Raise purchase order in me21n for 100 goods

HI,
i have problem. i raise purchase order in me21n for 100 goods.for that purchase order in MIGO i received 75 goods.when the invoice verification i found only 50 goods.how to clear in gr/ir in the month end process. please someone help me.
regards
subbarao

Hi
Reverse the MIRO and MIGO documents , and Post the MIGO and MIRO with actual quantity received
Regards
Rams

Similar Messages

Update was terminated while creating purchase order from ME21N

Hi Experts,
We are getting this dump when try to create purchase order from ME21N;
Our system ECC 6.0 and IS-AFS (Apparel & Footwear Solution) V600 component has installed,
How can we prevent this error,
Regards
Here is the dump and sm21 log,
Runtime Errors         LOAD_PROGRAM_NOT_FOUND
Exception              CX_SY_PROGRAM_NOT_FOUND
Date and Time          10.10.2008 10:22:03
Short text
     Program "RMCMS431 " not found.
What happened?
     There are several possibilities:
     Error in the ABAP Application Program
     The current ABAP program "SAPLMCS4" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     or
     Error in the SAP kernel.
     The current ABAP "SAPLMCS4" program had to be terminated because the
     ABAP processor detected an internal system error.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
     caught in
    procedure "TMC2F_FROUT_CALL" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely "RMCMS431 ".
    However, program "RMCMS431 " does not exist in the library.
    Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error
How to correct the error
    Check the last transports to the R/3 System.
    Are changes currently being made to the program "SAPLMCS4"?
    Has the correct program been entered in table TSTC for Transaction "ME21N "?
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "LOAD_PROGRAM_NOT_FOUND" "CX_SY_PROGRAM_NOT_FOUND"
    "SAPLMCS4" or "LMCS4F10"
    "TMC2F_FROUT_CALL"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "TMC2F_FROUT_CALL" "(FORM)", or its possible occurrence must be declared in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
sm21 log ;
Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20081010102203saptest_TET_00 EYUCE 100
Update terminated
> Update key: F39796DD5421F1509233001E0BD601E0
> Update module: MCE_STATISTICS_UPD_V2
Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred

Please follow the oss note 800335
V2 Update terminations in Purchasing transactions after upgrading or installing AFS 5.0 release.
Other terms
AFS, LIS, MIGO, ME22N, OLI3, S433, S431
Reason and Prerequisites
AFS Purchasing infostructure S431 is no longer used. S433 is the valid infostructure for the release AFS 5.0.
Solution
Please do the following.
For customers upgrading to AFS 5.0 only:
> Rebuild Infostructure S433.
- Goto transaction: OLI3 (Statistical Set up of Infostructures)
- Info structure to be compile: S433
- Specify the 'Name of run'.
- Execute.
> Please also follow the instructions given below.
For both Upgrade and Non-upgrade Customers:
> Create the report 'ZDELS431'.
- Transaction: SE38
- Give Program name as ZDELS431.
- Create (F5).
- Title : 'Program to delete S431'.
- Type : 1 (Executable Program).
- Status: T (Test Program).
> Copy the program text from the note and paste in the program.
> Save and activate the program.
> Execute the report for all clients in Update mode.
(Two check-boxes will appear: P_ALL_CL, P_UPDATE.
   Please check both of them).
This report will delete all the references to infostructure S431.

G/L Account Error While doing Purchase Order In ME21N

Hi,
While Doing Purchase Order in ME21N,i am getting the below error.Kindly help me.
G/L account 809001 cannot be used (please correct)
Message no. ME045
Diagnosis
Comparison of the field selection strings from the G/L account 809001 and the account assignment category F reveals that there is an incompatible combination of field selections for the field selection group 'Network'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K.
Procedure
Please enter a correct G/L account.
Thanks
Supriya

Hi Supriya,
U will have to check the field status of account assignment category F in tcode OME9 and compare it with the Field status group that is assigned to GL 809001.
Kindly note that the field status has a prority in the following order.
Supress
Display
Required
Optional
Thus if the network field is suppressed in GL field status and option in account assignment category F, then the below error would come.
Regards,
Kiran

Purchase order in Me21N, Me59N, MEMASSPO

I need to insert an authority check when user try to create a purchase order in Me21N, Me59N, MEMASSPO. Does any one know an exit, bapi ... that involves all those transactions? Please help me.
Thanks,

Use the following auth objects in a role and test:
M_BEST_EKO ACTVT=01;EKORG= Purchasing Organization for which you want to give authorization
M_BANF_BSA ACTVT=01;BSART= Document type for which you want to give authorization
Have a look at this note:
751129 - Authorizations in Enjoy Transactions in Purchasing

How to create purchase order using VA01 for BAPI?

how to create purchase order using VA01 for BAPI?

