Ralink bluetooth adapter and wifi driver missing for HP ENVY 15-j101ex Notebook PC (ENERGY STAR)

hello theres a problem connecting my laptop with any wifi networks for a long time now. the problem comes and goes. i cant connect it with any available networks or cant detect them at times. i would like to re-install the ralink bluetooth adapter and wifi driver as i had uninstalled them. where can i get it? please help me out. its been missing for weeks now. also i cant transfer or receive any files because the ralink bluetooth adapter is missing. kindly reply asap. thank you so much.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 15-j101ex Notebook and issues with the Wireless drivers. Here is a link to your driver page. Here is a link for troubleshooting the Wireless connection. I would use the section on The Windows 8 Network and Internet Troubleshooter. Here is a link that will show you how to connect a Bluetooth device to your Notebook. Hope this helps you connect. Thanks.

Similar Messages

My wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the photo

my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?

my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?

Nano 6th generation I attached the motorola D650 bluetooth adapter and it says unsupported device... Any suggestions?

Nano 6th generation and i connected the motorola D650 bluetooth adapter and it says unsupported device? Any suggestions, this should work as Apple told me it would and instruction manual for headphones specifically mentioned Ipod.
Thanks

I've heard that there are some Ipod adapters out that will work with this trick but it would be nice if anyone knew a way to make this adapter work. I think it is a popular trick since the adapter from oakley that does work is now on back order.

Conflict Between Bluetooth Mouse and WIFI?

I Bought the new MBPR X72 and a Iogitech Bluetooth Mouse.When i download something by Wifi,My mouse can't work well.I search the answer on Google,some people said that there is a conflict between Bluetooth mouse and Wifi.Because they are both use the 2.4G HZ.So anyone can help me ??

If you are on your home network, you could set the router and MBPr to use only the 5 GHz band if you are using the n-protocol WiFi. That would mean logging intothe router and changing band usage settings. The MBPr would follow what it sees as the wireless signal.

[svn] 4235: Fix for - Links and type information missing for air.update. event events in @event listings

Revision: 4235
Author: [email protected]
Date: 2008-12-04 13:02:39 -0800 (Thu, 04 Dec 2008)
Log Message:
Fix for - Links and type information missing for air.update.event events in @event listings
Also adding support for multiple @event for a method.
QE Notes: None
Doc Notes: None
Bugs: SDK-18319
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18319
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Hi All,
I have sorted out the problem and this is fixed now.
Regards,
Ajay Kunde

Usb driver for HP ENVY 15-3040nr Notebook PC for win 7

Hi,
Where can i download thge drivers for the usb for HP ENVY 15-3040nr Notebook PC for win 7.
All 3 ports are acting up, 2 are just not recognising devices.
Is there a way to replace the hardware if needed?
Thanks in advance,

You can find all the drivers here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
also
Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
If this dosnt help then refer:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01893385
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Can't connect to bluetooth device and wifi really por

Hi,
I bought recently a Pavilion 15-p036tx and I can't connect to my bluetooth device as logitech audio adapter, toshiba bluetooth mose and phone HTC.
I noticed as well that the wifi connection is realy por only 1strip.
I have a old HP Pvilion I bought in 2007 which is connecting to my bluetooth devices and the wifi is at full bandwith perfectly.
It's realy seams to be a driver issue. On the HP support donwload page the is too many drives. Which one should I use?
Nicolas

@NicolasBilly ,
Hello and thank you for posting on the HP support forums. Here is a link that you may find useful.
HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)
Here is another one may help.
HP PCs - Using Bluetooth Devices (Windows 8)
Let me know if you need any more help.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

IWAY Siebel Rx Adapter: Location info is missing for the req

Hi,
We are connecting to Siebel using IWAY siebel Adapter. The deployment of IWAY siebel adapter is successful.
We have configured receiver communication channel in PI to send request to siebel. The message fails in Adapter framewrok and the following message is displayed in Message Display too -> audit log.
<i><b>Delivery of the message to the application using connection AFW failed, due to: IWAY AFJCA SAPXI cannot send the message: Location info is missing for the request.</b></i>
Regards,
Siva

Dear Siva,
Check whether the all the required JAR files related to siebel in the library of the IWay installation.
This will help you to resolve
Check this link on the service marketplace for more information on available 3rd Party Adapters for XI:
https://websmp104.sap-ag.de/~sapidb/011000358700008673832004E/index.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41
Regards
Agasthuri Doss

Bluetooth Adapter and Headphones Woes!! It was Better on OS 2.2.1

I am hoping someone can help me with my bluetooth scenario. I connect my iPhone to the car stereo via its headphone jack and also to my Jabra SP700 bluetooth device. I cruise listening to the iPod feature of my iPhone and when a call comes in, the music stops and the bluetooth kicks in for the call. I get sound and microphone through the bluetooth. When I hang up, the bluetooth stops emitting sound and the iPod resumes music play over headphones and I am HAPPY!
With the OS 3.0, that appears to have gone away -- my happiness that is! I have found at least 2 undesirable features:
1. When I receive a phone call bluetooth kicks in and I can talk fine. However, when I hang up, the music doesn't resume anymore. I have to unlock the phone and hit play again (or double 'home' click) -- BUT now the music plays over my bluetooth headset instead of the headphones like it was before the call. I then have to fiddle with it to return it to 'headphones'. This seems less user friendly than it was before OS 3.0.
2. If I try to make a call while music is playing, it tries to handle the call via the headphones, but nothing comes out. The bluetooth does not kick in and I can't hear anything. I again have to change the audio option manually once it actually starts ringing. When the call is over and I hit play on the iPod again (yes it does not resume playing like it used to), it starts playing music over the bluetooth adapter -- Again, not what I want.
I have looked at the settings and I can't find anything to help me out here. I would like an option that lets me state what output to play iPod out of and what channel to interact the phone over. That way I could always have music from headphones and telephony via bluetooth.
I realize that stereo bluetooth is a cool new feature, but I would just like the option of it working like it did under OS 2.2.1.
Anyone have any suggestions? Can I easily revert to the old OS?
Thanks,
Blaylock

