Raising custom error message in generic service initialize method of Pr&for

Dear all,
I am developing the HCM process form.
Is it possible to raise an error if any condition is not met in initialize method in generic service of HCM process & forms?
If possible could you please provide me the steps/process.
Thanks & Regards,
Krishna K

Change for a BADI more suited (not in the update of after-save process) like ME_PROCESS_PO_CUST (Method PROCESS_ITEM, CHECK).
ME_PURCHDOC_POSTED is too late.
Regards

Similar Messages

Raising Custom error message during posting

Hi All,
I have a requirement , while vendor/customer posting (Say in FB01 one will be Vendor line item and other will be GL line item). If the user enters the GL line item first then it should throw an error and should not allow the user to post the document.
Please help me how to achieve this.
Regards,
SK

Hi,
You can achieve this through Validation. Create a validation in GGB0
Create Validation
prerequisite: Transaction code = (give the transaction code that you want) FB01 and Line Item = 001
Check: Posting Key= Vendor posting key or Customer posting key
Message: Enter Message type as E
Message number: 001 (for eg)
Message text: Entry allowed only for Vendors/ customers or what ever text ou want to give you can enter.
For message number and text goto SE91 and select the message class and then change
Select the next free number and enter the text.
Regards,
B. Radhika.

Custom error message in mapping-Alert

We are using XSLT mapping and We are raising custom error message based upon some conditions i.e if vendor number is invalid or blank.If it doesn't meet the requirement,mapping will fail and it will throw error message as" IDoc XXXXXXXXX is having invalid vendor number".
My question is,we would like to send this custom error message to email receipients through RWB-AFW.
How do we capture this custom error message is alert category or alert rule?

SOLVED!!!!
UDF call to RFC-FM by passing payload dato in t it

Capturing custom error message from alert category

We are using XSLT mapping and We are raising custom error message based upon some conditions i.e if vendor number is invalid or blank.If it doesn't meet the requirement,mapping will fail and it will throw error message as" IDoc XXXXXXXXX is having invalid vendor number".
My question is,we would like to send this custom error message to email receipients through RWB-AFW.
How do we capture this custom error message is alert category or alert rule?

You can not unless u use BPM.
VJ

Custom error message for Back Button Error

I am using JDeveloper 9. I have tried to create a custom error message to handle a "Back button" press.
But the error message is usually ignored and the system's regular "Stale data" message appears. Is there a way to prevent the system's message from appearing and to raise a custom error message?

Do the following coding in your processRequest() of the Create or udpate page.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
// If isBackNavigationFired = false, we're here after a valid navigation
// (the user selected the Create button) and we should proceed
// normally and initialize a new employee.
if (!pageContext.isBackNavigationFired(false))
// We indicate that we are starting the create transaction (this
// is used to ensure correct Back button behavior). Note that you
// can assign whatever name you want to your transaction unit.
TransactionUnitHelper.startTransactionUnit(pageContext, "empCreateTxn");
// This test ensures that we don't try to create a new employee if
// we had a JVM failover, or if a recycled application module
// is activated after passivation. If these things happen, BC4J will
// be able to find the row that you created so the user can resume
// work.
if (!pageContext.isFormSubmission())
OAApplicationModule am = pageContext.getApplicationModule(webBean);
// Call your method to handle creating the new row.
am.invokeMethod("createEmployee", null);
else
if (!TransactionUnitHelper.isTransactionUnitInProgress(pageContext, "empCreateTxn", true))
// Get the purchase order number from the request.
String orderNumber = pageContext.getParameter("headerId");
MessageToken[] tokens = { new MessageToken("PO_NUMBER", orderNumber)};
OAException message = new OAException("ICX", "FWK_TBX_T_PO_UPDATE_CONFIRM", tokens,
OAException.CONFIRMATION, null);
// We got here through some use of the browser "Back" button, so we
// want to display a state loss error and disallow access to the page.
// If this were a real application, we would probably display a more
// context-specific message telling the user they can't use the browser
// "Back" button on the "Create" page. Instead, we wanted to illustrate
// how to display the Applications standard NAVIGATION_ERROR message.
OADialogPage dialogPage = new OADialogPage(message);
pageContext.redirectToDialogPage(dialogPage);
} // end processRequest()
--Prasanna

LSO_CHECK_BOOKING custom error messages are not displayed

Hi,
Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
Is there a way for me to display my custom error message instead of the predefined SAP message?
Thanks a lot.
Cheers,
James

Hi James,
You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
Learning Portal:
The framework of the existing design of the Learning Portal does not
allow customer specific error messages to be displayed in the portal.
Only a generic message will be displayed when prebooking in the learning
portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
application does not expect to raise an exception from the BADI. If the
BADI processing is assumed to be unsuccessful, the messages filled by
the BADI will be ignored and a general error message will be displayed
in the portal.
So this is basically a design limitation.
Administrator Portal:
Have you tried e.g. the following notes?
SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
Regards,
Agnes