Hi Arun,
Please check this link
Example Program for BAPI_PO_CREATE1
Re: BAPI_PO_CREATE1
Questions in BAPI_PO_CREATE1
Problem with BAPI_PO_CREATE1
*& Report BAPI_PO_CREATE *
REPORT bapi_po_create.
Input File Declaration
TYPES: BEGIN OF ty_input_file,
column1 TYPE char50,
column2 TYPE char50,
column3 TYPE char50,
column4 TYPE char50,
column5 TYPE char50,
column6 TYPE char50,
column7 TYPE char50,
column8 TYPE char50,
column9 TYPE char50,
column10 TYPE char50,
column11 TYPE char50,
column12 TYPE char50,
column13 TYPE char50,
column14 TYPE char50,
column15 TYPE char50,
column16 TYPE char50,
column17 TYPE char50,
column18 TYPE char50,
END OF ty_input_file.
DATA: i_input_file TYPE STANDARD TABLE OF ty_input_file,
wa_input_file TYPE ty_input_file.
CONSTANTS: c_path TYPE char20 VALUE 'C:\',
c_mask TYPE char9 VALUE ',.,..',
c_mode TYPE char1 VALUE 'O',
c_filetype TYPE char10 VALUE 'ASC',
c_x TYPE char01 VALUE 'X'.
PARAMETERS : p_fname LIKE rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
Browse Presentation Server
PERFORM f4_presentation_file.
START-OF-SELECTION..
Read presentation server file
PERFORM f1003_upload_file.
IF NOT i_input_file[] IS INITIAL.
PERFORM split_data.
ENDIF.
*& Form f4_presentation_file
*& F4 Help for presentation server
FORM f4_presentation_file .
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = c_path
mask = c_mask
mode = c_mode
title = text-001
IMPORTING
filename = p_fname
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_presentation_file
*& Form f1003_upload_file
*& Upload File
FORM f1003_upload_file .
DATA: lcl_filename TYPE string.
lcl_filename = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lcl_filename
filetype = c_filetype
has_field_separator = c_x
TABLES
data_tab = i_input_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
ENDFORM. " f1003_upload_file
*& Form split_data
Collect data for creating Purchase Order
FORM split_data .
DATA: i_poitem TYPE STANDARD TABLE OF bapimepoitem,
i_poitemx TYPE STANDARD TABLE OF bapimepoitemx,
i_poitem_sch TYPE STANDARD TABLE OF bapimeposchedule,
i_poitem_schx TYPE STANDARD TABLE OF bapimeposchedulx,
i_acct_*** TYPE STANDARD TABLE OF bapimepoaccount,
i_acct_assx TYPE STANDARD TABLE OF bapimepoaccountx,
i_services TYPE STANDARD TABLE OF bapiesllc ,
i_srvacc TYPE STANDARD TABLE OF bapiesklc,
i_return TYPE STANDARD TABLE OF bapiret2,
wa_header TYPE bapimepoheader,
wa_headerx TYPE bapimepoheaderx,
wa_poitem TYPE bapimepoitem,
wa_poitemx TYPE bapimepoitemx,
wa_poitem_sch TYPE bapimeposchedule,
wa_poitem_schx TYPE bapimeposchedulx,
wa_acct_*** TYPE bapimepoaccount,
wa_acct_assx TYPE bapimepoaccountx,
wa_services TYPE bapiesllc,
wa_srvacc TYPE bapiesklc,
wa_return TYPE bapiret2,
ws_po TYPE bapimepoheader-po_number.
break gbpra8.
wa_services-pckg_no = 10.
wa_services-line_no = 1.
wa_services-outl_no = '0'.
wa_services-outl_ind = c_x.
wa_services-subpckg_no = 20.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 10.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 01.
wa_srvacc-serial_no = 01.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
LOOP AT i_input_file INTO wa_input_file.
IF wa_input_file-column2 EQ 'HD'.
wa_header-doc_type = wa_input_file-column3.
wa_header-creat_date = sy-datum.
wa_header-created_by = sy-uname.
