Raise up near to ear the sensor didn't work

I have recently upgraded my iPhone 4S to ISO 7.1.1, then after the screen will not lock while calling and raise up near to ear is not working. Please let me know if there are any fix for the same.
Thanks, Paddy

Reset the phone (no data loss): press both the home and lock button for at least 10 seconds, releasing when the Apple logo appears.

Similar Messages

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

Hi kamfong,
Went to Settings where?
If you want to use your exisiting Apple ID on your iPad, you need to:
1. Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
2. Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
Cheers,
GB

In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
i have been provided with this info
You can find troubleshooting tips, how-to articles, and moderated
> > discussion forums on our support website:
> >
> > www.apple.com/support
> >
> > iPhone: Basic troubleshooting
> > http://support.apple.com/kb/HT1737
> >
I did every step in the link that i have been provided with (thank you), but I’m
still experiencing the same issue. My experience with Apple has been
excellent and this has been the first time I have experienced something
like this with an Apple product. I hope we can find a quick solution.
In order to get the iPhone 5 as soon as it launched (being a major fan of
Apple products!), I purchased my iPhone 5 from the UK through a friend of
mine who lives there.
My question is: can I have the faulty device replaced within Saudi by one
of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
avoid the disruption, complication and expense of sending it back to the
UK.
Could you advise whether this is possible or not, and if not how should I
go about having the device replaced?
Thank you in advance for your cooperation.

Nice try! Take a hike.

Repairing Library Permissions: But the instructions didn't work clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Went to Help. But the instructions didn't work
clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Give this a try:
1 -be sure to have a current backup of the iPhoto library.
2 - download and launch http://www.macchampion.com/arbysoft/BatChmod.
3 - click on the File button, locate and select your iPhoto Library.
4 - check the Unlock and Apply to enclosed checkboxes.
5 - make no changes to the other checkboxes
6 - click on the Apply button.
OT

So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't

So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't work. I don't know what to do!!

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

I have a MacBook Pro and the batter icon has an "X" in it. I attempted resetting the SMC but it's still there. Not sure if the SMC didn't work or I have another problem. Help?

I have a MacBook Pro and the batter icon has an "X" in it. I attempted resetting the SMC but it's still there. Not sure if the SMC didn't work or I have another problem. Help?

You can try the SMC again.
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself
You can also try a NVRAM/PRAM reset (at the bottom of the same page in the above link
Also hold the OPTION key and click on the Apple logo in the menu bar and click on system information, in the left column select power. Under the battery info see if it is charging (with the power adapter plugged in) as well as the health info (condition should be normal), and battery installrd (should be YES)
If other than these are different you may want to take it in to a Genius bar for a full diagnosis they will do that for dree.
Hope this helps

Want to make an apple ID but the visa didn't work! Please help!

I come from Indonesia. This is my first time using apple(ipad) and I want to make an apple ID but I tried more than twice and but the visa didn't work well, and I feel disappointed and the system confused me, and why do we need to submit our visa or stuff, in fact that we rather
use free apps to download? And if it is a problem between the bank and apple itself so what can I do Now? Anyone knows how to solve my problem, please help me, I really appreciate all your suggestions. Just contact me through my email **** Thank you.
<Personal Information Edited By Host>

You are required to provide credit card details to download apps be it free or paid.
Nothing will be deducted from your credit card if the app is free.
There will be a authorizing hold of US$1.00 to verify your account information. It will be credited back to your account later.

HT1423 i am replacing ram in an early 2009 imac. easy - right? but the pulling on the tabs didn't work. i have had the ram sticks out before; but now they don't budge. should i apply more pressure? use a tool to pull harder? will the tabs break off?

i am replacing ram in an early 2009 imac. easy - right? but the pulling on the tabs didn't work. i have had the ram sticks out before; but now they don't budge. should i apply more pressure? use a tool to pull harder? will the tabs break off?
sorry for the format - my 1st question...

thanks Kappy.
the computer has beem working for years after my 1st ram removal; but i may have pushed them back too hard. i did pull firmly - tried pulling up slightly; tried tugging on the sides of the stick; pulling in pulses. the only thing i have not tried is using needle nose plyers with protection on the tab film itself.
have you had the pulling harder ever work? or break the tab?

When I answer my phone calls the sensor doesn't work, so it keeps going to speaker or mute. How do it ensure my sensor works

When I answer my phone calls the sensor doesn't work, so it keeps going to speaker or mute. How do it ensure my sensor works

Remove all apps from multitasking bar. Double click Home button then tap and hold an icon and tap on little x on every app. Then reset. Hold down Home and Power button until Apple logo appears.

I connected to my hotspot on my phone but it took two tries, the first didn't work. The message saying it didn't work won't go away and i can't even shut down. Help

I tried connecting to my phones hotspot and the first time it didn't connect. I tried again and it worked fine but the message saying it didn't work was still there. After a day it is still there and my computer even died and when it charged again the message was still there. My computer won't allow me to shut down or restart because i can't close the system preferences. What do I do?