Component level display of the Custom Error Message in 11g

Iam using custom error handler that extends the default DCErrorHandlerImpl class to handle the Custom exceptions thrown from the service layer, and able to see the exception displayed in the ADF UI in a popup window.
How can we do Customization in order to display the Custom error message inline with a component (i.e. associated with a specific UI component with the arrow mark look and feel ) instead of the global level message displayed as a pop up window on the ADF UI page? Please suggest.
Thanks,
Kayal.
Edited by: user11217416 on Feb 15, 2012 6:07 AM
Edited by: user11217416 on Feb 15, 2012 6:14 AM

Hi,
Try as follows
final static int MSG_FATAL = 1;
final static int MSG_ERROR = 2;
final static int MSG_WARN = 3;
final static int MSG_INFO = 4;
      public static void showMsgForRelevantComponentAll(int iSeverity, String sMsg, UIComponent uIComponent) {
          FacesMessage msg = null;
          switch (iSeverity) {
          case MSG_FATAL:
              msg = new FacesMessage(FacesMessage.SEVERITY_FATAL, null, sMsg);
              break;
          case MSG_ERROR:
              msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, sMsg);
              break;
          case MSG_WARN:
              msg = new FacesMessage(FacesMessage.SEVERITY_WARN, null, sMsg);
              break;
          case MSG_INFO:
          default:
              msg = new FacesMessage(FacesMessage.SEVERITY_INFO, null, sMsg);
          FacesContext facesContext = FacesContext.getCurrentInstance();
          facesContext.addMessage(uIComponent.getClientId(facesContext), msg);
      }

Catch datetime exception and custom error message in SSRS

I currently working on create report by using SSRS. I have 2 parameters: [Start date] and [End date] to filter data from database and show it on report. I want to validate 2 datetime parameter as describe above. Please tell me a solution to do this.
For example:
When user type the text like: 4/15/2014mmm => System validation thrown a message: [The From Date not correct type]
But in my case, I want to receive a custom error message by myself.(Look like: [Date Invalid!])

Hi Brain,
According to your description, you have a report with two parameters for user to input. Now you want to validate these two parameters and display custom error message when the date is invalid. Right?
In Reporting Service, it doesn’t provide any interference for us to modify the system error message (the text in grey color). That means we can’t modify the system message when error occurs. However we can create a textbox in this report, use custom code
and expression to display the custom error message. But this all based on the report is successfully running. So if error occurs during report processing, all the custom code and expression will not work. In this scenario, we find a workaround for you. We
use custom code to judge if the date is valid, if the users type an invalid date, we return a default value to make sure this report can successfully run. Then we use expression to control the visibility of tablix in this report and create a textbox to show
the custom error message. Your case has been tested in our local environment. Here are steps and screenshots for your reference:
Go to Report Properties. Put the code below into custom code:
Public Shared a As Integer=0
Public Shared Function IsDate(d1 As String,d2 As String) as Integer
        Try
           FormatDateTime(d1)
           FormatDateTime(d2)
        Catch ex As Exception
                   a=1
        End Try
return a
End Function
Create two parameters. One is StartDate, the other is EndDate. Set the data type of these two parameters Text.
Create a filter for StartDate, put the expression below into Value:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,CDate(IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,Parameters!StartDate.Value,"1/1/2012")),CDate("1/1/2012"))
Create a filter for EndDate, put the expression below into Value:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,CDate(IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,Parameters!EndDate.Value,"1/1/2013")),CDate("1/1/2013"))
Ps: In step3 and step4, the date(“1/1/2012”, “1/1/2013”) in the expression are the default we set to make sure the report can successfully process. You can set any date existing in your dataset.
Use the expression below to set the visibility of the tablix:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,false,true)
Create a textbox, put the expression below into it:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,"","Date invalid")
Save and preview. It looks like below:
Reference:
SSRS Calendar and Date Restriction
Errors and Events Reference (Reporting Services)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Customer error message in sales order on save

Hi Friends,
as per requirement i have to raise the error message and system should enable the field to change values. This should happen when condition is not met on Saving of Sales order.
For this, i have used the user exit USEREXIT_SAVE_DOCUMENT_PREPARE. But the problem is system throwing error message and all r in display mode only. as per my requirement system should allow to change the error value field.
i have verified many posting in this SDN, but nothing is working out.
Please guide me, how to raise the error message and system should enable that filed.
My doubt is where should i raise the error message in sales order (MV45AFZZ)??? if any badi to raise the error message also fine for me. I tried many ways like... message with display like..... and set / get parameters and badis.... but not able to find the correct solution.
Thanks in Advance.
Bala

Hi
You need to use check for enahcement spot, which will be help to you.
Bcz you are throwing custom error message in the standard transaction, once the error is display, you could not able to change the values. your prob can be solved by using the enhancement sport.
This is include name (Include:MV45AF0B_BELEG_SICHERN).
In the above include, you need to create a enhancement spot after this spot (ENHANCEMENT 16 OI0_COMMON_SAPMV45A.)
write your custom code and while displaying an error message. set flag = 'x', then use below code. It will display error message once you press ENTER, you will get the sale order in change mode, you change the values.
IF flag = 'X'.
          fcode = fcode_gleiche_seite.
          perform fcode_bearbeiten.
          ch_subrc = 4.
          exit.
        ENDIF.

