RALINK Problem
Hi,
I have just gone onto my computer and the internet has stopped working
I have gone to the device manager and ckicked on the Ralink RT5390R 802.11BGN wifi adaptor link and it says nder the general info part
device status
this device cannot start (code10)
operation failed
can anybody help??
thanks
Mark
Hello,
Have you tried to remove the device to install the driver again?
What is the computer model you have and the operating system?
Thanks,
I work for HP! Please remember to provide and if this helped click ON
Similar Messages
-
Ralink RT5390R Windows 8.1 problem
The wifi adapter Ralink RT5390T can't connect to the wifi network, my other laptop connect without problem. The windows event viewer report the following problems (spanish): El adaptador de red con la dirección de hardware 9C-2A-70-1C-52-92 indicó una capacidad de fusión de paquetes sin indicar compatibilidad para una o varias capacidades de filtro de recepción de requisitos previos (IPv6 0x00000000). <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">- <System> <Provider Name="Tcpip" /> <EventID Qualifiers="32768">4291</EventID> <Level>3</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2015-07-11T18:36:28.586587700Z" /> <EventRecordID>907</EventRecordID> <Channel>System</Channel> <Computer>MiEquipo</Computer> <Security /> </System>- <EventData> <Data /> <Data>(MAC ADDRESS)</Data> <Data>IPv6</Data> <Data>0x00000000</Data> <Binary>000000000400300000000000C3100080000000000000000000000000000000000000000000000000</Binary> </EventData> </Event> El adaptador de red con la dirección de hardware 9C-2A-70-1C-52-92 indicó una capacidad de fusión de paquetes sin indicar compatibilidad para una o varias capacidades de filtro de recepción de requisitos previos (IPv4 0x00000000). <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">- <System> <Provider Name="Tcpip" /> <EventID Qualifiers="32768">4291</EventID> <Level>3</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2015-07-11T18:36:28.586587700Z" /> <EventRecordID>908</EventRecordID> <Channel>System</Channel> <Computer>MiEquipo</Computer> <Security /> </System>- <EventData> <Data /> <Data>(MAC ADDRESS)</Data> <Data>IPv4</Data> <Data>0x00000000</Data> <Binary>000000000400300000000000C3100080000000000000000000000000000000000000000000000000</Binary> </EventData> </Event> I have tried installing different versions of the driver, but not solution. I also changed the operating system from windows 8.1 to windows 7, and nothing, I am thinking that the adapter is bad. Could you tell me if there are someone with the same problem and if it have solution? Thanks.
Hi,
In regarding of the issue, we need more information.
Do you meaning that you can't open the Word 2013 file in NAS Synology through network?
Does only one Word file occur the issue?
Does the Other file encounter the issue (Such as Excel file ,TXT file, Images)?
Do you download the Word file to local and check if it can be opened or saved?
Do you get some error message or error code?
Please try the following steps to check they are helpful:
Create a new Word file and open it in local disk to make sure Word 2013 work fine in local.
Check the network connection.
Check the account permission and security settings.
If the issue still exists, please give me more information, and upload the event log to do further research.
Regards,
George Zhao
TechNet Community Support -
Terredo Tunneling adapter driver and Ralink PCI Adapter driver problem
Have HP A-I-O, running Windows 8 and getting errors ref. Terredo Tunneling Adapter driver and Ralink PCI Adapter driver problem. Occassionally lose internet or wireless mouse and kebouad. Troubleshooting reloaded drivers for both but did NOT resolve the problem.
Any ideas? Wouold Refresh work? If so, should I just load Windows 8.1?Sysherman, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Ralink RT5390R 802.11bgn Wi-Fi Adapter adapter is experiencing driver problems
Hello HP and Friends,
I no longer can connect to the internet via wi-fi. While trouble shooting (by connecting via ethernet) I get the following error:
The Ralink RT5390R 802.11bgn Wi-Fi Adapter adapter is experiencing driver- or hardware-related probl...
The computer is a HP Envy dv6t Quad Laptop, Intel Core 2.4GHz running Windows 8. (Purchased 12/2002)
Any assistance would be more than appreciated.
Yabs
This question was solved.
View Solution.Any of these will work:
Atheros 9485GN 802.11b/g/n 1×1 WiFi and 3012 Bluetooth 4.0 Combo Adapter 655795-001
Atheros WB225 802.11b/g/n 1×1 Bluetooth Combo Adapter 675794-001
Broadcom 4313GN 802.11b/g/n 1×1 WiFi and 20702 Bluetooth 4.0
Combo Adapter 657325-001
Intel Centrino Advanced-N 6230 WLAN module 670691-001
The Manual is incorrect in that the part number for the Centrino card is actually the Ralink card:
http://www.ebay.com/itm/GENUINE-HP-dv6-7000-dv6-7020us-Wireless-N-WIFI-Card-670691-001-RT5390-/18137...
The eBay link should be an exact replacement for yours. Here is the Service Manual:
Manual
See Page 52
If this is "the Answer" please click "Accept as Solution" to help others find it. -
How to run virtual pc machines in hyper - v ? &hyper -v problem in Ralink adapter
i have very important virtual machines created using virtual pc , how can i run it on hyper -v ?
also i run hyper -v only when disabling wifi from bios , has anyone solved the ralink 3290 issue ?Hi，
We need to move a Virtual PC vm to a hyper-v vm first.
I suggest that we refer to the following article to check the result.
http://blogs.msdn.com/b/skaufman/archive/2012/01/18/can-you-move-a-virtual-machine-from-virtualpc-to-hyper-v.aspx?Redirected=true
http://technet.microsoft.com/en-us/library/dd296684(v=ws.10).aspx
In addition,regarding your wireless issue,it is related to the ralink 3290 driver.
Let us know the driver version.
Please uninstall the old driver,and then download the following driver to test it:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?lang=en&cc=US&swItem...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=de&lc=de&dlc=de&softwareitem=ob-121882-1
Also,please refer the link before:
http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/Cannot-boot-if-HP-ENVY-Bios-Virtualization-enabled-for-Win8/td-p/2006815/page/6
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hope this helps.
Regards,
Kelvin Xu
TechNet Community Support -
Problem compiling the Ralink 5390 driver
I've tried what it says in here https://bbs.archlinux.org/viewtopic.php?id=117763 but then when I run make it gives me an error 2. This is the output:
make -C tools
make[1]: Entering directory `/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools'
/home/use/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools/bin2h
cp -f os/linux/Makefile.6 /home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/os/linux/Makefile
make -C /lib/modules/3.2.1-2-ARCH/build SUBDIRS=/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/os/linux modules
make: *** /lib/modules/3.2.1-2-ARCH/build: No such file or directory. Stop.
make: *** [LINUX] Error 2
[erdave@ghost-pc 2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO]$ make
make -C tools
make[1]: Entering directory `/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools'
/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools/bin2h
cp -f os/linux/Makefile.6 /home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/os/linux/Makefile
make -C /lib/modules/3.2.1-2-ARCH/build SUBDIRS=/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/os/linux modules
make: *** /lib/modules/3.2.1-2-ARCH/build: No such file or directory. Stop.
make: *** [LINUX] Error 2cause i ran lsmod and it seems that its using the rt2800 modules. the wireless does not show any network on range...
Last edited by ErSoul (2012-01-28 18:51:27) -
After performing the OS X 10.10.2 update, OpenGL applications, for example Starry Night Pro fail to run, there are numerous windows update/refresh problems (incomplete refresh, remnants of window/frame borders), and some applications, for example Google Chrome are unusable, as cursor motion in the application window causes the display to flash horizontal bars in the window.
I've tried a variety of things, including downloading the most current release of Xcode, turning on/off transparency in Accessibility, graphics switching, and a few other things, but the problem persists.
The App Store display behaves similarly. I am running a MacBook Pro.
This is the output from EtreCheck:
Problem description:
Screen/windows corruption
EtreCheck version: 2.1.8 (121)
Report generated March 11, 2015 at 10:26:15 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 36
Video Information: ℹ️
Intel HD Graphics 4000
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C1510) - Time since boot: 23:26:45
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.96 GB (146.71 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple iPod
Western Digital My Book 1 TB
EFI (disk3s1) <not mounted> : 210 MB
WDP1 (disk3s2) /Volumes/WDP1 : 333.40 GB (9.12 GB free)
WDP2 (disk3s3) /Volumes/WDP2 : 333.40 GB (2.55 GB free)
WDP3 (disk3s4) /Volumes/WDP3 : 332.79 GB (94.00 GB free)
Western Digital My Book 1140 2 TB
EFI (disk4s1) <not mounted> : 210 MB
2TB_1 (disk4s2) /Volumes/2TB_1 : 666.79 GB (31.36 GB free)
2TB_2 (disk4s3) /Volumes/2TB_2 : 666.79 GB (58.76 GB free)
2TB_3 (disk4s4) /Volumes/2TB_3 : 666.18 GB (70.41 GB free)
Logitech USB Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[loaded] com.parallels.virtualsound (1.0.36 36 - SDK 10.6) [Click for support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Click for support]
/Applications/Utilities/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.1) [Click for support]
/Library/Extensions
[loaded] com.epson.driver.EPSONProjectorUDAudio (1.40 - SDK 10.6) [Click for support]
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) [Click for support]
[loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) [Click for support]
[loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) [Click for support]
[not loaded] com.Ralink.driver.RT73 (1.1.6) [Click for support]
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d16) [Click for support]
[not loaded] com.cisco.nke.ipsec (2.0.1) [Click for support]
[not loaded] com.devguru.driver.DIFMCDFree (1.1.0) [Click for support]
[not loaded] com.devguru.driver.DIFMSerial (1.1.0) [Click for support]
[not loaded] com.fklt.driver (1.8.0) [Click for support]
[not loaded] com.novatelwireless.driver.3G (2.2.8) [Click for support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) [Click for support]
[not loaded] com.prolific.driver.PL2303 (2.0.0) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) [Click for support]
[not loaded] com.sbig.driver.SBIGUSBEDriver (4.70) [Click for support]
[not loaded] com.sbig.driver.SBIGUSBLoader (4.70.2) [Click for support]
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.6) [Click for support]
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.6) [Click for support]
[not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Click for support]
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) [Click for support]
[not loaded] org.emul.driver.EarthMate (1.0.0d1) [Click for support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
[not loaded] com.novatelwireless.driver.3GData (2.2.8) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
[not loaded] com.canon.MFManager.plist [Click for support]
[loaded] com.divx.dms.agent.plist [Click for support]
[loaded] com.divx.update.agent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.kodak.BonjourAgent.plist [Click for support]
[running] com.Logitech.Control Center.Daemon.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Click for support]
[running] com.wacom.wacomtablet.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.adobeupdatedaemon.plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.autodesk.backburner_manager.plist [Click for support]
[running] com.autodesk.backburner_server.plist [Click for support]
[loaded] com.autodesk.backburner_start.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.makerbot.conveyor.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Click for support]
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
[loaded] com.kodak.KODAK AiO Firmware Updater.plist [Click for support]
[loaded] com.kodak.KODAK AiO Software Updater.plist [Click for support]
[running] com.parallels.mobile.startgui.launchagent.plist [Click for support]
[loaded] com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
Google Drive Application (/Applications/Google Drive.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
Internet Plug-ins: ℹ️
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Google Earth Web Plug-in: Version: 6.0 [Click for support]
SlingPlayer: Version: Unknown [Click for support]
RealPlayer Plugin: Version: Unknown [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 6.0
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
AdobePDFViewer: Version: 9.5.5 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 40 Check version
User internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: Unknown [Click for support]
BrowserPlus_2.6.0: Version: 2.6.0 [Click for support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
fbplugin_1_0_1: Version: Unknown [Click for support]
Picasa: Version: 1.0 [Click for support]
Safari Extensions: ℹ️
Open in Internet Explorer
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
GoPro [Click for support]
Growl [Click for support]
Java [Click for support]
Logitech Control Center [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 748.96 GB Disk used: 602.25 GB
Destinations:
WDP3 [Local]
Total size: 332.79 GB
Total number of backups: 2
Oldest backup: 2013-04-03 12:26:32 +0000
Last backup: 2013-04-03 12:26:32 +0000
Size of backup disk: Too small
Backup size 332.79 GB < (Disk used 602.25 GB X 3)
STAR_TECH_EXT [Local]
Total size: 499.76 GB
Total number of backups: 2
Oldest backup: 2013-04-03 14:26:44 +0000
Last backup: 2013-04-03 14:26:44 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 602.25 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% Creative Cloud
0% firefox
0% fontd
0% AdobeUpdateDaemon
Top Processes by Memory: ℹ️
670 MB Safari
567 MB firefox
464 MB softwareupdated
395 MB mds_stores
309 MB WindowServer
Virtual Memory Information: ℹ️
1.43 GB Free RAM
7.87 GB Active RAM
6.40 GB Inactive RAM
1.47 GB Wired RAM
7.30 GB Page-ins
205 KB Page-outs
Diagnostics Information: ℹ️
Mar 11, 2015, 04:04:23 PM /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-160423_[redacted]. cpu_resource.diag [Click for details]
Mar 11, 2015, 02:54:29 PM /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-145429_[redacted]. cpu_resource.diag [Click for details]
Mar 11, 2015, 10:18:18 AM /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-101818_[redacted]. cpu_resource.diag [Click for details]
Mar 10, 2015, 10:55:10 PM Self test - passed
Mar 9, 2015, 03:21:58 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2015-03-09-032158_[redacted].cpu _resource.diag [Click for details]Here is the diagnostic script output:
Start time: 12:06:12 03/14/15
Revision: 1290
Model Identifier: MacBookPro9,1
System Version: OS X 10.10.2 (14C1510)
Kernel Version: Darwin 14.1.0
Time since boot: 3 days 13:11
UID: 502
Memory
BANK 0/DIMM0
Size: 8 GB
Speed: 1600 MHz
Status: OK
Manufacturer: 0x859B
BANK 1/DIMM0
Size: 8 GB
Speed: 1600 MHz
Status: OK
Manufacturer: 0x859B
USB
Hub (Belkin Corporation)
My Book 1140 (Western Digital Technologies, Inc.)
