_LOG.txt for further peek into where things are getting messed up.
if evdataserver_debug.txt does not get populated on BPC 5.x...it is an issue with IIS authetication on Application server.
4)You have to check the event viewer into .NET server and also the BPC logs which can be found into
BPC\Logging for further details ..
Hope this helps..
Edited by: Vishal Mahawadhi on Jun 24, 2009 9:50 AM

Getting the MDX query select error when running a webi report on BI query

Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
Jeethender

The Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

SQL serever 2012 Setup has encountered an error when running a windows installer file

I am trying to install SQL server 2012 Express on a windows 7 PC for 2 days now. I feel like banging my head against the wall.
I keep getting the following errors here's the full log
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer
to Help and Support for more information. HRESULT: 0x8007054F. Windows Installer file: C:\Users\Receno\AppData\Local\Temp\SQL Server 2012\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20150109_213740\SqlSupport_Cpu64_1_ComponentUpdate_1.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325

hmmm..so which hotfix do I apply ?
SQL Server 2012
All (Global) x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86

ORA-04062 error when running forms with different users

ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;

Error when running allocation logic

I am running the following allocation logic and get the following error:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=<<<
*DIM ENTITY WHAT=A1000; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM TIME WHAT=2009.JAN; WHERE=>>>; USING=BAS(2009.TOTAL); TOTAL=<<<
*ENDALLOCATION
UJP_RULE_EXCEPTION:Missing [] on property name: WHAT=CE0004010. I get this error when executing the script using the program "UJK_SCRIPT_LOGIC_TESTER". I also get a similar error when running it via the data manager package.
Any thoughts on why this error is happening?

Hi Sanjay,
I think you are using formula property for any of the dimension member used in the Allocation logic.
FYI Allocation will not work fine for the dimension members which is calculated using the formula written in the formula Property.
There is no problem with your script it looks fine.
Hope this might help you.
Regards,
G.Vijaya Kumar

How to solve error when run Depreciation (T-Code:AFAB)

Dear All Experts,
Hi,
I found error when run Depreciation for period 9 FYI. I had run Planed posting period Depreciation (TCode: AFAB). with fiscal year: 2010, posting period: 9, reason for posting run: Planed posting run. Select on Test Run. Then i found error message as below.
Documents manually posted within dep.doc.number range
     Message no. AA728
Diagnosis
     In the number range interval for the document type for posting
     depreciation, a document has been posted which was not created within
     the framework of depreciation posting. The last document posted by
     depreciation posting was assigned the number .
Procedure
     Contact your Systems Specialist. When changing the number range interval
     for the document type in depreciation posting, you have to specify a new
     interval in which no documents exist. Using organizational measures, you
     can guarantee that there are no documents apart from those created by
     depreciation posting in this number range.
Would you help me how to solve this error?
Thank you in advance
Best Regards
Utarat.P

Hi Utarat,
first question is: have you really manually posted a Documents within dep.doc.number range
If you post with RABUCH00, note 193984 could be relevant for you.
Check if the intervall in Table TABA don't fits with the Intervall in BKPF.
Example:
TABA
MANDT BUKRS AFBLGJ AFBLPE AFBANZ BLNRF      BLNRT      XBUKZ
100   XXXX   2010   004    01     4200000013 4200000016 X
100   XXXX   2010   005    01     4200000017 4200000020 X
100   XXXX   2010   006    01     4200000021 4200000024
On the other Hand In Table BKPF (or Tr. FB03) you can see that 4200000037 already
exits.
BUKRS BELNR      GJAHR BLART BUDAT      CPUDT      CPUTM    TCODE
XXXX   4200000024 2010 YY    30.06.2010 06.07.2010 19:36:30 ABF1
XXXX   4200000037 2010 YY    30.06.2010 06.07.2010 19:37:47 ABF1
Regards Bernhard

Raise_exception error when running DTP to writ optmized DSO

Similar Messages

Maybe you are looking for