wa_header-vendor = wa_input_file-column4.
PERFORM conversion_output USING wa_header-vendor
CHANGING wa_header-vendor.
wa_header-comp_code = 'DE03'.
wa_header-purch_org = 'DE03'.
wa_header-pur_group = 'DE1'.
wa_header-vper_start = wa_input_file-column9.
wa_header-vper_end = wa_input_file-column10.
wa_headerx-comp_code = c_x.
wa_headerx-doc_type = c_x.
wa_headerx-creat_date = c_x.
wa_headerx-created_by = c_x.
wa_headerx-vendor = c_x.
wa_headerx-purch_org = c_x.
wa_headerx-pur_group = c_x.
wa_headerx-vper_start = c_x.
wa_headerx-vper_end = c_x.
ENDIF.
IF wa_input_file-column2 EQ 'IT'.
wa_poitem-po_item = wa_input_file-column3.
wa_poitem-short_text = wa_input_file-column6.
wa_poitem-plant = wa_input_file-column8.
wa_poitem-quantity = '1'.
wa_poitem-tax_code = 'V0'.
wa_poitem-item_cat = 'D'.
wa_poitem-acctasscat = 'K'.
wa_poitem-matl_group = wa_input_file-column7.
wa_poitem-pckg_no = '10'.
APPEND wa_poitem TO i_poitem .
wa_poitemx-po_item = wa_input_file-column3.
wa_poitemx-po_itemx = c_x.
wa_poitemx-short_text = c_x.
wa_poitemx-plant = c_x.
wa_poitemx-quantity = c_x.
wa_poitemx-tax_code = c_x.
wa_poitemx-item_cat = c_x.
wa_poitemx-acctasscat = c_x.
wa_poitemx-matl_group = c_x.
wa_poitemx-pckg_no = c_x.
APPEND wa_poitemx TO i_poitemx.
wa_poitem_sch-po_item = wa_input_file-column3.
wa_poitem_sch-delivery_date = sy-datum.
APPEND wa_poitem_sch TO i_poitem_sch.
wa_poitem_schx-po_item = wa_input_file-column3.
wa_poitem_schx-po_itemx = c_x.
wa_poitem_schx-delivery_date = c_x.
APPEND wa_poitem_schx TO i_poitem_schx.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 01.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 02.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 01.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 02.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_services-pckg_no = 20.
wa_services-line_no = 2.
wa_services-service = wa_input_file-column9.
wa_services-quantity = '100'.
wa_services-gr_price = '100'.
wa_services-userf1_txt = wa_input_file-column13.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 20.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 02.
wa_srvacc-serial_no = 02.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_header
poheaderx = wa_headerx
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
POEXPIMPHEADER =
POEXPIMPHEADERX =
VERSIONS =
NO_MESSAGING =
NO_MESSAGE_REQ =
NO_AUTHORITY =
NO_PRICE_FROM_PO =
IMPORTING
exppurchaseorder = ws_po
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
return = i_return
poitem = i_poitem
poitemx = i_poitemx
POADDRDELIVERY =
poschedule = i_poitem_sch
poschedulex = i_poitem_schx
poaccount = i_acct_***
POACCOUNTPROFITSEGMENT =
poaccountx = i_acct_assx
POCONDHEADER =
POCONDHEADERX =
POCOND =
POCONDX =
POLIMITS =
POCONTRACTLIMITS =
poservices = i_services
posrvaccessvalues = i_srvacc
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POEXPIMPITEM =
POEXPIMPITEMX =
POTEXTHEADER =
POTEXTITEM =
ALLVERSIONS =
POPARTNER =
break gbpra8.
LOOP AT i_return INTO wa_return.
ENDLOOP.
ENDFORM. " split_data
*& Form conversion_output
Conversion exit input
FORM conversion_output USING p_ip
CHANGING p_op.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_ip
IMPORTING
output = p_op.
ENDFORM. " conversion_output
Best regards,
raam