My Book (Western Digital Technologies, Inc.)
USB Receiver (Logitech Inc.)
USB Receiver (Logitech Inc.)
FileVault 2: On
Activity
CPU: user 13%, system 7%
CPU usage (%)
plugin-container (UID 502): 100.0
com.apple.WebKit (UID 502): 26.2
File opens (per sec)
AdobeUpdateDaem (UID 0) => /tmp/UUID_OUT (status 60): 6
Energy (lifetime)
WindowServer (UID 88): 7.44
com.apple.WebKit.WebContent (UID 502): 7.22
Energy (sampled)
plugin-container (UID 502): 99.13
com.apple.WebKit.WebContent (UID 502): 23.60
WindowServer (UID 88): 21.29
com.apple.WebKit.WebContent (UID 502): 13.16
Console (UID 502): 12.28
Memory (MB)
kernel_task (UID 0): 1327
Font issues: 1
Listeners
launchd: ftp
System caches/logs
3.6 GiB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
2015-02-19 com.apple.WebKit.WebContent crash
2015-02-20 Topaz Adjust 5 crash
2015-02-20 Topaz ReStyle crash
2015-02-20 com.apple.WebKit.WebContent crash x2
2015-02-21 com.apple.WebKit.WebContent crash x2
2015-02-25 com.apple.WebKit.WebContent crash
2015-03-04 system_profiler crash
2015-03-07 com.apple.WebKit.WebContent crash
2015-03-08 MPEG Streamclip hang x2
2015-03-08 com.apple.WebKit.WebContent crash
I/O errors
disk2s2: close: journal 0xffffff8049bb9c20, is invalid. aborting outstanding transactions 1
disk2s2: do_jnl_io: strategy err 0x6 1
disk2s3: close: journal 0xffffff8049bb9740, is invalid. aborting outstanding transactions 1
disk2s3: do_jnl_io: strategy err 0x6 1
disk2s4: close: journal 0xffffff8049bb9260, is invalid. aborting outstanding transactions 1
disk2s4: do_jnl_io: strategy err 0x6 1
disk3s2: do_jnl_io: strategy err 0x6 1
disk3s3: close: journal 0xffffff8049bb95a0, is invalid. aborting outstanding transactions 1
disk3s3: do_jnl_io: strategy err 0x6 1
disk3s4: close: journal 0xffffff8049bb9400, is invalid. aborting outstanding transactions 1
disk3s4: do_jnl_io: strategy err 0x6 1
disk4s3: close: journal 0xffffff8023522c20, is invalid. aborting outstanding transactions 1
disk4s3: do_jnl_io: strategy err 0x6 1
Volumes
disk1: /
disk5s3: /Volumes/WDP2
disk5s2: /Volumes/WDP1
disk5s4: /Volumes/WDP3
disk6s2: /Volumes/2TB_1
disk6s4: /Volumes/2TB_3
disk6s3: /Volumes/2TB_2
disk7s2: /Volumes/Starry Night Pro 7
HID errors: 3
Kernel log
Mar 8 17:08:19 firefox (map: 0xffffff80501790f0) triggered DYLD shared region unnest for map: 0xffffff80501790f0, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 8 17:08:59 firefox (map: 0xffffff8051e54870) triggered DYLD shared region unnest for map: 0xffffff8051e54870, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 9 08:11:09 jnl: disk2s4: close: journal 0xffffff8049bb9260, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk3s4: close: journal 0xffffff8049bb9400, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk2s3: close: journal 0xffffff8049bb9740, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk3s3: close: journal 0xffffff8049bb95a0, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk3s2: write_journal_header: error writing the journal header!
Mar 9 08:11:09 jnl: disk2s2: close: journal 0xffffff8049bb9c20, is invalid. aborting outstanding transactions
Mar 9 11:42:59 firefox (map: 0xffffff8031b5e780) triggered DYLD shared region unnest for map: 0xffffff8031b5e780, region 0x7fff89e00000->0x7fff8a000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 10 13:44:08 Limiting closed port RST response from 310 to 250 packets per second
Mar 10 23:03:12 firefox (map: 0xffffff802a954780) triggered DYLD shared region unnest for map: 0xffffff802a954780, region 0x7fff90000000->0x7fff90200000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 10 23:20:37 Limiting icmp unreach response from 302 to 250 packets per second
Mar 11 08:39:04 jnl: disk4s3: write_journal_header: error writing the journal header!
Mar 11 08:39:04 jnl: disk4s3: close: journal 0xffffff8023522c20, is invalid. aborting outstanding transactions
Mar 13 17:42:33 Limiting icmp unreach response from 428 to 250 packets per second
Mar 13 17:42:34 Limiting icmp unreach response from 433 to 250 packets per second
System log
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128828
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128829
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128830
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128831
Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
Mar 14 09:32:27 com.apple.sbd: SOSCCThisDeviceIsInCircle SOSCCThisDeviceIsInCircle!! 7
Mar 14 09:35:28 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Mar 14 09:47:41 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Installer" for over 1.00 seconds. Server has re-enabled them.
Mar 14 09:50:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Mar 14 09:52:55 WindowServer: WSGetSurfaceInWindow : Invalid surface 583724228 for window 1898
Mar 14 10:09:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.WebKit.Plugin.64" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:48 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:49 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.WebKit.Plugin.64" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:55 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:10:08 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:39:34 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=7 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29a29a pid=25591 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
Mar 14 10:39:34 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=8 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29a29a pid=25591 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
Mar 14 11:57:26 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=7 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29f29f pid=26088 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
Mar 14 11:57:26 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=8 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29f29f pid=26088 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
launchd log
Mar 8 17:07:46 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
Mar 8 17:08:18 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.341, service = com.garmin.renu.service, error = 119: Service is disabled
Mar 8 17:08:18 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.341, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 9 11:41:23 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
Mar 9 11:41:51 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.274, service = com.garmin.renu.service, error = 119: Service is disabled
Mar 9 11:41:51 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.274, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 10 22:48:48 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = imklaunchagent.14852, service = com.parallels.inputmethod.ParallelsIM.5712, error = 134: Service cannot load in requested session
Mar 10 22:48:58 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = WacomTabletDriv.14813, service = com.wacom.WacomTouchDriver.183780, error = 134: Service cannot load in requested session
Mar 10 22:48:59 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = prl_deskctl_age.14812, service = com.parallels.mobile.prl_deskctl_agent.220416.UUID, error = 134: Service cannot load in requested session
Mar 10 22:48:59 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = WacomTabletDriv.14813, service = com.wacom.TabletDriver.184064, error = 134: Service cannot load in requested session
Mar 10 22:56:21 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
Mar 10 22:59:02 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.340, service = com.garmin.renu.service, error = 119: Service is disabled
Mar 10 22:59:02 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.340, service = com.apple.photostream-agent, error = 119: Service is disabled
Loaded kernel extensions
com.Logitech.Control Center.HID Driver (3.6.0)
com.Logitech.Unifying.HID Driver (1.2.0)
com.epson.driver.EPSONProjectorUDAudio (1.40)
com.parallels.virtualsound (1.0.36 36)
System services loaded
com.adobe.adobeupdatedaemon
com.adobe.fpsaud
com.apple.watchdogd
com.autodesk.backburner_manager
com.autodesk.backburner_server
com.autodesk.backburner_start
com.google.keystone.daemon
com.makerbot.conveyor.daemon
com.oracle.java.Helper-Tool
com.oracle.java.JavaUpdateHelper
com.parallels.mobile.dispatcher.launchdaemon
com.parallels.mobile.kextloader.launchdaemon
org.macosforge.xquartz.privileged_startx
System services disabled
com.apple.security.FDERecoveryAgent
com.apple.mtmd
com.apple.mrt
com.apple.mtmfs
Login services loaded
com.GoPro.GoPro-Importer
com.Logitech.Control Center.Daemon
com.adobe.AAM.Scheduler-1.0
com.adobe.ARM.UUID
com.adobe.ARM.UUID
com.adobe.ARM.UUID
com.adobe.AdobeCreativeCloud
com.apple.Safari
- status: 78
com.apple.mrt.uiagent
com.citrixonline.GoToMeeting.G2MUpdate
com.divx.dms.agent
com.divx.update.agent
com.google.keystone.system.agent
com.kodak.BonjourAgent
com.kodak.KODAK AiO Firmware Updater
com.kodak.KODAK AiO Software Updater
com.oracle.java.Java-Updater
com.parallels.mobile.prl_deskctl_agent.launchagent
com.parallels.mobile.startgui.launchagent
com.valvesoftware.steamclean
com.wacom.wacomtablet
gldrvmond
org.macosforge.xquartz.startx
Global login items
/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
User login items
Google Drive
- /Applications/Google Drive.app
USB Display Agent
- /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
USB Display Agent
- /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
User crontab
#SqzS VERSION = 1.0.0
#SYMANTEC SCHEDULER CRON ENTRIES. THESE ENTRIES ARE AUTOMATICALLY GENERATED
#PLEASE DO NOT EDIT.