Custom error messages in scheduler_job_run_detail

Is it possible for a job to send custom error# and customer error message to error# and additional_info in schedulerjob_run_details table

Never mind, I have figured it out. All one needs to do is RAISE application error and pass erro# and a custom msg.

Customized error message for MethodValidator

Hi,
I coded a validation method and attached it to an entity attribute through the MethodValidator of the Entity Object validation tab.
When I test it in the application module tester, it works fine. Just the error message produce by BC4J is too generic, like "JBO-27013: Attribute set validation method validateIsSoldTo failed for attribute IsSoldTo in Customer".
Is there anyway that I can provide a more meaningful customized error message?
I am using JDev 3.2.2 for a JSP application using Data Tag.
Thanks!
Dawson

short of coding the dml procs yourself and trapping those error messages that way, i don't think we offer you a good way currently to trap and translate error messages coming out of our automatic DML processes. i've just logged the enhancement request to facilitate this, but for now i'm pretty sure you'd have to code that dml and trap your errs yourself.
regards,
raj

Reg.Customized error messages

Hi All,
How to get customized error messages in MONI in Error pipe.
Is there any way to do?
Thanks,
Regards,
Naresh

Hi
You can get custom error messages using Fault message Type.
Even more customerization can be achived using ABAP
Refer following
Fault Message Types - A Demo (Part 1)
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
The specified item was not found.
Interesting ABAP tables in XI Part I
Error handling framework
Error Handling Framework XI(Out-of the box)-Episode 1
Error Handling Framework XI(Out-of the box)-Episode 2
Thanks
Gaurav

Custom error message in SAP application log

Is there a way to add a custom error message to the SAP application log without passing the message variables MSGV1, MSGV2, MSGV3, MSGV4 and the Message class and number.
We want to pass a custom message from the BAPIRET2-MESSAGE without giving it a Message class and number. The reason for this is that we are using class based exceptions instead of the traditional message class with errors. When we catch the class based exception, we take the error text of the exception and put in in the BAPIRET2-message and set the BAPIRET2-TYPE as 'E'. Now we want to add this to the SAP application log.
The call to 'BAL_LOG_MSG_ADD' takes a structure BAL_S_MSG which is just like BAPIRET2. However this function builds the entry to the application log use the message variables MSGV1, MSGV2, MSGV3, MSGV4. There is no provision to pass in the BAPIRET2 message.
Add message to application log
CALL FUNCTION 'BAL_LOG_MSG_ADD'
 EXPORTING
 i_log_handle = app_log_handle
 i_s_msg = log_message
Thanks,
Jay

Hi Jay,
Did you see BAL_LOG_EXCEPTION_ADD?
This FM is represented by the structure BAL_S_EXC. This can have various versions as described below:
Data of BAL_S_EXC Structure / Use
EXCEPTION / Exception class from which an exception text
 is added to the log. This field must be filled.
MSGTY / Message type (MSGTY) of a T100 message.
 This field must also be filled for exceptions.
PROBCLASS,
DETLEVEL,
ALSORT, TIME_STMP / Message or exception attributes, such as
 problem class (PROBCLASS, for
 example, "very important"), level of detail
 (DETLEVEL, from 1 to 9), sort criterion
 (ALSORT, unrestricted) and timestamp
 (TIME_STMP). These fields can be displayed
 in the log (except TIME_STMP).
MSG_COUNT / This attribute is not used for exceptions.
Follow the link below for more details:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/d6/5d7f38f52f923ae10000009b38f8cf/frameset.htm">SAP Help DOc</a>
Hope this helps.
Thanks
Sanjeev

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

How to create Custom error message in SharePoint 2013

Hi,
I have created one document library.On uploading the same file SharePoint throws error as"server error.The same file exit".
But my requirement is not to show the SharePoint default message.I wanted to create custom message and show the pop up for the same file upload.
Is there any way to create any custom error page or can I manipulate SharePoint default error page?
Any help?
Thank you

Hi,
You can create an event receiver to set the validation error messages. One such post to redirect the custom error page is as follows
https://social.msdn.microsoft.com/Forums/office/en-US/2bc851f6-e04b-4550-b87f-9b874a290482/sharepoint-event-receivers-and-custom-error-messages?forum=sharepointdevelopmentlegacy
Create custom error page for SharePoint event receiver
Please mark it answered, if your problem resolved or helpful.

Raising custom error message in generic service initialize method of Pr&for

Similar Messages

Maybe you are looking for