Tracking Requisition to Raising Purchase order

Hello All,
I am quite new to Financials. In PO module.
As per my knowledge once the requistion raised upon approval Purcahse Order is created. So now I want to calculate the time duration between the purcahse requistion raised and Purchase Oder created.
How can I do this.As I could not find any link between po_requsition_headers_all and po_headers_all
Thanks and kindRegards,
Praveen.

Hi Orion
I suggest you to translate it to english before somebody feels awful. Orion's customer wants mantain a kind of register to trace or manage the traceability for this flow from SO to PO in a cross company scenario.
If a understand you, you do this flow:
SO from a customer not cross company-> request from this SO to other company cross company -> PO with ME59 (is the third part customer if I'm right)
Do you check all flow in VBFA table? I suggest to see the SAP Note 627846 - AFS: Purchase order document flow for
sales order incorrect, although it's so older, it gave me ideas in the past. I suggest you to avoid 'handle' the fields related with key fields (number of documents, number of items, and so on). Create reports or create customer tables and populate records for this trace. After, you can create lists for your customer to know about this traceability.
If you are agree other possibilty is enhance SAP tables with customer fields and see them in the documents. There a lot of tools to do it (VOFM subroutines in the copy rules, BADI's and enhancemetns to see customer fields in new tabs in SO, PO and so on).
I hope this helps you
Regards
Eduardo
Edited by: E_Hinojosa on Sep 26, 2011 6:42 PM
Edited by: E_Hinojosa on Sep 26, 2011 6:42 PM
Edited by: E_Hinojosa on Sep 26, 2011 6:43 PM

When creating entry sheet,the error raise:purchase order incomplete(parked)

dear all:
When I create entry sheet of one po with tcode ml81n,the error raise:purchase order incomplete(parked)message id:se215.
How to solve this?Thank you!
maojian

hi Jian,
Go into the PO using ME22N, check whether there is any warning message in it.Complete the PO and then only save it.
Also check whether the PO is to be released,if it is yes then Release it and then create Entry Sheet using ML81N.wrt PO.
Also check whether you are referencing a park or hold PO.
Hope it will help you.
Cheers
Manoj K Singh

Goods receipt for purchase order not allowed for a particular wbs

hello everybody..
Am creating a good receipt for a purchase order using the T-CODE-: MIGO...
While doing so am getting an error as " goods receipt for purchase order not allowed(wbs element)".
What can be done to rectify this error?
Plz do help me....
Regards,
Deepika
Moderator message: not directly related to ABAP development, please have a look in the appropriate functional forum, study the long text of this error message.
Edited by: Thomas Zloch on Dec 1, 2010 5:52 PM

Hi Br. Ajay M,
Released the order and Status line as follow
REL AVAC BUDG GMPS
but the error changed while reverse the document
item 0001 Order is invalid.
Many thanks for your kindly reply.
regards,
Steven

Block asset for purchase order (TS ME21N)

Hi,
The company where I work need that if an asset is capitalized it will not be able to receive new assigment from the purchase order (by TS ME21N); but this is only for some users, so some specifics users can post a purchase order with an asset which has already values and other users not.
Any idea if it is posible to make something?
thanks
cecilia

Hi,
For this you need to go for user exit in purchase order.
Condition will be like:
IF EKKO-ERNAM = A, THEN SYSTEM SHOULD PASS EKKN-BUKRS, EKKN-ANLN1, AND EKKN-ANLN2 TO TABLE ANLA TO CHECK ANLA-AKTIV = BLANK, IF IT IS NOT BLANK ASSIGN AN ERROR MEESSAGE THERE TO STOP THE USER
A = your preferred user, who is not supposed to create the PO for an asset, which is already capitalised.
Please co ordinate with your ABAP resource for this development.
Hope this might help you
Thanks,
Srinu

BAdI or USEREXIT for changing data of purchase order header - ME21N

hello all,
I would like to ask you any way to change the field "reason for change" of the Purchase Order header.
I tried implementing the method PROCESS_HEADER of IF_EX_ME_PROCESS_PO_CUST
or changing reason_code of structure ekko in user exits EXIT_SAPMM06E_006 and EXIT_SAPMM06E_006
but it seems not to work.
How can i do?..
sap. v. ecc 6.0

>
Shiva Kumar wrote:
> Use the user exit : EXIT_SAPMM06E_012: This is triggered on saving of a PO...and user can add validations etc in the exit...
> Cheers
It doesn't work...
>
Martin Voros wrote:
> you get reference to object IM_HEADER in method PROCESS_HEADER of BADI ME_PROCESS_PO_CUST. On this object you can call two methods - GET_DATA and SET_DATA. GET_DATA returns structure with type MEPOHEADER. You can change your field here and then call method SET_DATA with your modified structure. This should work.
> Cheers
..same thing for this solution...
the field that i want to change is RSCOD inside structure EREVGRID...it seems to have also get_data and set_data methods ( IF_REVISION_ITEM_DCM ),
but I don't know which BAdI to implement that has a object type ref to EREVGRID...
Edited by: E_M on May 13, 2008 11:08 AM