# Enc=1 Name="Update Virus Protection" EvType1=1 EvType2=0 Sched=2
0 8 * * 5 "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 1 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" " " "oapp" "aevt" "exAG" "-update LUdf"
# Enc=1 Name="My AntiVirus Scan Task" EvType1=2 EvType2=0 Sched=2
#0 9 * * 6 "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" -n 2 "/Library/Application Support/Symantec/AntiVirus/ScanNotification.app/Contents/scheduledScanner" " " "NVsi" "SCae" "path" '/' "kydo" "niCE" "long" 0
# Enc=1 Name="My Product Update Task" EvType1=1 EvType2=0 Sched=3
0 8 * * * "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 3 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" " " "oapp" "aevt" "exAG" "-update LUlu"
#SqzS END SYMANTEC CRON ENTRIES
Safari extensions
Open in Internet Explorer
- com.parallels.openinie
Widgets
TimeCalc
eCalc_Scientific
iCloud errors
bird 137
cloudd 18
storedownloadd 2
CallHistorySyncHelper 2
Continuity errors
lsuseractivityd 21
sharingd 11
Restricted files: 10847
Lockfiles: 19
High file counts
Desktop: 84
Accessibility
Keyboard Zoom: On
Scroll Zoom: On
Contents of /Library/LaunchAgents/com.canon.MFManager.plist
- mod date: May 22 05:23:32 2012
- checksum: 290641261
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.canon.MFManager</string>
<key>Program</key>
<string>/Applications/Canon Utilities/ImageBrowser EX/ExtApp/MFManager.app/Contents/MacOS/MFManager</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Canon Utilities/ImageBrowser EX/ExtApp/MFManager.app/Contents/MacOS/MFManager</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.divx.dms.agent.plist
- mod date: Nov 17 02:11:48 2014
- checksum: 637650676
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.divx.dms.agent</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/DivX/DivXMediaServer.app/Contents/MacOS/DivXMediaServer</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.divx.update.agent.plist
- mod date: May 19 16:24:29 2014
- checksum: 3867571547
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.divx.update.agent</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/DivX/DivXUpdate.app/Contents/MacOS/DivXUpdate</string>
<string>/silent</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>10800</integer>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.kodak.BonjourAgent.plist
- mod date: Sep 21 01:39:00 2012
- checksum: 2625351456
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kodak Version</key>
<string>7.1.6.10</string>
<key>Label</key>
<string>com.kodak.BonjourAgent</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Printers/Kodak/AiO_Printers/KodakAiOBonjourAgent.app/Contents/ MacOS/KodakAiOBonjourAgent</string>
</array>
<key>ServiceIPC</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
- mod date: Feb 15 11:22:20 2014
- checksum: 2857777334
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>71</integer>
<key>Minute</key>
<integer>54</integer>
<key>Weekday</key>
<integer>5</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.parallels.mobile.prl_deskctl_agent.launchagent.plist
- mod date: Feb 24 10:45:51 2015
- checksum: 1795713191
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnableTransactions</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/etc/com.parallels.mobile.prl_deskctl_agent.launchd</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.parallels.mobile.prl_deskctl_agent.launchagent</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
<string>LoginWindow</string>
</array>
<key>Program</key>
<string>/Applications/Parallels Access.app/Contents/MacOS/Parallels Access Agent.app/Contents/MacOS/prl_deskctl_agent</string>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.wacom.wacomtablet.plist
- mod date: Oct 11 17:37:46 2013
- checksum: 2972905917
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnvironmentVariables</key>
<dict>
<key>RUN_WITH_LAUNCHD</key>
<string>1</string>
</dict>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<true/>
</dict>
<key>Label</key>
<string>com.wacom.wacomtablet</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
<string>LoginWindow</string>
</array>
<key>Program</key>
<string>/Library/Application Support/Tablet/WacomTabletSpringboard</string>
<key>RunAtLoad</key>
<true/>
...and 4 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
- mod date: Aug 11 16:52:54 2014
- checksum: 2451978492
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>org.macosforge.xquartz.startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/launchd_startx</string>
<string>/opt/X11/bin/startx</string>
<string>--</string>
<string>/opt/X11/bin/Xquartz</string>
</array>
<key>Sockets</key>
<dict>
<key>org.macosforge.xquartz:0</key>
<dict>
<key>SecureSocketWithKey</key>
<string>DISPLAY</string>
</dict>
</dict>
<key>ServiceIPC</key>
<true/>
<key>EnableTransactions</key>
<true/>
...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.autodesk.backburner_manager.plist
- mod date: Feb 4 12:44:56 2013
- checksum: 3394451584
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/usr/discreet/backburner/nrapi.conf</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.autodesk.backburner_manager</string>
<key>ProgramArguments</key>
<array>
<string>/usr/discreet/backburner/backburnerManager</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.autodesk.backburner_server.plist
- mod date: Feb 4 12:44:56 2013
- checksum: 2405015914
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/usr/discreet/backburner/nrapi.conf</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.autodesk.backburner_server</string>
<key>ProgramArguments</key>
<array>
<string>/usr/discreet/backburner/backburnerServer</string>
</array>
<key>Nice</key>
<integer>18</integer>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.autodesk.backburner_start.plist
- mod date: Feb 4 12:44:56 2013
- checksum: 597826117
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>RunAtLoad</key>
<true/>
<key>Label</key>
<string>com.autodesk.backburner_start</string>
<key>ProgramArguments</key>
<array>
<string>/usr/discreet/backburner/backburner</string>
<string>boot</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.makerbot.conveyor.plist
- mod date: Dec 2 11:47:26 2013
- checksum: 147573995
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.makerbot.conveyor.daemon</string>
<key>WorkingDirectory</key>
<string>/Library/MakerBot</string>
<key>ProgramArguments</key>
<array>
<string>/Library/MakerBot/conveyor-svc</string>
<string>--config_file</string>
<string>/Library/MakerBot/conveyor.conf</string>
</array>
<key>KeepAlive</key>
<true/>
<key>EnvironmentVariables</key>
<dict/>
<key>RunAtLoad</key>
<true/>
<key>UserName</key>
<string>_conveyor</string>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.parallels.mobile.dispatcher.launchdaemon.plist
- mod date: Feb 24 10:45:50 2015
- checksum: 1994226602
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ExitTimeOut</key>
<integer>150</integer>
<key>Label</key>
<string>com.parallels.mobile.dispatcher.launchdaemon</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Parallels Access.app/Contents/MacOS/Parallels Access Dispatcher Service.app/Contents/MacOS/prl_pm_service</string>
<string>-e</string>
<string>--logfile</string>
<string>/var/log/prl_disp_service_server.log</string>
<string>--pidfile</string>
<string>/var/run/prl_pm_service.pid</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.parallels.mobile.kextloader.launchdaemon.plist
- mod date: Feb 24 10:45:51 2015
- checksum: 3938648138
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ExitTimeOut</key>
<integer>150</integer>
<key>Label</key>
<string>com.parallels.mobile.kextloader.launchdaemon</string>
<key>ProgramArguments</key>
<array>
<string>/sbin/kextload</string>
<string>/Applications/Parallels Access.app/Contents/Library/Extensions/10.9/prl_virtual_sound.kext</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /private/etc/ssh_config
- mod date: Nov 19 19:03:16 2012
- checksum: 1281775184
Host *
SendEnv LANG LC_*
Host *
XAuthLocation /opt/X11/bin/xauth
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Jan 20 19:45:18 2011
- checksum: 408149527
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Jan 29 16:03:43 2010
- checksum: 2544798274
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Sep 11 18:20:35 2011
- checksum: 2170691092
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader 9/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Oct 19 12:47:52 2009
- checksum: 10744905
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
- mod date: Jan 30 08:36:08 2015
- checksum: 1189540302
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.FolderActions.folders</string>
<key>Program</key>
<string>/usr/bin/osascript</string>
<key>ProgramArguments</key>
<array>
<string>osascript</string>
<string>-e</string>
<string>tell application "Folder Actions Dispatcher" to tick</string>
</array>
<key>WatchPaths</key>
<array/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
- mod date: Dec 18 09:24:48 2008
- checksum: 3493273791
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.Safari</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
<string>--sync</string>
<string>com.apple.Safari</string>
<string>--entitynames</string>
<string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ThrottleInterval</key>
<integer>60</integer>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Library/Safari/Bookmarks.plist</string>
</array>
</dict>
...and 1 more line(s)
Contents of Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist
- mod date: Dec 15 10:55:51 2014
- checksum: 3001252484
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrixonline.GoToMeeting.G2MUpdate</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/CitrixOnline/GoToMeeting/G2MUpdate</string>
</array>
<key>StartInterval</key>
<integer>3660</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.parallels.mobile.startgui.launchagent.plist
- mod date: Mar 10 23:00:25 2015
- checksum: 662430762
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ExitTimeOut</key>
<integer>150</integer>
<key>Label</key>
<string>com.parallels.mobile.startgui.launchagent</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Parallels Access.app/Contents/MacOS/prl_deskctl_wizard</string>
<string>--autorun</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.valvesoftware.steamclean.plist
- mod date: Mar 7 15:48:06 2014
- checksum: 1327160095
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.valvesoftware.steamclean</string>
<key>Program</key>
<string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
<string>Public</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>SteamContentPaths</key>
<array>
<string>/Users/USER/Library/Application Support/Steam/SteamApps</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Applications/Steam.app</string>
</array>
</dict>
</plist>
App extensions
com.google.GoogleDrive.FinderSyncAPIExtension
com.parallels.desktop.console.Resource-Monitor
Installations
Topaz Detail2: 11/15/12, 2:58 PM
Topaz DeNoise 5: 11/15/12, 2:57 PM
Topaz Adjust 5: 1 -
Linksys wireless router G problem with ASUS Eee PC 1000H laptop
This is a new laptop with a Ralink rt2860 chipset. Problem: I have trouble connecting to the router at my office. When I can connect, I often get such a low connection speed that the signal drops out and I lose the connection entirely. I have no trouble connecting to other routers. ASUS tech support says this is not a problem with the laptop. The rep told me that some "older" routers have a problem recognizing the Ralink chipset. Logically, if I can connect but it drops out, does this indicate a need for a signal booster? Does anyone know about any related compatibility issues? Thanks for any help; this is driving me nutty!
I know just enough to be dangerous. How is the change the channel on the router changed? Sounds like a system administrator job...
-
[mostly solved]RaLink RT2860 wireless NIC not working, in eeePC 1000HE
I'm having trouble getting my wireless NIC to work.
I have a clean, up-to-date system, no [testing]. I'm using the stock kernel, 2.6.30, which according to the 1000HE wiki (http://wiki.archlinux.org/index.php/Asu … 000HE#WiFi), is supposed to work out of the box.
The problem I run into with iwconfig is that it doesn't set an essid. The essid shows as blank, then I run:
iwconfig ra0 essid "my id"
and iwconfig ra0 again shows a blank essid.
I've tried wpa_supplicant, and it just spams CTRL-EVENT-SCAN-RESULTS indefinitely (my config file is attached).
I've tried wifi radar, and it gives me errors about the network I'm trying to connect to having no AP address.
I've only tried to connect to the one network here that I have access to. It's an unsecured university network with many APs (I think it's called roaming or something?). Once you have an IP leased, you try to go to a website and are automatically forwarded to an authentication login page.
