Rajouter le nombre d'implulsion sur l'exemple "Multiple Counters with Phase Shifts.llb"fournit par NI
Bonjour,
J'utilise une carte PCI6601 NI DAQ traditionnel avec LV6 et je génère 4 signaux à l'aide de "Multiple Counters with Phase Shifts.llb"fournit par NI. Cela marche très bien néanmoins je voudrais pouvoir rajouter le nombre d'impulsion. Ce nombre serait le même pour les 4 signaux.
Merci d'avance
Monsieur,
Dans cet exemple vous ne pouvez fixer le nombre d'impulsion puisque c'est une generation d'impulsion en continue. Vous devez donc modifier cet exemple afin que le compteur 0 ne genere pas en continue notamment en prenant comme exemple le VI finite pulse train qui utilise un compteur comme gating du compteur qui genere.
France.support
Similar Messages
-
Compter le nombre de pression sur un poussoir
bonjour,
je cherche à réalisé un vi qui me permetterai de compter le nombre de pression sur un bouton. Mais mon souci est que je dois utiliser un bouton à basculment et non sur implusion.
pouvez vous m'aider?
codialement
manuVoici un exemple (l'action mécanique est bien switch when pressed? la première?)
Rodéric L
Certified LabVIEW Architect
Pièces jointes :
Sans titre.JPG 14 KB -
Hellooo Apple Community!
I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
Thankyou thankyou thankyou!
Natalie.I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode. Both times it indicated a failed read test on the HDD. The last two tests also failed. I forget what those tests were called.
I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides. -
I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw
There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton -
Hi,
Im unable to open the RPD online getting following error.
Note: Im not done any changes. Its works good till yesterday EOD.
Error:
[NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM.
[NQSError:37001] could not connect to the oracle BI server instance..
Kindly help me to fix this issue.Hi,
Could you access the answer side.
Could you see the reports.
Do one thing, take a back up of NQS config file from <Oracle Location>\instance\instance1\config\obiserver folder\nqsconfig.ini file.
Copy nqs config file if you have already have a back up.
Restart the services and try once.
http://mkashu.blogspot.com
Regards,
VG -
Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?
Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
HT1212 my phone is disabled and I am not sure if it is synced with itunes
My phone is disabled and I am not sure if it is synced with intunes
What do you mean you're not sure? How can you not be sure? Do you sync it with itunes or not?
-
TS3212 Having problems downloading. OS is LINEX and I'm not sure how to load itunes with it.
Having problems downloading. OS is LINEX and I'm not sure how to load itunes with it.
Agreed. No native linux support. The only ways you could run iTunes with a primary linux system would be to a) dual boot, b) virtualize Windows with VirtualBox, VMware, etc., or c) attempt to run iTunes in Wine (which doesn't usually work very well). Dual boot would give you the benefit of complete support and usage of hardware and software, but virtualizing is a bit more convenient, since you would not have to reboot your linux host.
-
I am not sure what is going on with my ipod but my ipod will not even let me open my wifi or apps. I don't know why can anyone help?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
"Quick Time Player cannot be opened because of a problem" Futher noted - Check with developer to make sure Quick Time player works with this version of Mac OS X. The player had been working fine on my iMac 24, even after upgrading to Lion. Now, nothing but this message. This involves Quick TIme Player version 10.0. Could upgrading to the 'Pro' version be worthwhile? Can't find anything on support that comes close to answering this perplexing situation.
Thanks,QuickTime Player 10.0, if that's what you have, is indeed too old for Lion which should have QuickTime Player 10.1. Check your system to see if perhaps you have two copies of QuickTime Player, something quite possible if you moved or renamed QuickTime Player before upgrading.
Hope this helps. -
Mon iphone affiche la prise et itunes sur l' ecran ? je restaure mais il finit toujours par iphone non retauré et erreur 21 . COMMENT Résoudre ce problème Je pense à un problème de connection avec la batterie ?
Illustrator CC uses the Pantone Plus series, there is no CMYK definition for the spot colours in these series.
The CMYK conversion is now based on the CMYK profile in your Color Settings.