I'm having a similar issue - only iPhone is connected directly into my iPod-enabled car stereo (through a USB connection to back of stereo/standard iPhone connector cable into iPhone; installed by 3rd party vendor.)
If I'm listening to iPhone music through speakers (whether from a playlist/iPod selection, streaming Pandora, etc.) and turn on Jabra SP700 device, music is diverted to play through the Jabra speaker instead. This means I can only have the Jabra on when I know I'm going to make a call (I'll temporarily switch car stereo to radio, which doesn't conflict), but it also means I can't use it to intercept incoming calls without taking eyes off of the road, ugh.
I'm going to try to re-pair the devices later this afternoon - have already deleted my existing JabraSP700 profile on the iPhone - & will try re-pairing the devices later this afternoon. But are there other configuration changes I need to make to either the iPhone or the Jabra if that doesn't work?

Continual reboot and device driver missing

Hi, I have a t400 installed with both win7 and ubuntu 11.04. The system suffers from continual reboot, basically when I shutdown the machine, it automatically and forcibly get rebooted.
I have followed some instructions on the web, and there is a device driver missing, which is PCI simple communication controller. I have tried download AMT package, which does not work for me. It gets stucked in a terminal saying that I need insert TN33, which I dont have. My t400 type is 7417. Any comments are appreciated.

hey tristartom,
continuous reboot occured after installing ubuntu yes ? could you remove ubuntu and have your unit on a mono-boot with windows and see if the same error occurs.
if it doesn't happen, then i suggest heading to Ubuntu forums or the Linux thread in this forum and check with other linux users if they have experience this same issue as you.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

TS3406 i have an apple 4s. had no probems until lately when bluetooth capablility and wifi continue to drop off and then come back, then drop off again. verizon guy says, of course, i need a new phone, because by phone can't handle ios7,

iphone 4s, updated to ios7. now dropping bluetooth and wifi all the time. can you help?

Hey whitnep!
I have two articles that I believe will help you troubleshoot these issues with your iPhone:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Satellite L350-277 - Update of new BIOS and Wifi driver

TEMPRO has given me 2 new drivers but neither has instructions.
BIOS installation used to be an operation involving copying the driver to a disc and then changing the boot-up order to start with that disc.
However I think the new BIOS drivers are installed with Windows running - as a normal program. Anyone know for sure ?
I assume the wifi driver is a normal install, with wifi switched on or off ?

Hi
Just one question;
Is a WLan driver update and BIOS update necessary?
I mean; do you have any problems with your notebook where such update would be required?
You should not update this if everything is OK. in most case the Tempro notifies you about drivers and tools which are uploaded to the driver page but this is not a recommendation for an update you know what I mean???
I follow always this tip; never change a running system.

AV digital adapter and WIFI

I bought the apple av digital adapter and it works well, the mirroring working fine with the ipad 2, however when I connect the adapter the wifi connection freeze and finaly get lost, and I can't reconnect. When I disconnect the adapter , the wifi works fine. I tested it with few hdmi cables, different TV, and different routers.
With iPhone 4 there is no wifi problem.
What can cause it?
iPad 2 Wi-Fi, iOS 5.0.1

Dsaamgel24-
The mention of VGA was to give you something to look for. It is not likely that an HDMI port would have that problem!
For purposes of troubleshooting, you might try swapping the HDMI ports. If both ports work the same with both the iPad and the Blu-Ray, then there is probably nothing you can do to make the iPad work with that TV's HDMI.
Does that TV have any other video inputs? Apple also has adapters for VGA, Composite and Component Video. They will not have as high a video quality, but may work.
Fred

I've just hooked my 20" iMac up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and works well, EXCEPT for the green tinge (or hue) that is showing up on my TV. Any suggestions or ideas?

I've just hooked my 20" iMac display up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and everything works well, EXCEPT for the green tinge (or hue) that is showing up. Everything else looks pretty good though..... The color that is on my iMac is still good, Its just green on the TV.
Anyone have suggestions or ideas?

Try opening the Display System Preferences, then click on the Color options in the Display preferences window that appeared on the Toshiba display. Click on the Calibrate button and follow the instructions for creating a custom ColorSync profile that will hopefully solve the green tinge issue. The Apple Display Calibrator Assistant software that launches when you click on the calibrate button will walk you through the process.Assuming that the green tinge is minor and that you don't have a more serious cable or hardware issue, I am hopeful the results will be worth it.

How do I get a Mini DisplayPort adapter and HDMI connection working for my Older MacBook Pro?

I bought a Belkin Mini DisplayPort adapter and attempted to hook it up on two different tvs using two different HDMI cords. I've always received a "no signal" message. I haven't even been able to get my desktop to appear. My display settings doesn't include a mirroring option and I only have the option to use my computer as a sound output. I've called apple support and I went to geek squad. Is it just impossible for older MacBooks?? I have Snow Leopard 10.6.8 and all of the forums I've read say that video should work at least. I switched out my adapter for a rocket fish one and still no luck. The geek squad employee couldn't get it to work on either adapters. Please Help!

I upgraded my OS to Mountain Lion and now it works perfectly. However, I'm getting random green and black splotches on my screen when I'm not using it with the TV.

Ralink bluetooth adapter and wifi driver missing for HP ENVY 15-j101ex Notebook PC (ENERGY STAR)

Similar Messages

Maybe you are looking for