I've attached the output from a bunch of different commands:
ifconfig -a:
eth0 Link encap:Ethernet HWaddr 00:26:18:40:58:85
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ra0 Link encap:Ethernet HWaddr 00:25:D3:13:D2:4E
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:99 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13066 (12.7 Kb) TX bytes:0 (0.0 b)
Interrupt:19
iwconfig:
ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA"
Mode:Auto Frequency=2.412 GHz Bit Rate=1 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
iwconfig ra0 essid "hi": returns no output
afterward, iwconfig returns identical output as above
iwlist ra0 scan:
ra0 Scan completed :
Cell 01 - Address: 00:0C:E6:40:7E:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:65/100 Signal level:-64 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 02 - Address: 00:0C:E6:40:7E:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:65/100 Signal level:-64 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 03 - Address: 00:0C:E6:40:76:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:24/100 Signal level:-80 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 04 - Address: 00:0C:E6:40:76:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:34/100 Signal level:-76 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 05 - Address: 00:0C:E6:40:88:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:60/100 Signal level:-66 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 06 - Address: 00:0C:E6:40:7B:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 07 - Address: 00:0C:E6:40:97:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 08 - Address: 00:0C:E6:40:75:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:39/100 Signal level:-74 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 09 - Address: 00:0C:E6:40:88:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:65/100 Signal level:-64 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 10 - Address: 00:0C:E6:40:7B:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 11 - Address: 00:0C:E6:40:75:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:44/100 Signal level:-72 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 12 - Address: 00:0C:E6:40:8D:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 13 - Address: 00:0C:E6:40:8D:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
iwpriv:
ra0 Available private ioctls :
set (8BE2) : set 1024 char & get 0
connStatus (0004) : set 0 & get 2047 char
driverVer (0005) : set 0 & get 2047 char
bainfo (0006) : set 0 & get 2047 char
descinfo (0007) : set 0 & get 2047 char
radio_off (000A) : set 0 & get 2047 char
radio_on (000B) : set 0 & get 2047 char
show (0014) : set 1024 char & get 2047 char
bbp (8BE3) : set 2047 char & get 2047 char
mac (8BE5) : set 1024 char & get 1024 char
e2p (8BE7) : set 1024 char & get 1024 char
stat (8BE9) : set 0 & get 2047 char
get_site_survey (8BED) : set 0 & get 1024 char
lspci:
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
01:00.0 Network controller: RaLink RT2860
03:00.0 Ethernet controller: Attansic Technology Corp. L1e Gigabit Ethernet Adapter (rev b0)
wpa_supplicant -Dwext -ira0 -c/etc/wpa_supplicant.conf:
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-TERMINATING - signal 2 received
cat /etc/wpa_supplicant.conf:
# Catch all example that allows more or less all configuration modes
network={
ssid="UM Wireless Network"
scan_ssid=1
key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk="very secret passphrase"
eap=TTLS PEAP TLS
identity="[email protected]"
password="foobar"
ca_cert="/etc/cert/ca.pem"
client_cert="/etc/cert/user.pem"
private_key="/etc/cert/user.prv"
private_key_passwd="password"
phase1="peaplabel=0"
dmesg: (This was run after all the other commands. I ran the wpa_supplicant command a couple of times, so the tail of the output is the result of a few different attempts by wpa_supplicant to find a network.)
Linux version 2.6.30-ARCH (root@arch) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7f7a0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 080000000 write-back
1 base 07F800000 mask 0FF800000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e2000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007f7a0000 (usable)
modified: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
modified: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
modified: 000000007f7f0000 - 000000007f800000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000fff80000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7f6fc000 - 7f78fe11
Allocated new RAMDISK: 00628000 - 006bbe11
Move RAMDISK from 000000007f6fc000 - 000000007f78fe10 to 00628000 - 006bbe10
ACPI: RSDP 000fb9d0 00014 (v00 ACPIAM)
ACPI: RSDT 7f7a0000 0003C (v01 A_M_I_ OEMRSDT 04000920 MSFT 00000097)
ACPI: FACP 7f7a0200 00084 (v02 A_M_I_ OEMFACP 04000920 MSFT 00000097)
ACPI: DSDT 7f7a0430 05D8C (v01 A1192 A1192000 00000000 INTL 20051117)
ACPI: FACS 7f7ae000 00040
ACPI: APIC 7f7a0390 0005C (v01 A_M_I_ OEMAPIC 04000920 MSFT 00000097)
ACPI: MCFG 7f7a03f0 0003C (v01 A_M_I_ OEMMCFG 04000920 MSFT 00000097)
ACPI: OEMB 7f7ae040 00061 (v01 A_M_I_ AMI_OEM 04000920 MSFT 00000097)
ACPI: HPET 7f7a61c0 00038 (v01 A_M_I_ OEMHPET 04000920 MSFT 00000097)
ACPI: SSDT 7f7aeb40 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
1151MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000624e44] TEXT DATA BSS ==> [0000100000 - 0000624e44]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000625000 - 00006271e0] BRK ==> [0000625000 - 00006271e0]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000628000 - 00006bbe11] NEW RAMDISK ==> [0000628000 - 00006bbe11]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f7a0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007f7a0
On node 0 totalpages: 522031
free_area_init_node: node 0, pgdat c04c1380, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2304 pages used for memmap
HighMem zone: 292514 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c1ffa000, static data 24444 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951
Kernel command line: root=/dev/disk/by-uuid/2debd498-3ab0-459c-afbe-d75860e0d650 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1662.281 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:0007f7a0)
Memory: 2064176k/2088576k available (2902k kernel code, 23140k reserved, 1047k data, 392k init, 1179272k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc04e1000 - 0xc0543000 ( 392 kB)
.data : 0xc03d590f - 0xc04db6a8 (1047 kB)
.text : 0xc0100000 - 0xc03d590f (2902 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.08 BogoMIPS (lpj=5540936)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3326.54 BogoMIPS (lpj=5541676)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6652.63 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 0
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]
pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]
pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]
pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]
pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7eb7800-0xf7eb7bff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfbef0000-0xfbefffff]
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xfbefffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:08: ioport range 0x25c-0x25f has been reserved
system 00:08: ioport range 0x380-0x383 has been reserved
system 00:08: ioport range 0x400-0x41f has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x480-0x4bf has been reserved
system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0xe000-0xefff
pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.3: IO window: disabled
pci 0000:00:1c.3: MEM window: 0xf8000000-0xfbefffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 591k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1247582678.410:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1731
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 392k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf7eb7800 port 0xf7eb7900 irq 27
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0xf7eb7800 port 0xf7eb7a00 irq 27
ata4: DUMMY
pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT A disabled
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata6: port disabled. ignoring.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
udev: starting version 141
ACPI: AC Adapter [AC0] (on-line)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
ACPI: SSDT 7f7ae180 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 7f7ae410 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [P001] (supports 8 throttling states)
ACPI: SSDT 7f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 7f7ae380 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [P002] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (42 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
Linux agpgart interface v0.103
intel_rng: FWH not detected
usbcore: registered new device driver usb
input: PC Speaker as /devices/platform/pcspkr/input/input6
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
rt2860 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
=== pAd = f8591000, size = 580808 ===
<-- RTMPAllocAdapterBlock, Status=0
rt2860 0000:01:00.0: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ATL1E 0000:03:00.0: setting latency timer to 64
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
iTCO_vendor_support: vendor-support=0
eeepc: Eee PC Hotkey Driver
eeepc: Hotkey init flags 0x41
eeepc: Get control methods supported: 0x101713
input: Asus EeePC extra buttons as /devices/virtual/input/input8
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
usb 1-8: new high speed USB device using ehci_hcd and address 3
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
psmouse serio1: ID: 10 00 64
usb 1-8: configuration #1 chosen from 1 choice
elantech.c: assuming hardware version 2, firmware version 2.48
usb 5-1: new full speed USB device using uhci_hcd and address 2
elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
usb 5-1: configuration #1 chosen from 1 choice
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Linux video capture interface: v2.00
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
RX DESC f649f000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1336
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1375
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1641
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1470
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1641
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1641
RX DESC f649f000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
RX DESC f73ce000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1431
===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1240
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1619
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1619
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1588
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1619
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1714
===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 1779
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1409
===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1240
RX DESC f6948000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1240
===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1070
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1355
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1546
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1316
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1355
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1470
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1470
===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1165
===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1145
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1504
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1546
Last edited by mishchea (2009-07-15 02:42:39)Malstrond wrote:Mostly because Ralink just hacks their drivers together to work somehow. A module should never require files in /etc/, but they don't care. The file contains settings, ranging from packet thresholds to country selection. There is a readme file in the archive, you can change some interesting things in there, i.e. auto roaming.
The staging drivers included in the kernel have this settings file included in the module, but there have been problems with this in 2.6.30, among others, the included drivers for RT2870-based hardware, for example, can render your system unusable.
Sadly, there doesn't seem to be much effort on the side of Linux community either. Maybe it's because all the devs interested in this already bought one of earlier EEEs with an Atheros chipset.
I've got one of these cards and it works fine. I'm running 2.6.31.
I use a wpa_supplicant based connection. I suggest that you do the same, the config file is crap and it doesn't appear to accept iwconfig input.
For netcfg and this card, try netcfg 2.5 which will be out in the next 24 hours. In the meantime, you could configure your networks in a wpa_supplicant config file. Don't use a catch all like above, create a more specific one. -
My experience with new HP ENVY 17-j113el : 1200 euros spent to buy a lot of problems...
Good morning,
In April 2014 I have bought a nice, full-loaded, expensive (1200 euro) portable PC, HP ENVY 17-j113el.
Before I was using a smaller, cheaper HP G62 notebook: never have had any problem in three years, great prodct for the price.
With nice and new machine my nightmare started: wifi does not works form the first day, thanks to Ralink 3290 card. Low signals, intermitent functioning, disconnections. Requeste a replacement card to HP support, received after almost a month.
Replaced the card with the "new" Ralink 3290, and wifi signal started to be at normal level. After a short use, the signals started again to be intermittenly much lowest than the normal. Better than my original wifi card, but not as good as the signals received with my previous HP G62. Still having lowwifi signals, "floating" levels", and having the PC at 2 meters from the router shows up just a poor "-65" on inSSIDer.. And no, it is not a problem of my wifi router: never had any problems before with ANY device device.
In addition, since I have installed the new Ralink 3290 card and using wifi on this pc, another problem came out: somethimes there is a strong "click" form the audio speakers on the bottom, even if not playing any music or audio.
That is really annoying.
Other issues: after bios upgrade to 56 (recommended by HP, executed as HP Support Assistant software directed) I have experienced sporadic computer shut off immediately ater power up.
You push the power button, the computer starts, and after 2 or 3 seconds the computer shut down.
You have to push power button again to restart.
Additional minor issues (still not espected from a 1200 euro notebook): mousepad left key, even if clicking, does not recognize the "click". You have to push strong to make it work.
And also, the keyboard: poor, poor, poor keys feeling, and on left side it bend miserably when used.
Just to note: I am a 43 years old professional, I work as electronics and IT tecnician since more than 20 years, and I am not one of those who complains for nothing.
BUT, after buying HP for years with good satisfaction, this time I am realy disappointed with the lack of quality.
Came on HP, people does not spend 1200 euros to have a PC with this kinds of problems: bring a solution!
I espect from HP to fix all this issues with my "new" (sigh!) nice, wonderful looking, full loaded and expensive PC.
V/R,
Riccardo G.Hello Rightrik,
Thanks for posting on the HP Forums.
It seems the computer is facing a number of issues, most which are likely relating to hardware. In my opinion, since the computer it still relatively new, I would contact HP phone support. Your computer would either be serviced or replaced, and the issues will be resolved.
You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP. -
Hello to all, I installed one year ago chakra linux distrbution and all works fine but some things doesn't like to me, so I installed Slackware, but I don't have much time to spent compiling programs.... and compiling... so, I come back with arch + kde. The problem is the ATI video card, I have one 4870x2 PCI-e 16x 2gb gddr5 (chipset r700) and in the last installation I don't remember problems with the propietary driver. But this time the driver doesn't work.
My hardware is: motherboard gigabyte ga-ma970fxt-ud5p, phenom 2 945 black edition am3, 8gb ddr3 @1600mhz ocz reaper, hdd WD velociraptor 300gb, video card described before.
I made a fresh install last Monday and every works fine, but I want to install the ATI video propietary drivers and...
In the first step, I read five or six times this page https://wiki.archlinux.org/index.php/ATI_Catalyst and I followed the procedure according to the section called "Installing from AUR" and I made:
su root
pacman -Sy base-devel
su faktorqm
cd /home/faktorqm
wget http://aur.archlinux.org/packages/ca/ca … ils.tar.gz
wget https://aur.archlinux.org/packages/ca/c … mon.tar.gz
tar -zxvf catalyst-utils.tar.gz
tar -zxvf catalyst-daemon.tar.gz
cd catalyst-utils/
makepkg -s PKGBUILD
su root
pacman -U catalyst-utils-11.12-1-x86_64.pkg.tar.xz
su faktorqm
mv ati-driver-installer-11-12-x86.x86_64.run ../catalyst-daemon/
cd ..
cd catalyst-daemon/
makepkg -s PKGBUILD
su root
pacman -U catalyst-daemon-11.12-1-x86_64.pkg.tar.xz
su faktorqm
cd ..