This is a good thing, since most of the Pantone colours cannot be accurately reproduced in CMYK, colour management provides a way to simulate the spot colours as close as possible for your combination of ink, paper and press.
The CMYK values that were previously given by Pantone were just one way of simulating the spot colours and would give different results when another ink, paper, press combination was used.
Sometimes the CMYK values from Pantone were completely off and you give a perfect example with the Pantone 1797 U colour.
Printing that ink on uncoated stock would never give you such a bright saturated red as the Pantone provided CMYK values would suggest
If you want to have a better preview of the colour, use the Overprint Preview option, that comes closer to the final printed result. The Overprint preview in CC and CS versions give s you an almost identical preview (almost because the Lab values differ slightly).
There are ways to use the old libraries, but why should you if Pantone itself stopped giving CMYK numbers? -
I want to buy the camera connectivity kit for my iPad 3 but not sure if it will work with my Sony dsc w35 camera can anybody help.
That camera does not have an SD card. It uses Sony's Memory Stick™ DUO Media.
The camera does provide for USB connection, however, some cameras require too much USB power from the iPad. Suggest you take your iPad to a camera store and ask to test it with your iPad.
Cheers, Tom -
Hello all
I had my damaged unlocked iPhone 4 replaced by apple with a refirb model and am pretty sure they've issued me with a locked phone.
Has anyone else had this problem?
Is Apple aware that they are refirbing but not unlocking phones?
Cheers
TyIt is entirely possible that the human you spoke with at Apple simply made a mistake. You do realize that humans make mistakes, correct?
Take the device back to the store along with any documents you have stating it is or is supposed to be unlocked and let them clear it up.
This all assumes the device was unlocked by the carrier and not some shady website or local electronics store. -
Répartition en nombre d'image sur une page
Bonjour,
Photographe, je crée des livres albums de mes mariages. je fais des glisser-déposer de lot d'image de Lightroom sur Indesign, c'est super. J'ai remarqué que si on glise une série, d'images avec Maj + cmd, je peux créer des mises en pages de series de 9 images. est ce que quelqu'un pourrais me dire comment modifier pour par exemple crée une page de 30 images.
Merci
PhilippeLa touche fléchée vers la droite augmente le nombre de colonnes, celle vers le haut augmente le nombre de lignes. On peut aussi utiliser le script « Imagecatalog » se trouvant dans le menu Fenêtre > Utilitaires > Scripts (CS5) Fenêtre > Automatisation > Scripts (CS4 et CS3). Il faut ensuite ouvrir le dossier Application > Samples.
P.-S : il y a peu d'utilisateurs francophones ici, et d'excellents forums en français ! -
I have an iphone 4 which is currently synced with a non apple laptop and I wish to sync it with my new imac. I have just backed the phone up on my laptop but am not sure what I need to do now. I do not want to loose any contacts, emails or photos from my phone when I change sync computers. Can anyone assist with a step by step guide as to how to achieve this oucome? Thanks in advance.
Have you read this?
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
Switch 101: Migrate your Windows files or system to your Mac
http://support.apple.com/kb/HT2518
Maybe you are looking for
-
Lobs are often troublesome . I have to fetch the concatenated result of few long varchar columns(all of them are of over 3888 bytes) over a dblink from my staging schema . I have made a procedure to do this . Similar to create or replace function lo
-
List / database currency in FAGLFLEXT reporting (FGI0)
Hi everyone We have a number of New GL reports that can be run under transaction FGI0. However, they all have the same problem, that when displaying the reports as "Graphical report output" the users can go in under Setting -> Currency and enter a cu
-
Custom Process Type - Creating the variant screen
My custom process type's logic is rather simple: run parts of the process chain only if it is the first day of the month, other parts only if it the last day of the month. I created a new custom process type (ABAP OO Class), but I am now struggling w
-
DB level triggers to log transaction ...
Hi friends, I have a ORACLE 10g DB. I want to track all the transactions made to the database. It can be either insert, Update, Delete or call for a procedure or function or package, or select statement. I want to log all the transaction to a text fi
-
Hi I have this structure of the model Z_Bw_Exec_Query_Input E_Datacol E_Result I_Params W3Query att:name