Welcome to the Apple Support Communities
Hold Sleep and Home buttons until the device restarts, so you should be able to use it

HT1212 why the itunes didn't work

thx

yes, java1.1 has scroll panel, but can't match all
the request as I need, so I extend a scroll bar, and
add it to a panel. You can see why I use a thread to
post a key-up event, I want my "scroll panel" can
accept this event and do their job, and they DO it in
the applet viewer, but they didn't work in browser(IE
with Jdk1.5 plug-in).
In fact, the whole project almost finished, so I
can't make big modify.But, what if a 'small modify' can't serve you?
Ill mannered OS and/or application could have eaten up raw events before they
arrive at your humble Java application. Try this on Win and IE:
<html><body>
<applet code="ButtonTest" width="300" height="300"></applet>
</body></html>
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class ButtonTest extends Applet implements ActionListener {
     Label label;
     public void init() {
          Button b1 = new Button("Apple");
          b1.addActionListener(this);
          add(b1);
          label = new Label("                 ");
          add(label);
     public void actionPerformed(ActionEvent ae) {
          int modifiers = ae.getModifiers();
          if ((modifiers & ActionEvent.CTRL_MASK) != 0) {
               label.setText("CTRL");
                else {
               label.setText("-");
}

Why the postEvent didn't work

I add a thread to postEvent to a applet, send a key-up event, to let the applet scroll up, it do work in applet viewer, but didn't work in IE. why

yes, java1.1 has scroll panel, but can't match all
the request as I need, so I extend a scroll bar, and
add it to a panel. You can see why I use a thread to
post a key-up event, I want my "scroll panel" can
accept this event and do their job, and they DO it in
the applet viewer, but they didn't work in browser(IE
with Jdk1.5 plug-in).
In fact, the whole project almost finished, so I
can't make big modify.But, what if a 'small modify' can't serve you?
Ill mannered OS and/or application could have eaten up raw events before they
arrive at your humble Java application. Try this on Win and IE:
<html><body>
<applet code="ButtonTest" width="300" height="300"></applet>
</body></html>
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class ButtonTest extends Applet implements ActionListener {
     Label label;
     public void init() {
          Button b1 = new Button("Apple");
          b1.addActionListener(this);
          add(b1);
          label = new Label("                 ");
          add(label);
     public void actionPerformed(ActionEvent ae) {
          int modifiers = ae.getModifiers();
          if ((modifiers & ActionEvent.CTRL_MASK) != 0) {
               label.setText("CTRL");
                else {
               label.setText("-");
}

The EXCEPTION didn't work correctly

I made that code :-
CREATE OR REPLACE FUNCTION qq (v_id NUMBER)
RETURN NUMBER
IS
sal NUMBER;
BEGIN
SELECT salary
INTO sal
FROM employees
WHERE employee_id = v_id;
RETURN sal;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ('NO such ID for any Employee in this company ');
END;
and when I executed it like that :-
SQL> BEGIN
2 DBMS_OUTPUT.put_line (qq (942));
3 END;
4 /
NO such ID for any Employee in this company
BEGIN
ERROR at line 1:
ORA-06503: PL/SQL: Function returned without value
ORA-06512: at "HR.QQ", line 10
ORA-06512: at line 2
SQL> ed
Wrote file afiedt.buf
1 BEGIN
2 DBMS_OUTPUT.put_line (qq (142));
3* END;
SQL> /
3100
PL/SQL procedure successfully completed.
why the exception line :-
NO such ID for any Employee in this company
come with the error below :-
BEGIN
ERROR at line 1:
ORA-06503: PL/SQL: Function returned without value
ORA-06512: at "HR.QQ", line 10
ORA-06512: at line 2
I want the exception Line - that I wrote - only appear without oracle errors ........ how can I do that ?

Put a RETURN statement inside you exception handler or raise an error.
You can do:
raise_application_error (-20012, 'NO such ID '||to_char(v_id)||' for any Employee in this company ');

HT4623 I don't know what has happened but the update didn't work and now it asks me to restore the iPad. I don't know whether I should as i'm too scared it will delete everything i had on my iPad. What should i do if i did backup my iPad before the update

So i have a serious problem regarding the iOS update on my iPad 4 and i don't know whether i should restore it because i'm scared it will loose all the data.

You are saying that you DID backup your iPad so there should be no worries at all. After you restore the iOS, you can restore from the backup - and sync with iTunes, if you are using iTunes - and you should be fine. If you see the iTunes logo and the USB cable on the screen, you are in recovery mode.
Read this for more information.
If you can't update or restore your iOS device - Apple
If you didn't backup your iPad, there is nothing that you can do about it now. You will lose everything when you restore. You can add you purchased content back to the device using the purchased tabs in all of the iStores or you can sync your content back to the iPad if you use iTunes.
No matter what, you have to restore if you want to be able to use your iPad again.

Raise up near to ear the sensor didn't work

Similar Messages

Maybe you are looking for