No errors in this procedure.
note 0: my user is called "faktorqm"
note 1:
[faktorqm@the_missile /]$ uname -a
Linux the_missile 3.2.1-2-ARCH #1 SMP PREEMPT Mon Jan 23 12:40:01 UTC 2012 x86_64 AMD Phenom(tm) II X4 955 Processor AuthenticAMD GNU/Linux
[faktorqm@the_missile /]$
note 2:
[faktorqm@the_missile /]$ cat /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="fglrx"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
[faktorqm@the_missile /]$
note 4:
[faktorqm@the_missile /]$ cat /boot/grub/menu.lst
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# [url]https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution[/url]
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd2,1)
kernel /boot/vmlinuz-linux root=/dev/sda2 ro nomodeset acpi=off
initrd /boot/initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd2,1)
kernel /boot/vmlinuz-linux root=/dev/sda2 ro nomodeset acpi=off
initrd /boot/initramfs-linux-fallback.img
# (2) Windows
title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
[faktorqm@the_missile /]$
note 5:
cat /var/log/boot (output stripped)
Thu Jan 26 21:45:02 2012: :: Checking fglrx [BUSY] ^[[u: Loading fglrx [FAIL][
note 6:
[faktorqm@the_missile /]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.1-2-ARCH (nobody@skynet) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jan 23 12:40:01 UTC 2012
[ 0.000000] Command line: root=/dev/sda2 ro nomodeset acpi=off
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfde0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfde0000 - 00000000bfee0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790FXT-UD5P/GA-MA790FXT-UD5P, BIOS F8n 01/07/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 3 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 4 base 000200000000 mask FFFFC0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000240000000 aka 9216M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfde0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4760] f4760
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfde0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfc00000 page 2M
[ 0.000000] 00bfc00000 - 00bfde0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfde0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 1G
[ 0.000000] kernel direct mapping tables up to 240000000 @ bfddf000-bfde0000
[ 0.000000] RAMDISK: 37c7b000 - 37ff0000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfde0
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2096495
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 765472 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1290240 pages, LIFO batch:31
[ 0.000000] SFI: Simple Firmware Interface v0.81 [url]http://simplefirmware.org[/url]
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] Processor #2
[ 0.000000] Processor #3
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 4
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfde0000 - 00000000bfee0000
[ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
[ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
[ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s82048 r8192 d24448 u524288
[ 0.000000] pcpu-alloc: s82048 r8192 d24448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059626
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda2 ro nomodeset acpi=off
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 590a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 8108168k/9437184k available (4279k kernel code, 1051204k absent, 277812k reserved, 4601k data, 728k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3222.584 MHz processor.
[ 0.006669] Calibrating delay loop (skipped), value calculated using timer frequency.. 6447.71 BogoMIPS (lpj=10741946)
[ 0.006672] pid_max: default: 32768 minimum: 301
[ 0.006690] Security Framework initialized
[ 0.006693] AppArmor: AppArmor disabled by boot time parameter
[ 0.007218] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010432] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011639] Mount-cache hash table entries: 256
[ 0.011739] Initializing cgroup subsys cpuacct
[ 0.011744] Initializing cgroup subsys memory
[ 0.011751] Initializing cgroup subsys devices
[ 0.011752] Initializing cgroup subsys freezer
[ 0.011754] Initializing cgroup subsys net_cls
[ 0.011755] Initializing cgroup subsys blkio
[ 0.011776] tseg: 00bff00000
[ 0.011778] CPU: Physical Processor ID: 0
[ 0.011779] CPU: Processor Core ID: 0
[ 0.011781] mce: CPU supports 6 MCE banks
[ 0.011788] using AMD E400 aware idle routine
[ 0.012331] ftrace: allocating 16774 entries in 66 pages
[ 0.013474] ExtINT not setup in hardware but reported by MP table
[ 0.013954] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.049389] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.153335] Performance Events: AMD PMU driver.
[ 0.153338] ... version: 0
[ 0.153339] ... bit width: 48
[ 0.153340] ... generic registers: 4
[ 0.153341] ... value mask: 0000ffffffffffff
[ 0.153342] ... max period: 00007fffffffffff
[ 0.153344] ... fixed-purpose events: 0
[ 0.153345] ... event mask: 000000000000000f
[ 0.153372] System has AMD C1E enabled
[ 0.153381] Switch to broadcast mode on CPU0
[ 0.173363] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.199996] Booting Node 0, Processors #1
[ 0.199998] smpboot cpu 1: start_ip = 9a000
[ 0.296660] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.296660] Switch to broadcast mode on CPU1
[ 0.316659] #2
[ 0.316660] smpboot cpu 2: start_ip = 9a000
[ 0.413323] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.413319] Switch to broadcast mode on CPU2
[ 0.433315] #3 Ok.
[ 0.433316] smpboot cpu 3: start_ip = 9a000
[ 0.529987] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.529978] Switch to broadcast mode on CPU3
[ 0.536635] Brought up 4 CPUs
[ 0.536637] Total of 4 processors activated (25789.68 BogoMIPS).
[ 0.540078] devtmpfs: initialized
[ 0.541202] PM: Registering ACPI NVS region at bfee0000 (12288 bytes)
[ 0.541202] print_constraints: dummy:
[ 0.541202] NET: Registered protocol family 16
[ 0.543338] node 0 link 0: io port [9000, ffff]
[ 0.543340] TOM: 00000000c0000000 aka 3072M
[ 0.543342] Fam 10h mmconf [e0000000, e00fffff]
[ 0.543343] node 0 link 0: mmio [a0000, bffff]
[ 0.543345] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.543347] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.543348] node 0 link 0: mmio [e0000000, e08fffff] ==> [e0100000, e08fffff]
[ 0.543351] TOM2: 0000000240000000 aka 9216M
[ 0.543352] bus: [00, 08] on node 0 link 0
[ 0.543354] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.543355] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.543357] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[ 0.543358] bus: 00 index 3 [mem 0xe0900000-0xffffffff]
[ 0.543359] bus: 00 index 4 [mem 0xe0100000-0xe08fffff]
[ 0.543361] bus: 00 index 5 [mem 0x240000000-0xfcffffffff]
[ 0.543369] Extended Config Space enabled on 1 nodes
[ 0.543426] PCI: Using configuration type 1 for base access
[ 0.543427] PCI: Using configuration type 1 for extended access
[ 0.543782] bio: create slab <bio-0> at 0
[ 0.543782] ACPI: Interpreter disabled.
[ 0.543782] vgaarb: loaded
[ 0.543782] PCI: Probing PCI hardware
[ 0.543782] PCI: Probing PCI hardware (bus 00)
[ 0.543782] pci 0000:00:00.0: [1002:5956] type 0 class 0x000600
[ 0.543782] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.543782] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.543782] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.543782] pci 0000:00:02.0: PME# disabled
[ 0.543782] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
[ 0.543782] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.543782] pci 0000:00:07.0: PME# disabled
[ 0.543782] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
[ 0.543782] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.543782] pci 0000:00:09.0: PME# disabled
[ 0.543782] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.543782] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.543782] pci 0000:00:0a.0: PME# disabled
[ 0.543782] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.543782] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.543782] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.543782] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.543782] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.543782] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.543782] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.543782] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.543782] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.543782] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.543782] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.543782] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.543818] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.543835] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.543900] pci 0000:00:12.2: supports D1 D2
[ 0.543901] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.543905] pci 0000:00:12.2: PME# disabled
[ 0.543925] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.543937] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.543995] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.544007] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.544070] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.544088] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.544152] pci 0000:00:13.2: supports D1 D2
[ 0.544154] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.544157] pci 0000:00:13.2: PME# disabled
[ 0.544179] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.544264] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.544279] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.544287] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.544296] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.544305] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.544313] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.544358] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.544378] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.544431] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.544435] pci 0000:00:14.2: PME# disabled
[ 0.544446] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.544515] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.544552] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.544564] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.544624] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.544636] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.544645] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.544655] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.544666] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.544682] PCI: peer root bus 00 res updated from pci conf
[ 0.544710] pci 0000:01:00.0: [10b5:8647] type 1 class 0x000604
[ 0.544718] pci 0000:01:00.0: reg 10: [mem 0xfdae0000-0xfdafffff]
[ 0.544750] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.544753] pci 0000:01:00.0: PME# disabled
[ 0.549971] pci 0000:00:02.0: PCI bridge to [bus 01-04]
[ 0.549974] pci 0000:00:02.0: bridge window [io 0xb000-0xcfff]
[ 0.549977] pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfdafffff]
[ 0.549980] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.550020] pci 0000:02:04.0: [10b5:8647] type 1 class 0x000604
[ 0.550059] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[ 0.550062] pci 0000:02:04.0: PME# disabled
[ 0.550085] pci 0000:02:08.0: [10b5:8647] type 1 class 0x000604
[ 0.550124] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
[ 0.550127] pci 0000:02:08.0: PME# disabled
[ 0.550153] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.550158] pci 0000:01:00.0: bridge window [io 0xb000-0xcfff]
[ 0.550161] pci 0000:01:00.0: bridge window [mem 0xfd800000-0xfd9fffff]
[ 0.550165] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.550203] pci 0000:03:00.0: [1002:9441] type 0 class 0x000300
[ 0.550216] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.550226] pci 0000:03:00.0: reg 18: [mem 0xfd9e0000-0xfd9effff 64bit]
[ 0.550233] pci 0000:03:00.0: reg 20: [io 0xce00-0xceff]
[ 0.550246] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.550263] pci 0000:03:00.0: supports D1 D2
[ 0.550281] pci 0000:03:00.1: [1002:aa30] type 0 class 0x000403
[ 0.550294] pci 0000:03:00.1: reg 10: [mem 0xfd9fc000-0xfd9fffff 64bit]
[ 0.550338] pci 0000:03:00.1: supports D1 D2
[ 0.556639] pci 0000:02:04.0: PCI bridge to [bus 03-03]
[ 0.556643] pci 0000:02:04.0: bridge window [io 0xc000-0xcfff]
[ 0.556646] pci 0000:02:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.556651] pci 0000:02:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.556692] pci 0000:04:00.0: [1002:9441] type 0 class 0x000380
[ 0.556707] pci 0000:04:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.556719] pci 0000:04:00.0: reg 18: [mem 0xfd8f0000-0xfd8fffff 64bit]
[ 0.556727] pci 0000:04:00.0: reg 20: [io 0xbe00-0xbeff]
[ 0.556742] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.556762] pci 0000:04:00.0: supports D1 D2
[ 0.563305] pci 0000:02:08.0: PCI bridge to [bus 04-04]
[ 0.563310] pci 0000:02:08.0: bridge window [io 0xb000-0xbfff]
[ 0.563313] pci 0000:02:08.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.563317] pci 0000:02:08.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.563357] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.563369] pci 0000:05:00.0: reg 10: [io 0xae00-0xaeff]
[ 0.563388] pci 0000:05:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.563401] pci 0000:05:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[ 0.563410] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.563436] pci 0000:05:00.0: supports D1 D2