In individual PO senario want to change plant while raising purchase order

hello friends
i am doing individual P. O. in this scenario
when i raise sales order, purchase req. is generated wrt tht when i am doing PO system copies the plant from sales order.
but i want to that material should deliver to other plant.
material is trading goods
roshan ahire

Roshan
When you create a sales order for a customer and then subsequently create a PR-PO wrt to sales order the delivery address will be that of the customer. I have not come across a scenario where you create a sales order to a customer and then procure it externally to deliver at some other site. Play around with the acct assignment and item categories in Purchasing to see if your scenario can be helped. If you can explain the business scenario elaborately I can give a shot.
Thanks
Anandha

MRP not considering open purchase orders when planning for open sales order

Dear Experts,
1.I have open sales orders as well as planned Independent requirements for finished goods for the current month. Also I have open puchase orders for raw materials which is part of the Bill of material of the finished goods for the current month.
Please what do i need to do to make MRP consider my open purchase orders when the system is planning for the open sales orders.
2 what tcode can I use to delete all purchase reuisitions in the sytem

There was no response to these questions so i had to close it to make space for another

Purchase order not visble for confirmation in SRM 7.0 portal

Hi all,
I am basically a portal consultant .The functional consultant configured in such a way that once the user creates a shopping cart it will create a Purchase order.
But when i go into central confirmation role and click on create confirmation document and search for the Purcahse order it is not getting displayed.
But There are some 11 pos in the system with 9 pos of status order and 2 pos status saved.
Please help me in resolving this.
Thanks and regards,
Rajesh
Edited by: Rajesh A on Jul 2, 2009 2:24 PM

Hope you might have some option called Express confirmation. check it up.
You can use this business process to confirm the receipt of goods. In SAP SRM, purchasers can create confirmations themselves, even if the purchase order is in the back-end system. It is possible to create express confirmations directly in the Check Status application without having to switch to another application.
Alternatively, an internal dispatcher or shipping department can take delivery of goods and confirm centrally. In this case, an additional approval workflow through the supplier is possible. Then, the goods receipt is posted in the back-end system.
You can also cancel an existing confirmation at item level. In addition to all of this, you can return partial quantities of individual items (or of all items) to your suppliers, and state the reasons for these return deliveries. These reasons are also transferred to the back-end system
br
muthu

How to Close a Purchase Order line Item for GRN W/O Deleting the Line Item

Hi,
I want to Close a line item for Goods Receipt in a Purchase Order. How Do I do this?
My Requirement is that the system should not allow for Goods Receipt for the Line Item.
I know of 2 options which are difficult to Implement.
1) I delete the Line item
2) Put the delivery Completed Indicator - For this the system still allows for GR
any Other way of Closing the line Item
NS

Hi, you can close the Line item by, doing partial GRPO, i.e if u use the Copy From option in GRPO, there comes a Draw docuemnt wizard, there you can choose one line item, and then put GRPO for that line item,
The Wizard comes only in the Copy From option,
Close the Line item, by right clicking on that Line item and then 'close Row'
Edited by: Gayathri Panneerselvam on Dec 19, 2008 10:25 AM

Purchase order message Re-determination after goods issue is posted

We have a requirement to trigger special function message type (which creates a flat file) in a purchase order when goods issue for all items are posted. We have created a requirement routine for message type to check if goods issue is posted for all line items. Goods issue is posted using BAPI which uses transaction MIGO. When goods issue is posted, we want output to be triggered in purchase order. Requirement is working fine but is there any way to trigger output automatically without going to PO?
After goods issue is posted, if we go into purchase order using ME22N then we see output proposed or if we make any changes in PO then output is proposed. This will not happen in real life though.
Any suggestion will be highly appreciated. Thanks.
Sanjay

Hello,
You can create a new output message record in NAST using RV_MESSAGE_UPDATE:
CALL FUNCTION 'RV_MESSAGE_UPDATE'
      EXPORTING
        msg_kappl = 'EF'
        msg_objky = w_objky
      TABLES
        msg_xnast = itab_nast
        msg_ynast = itab_nast_old
      EXCEPTIONS
        no_update = 1
        OTHERS    = 2.
Once the record is created, you may submit the program RSNAST00 to output the message.
Thanks,
Venu

Raise purchase order in me21n for 100 goods

Similar Messages

Maybe you are looking for