[ 0.563437] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.563441] pci 0000:05:00.0: PME# disabled
[ 0.569972] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[ 0.569975] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 0.569977] pci 0000:00:07.0: bridge window [mem 0xfd500000-0xfd5fffff]
[ 0.569980] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.570011] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
[ 0.570022] pci 0000:06:00.0: reg 10: [io 0xee00-0xeeff]
[ 0.570042] pci 0000:06:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref]
[ 0.570054] pci 0000:06:00.0: reg 20: [mem 0xfdde0000-0xfddeffff 64bit pref]
[ 0.570063] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.570089] pci 0000:06:00.0: supports D1 D2
[ 0.570090] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.570094] pci 0000:06:00.0: PME# disabled
[ 0.576638] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.576640] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.576643] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.576646] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.576676] pci 0000:07:00.0: [197b:2363] type 0 class 0x000101
[ 0.576738] pci 0000:07:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff]
[ 0.576769] pci 0000:07:00.0: PME# supported from D3hot
[ 0.576773] pci 0000:07:00.0: PME# disabled
[ 0.576793] pci 0000:07:00.1: [197b:2363] type 0 class 0x000101
[ 0.576810] pci 0000:07:00.1: reg 10: [io 0xdf00-0xdf07]
[ 0.576820] pci 0000:07:00.1: reg 14: [io 0xde00-0xde03]
[ 0.576830] pci 0000:07:00.1: reg 18: [io 0xdd00-0xdd07]
[ 0.576840] pci 0000:07:00.1: reg 1c: [io 0xdc00-0xdc03]
[ 0.576849] pci 0000:07:00.1: reg 20: [io 0xdb00-0xdb0f]
[ 0.576899] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.576908] pci 0000:00:0a.0: PCI bridge to [bus 07-07]
[ 0.576910] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.576913] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.576916] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.576949] pci 0000:08:07.0: [1814:0601] type 0 class 0x000280
[ 0.576969] pci 0000:08:07.0: reg 10: [mem 0xfd7e0000-0xfd7effff]
[ 0.577077] pci 0000:08:0e.0: [104c:8024] type 0 class 0x000c00
[ 0.577098] pci 0000:08:0e.0: reg 10: [mem 0xfd7ff000-0xfd7ff7ff]
[ 0.577110] pci 0000:08:0e.0: reg 14: [mem 0xfd7f8000-0xfd7fbfff]
[ 0.577186] pci 0000:08:0e.0: supports D1 D2
[ 0.577187] pci 0000:08:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.577192] pci 0000:08:0e.0: PME# disabled
[ 0.577223] pci 0000:00:14.4: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.577227] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.577231] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.577235] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff pref]
[ 0.577237] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.577239] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.577240] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.577242] pci 0000:00:14.4: bridge window [mem 0xe0900000-0xffffffff] (subtractive decode)
[ 0.577244] pci 0000:00:14.4: bridge window [mem 0xe0100000-0xe08fffff] (subtractive decode)
[ 0.577246] pci 0000:00:14.4: bridge window [mem 0x240000000-0xfcffffffff] (subtractive decode)
[ 0.577716] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.578250] PCI: pci_cache_line_size set to 64 bytes
[ 0.578257] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.578338] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.578340] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.578342] reserve RAM buffer: 00000000bfde0000 - 00000000bfffffff
[ 0.578405] NetLabel: Initializing
[ 0.578406] NetLabel: domain hash size = 128
[ 0.578407] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.578416] NetLabel: unlabeled traffic allowed by default
[ 0.582576] pnp: PnP ACPI: disabled
[ 0.583349] PCI: max bus depth: 3 pci_try_num: 4
[ 0.583381] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
[ 0.583383] pci 0000:02:04.0: PCI bridge to [bus 03-03]
[ 0.583385] pci 0000:02:04.0: bridge window [io 0xc000-0xcfff]
[ 0.583389] pci 0000:02:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.583392] pci 0000:02:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.583397] pci 0000:04:00.0: BAR 6: assigned [mem 0xfd800000-0xfd81ffff pref]
[ 0.583398] pci 0000:02:08.0: PCI bridge to [bus 04-04]
[ 0.583400] pci 0000:02:08.0: bridge window [io 0xb000-0xbfff]
[ 0.583403] pci 0000:02:08.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.583406] pci 0000:02:08.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.583410] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.583412] pci 0000:01:00.0: bridge window [io 0xb000-0xcfff]
[ 0.583416] pci 0000:01:00.0: bridge window [mem 0xfd800000-0xfd9fffff]
[ 0.583419] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.583423] pci 0000:00:02.0: PCI bridge to [bus 01-04]
[ 0.583424] pci 0000:00:02.0: bridge window [io 0xb000-0xcfff]
[ 0.583427] pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfdafffff]
[ 0.583429] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.583432] pci 0000:05:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
[ 0.583433] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[ 0.583435] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 0.583437] pci 0000:00:07.0: bridge window [mem 0xfd500000-0xfd5fffff]
[ 0.583439] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.583442] pci 0000:06:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[ 0.583444] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.583446] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.583448] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.583450] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.583453] pci 0000:00:0a.0: PCI bridge to [bus 07-07]
[ 0.583455] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.583457] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.583459] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.583462] pci 0000:00:14.4: PCI bridge to [bus 08-08]
[ 0.583464] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.583469] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.583472] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff pref]
[ 0.583488] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.583491] pci 0000:00:02.0: setting latency timer to 64
[ 0.583495] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.583498] pci 0000:01:00.0: setting latency timer to 64
[ 0.583503] pci 0000:02:04.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.583506] pci 0000:02:04.0: setting latency timer to 64
[ 0.583510] pci 0000:02:08.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.583513] pci 0000:02:08.0: setting latency timer to 64
[ 0.583521] pci 0000:00:07.0: PCI->APIC IRQ transform: INT A -> IRQ 19
[ 0.583523] pci 0000:00:07.0: setting latency timer to 64
[ 0.583530] pci 0000:00:09.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 0.583532] pci 0000:00:09.0: setting latency timer to 64
[ 0.583535] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.583537] pci 0000:00:0a.0: setting latency timer to 64
[ 0.583544] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.583545] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.583547] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xdfffffff]
[ 0.583548] pci_bus 0000:00: resource 7 [mem 0xe0900000-0xffffffff]
[ 0.583550] pci_bus 0000:00: resource 8 [mem 0xe0100000-0xe08fffff]
[ 0.583551] pci_bus 0000:00: resource 9 [mem 0x240000000-0xfcffffffff]
[ 0.583553] pci_bus 0000:01: resource 0 [io 0xb000-0xcfff]
[ 0.583554] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfdafffff]
[ 0.583556] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.583558] pci_bus 0000:02: resource 0 [io 0xb000-0xcfff]
[ 0.583559] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd9fffff]
[ 0.583561] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.583562] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.583564] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.583565] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.583567] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.583569] pci_bus 0000:04: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.583570] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.583572] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.583573] pci_bus 0000:05: resource 1 [mem 0xfd500000-0xfd5fffff]
[ 0.583575] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.583576] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.583578] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.583579] pci_bus 0000:06: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.583581] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.583582] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.583584] pci_bus 0000:07: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.583586] pci_bus 0000:08: resource 0 [io 0x9000-0x9fff]
[ 0.583587] pci_bus 0000:08: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.583589] pci_bus 0000:08: resource 2 [mem 0xfd600000-0xfd6fffff pref]
[ 0.583590] pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
[ 0.583592] pci_bus 0000:08: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.583593] pci_bus 0000:08: resource 6 [mem 0xc0000000-0xdfffffff]
[ 0.583595] pci_bus 0000:08: resource 7 [mem 0xe0900000-0xffffffff]
[ 0.583596] pci_bus 0000:08: resource 8 [mem 0xe0100000-0xe08fffff]
[ 0.583598] pci_bus 0000:08: resource 9 [mem 0x240000000-0xfcffffffff]
[ 0.583619] NET: Registered protocol family 2
[ 0.583770] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.584809] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.587809] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.588112] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.588114] TCP reno registered
[ 0.588124] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.588174] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.588275] NET: Registered protocol family 1
[ 0.919963] pci 0000:03:00.0: Boot video device
[ 0.919980] PCI: CLS 64 bytes, default 64
[ 0.920026] Unpacking initramfs...
[ 0.965040] Freeing initrd memory: 3540k freed
[ 0.966631] PCI-DMA: Disabling AGP.
[ 0.968974] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.968975] PCI-DMA: using GART IOMMU.
[ 0.968977] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.971843] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.972020] IBS: LVT offset 1 assigned
[ 0.972020] perf: AMD IBS detected (0x0000001f)
[ 0.972020] audit: initializing netlink socket (disabled)
[ 0.972020] type=2000 audit(1327614295.969:1): initialized
[ 0.983339] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.013377] VFS: Disk quotas dquot_6.5.2
[ 1.013418] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.013481] msgmni has been set to 15971
[ 1.013571] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.013571] io scheduler noop registered
[ 1.013571] io scheduler deadline registered
[ 1.013571] io scheduler cfq registered (default)
[ 1.015654] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.015654] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.015654] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.015654] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 1.015654] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.015654] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
[ 1.015654] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.015654] pcieport 0000:00:0a.0: irq 43 for MSI/MSI-X
[ 1.015654] pcieport 0000:01:00.0: setting latency timer to 64
[ 1.015654] pcieport 0000:01:00.0: irq 44 for MSI/MSI-X
[ 1.015654] pcieport 0000:02:04.0: setting latency timer to 64
[ 1.015654] pcieport 0000:02:04.0: irq 45 for MSI/MSI-X
[ 1.015654] pcieport 0000:02:08.0: setting latency timer to 64
[ 1.015654] pcieport 0000:02:08.0: irq 46 for MSI/MSI-X
[ 1.015654] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.036604] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.089984] Linux agpgart interface v0.103
[ 1.089984] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.090029] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.090040] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.090949] mousedev: PS/2 mouse device common for all mice
[ 1.090949] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.090949] rtc0: alarms up to one day, 114 bytes nvram
[ 1.090949] cpuidle: using governor ladder
[ 1.090949] cpuidle: using governor menu
[ 1.090949] TCP cubic registered
[ 1.090949] NET: Registered protocol family 17
[ 1.090949] Registering the dns_resolver key type
[ 1.090949] PM: Hibernation image not present or could not be loaded.
[ 1.090949] registered taskstats version 1
[ 1.096953] rtc_cmos rtc_cmos: setting system clock to 2012-01-26 21:44:57 UTC (1327614297)
[ 1.096980] Initializing network drop monitor service
[ 1.097877] Freeing unused kernel memory: 728k freed
[ 1.098012] Write protecting the kernel read-only data: 8192k
[ 1.102668] Freeing unused kernel memory: 1848k freed
[ 1.104691] Freeing unused kernel memory: 696k freed
[ 1.110427] udevd[88]: starting version 178
[ 1.135385] SCSI subsystem initialized
[ 1.138212] usbcore: registered new interface driver usbfs
[ 1.138227] usbcore: registered new interface driver hub
[ 1.138580] usbcore: registered new device driver usb
[ 1.140963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.141074] ehci_hcd 0000:00:12.2: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 1.141108] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.141134] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.141143] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.141178] ehci_hcd 0000:00:12.2: debug port 1
[ 1.141201] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.141313] libata version 3.00 loaded.
[ 1.148154] Disabling lock debugging due to kernel taint
[ 1.148174] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 1.149947] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.150125] hub 1-0:1.0: USB hub found
[ 1.150131] hub 1-0:1.0: 6 ports detected
[ 1.150373] ehci_hcd 0000:00:13.2: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 1.150416] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.153107] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
[ 1.153224] fglrx: Unknown symbol acpi_lid_open (err 0)
[ 1.153224] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
[ 1.156619] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.156631] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.156658] ehci_hcd 0000:00:13.2: debug port 1
[ 1.156682] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.157683] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
[ 1.157800] fglrx: Unknown symbol acpi_lid_open (err 0)
[ 1.157842] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
[ 1.160890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.166602] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.166655] hub 2-0:1.0: USB hub found
[ 1.166658] hub 2-0:1.0: 6 ports detected
[ 1.166724] ahci 0000:00:11.0: version 3.0
[ 1.166724] ahci 0000:00:11.0: PCI->APIC IRQ transform: INT A -> IRQ 22
[ 1.166724] ahci 0000:00:11.0: irq 47 for MSI/MSI-X
[ 1.166785] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.166788] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.167127] scsi0 : ahci
[ 1.167127] scsi1 : ahci
[ 1.167127] scsi2 : ahci
[ 1.167127] scsi3 : ahci
[ 1.167127] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 47
[ 1.167127] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 47
[ 1.167127] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 47
[ 1.167127] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 47
[ 1.167127] ahci 0000:07:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 1.167127] pata_atiixp 0000:00:14.1: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 1.167127] scsi4 : pata_atiixp
[ 1.167127] scsi5 : pata_atiixp
[ 1.167127] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.167127] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.167127] ohci_hcd 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 1.167127] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.167127] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.167127] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.179950] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.179953] ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.179957] ahci 0000:07:00.0: setting latency timer to 64
[ 1.180169] scsi6 : ahci
[ 1.180169] scsi7 : ahci
[ 1.180169] ata7: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 18
[ 1.180169] ata8: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 18
[ 1.180169] pata_acpi 0000:07:00.1: enabling device (0000 -> 0001)
[ 1.180169] pata_acpi 0000:07:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18
[ 1.180169] pata_acpi 0000:07:00.1: setting latency timer to 64
[ 1.224303] hub 3-0:1.0: USB hub found
[ 1.224303] hub 3-0:1.0: 3 ports detected
[ 1.224334] ohci_hcd 0000:00:12.1: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 1.224334] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.224334] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.224334] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.280959] hub 4-0:1.0: USB hub found
[ 1.280959] hub 4-0:1.0: 3 ports detected
[ 1.280986] ohci_hcd 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 1.280986] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.280986] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.280986] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.333280] ata6.00: ATA-8: ST2000DM001-9YN164, CC96, max UDMA/133
[ 1.333283] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.337945] hub 5-0:1.0: USB hub found
[ 1.337945] hub 5-0:1.0: 3 ports detected
[ 1.337978] ohci_hcd 0000:00:13.1: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 1.337978] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.337978] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.337978] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.359919] ata6.01: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 1.359922] ata6.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.373275] ata6.00: configured for UDMA/100
[ 1.394288] hub 6-0:1.0: USB hub found
[ 1.394288] hub 6-0:1.0: 3 ports detected
[ 1.394311] ohci_hcd 0000:00:14.5: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 1.394311] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.394311] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.394311] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.436583] ata6.01: configured for UDMA/100
[ 1.450961] hub 7-0:1.0: USB hub found
[ 1.450961] hub 7-0:1.0: 2 ports detected
[ 1.489926] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.493261] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.499923] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.499932] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.649914] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.649910] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.02, max UDMA/100
[ 1.653237] ata3.00: configured for UDMA/100
[ 1.653263] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.02 PQ: 0 ANSI: 5
[ 1.655553] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.676566] ata4.00: HPA detected: current 586070255, native 586072368
[ 1.676570] ata4.00: ATA-8: WDC WD3000HLFS-01G6U0, 04.04V01, max UDMA/133
[ 1.676570] ata4.00: 586070255 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.686562] ata4.00: configured for UDMA/133
[ 1.686604] scsi 3:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
[ 1.686689] scsi 5:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC96 PQ: 0 ANSI: 5
[ 1.686712] scsi 5:0:1:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 1.687055] pata_jmicron 0000:07:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18
[ 1.687055] pata_jmicron 0000:07:00.1: setting latency timer to 64
[ 1.687055] sd 3:0:0:0: [sda] 586070255 512-byte logical blocks: (300 GB/279 GiB)
[ 1.687055] sd 3:0:0:0: [sda] Write Protect is off
[ 1.687055] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.687055] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.687055] sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.687055] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 1.687055] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.687055] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.687055] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.687055] sd 5:0:1:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.687055] sd 5:0:1:0: [sdc] Write Protect is off
[ 1.687055] sd 5:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.687055] sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.687055] scsi8 : pata_jmicron
[ 1.687055] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.687055] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.689935] scsi9 : pata_jmicron
[ 1.690067] ata9: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 18
[ 1.690067] ata10: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 18
[ 1.690067] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.706564] usb 3-3: new low-speed USB device number 2 using ohci_hcd
[ 1.709922] sdb: sdb1 sdb2
[ 1.710504] sda: sda1 sda2 sda3 sda4
[ 1.710517] sda: p4 size 20969472 extends beyond EOD, enabling native capacity
[ 1.710517] ata4: hard resetting link
[ 1.726599] sdc: sdc1
[ 1.731420] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.736584] sd 5:0:1:0: [sdc] Attached SCSI disk
[ 1.896683] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input0
[ 1.897345] generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
[ 1.906614] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input1
[ 1.907285] generic-usb 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
[ 1.907285] usbcore: registered new interface driver usbhid
[ 1.907285] usbhid: USB HID core driver
[ 1.973212] Switching to clocksource tsc
[ 2.129599] usb 4-1: new low-speed USB device number 2 using ohci_hcd
[ 2.193273] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.208095] ata4.00: n_sectors mismatch 586070255 != 586072368
[ 2.208098] ata4.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[ 2.216578] ata4.00: configured for UDMA/133
[ 2.216582] ata4: EH complete
[ 2.216668] sd 3:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 2.216905] sda: detected capacity change from 300067970560 to 300069052416
[ 2.243307] sda: sda1 sda2 sda3 sda4
[ 2.243590] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.341779] input: Genius Multimedia Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input2
[ 2.341812] generic-usb 0003:0458:0708.0003: input,hidraw2: USB HID v1.11 Keyboard [Genius Multimedia Keyboard] on usb-0000:00:12.1-1/input0
[ 2.361632] input: Genius Multimedia Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input3
[ 2.361681] generic-usb 0003:0458:0708.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Genius Multimedia Keyboard] on usb-0000:00:12.1-1/input1
[ 2.939621] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.992107] udevd[243]: starting version 178
[ 4.220355] EDAC MC: Ver: 2.1.0
[ 4.223287] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.260077] MCE: In-kernel MCE decoding enabled.
[ 4.265446] AMD64 EDAC driver v3.4.0
[ 4.265512] EDAC amd64: DRAM ECC disabled.
[ 4.265519] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.265520] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.265521] (Note that use of the override may cause unknown side effects.)
[ 4.289047] firewire_ohci 0000:08:0e.0: PCI->APIC IRQ transform: INT A -> IRQ 22
[ 4.309438] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.309453] r8169 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 19
[ 4.309480] r8169 0000:05:00.0: setting latency timer to 64
[ 4.309519] r8169 0000:05:00.0: irq 48 for MSI/MSI-X
[ 4.309671] r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc900017a0000, 00:24:1d:76:91:9c, XID 1c4000c0 IRQ 48
[ 4.309673] r8169 0000:05:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.309707] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.309719] r8169 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 4.309732] r8169 0000:06:00.0: setting latency timer to 64
[ 4.309766] r8169 0000:06:00.0: irq 49 for MSI/MSI-X
[ 4.309895] r8169 0000:06:00.0: eth1: RTL8168c/8111c at 0xffffc9000175a000, 00:24:1d:76:91:9e, XID 1c4000c0 IRQ 49
[ 4.309898] r8169 0000:06:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.319010] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.319060] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.339695] firewire_ohci: Added fw-ohci device 0000:08:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 4.347192] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.368446] cfg80211: Calling CRDA to update world regulatory domain
[ 4.439847] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
[ 4.439887] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
[ 4.440213] fglrx: Unknown symbol acpi_lid_open (err 0)
[ 4.440242] fglrx: Unknown symbol acpi_lid_open (err 0)
[ 4.440372] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
[ 4.440384] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
[ 4.518173] rt2800pci 0000:08:07.0: PCI->APIC IRQ transform: INT A -> IRQ 21
[ 4.546577] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.546764] Registered led device: rt2800pci-phy0::radio
[ 4.546777] Registered led device: rt2800pci-phy0::assoc
[ 4.546791] Registered led device: rt2800pci-phy0::quality
[ 4.566190] snd_hda_intel 0000:00:14.2: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 4.712416] hda_codec: ALC889A: BIOS auto-probing.
[ 4.729011] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 4.729173] snd_hda_intel 0000:03:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18
[ 4.729237] snd_hda_intel 0000:03:00.1: irq 50 for MSI/MSI-X
[ 4.729256] snd_hda_intel 0000:03:00.1: setting latency timer to 64
[ 4.743475] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 4.743566] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:04.0/0000:03:00.1/sound/card1/input6
[ 4.839477] firewire_core: created device fw0: GUID 00aa981000001fd0, S400
[ 5.683949] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.731153] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.795031] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.871329] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.885607] Adding 10484732k swap on /dev/sda4. Priority:-1 extents:1 across:10484732k
[ 6.915362] r8169 0000:05:00.0: eth0: link down
[ 6.915375] r8169 0000:05:00.0: eth0: link down
[ 8.609247] r8169 0000:05:00.0: eth0: link up
[faktorqm@the_missile /]$
note 7:
[faktorqm@the_missile /]$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:07.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ab)
02:04.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ab)
02:08.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ab)
03:00.0 VGA compatible controller: ATI Technologies Inc R700 [Radeon HD 4870 X2]
03:00.1 Audio device: ATI Technologies Inc RV770 HDMI Audio [Radeon HD 4850/4870]
04:00.0 Display controller: ATI Technologies Inc R700 [Radeon HD 4870 X2]
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
08:07.0 Network controller: Ralink corp. RT2800 802.11n PCI
08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
[faktorqm@the_missile /]$
note 8:
[root@the_missile /]# cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
[root@the_missile /]#
Now, the problem:
[root@the_missile /]# modprobe -vvvv fglrx
insmod /lib/modules/3.2.1-2-ARCH/kernel/drivers/acpi/button.ko.gz
libkmod: kmod_module_insert_module: Failed to insert module '/lib/modules/3.2.1-2-ARCH/kernel/drivers/acpi/button.ko.gz': No such device
[root@the_missile /]#
now, if you see menu.lst from grub, I disabled acpi because the kernel never boot if that option is not especified. I tried with acpi=noirq and acpi=force and the kernel never boot. So, I don't have a solution in my mind, and I don't know one path to follow. If someone can give me just an idea of what happend, I will really appreciate that.
KDE works fine, and X starts fine.
pages that I read:
https://wiki.archlinux.org/index.php/ATI_Catalyst
https://bbs.archlinux.org/viewtopic.php?id=79509 (what's about this??)
https://bbs.archlinux.org/viewtopic.php?id=123669
and many many others pages talking about acpi, lacpi, apic, etc.
Thank you for your time in advance. Regards!!
Last edited by faktorqm (2012-01-27 02:25:31)I forgot to mention that I blacklisted the radeon module following the new procedure in /etc/modprobe.d/blacklist.conf and the contest of this file is "blacklist radeon" and my rc.conf is:
[faktorqm@the_missile /]$ cat /etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="America/Argentina/Buenos_Aires"
KEYMAP="bg-cp855"
CONSOLEFONT="cp850-8x16"
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="the_missile"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(autofglrx hwclock syslog-ng network netfs crond kdm)
[faktorqm@the_missile /]$
THANK YOU AGAIN!! Regards!!
Last edited by faktorqm (2012-01-27 02:26:15) -
IPhone 4s Sync problems to iTunes on Win 7
I have my iPhone 4s and iTunes set up for WiFi syncing.
I plug the iPhone into power, have iTunes up on the same network.
But I never see the iPhone show up under Devices.
Then I tried connecting the iPhone via USB to Windows/iTunes.
It is identified by Windows. But still not by iTunes.
Restarted iTunes. Restarted AppleMobileDeviceHelper.
Finally connected.
Here is some of the log from AppleMobileDeviceHelper:
2013-03-10 14:50:17.609|AppleMobileDeviceHelper.exe|5340:5055120|DeviceLinkListener.c:_cop yMobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 14:50:17.809|AppleMobileDeviceHelper.exe|5340:5055120|DeviceLinkListener.c:_set MobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 14:50:17.809|AppleMobileDeviceHelper.exe|5340:5055120|AppleMobileDeviceHelper.m :_setTetheredSyncLockdownInfoForTarget| ERROR: Could not set tethered sync info (<CFBasicHash 03A11980 [72218078]>{type = mutable dict, count = 1,
entries =>
2 : <CFString 039C85F0 [72218078]>{contents = "SyncingOS"} = <CFString 005194A0 [72218078]>{contents = "iPhone"}
) in lockdown for com.apple.Bookmarks (Bookmarks): -402653052
2013-03-10 14:52:16.892|AppleMobileDeviceHelper.exe|5340:5055120|DeviceLinkListener.c:_cop yMobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 14:52:16.894|AppleMobileDeviceHelper.exe|5340:5055120|DeviceLinkListener.c:_set MobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 14:52:16.895|AppleMobileDeviceHelper.exe|5340:5055120|AppleMobileDeviceHelper.m :_setTetheredSyncLockdownInfoForTarget| ERROR: Could not set tethered sync info (<CFBasicHash 03A12AC8 [72218078]>{type = mutable dict, count = 1,
entries =>
2 : <CFString 039C85F0 [72218078]>{contents = "SyncingOS"} = <CFString 005194A0 [72218078]>{contents = "iPhone"}
) in lockdown for com.apple.Bookmarks (Bookmarks): -402653052
2013-03-10 16:11:14.799|AppleMobileDeviceHelper.exe|2372:4022944|DeviceLinkListener.c:_cop yMobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 16:11:16.064|AppleMobileDeviceHelper.exe|2372:4022944|DeviceLinkListener.c:_cop yMobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 16:11:16.066|AppleMobileDeviceHelper.exe|2372:4022944|DeviceLinkListener.c:_set MobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 16:11:16.066|AppleMobileDeviceHelper.exe|2372:4022944|AppleMobileDeviceHelper.m :_setTetheredSyncLockdownInfoForTarget| ERROR: Could not set tethered sync info (<CFBasicHash 0390A6F8 [72218078]>{type = mutable dict, count = 1,
entries =>
2 : <CFString 0042A608 [72218078]>{contents = "SyncingOS"} = <CFString 038CE478 [72218078]>{contents = "iPhone"}
) in lockdown for com.apple.Bookmarks (Bookmarks): -402653052
2013-03-10 16:12:27.569|AppleMobileDeviceHelper.exe|2372:4022944|DeviceLinkListener.c:_cop yMobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 16:12:27.572|AppleMobileDeviceHelper.exe|2372:4022944|DeviceLinkListener.c:_set MobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 16:12:27.572|AppleMobileDeviceHelper.exe|2372:4022944|AppleMobileDeviceHelper.m :_setTetheredSyncLockdownInfoForTarget| ERROR: Could not set tethered sync info (<CFBasicHash 03907AC8 [72218078]>{type = mutable dict, count = 1,
entries =>
2 : <CFString 0042A608 [72218078]>{contents = "SyncingOS"} = <CFString 038CE478 [72218078]>{contents = "iPhone"}
) in lockdown for com.apple.Bookmarks (Bookmarks): -402653052
2013-03-10 16:12:37.583|AppleMobileDeviceHelper.exe|2372:4022944|AppleMobileDeviceHelper.m :_getDisabledDataClassNamesFromLockdownForTarget| ERROR: Could not find a device with the target identifier 0c6ca7429ebe24f88ce82412f1ffa38605299155. Assuming there are no disabled data classes.
2013-03-10 17:19:00.893|AppleMobileDeviceHelper.exe|6864:5005832|DeviceLinkListener.c:_cop yMobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 17:19:00.935|AppleMobileDeviceHelper.exe|6864:5005832|DeviceLinkListener.c:_set MobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 17:19:00.935|AppleMobileDeviceHelper.exe|6864:5005832|AppleMobileDeviceHelper.m :_setTetheredSyncLockdownInfoForTarget| ERROR: Could not set tethered sync info (<CFBasicHash 0399B340 [72018078]>{type = mutable dict, count = 1,
entries =>
2 : <CFString 038D8748 [72018078]>{contents = "SyncingOS"} = <CFString 0050B898 [72018078]>{contents = "iPhone"}
) in lockdown for com.apple.Bookmarks (Bookmarks): -402653052
2013-03-10 17:19:10.940|AppleMobileDeviceHelper.exe|6864:5005832|AppleMobileDeviceHelper.m :_getDisabledDataClassNamesFromLockdownForTarget| ERROR: Could not find a device with the target identifier 0c6ca7429ebe24f88ce82412f1ffa38605299155. Assuming there are no disabled data classes.
2013-03-10 17:33:37.265|AppleMobileDeviceHelper.exe|6864:5005832|DeviceLinkListener.c:_cop yMobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 17:33:37.267|AppleMobileDeviceHelper.exe|6864:5005832|DeviceLinkListener.c:_set MobileDeviceValue| ERROR: Could not connect to attached device: kAMDDeviceDisconnectedError (132)
2013-03-10 17:33:37.268|AppleMobileDeviceHelper.exe|6864:5005832|AppleMobileDeviceHelper.m :_setTetheredSyncLockdownInfoForTarget| ERROR: Could not set tethered sync info (<CFBasicHash 0399BFB8 [72018078]>{type = mutable dict, count = 1,
entries =>
2 : <CFString 038D8748 [72018078]>{contents = "SyncingOS"} = <CFString 0050B898 [72018078]>{contents = "iPhone"}
) in lockdown for com.apple.Bookmarks (Bookmarks): -402653052
2013-03-10 17:33:47.276|AppleMobileDeviceHelper.exe|6864:5005832|AppleMobileDeviceHelper.m :_getDisabledDataClassNamesFromLockdownForTarget| ERROR: Could not find a device with the target identifier 0c6ca7429ebe24f88ce82412f1ffa38605299155. Assuming there are no disabled data classes.
Any ideas?I disabled the builtin WiFi adapter for my HP desktop (Ralink).
Then used a Buffalo USB WiFi adapter.
Since I made that change I haven't had any problems getting my iPhone to connect to iTunes. -
General Warning! [Ralink chipset + Windows 7 64bit + 4GB RAM = driver crash]
I just wanted to put a general warning out there.
There seems to be a pretty big problem with Ralink drivers right now, even ones automatically downloaded from Windows Update for at least 3 Ralink Chipset groups.
The problem:
There's some kind of messup when certain environments are the same. Windows 7 64 bit and over 3GB of RAM and a Ralink Wireless card/usb device. Once these variables are the same, most ralink wireless drivers will crash. The crash is very sneaky, it simply looks like your wireless connection has been switched to limited, however the wireless system can't and won't recover. You can try to disconnect or connect to another wireless system, but this doesn't work. You also won't be able to shut down or restart your machine, even after log off. If you do try and let the computer wait it out, eventually it will blue screen and reboot after a very long time.
This happens when the system transfers a significant amount of data or sometimes at a certain speed. For me it happened whenever I xfered a certain amount of data or once the card hit 5 MB speeds. But it varies with driver version and system. Sometimes it seemed random and just happened while surfing.
I have 2 usb devices with the ralink chipset and I've been able to reproduce the crashes everytime on several machines. The ONLY machine that does not mess up is a laptop with 2GB of RAM.
I decided to make this general warning, because I imagine some people are blaming their routers for the problem. I've read several posts on here where people have these symptoms and assume that it's their router.
The only fix/workaround right now is to remove some RAM, which of course isn't entirely convenient. I've contacted Ralink about it and heard nothing back, so I don't know if they've identified it as a problem or not yet. The other option is to get a usb device or card with another chipset brand....I purchased a usb device with the atheros chipset (the only cheap alternative to ralink, all the others are slightly more expensive) and that usb device worked PERFECTLY.
If you are using a pci card or usb device with a Ralink chipset and the computer specs I've mentioned and it actually WORKS, I'd love to hear from you right here. Remember, it has to be a Windows 7 64 bit system and 4GB or more of RAM. Make sure the system is 4GB and not 3.x because of an onboard GPU. The problem MAY happen on Vista as well, but I haven't tested it...all my systems are running 7.Affected driver as of 10/31/2009
09/25/2009
2K/XP:1.4.7.0
Vista:2.3.7.0
Win7:3.0.7.0 [This is the only driver I've tested for Windows 7]
for chipset:
USB (RT2870 /RT2770 /RT307X /RT2070 /RT3572)
Message Edited by neoprimal on 10-30-2009 09:27 PM -
Ralink RT5390 Does Not Work on the UEK Kernel
We installed OL6.3 and Ubuntu 12.04 on a new Asus X45A notebook. It has a Ralink RT5390 wireless card. With Ubuntu, both wifi and video work flawlessly. However, the wifi driver (from elrepo) does not work for the the uek kernel (2.6.39). While the wifi driver works when boot into the RHEL kernel (2.6.32), it created an "even bigger problem" in that the video starts at about 1/10 from the left edge of the screen.
As a result, we can only boot into Ubuntu on this new notebook, but we would like to use the uek kernel. Any suggestion will be appreciated.Dude wrote:
It wouldn't surprise me if was more power efficient because half your hardware, e.g. wireless apparently isn't working ;-) I have three notebooks running OL6. Wireless works on all three of them. (One of the notebooks its wireless has problem with the UEK kernel, but no problem with the RHEL kernel.)
However, power management support means computer sleep and idle functions to slow down your computer's power
consumption when it is not needed, e.g. down clock your CPU and slow down your hardware, dim your screen, etc.
when running on battery, etc.This needs further verification, but all these functions seem to be working with OL6.
But again, please no one be fooled by my overly optimistic and simplistic comments*. The reality is, I am glad OL6 desktop works at all.
* For example, I actually installed OL6 on 4 notebooks, one of them "does not work" because I couldn't dim the screen. I did not intend to lie, but subconsciously, I somewhat forgot that there was this failed case.
Edited by: Ping-Wu on Dec 19, 2012 7:48 AM -
Mac Mini KVM USB problem prevents boot when using certain USB ports
Hi,
Just purchased a brand new Mac Mini 2.4 Quad Core to use as a server.
This morning we removed from the box & connected it to our NTI Unimux 16-port KVM. The KVM already has 10 Mac Mini's connected (various vintages, no problems).
We connected the Mini to the KVM using HDMI for video and a USB connector.
The Mini initially refused to boot past the initial white/gray screen. It never got to the Apple or the cog.
However, we found that if the USB cable from the KVM is disconnected, the Mac Mini booted immediately.
Further, the Mini will also boot with an Apple keyboard connected.
So... you may assume that the KVM cable is bad or that there is some firmware compatability issue between the KVM and this new Mac Mini.
EXCEPT...
This Mini has 4 USB ports.
We found that the Mac Mini can boot with the KVM USB cable connected if the USB cable is connected to USB ports 2 or 4 on the Mac Mini.
If the KVM USB is connected to ports 1 or 3 on the Mini, the Mini will not boot.
The Mac Mini will boot with an Apple USB keyboard installed on any port.
Is there any logical reason for this behavior?
Thanks,
bHello,
Great work & very interesting thanks!
My guess is mA available & mA required, chect System Teport>Hardware>USB for like this...
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8207
Vendor ID: 0x05ac (Apple Computer, Inc.)
General Purpose USB Hub:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Product ID: 0x2077
Vendor ID: 0x0451
802.11 n WLAN:
Version: 1.01
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Ralink
Product ID: 0x5372
Serial Number: 1.0
Vendor ID: 0x148f
MegeCam:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: MGI
Product ID: 0x8007
Vendor ID: 0x060b
Maybe you are looking for
-
I have master suite cs6. on mac osx. bridge has been quitting unexpectedly. Also, getting message at start up that states that "bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to
-
JVM Error while launching SOA installation
Hello Everyone I am not able to launch the installation for SOA suite 11g on windows server 2003.When i click on setup i get following error: Java Virtual Machine Launcher Could Not find main class.Program Will exit. Please help! Thanks Chinmay
-
How to (backward) integrate Resources from MRS (7.0) to CS-orders
Hello All, Does anybody know how to (backward) integrate resources in CS-orders in MRS 7.0? solved
-
Working with InDesign and Microsoft Access Databases
I was wondering if there's anyway to synchronize Adobe InDesign with Microsoft Access in a way that when changes are made to the INDD file they would automatically be updated in the database. Does Anyone have any ideas on this? Is there a third par
-
Over-ride Windows NT Authentication
Hi All, I want to know something about Windows NT Authentication. What is the URL when the user is directly logged in to the Portal. Can I parameterize the URL. Is it possible to override the Windows NT Authentication by giving the user parameter in